Instalacja Archa (Anarchy 1.0.8) - wirtualnie i "normalnie"

[MójPan]

No to pora na powagę, w poprzednich moich tematach tylko upewniałem sie czy "mi warto", z czasem uznałem że warto dlatego startujemy.
Wybór spośród distro padł na Archa, postanowiłem skorzystać z Anarchy aby ułatwić sobie strat.
No i na początku wyglada to tak:

Próbowałem wystartować w VirtualBoxie, ale dzieją się cuda z internetem. VirtualBox 5.2 posstawiony na Mnit'cie 19.2.
Internet to modem hilink Huawei, działa jako sieciówka, internet mam od razu po uruchomieniu modemu w USB.
Sprzęt to Lenovo L540.

Internet działa mi prawidłowo ale mam chyba problem z VirtualBoxem. Guest widzi urzadzenia podłączone do USB, prawidłowo rozpoznaje mysz Logitecha, klawiaturę Della i modem jako Huawei-Eth0.

Do czasu odpalenia instalatora Archa, wszystko jest ok lecz gdy tylko wybieram z listy Instaluj ARCHA modem resetuje się, to znaczy znika mi internet na matce (w Mincie), modem nadal świeci ciągłą niebieską LED co wskazuje że jest on-line w Lte. Niby wszystko ok, lecz Arch nie widzi internetu, nie przechodzą testy połączenia itp. itd.

Zanim jednak poświęcę dysk i dokonam "żywej" instalacji chciałbym pobawić się Archem w wirtualce.
Nadmienię, że żadne inne distro Linuksa prócz Archa i Debiana nie mają problemów z wykryciem modemu. Tylko Debian i Arch go nie widzą, nie wiem jak to ugryźć.
Przyznam też, że nie próbowałem jeszcze odpalić instalatora Archa z PENa i sprawdzić czy bez VirtualBoxa zobaczy internet, zaraz to sprawdzę, przyszykuję tylko nośnik a sam temat już zapodaję bo wiem że Arch miał problemy z modemem, zatem jestem na 98% pewien że internetu nie zobaczy, upewnię się jednak jeszcze raz ale na 100%.

Czemu VBOX resetuje mi modem?
Dziwna sprawa jest taka iż mam też Winszajs7 obok, tam nic się nie dzieje, gdy winszajs w wirtualce używa internetu, Mint go nie gubi.

[pavbaranov]

Pomieszanie z poplątaniem, ale odpal sobie z pendrive Anarchy. Wykrywa modem/net? (Inna sprawa, że gorąco polecam instalację po kablu i takie połączenie i podłączenie, a jakiekolwiek inne niekiedy wymagają zmian przed instalacją). Jaki to modem? O ile widzę dobrze Huawei Hilink to jest jakaś apka, która podłącza jakieś urządzenie Huawei jako modem. Dalej jednak pozostaje - co to za modem, jak podłączony itd.

[MójPan]

Modem E3372-h2 ale na razie ujadam sie z odpaleniem Archa, słynne "waiting 30 seconds for device sdd" mnie dopadło.

[MójPan]

Dobra, modem jest, zatrybił. Testy sieci pomyślne, instalator też już ogarnąłem, okazało się że Arch "pożarł się" z aktywnym CSM w UEFI, wyłączyłem i jest cacy. Rano biorę się za instalację.

[MójPan]

Mógłby zerknąć ktoś fachowym okiem na poniższe posty i powiedzieć czy widzi jakieś problemy??
Sorry że w kilku postach ale na forum są ograniczenia do 20000 znaków na post

Kod: [Zaznacz]

0.000000] Linux version 5.3.7-arch1-2-ARCH (linux@archlinux) (gcc version 9.2.0 (GCC)) #1 SMP PREEMPT @1572002934
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d85f9ee1-6ef2-4e99-b4e6-610872bc2838 rw loglevel=3
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000008bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008c000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf0a3fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf0a4000-0x00000000cf2a5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cf2a6000-0x00000000da532fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da533000-0x00000000da732fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000da733000-0x00000000dce22fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dce23000-0x00000000dcf7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dcf7f000-0x00000000dcffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dcfff000-0x00000000dcffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by Lenovo
[    0.000000] efi:  ACPI=0xdcffe000  ACPI 2.0=0xdcffe014  SMBIOS=0xdce22000  ESRT=0xda901000 
[    0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries:
[    0.000000] efi: mem47: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
[    0.000000] efi: mem48: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
[    0.000000] efi: mem49: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
[    0.000000] efi: mem50: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
[    0.000000] efi: mem51: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
[    0.000000] efi: mem52: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
[    0.000000] efi: mem53: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
[    0.000000] efi: Removing 7 invalid memory map entries.
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 20AVA04UPB/20AVA04UPB, BIOS J4ET91WW(1.91) 03/06/2018
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2594.110 MHz processor
[    0.001599] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001600] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001606] last_pfn = 0x21f600 max_arch_pfn = 0x400000000
[    0.001609] MTRR default type: write-back
[    0.001610] MTRR fixed ranges enabled:
[    0.001611]   00000-9FFFF write-back
[    0.001612]   A0000-BFFFF uncachable
[    0.001613]   C0000-FFFFF write-protect
[    0.001614] MTRR variable ranges enabled:
[    0.001615]   0 base 00E0000000 mask 7FE0000000 uncachable
[    0.001616]   1 base 00DE000000 mask 7FFE000000 uncachable
[    0.001617]   2 base 00DD000000 mask 7FFF000000 uncachable
[    0.001617]   3 disabled
[    0.001618]   4 disabled
[    0.001618]   5 disabled
[    0.001619]   6 disabled
[    0.001619]   7 disabled
[    0.001620]   8 disabled
[    0.001620]   9 disabled
[    0.001925] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002093] last_pfn = 0xdd000 max_arch_pfn = 0x400000000
[    0.010022] esrt: Reserving ESRT space from 0x00000000da901000 to 0x00000000da901060.
[    0.010029] check: Scanning 1 areas for low memory corruption
[    0.010032] Using GB pages for direct mapping
[    0.010034] BRK [0x193001000, 0x193001fff] PGTABLE
[    0.010036] BRK [0x193002000, 0x193002fff] PGTABLE
[    0.010037] BRK [0x193003000, 0x193003fff] PGTABLE
[    0.010081] BRK [0x193004000, 0x193004fff] PGTABLE
[    0.010082] BRK [0x193005000, 0x193005fff] PGTABLE
[    0.010294] BRK [0x193006000, 0x193006fff] PGTABLE
[    0.010341] BRK [0x193007000, 0x193007fff] PGTABLE
[    0.010405] BRK [0x193008000, 0x193008fff] PGTABLE
[    0.010494] BRK [0x193009000, 0x193009fff] PGTABLE
[    0.010549] BRK [0x19300a000, 0x19300afff] PGTABLE
[    0.010617] Secure boot could not be determined
[    0.010618] RAMDISK: [mem 0x35d9d000-0x36ec5fff]
[    0.010622] ACPI: Early table checksum verification disabled

[MójPan]

Kod: [Zaznacz]

0.010625] ACPI: RSDP 0x00000000DCFFE014 000024 (v02 LENOVO)
[    0.010628] ACPI: XSDT 0x00000000DCFFE170 0000EC (v01 LENOVO TP-J4    00001910 PTEC 00000002)
[    0.010633] ACPI: FACP 0x00000000DCFFA000 00010C (v05 LENOVO TP-J4    00001910 PTEC 00000002)
[    0.010638] ACPI: DSDT 0x00000000DCFE6000 00F7C6 (v01 LENOVO TP-J4    00001910 INTL 20120711)
[    0.010641] ACPI: FACS 0x00000000DCF6A000 000040
[    0.010643] ACPI: SLIC 0x00000000DCFFD000 000176 (v01 LENOVO TP-J4    00001910 PTEC 00000001)
[    0.010646] ACPI: ASF! 0x00000000DCFFC000 0000A5 (v32 LENOVO TP-J4    00001910 PTEC 00000002)
[    0.010648] ACPI: HPET 0x00000000DCFF9000 000038 (v01 LENOVO TP-J4    00001910 PTEC 00000002)
[    0.010651] ACPI: LPIT 0x00000000DCFF8000 000094 (v01 LENOVO TP-J4    00001910 PTEC 00000002)
[    0.010653] ACPI: APIC 0x00000000DCFF7000 000098 (v01 LENOVO TP-J4    00001910 PTEC 00000002)
[    0.010656] ACPI: MCFG 0x00000000DCFF6000 00003C (v01 LENOVO TP-J4    00001910 PTEC 00000002)
[    0.010658] ACPI: SSDT 0x00000000DCFE5000 00082F (v01 LENOVO SataAhci 00001000 INTL 20120711)
[    0.010661] ACPI: SSDT 0x00000000DCFE4000 000200 (v01 LENOVO sensrhub 00000000 INTL 20120711)
[    0.010664] ACPI: SSDT 0x00000000DCFE3000 00019A (v01 LENOVO Sata0Ide 00001000 INTL 20120711)
[    0.010666] ACPI: SSDT 0x00000000DCFE2000 000180 (v01 LENOVO Sata1Ide 00001000 INTL 20120711)
[    0.010669] ACPI: SSDT 0x00000000DCFE1000 000539 (v01 LENOVO Cpu0Ist  00003000 INTL 20120711)
[    0.010671] ACPI: SSDT 0x00000000DCFE0000 000AD8 (v01 LENOVO CpuPm    00003000 INTL 20120711)
[    0.010674] ACPI: SSDT 0x00000000DCFDC000 00358E (v01 LENOVO SaSsdt   00003000 INTL 20120711)
[    0.010676] ACPI: SSDT 0x00000000DCFDB000 00036F (v01 LENOVO CppcTabl 00001000 INTL 20120711)
[    0.010679] ACPI: PCCT 0x00000000DCFDA000 00006E (v05 LENOVO TP-J4    00001910 PTEC 00000002)
[    0.010681] ACPI: SSDT 0x00000000DCFD9000 000AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL 20120711)
[    0.010684] ACPI: TCPA 0x00000000DCFD8000 000032 (v02 PTL    LENOVO   06040000 LNVO 00000001)
[    0.010687] ACPI: UEFI 0x00000000DCFD7000 000042 (v01 LENOVO TP-J4    00001910 PTEC 00000002)
[    0.010689] ACPI: MSDM 0x00000000DCED2000 000055 (v03 LENOVO TP-J4    00001910 PTEC 00000002)
[    0.010692] ACPI: BATB 0x00000000DCFD6000 000046 (v01 LENOVO TP-J4    00001910 PTEC 00000002)
[    0.010694] ACPI: FPDT 0x00000000DCFD5000 000064 (v01 LENOVO TP-J4    00001910 PTEC 00000002)
[    0.010696] ACPI: UEFI 0x00000000DCFD4000 0002F6 (v01 LENOVO TP-J4    00001910 PTEC 00000002)
[    0.010699] ACPI: DBGP 0x00000000DCFD3000 000034 (v01 LENOVO TP-J4    00001910 PTEC 00000002)
[    0.010702] ACPI: DMAR 0x00000000DCFD2000 0000B0 (v01 LENOVO TP-J4    00001910 PTEC 00000002)
[    0.010708] ACPI: Local APIC address 0xfee00000
[    0.010781] No NUMA configuration found
[    0.010782] Faking a node at [mem 0x0000000000000000-0x000000021f5fffff]
[    0.010785] NODE_DATA(0) allocated [mem 0x21f5fc000-0x21f5fffff]
[    0.010804] Zone ranges:
[    0.010805]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.010806]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.010807]   Normal   [mem 0x0000000100000000-0x000000021f5fffff]
[    0.010808]   Device   empty
[    0.010809] Movable zone start for each node
[    0.010809] Early memory node ranges
[    0.010810]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.010811]   node   0: [mem 0x0000000000059000-0x000000000008bfff]
[    0.010812]   node   0: [mem 0x0000000000100000-0x00000000cf0a3fff]
[    0.010813]   node   0: [mem 0x00000000cf2a6000-0x00000000da532fff]
[    0.010813]   node   0: [mem 0x00000000dcfff000-0x00000000dcffffff]
[    0.010814]   node   0: [mem 0x0000000100000000-0x000000021f5fffff]
[    0.010962] Zeroed struct page in unavailable ranges: 23876 pages
[    0.010963] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f5fffff]
[    0.010964] On node 0 totalpages: 2070716
[    0.010965]   DMA zone: 64 pages used for memmap
[    0.010966]   DMA zone: 72 pages reserved
[    0.010967]   DMA zone: 3978 pages, LIFO batch:0
[    0.011012]   DMA32 zone: 13901 pages used for memmap
[    0.011013]   DMA32 zone: 889650 pages, LIFO batch:63
[    0.020504]   Normal zone: 18392 pages used for memmap
[    0.020506]   Normal zone: 1177088 pages, LIFO batch:63
[    0.032179] Reserving Intel graphics memory at [mem 0xdda00000-0xdf9fffff]
[    0.032247] ACPI: PM-Timer IO Port: 0x1808
[    0.032249] ACPI: Local APIC address 0xfee00000
[    0.032255] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.032256] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.032266] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.032268] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.032269] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.032270] ACPI: IRQ0 used by override.
[    0.032271] ACPI: IRQ9 used by override.
[    0.032273] Using ACPI (MADT) for SMP configuration information
[    0.032274] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.032278] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.032293] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.032294] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.032295] PM: Registered nosave memory: [mem 0x0008c000-0x000bffff]
[    0.032296] PM: Registered nosave memory: [mem 0x000c0000-0x000dffff]
[    0.032296] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.032298] PM: Registered nosave memory: [mem 0xcf0a4000-0xcf2a5fff]
[    0.032299] PM: Registered nosave memory: [mem 0xda533000-0xda732fff]
[    0.032300] PM: Registered nosave memory: [mem 0xda733000-0xdce22fff]
[    0.032300] PM: Registered nosave memory: [mem 0xdce23000-0xdcf7efff]
[    0.032301] PM: Registered nosave memory: [mem 0xdcf7f000-0xdcffefff]
[    0.032302] PM: Registered nosave memory: [mem 0xdd000000-0xdf9fffff]
[    0.032303] PM: Registered nosave memory: [mem 0xdfa00000-0xf80f7fff]
[    0.032303] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
[    0.032304] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
[    0.032304] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.032305] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
[    0.032307] [mem 0xdfa00000-0xf80f7fff] available for PCI devices
[    0.032308] Booting paravirtualized kernel on bare hardware
[    0.032311] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.126365] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.126596] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[    0.126602] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[    0.126603] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.126623] Built 1 zonelists, mobility grouping on.  Total pages: 2038287
[    0.126624] Policy zone: Normal
[    0.126625] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d85f9ee1-6ef2-4e99-b4e6-610872bc2838 rw loglevel=3
[    0.127065] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.127266] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.127335] mem auto-init: stack:byref_all, heap alloc:off, heap free:off
[    0.130608] Calgary: detecting Calgary via BIOS EBDA area
[    0.130609] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.150042] Memory: 7948436K/8282864K available (12291K kernel code, 1321K rwdata, 3952K rodata, 1632K init, 3548K bss, 334428K reserved, 0K cma-reserved)
[    0.150162] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.150172] Kernel/User page tables isolation: enabled
[    0.150186] ftrace: allocating 37808 entries in 148 pages
[    0.163911] rcu: Preemptible hierarchical RCU implementation.
[    0.163912] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.163913] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.163914] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.163914] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.163915] 	Tasks RCU enabled.
[    0.163916] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.163916] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.165487] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[    0.165649] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.165711] random: get_random_bytes called from start_kernel+0x3ce/0x5a9 with crng_init=0
[    0.165735] Console: colour dummy device 80x25
[    0.165740] printk: console [tty0] enabled
[    0.165757] ACPI: Core revision 20190703
[    0.165920] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.165933] APIC: Switch to symmetric I/O mode setup
[    0.165935] DMAR: Host address width 39
[    0.165936] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.165941] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[    0.165942] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.165945] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[    0.165945] DMAR: RMRR base: 0x000000dafbd000 end: 0x000000dafd3fff
[    0.165946] DMAR: RMRR base: 0x000000dd800000 end: 0x000000df9fffff
[    0.165948] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.165949] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.165949] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.166363] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.166364] x2apic enabled
[    0.166370] Switched APIC routing to cluster x2apic.
[    0.166780] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.182600] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x25648013570, max_idle_ns: 440795335968 ns
[    0.182604] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.39 BogoMIPS (lpj=8647033)
[    0.182606] pid_max: default: 32768 minimum: 301
[    0.189797] LSM: Security Framework initializing
[    0.189800] Yama: becoming mindful.
[    0.189830] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.189842] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.189980] *** VALIDATE proc ***
[    0.190024] *** VALIDATE cgroup1 ***
[    0.190025] *** VALIDATE cgroup2 ***
[    0.190068] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.190079] process: using mwait in idle threads
[    0.190081] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.190082] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.190084] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.190086] Spectre V2 : Mitigation: Full generic retpoline
[    0.190086] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.190087] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.190088] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.190088] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.190089] Speculative Store Bypass: Vulnerable
[    0.190092] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.190255] Freeing SMP alternatives memory: 32K
[    0.191183] TSC deadline timer enabled
[    0.191186] smpboot: CPU0: Intel(R) Core(TM) i5-4300M CPU @ 2.60GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.209275] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.

[MójPan]

Kod: [Zaznacz]

.209291] ... version:                3
[    0.209291] ... bit width:              48
[    0.209292] ... generic registers:      4
[    0.209293] ... value mask:             0000ffffffffffff
[    0.209293] ... max period:             00007fffffffffff
[    0.209294] ... fixed-purpose events:   3
[    0.209294] ... event mask:             000000070000000f
[    0.215951] rcu: Hierarchical SRCU implementation.
[    0.239456] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.245940] smp: Bringing up secondary CPUs ...
[    0.285949] x86: Booting SMP configuration:
[    0.285950] .... node  #0, CPUs:      #1
[    0.286272] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.325949]  #2 #3
[    0.366246] smp: Brought up 1 node, 4 CPUs
[    0.366246] smpboot: Max logical packages: 2
[    0.366246] smpboot: Total of 4 processors activated (20761.58 BogoMIPS)
[    0.367377] devtmpfs: initialized
[    0.367377] x86/mm: Memory block size: 128MB
[    0.367377] PM: Registering ACPI NVS region [mem 0xdce23000-0xdcf7efff] (1425408 bytes)
[    0.367377] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.367377] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.367377] pinctrl core: initialized pinctrl subsystem
[    0.367377] PM: RTC time: 05:53:01, date: 2019-10-29
[    0.367377] NET: Registered protocol family 16
[    0.367377] audit: initializing netlink subsys (disabled)
[    0.367377] audit: type=2000 audit(1572328381.199:1): state=initialized audit_enabled=0 res=1
[    0.367377] cpuidle: using governor ladder
[    0.369278] cpuidle: using governor menu
[    0.369278] Detected 1 PCC Subspaces
[    0.369291] Registering PCC driver as Mailbox controller
[    0.369326] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.369326] ACPI: bus type PCI registered
[    0.369328] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.369512] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.369518] PCI: not using MMCONFIG
[    0.369518] PCI: Using configuration type 1 for base access
[    0.369518] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.369590] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.370033] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.370033] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.372696] ACPI: Added _OSI(Module Device)
[    0.372697] ACPI: Added _OSI(Processor Device)
[    0.372698] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.372698] ACPI: Added _OSI(Processor Aggregator Device)
[    0.372699] ACPI: Added _OSI(Linux-Dell-Video)
[    0.372700] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.372701] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.391423] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.393190] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.394406] ACPI: Dynamic OEM Table Load:
[    0.394413] ACPI: SSDT 0xFFFF9E8C55BDD000 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.395639] ACPI: Dynamic OEM Table Load:
[    0.395646] ACPI: SSDT 0xFFFF9E8C55B80000 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.396935] ACPI: Dynamic OEM Table Load:
[    0.396941] ACPI: SSDT 0xFFFF9E8C55593200 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.398709] ACPI: EC: EC started
[    0.398710] ACPI: EC: interrupt blocked
[    0.827374] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
[    0.827376] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.827377] ACPI: \_SB_.PCI0.LPCB.H_EC: Boot DSDT EC used to handle transactions
[    0.827377] ACPI: Interpreter enabled
[    0.827411] ACPI: (supports S0 S3 S4 S5)
[    0.827412] ACPI: Using IOAPIC for interrupt routing
[    0.827443] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.827991] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.828000] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.828352] ACPI: Enabled 10 GPEs in block 00 to 3F
[    0.829739] ACPI: Power Resource [PUBS] (off)
[    0.836306] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
[    0.841354] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.841359] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.841464] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.842307] PCI host bridge to bus 0000:00
[    0.842309] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.842310] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.842312] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.842313] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[    0.842314] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.842323] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    0.842523] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[    0.842533] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.842539] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.842542] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.842554] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.842738] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.842747] pci 0000:00:03.0: reg 0x10: [mem 0xf2400000-0xf2403fff 64bit]
[    0.842960] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.842980] pci 0000:00:16.0: reg 0x10: [mem 0xf2409000-0xf240900f 64bit]
[    0.843039] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.843222] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.843242] pci 0000:00:1a.0: reg 0x10: [mem 0xf240e000-0xf240e3ff]
[    0.843320] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.843504] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.843523] pci 0000:00:1b.0: reg 0x10: [mem 0xf2404000-0xf2407fff 64bit]
[    0.843589] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.843767] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.843842] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.844079] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[    0.844157] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.844343] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[    0.844419] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.844606] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.844627] pci 0000:00:1d.0: reg 0x10: [mem 0xf240d000-0xf240d3ff]
[    0.844705] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.844889] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[    0.845158] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    0.845174] pci 0000:00:1f.2: reg 0x10: [io  0x5088-0x508f]
[    0.845181] pci 0000:00:1f.2: reg 0x14: [io  0x5094-0x5097]
[    0.845188] pci 0000:00:1f.2: reg 0x18: [io  0x5080-0x5087]
[    0.845195] pci 0000:00:1f.2: reg 0x1c: [io  0x5090-0x5093]
[    0.845201] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
[    0.845208] pci 0000:00:1f.2: reg 0x24: [mem 0xf240c000-0xf240c7ff]
[    0.845242] pci 0000:00:1f.2: PME# supported from D3hot
[    0.845415] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.845433] pci 0000:00:1f.3: reg 0x10: [mem 0xf2408000-0xf24080ff 64bit]
[    0.845451] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.845680] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.845743] acpiphp: Slot [1] registered
[    0.845748] pci 0000:00:1c.2: PCI bridge to [bus 02-06]
[    0.845751] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.845755] pci 0000:00:1c.2:   bridge window [mem 0xf1c00000-0xf23fffff]
[    0.845760] pci 0000:00:1c.2:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.845811] acpiphp: Slot [1-1] registered
[    0.845864] pci 0000:07:00.0: [10ec:5227] type 00 class 0xff0000
[    0.845964] pci 0000:07:00.0: reg 0x10: [mem 0xf1400000-0xf1400fff]
[    0.846297] pci 0000:07:00.0: supports D1 D2
[    0.846298] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.855981] pci 0000:00:1c.4: PCI bridge to [bus 07-0b]
[    0.855984] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.855987] pci 0000:00:1c.4:   bridge window [mem 0xf1400000-0xf1bfffff]
[    0.855992] pci 0000:00:1c.4:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.857114] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.857175] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.857234] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.857293] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.857351] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.857409] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.857468] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.857525] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.857939] ACPI: EC: interrupt unblocked
[    0.857946] ACPI: EC: event unblocked
[    0.857952] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.857954] ACPI: \_SB_.PCI0.LPCB.H_EC: Boot DSDT EC used to handle transactions and events
[    0.858031] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.858031] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.858031] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.858031] vgaarb: loaded
[    0.858031] ACPI: bus type USB registered
[    0.858031] usbcore: registered new interface driver usbfs
[    0.858031] usbcore: registered new interface driver hub
[    0.858031] usbcore: registered new device driver usb
[    0.858031] pps_core: LinuxPPS API ver. 1 registered
[    0.858031] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.858031] PTP clock support registered
[    0.858031] EDAC MC: Ver: 3.0.0
[    0.858031] Registered efivars operations
[    0.858031] PCI: Using ACPI for IRQ routing
[    0.858031] PCI: pci_cache_line_size set to 64 bytes
[    0.858031] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.858031] e820: reserve RAM buffer [mem 0x0008c000-0x0008ffff]
[    0.858031] e820: reserve RAM buffer [mem 0xcf0a4000-0xcfffffff]
[    0.858031] e820: reserve RAM buffer [mem 0xda533000-0xdbffffff]
[    0.858031] e820: reserve RAM buffer [mem 0xdd000000-0xdfffffff]
[    0.858031] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
[    0.859271] NetLabel: Initializing
[    0.859271] NetLabel:  domain hash size = 128
[    0.859271] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.859271] NetLabel:  unlabeled traffic allowed by default
[    0.859298] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.859301] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.861343] clocksource: Switched to clocksource tsc-early
[    0.869598] VFS: Disk quotas dquot_6.6.0
[    0.869615] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.869640] *** VALIDATE hugetlbfs ***
[    0.869679] pnp: PnP ACPI init
[    0.869868] system 00:00: [io  0x06a4] has been reserved
[    0.869870] system 00:00: [io  0x06a0] has been reserved
[    0.869875] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.869989] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.869990] system 00:01: [io  0xffff] has been reserved
[    0.869992] system 00:01: [io  0xffff] has been reserved
[    0.869993] system 00:01: [io  0xffff] has been reserved
[    0.869994] system 00:01: [io  0x0800-0x08fe] has been reserved
[    0.869995] system 00:01: [io  0x0900-0x09fe] has been reserved
[    0.869996] system 00:01: [io  0x0a00-0x0afe] has been reserved
[    0.869997] system 00:01: [io  0x0b00-0x0bfe] has been reserved
[    0.869998] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.870000] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.870002] system 00:01: [mem 0xfe800000-0xfe80ffff] has been reserved
[    0.870005] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.870026] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.870074] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.870077] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.870095] pnp 00:04: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[    0.870111] pnp 00:05: Plug and Play ACPI device, IDs LEN2004 PNP0f13 (active)
[    0.870267] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.870268] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.870269] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.870271] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.870272] system 00:06: [mem 0xf8000000-0xfbffffff] could not be reserved
[    0.870273] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.870274] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.870275] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.870277] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.870278] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.870279] system 00:06: [mem 0xffffffff-0x100000ffe] could not be reserved
[    0.870282] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.870743] pnp 00:07: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[    0.870995] pnp: PnP ACPI: found 8 devices

[MójPan]

Kod: [Zaznacz]

0.872051] thermal_sys: Registered thermal governor 'fair_share'
[    0.872052] thermal_sys: Registered thermal governor 'bang_bang'
[    0.872052] thermal_sys: Registered thermal governor 'step_wise'
[    0.872053] thermal_sys: Registered thermal governor 'user_space'
[    0.872053] thermal_sys: Registered thermal governor 'power_allocator'
[    0.876583] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.876611] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.876624] pci 0000:00:1c.2: PCI bridge to [bus 02-06]
[    0.876627] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.876631] pci 0000:00:1c.2:   bridge window [mem 0xf1c00000-0xf23fffff]
[    0.876635] pci 0000:00:1c.2:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.876640] pci 0000:00:1c.4: PCI bridge to [bus 07-0b]
[    0.876643] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.876647] pci 0000:00:1c.4:   bridge window [mem 0xf1400000-0xf1bfffff]
[    0.876650] pci 0000:00:1c.4:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.876656] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.876657] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.876658] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.876659] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window]
[    0.876661] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.876662] pci_bus 0000:02: resource 1 [mem 0xf1c00000-0xf23fffff]
[    0.876663] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.876664] pci_bus 0000:07: resource 0 [io  0x3000-0x3fff]
[    0.876665] pci_bus 0000:07: resource 1 [mem 0xf1400000-0xf1bfffff]
[    0.876666] pci_bus 0000:07: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.876793] NET: Registered protocol family 2
[    0.876910] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.876920] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.876978] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.877084] TCP: Hash tables configured (established 65536 bind 65536)
[    0.877108] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.877124] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.877175] NET: Registered protocol family 1
[    0.877179] NET: Registered protocol family 44
[    0.877187] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.877532] PCI: CLS 64 bytes, default 64
[    0.877563] Trying to unpack rootfs image as initramfs...
[    1.127099] Freeing initrd memory: 17572K
[    1.142633] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.142635] software IO TLB: mapped [mem 0xc927a000-0xcd27a000] (64MB)
[    1.142740] check: Scanning for low memory corruption every 60 seconds
[    1.143057] Initialise system trusted keyrings
[    1.143064] Key type blacklist registered
[    1.143105] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    1.144220] zbud: loaded
[    1.149321] Key type asymmetric registered
[    1.149323] Asymmetric key parser 'x509' registered
[    1.149331] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    1.149367] io scheduler mq-deadline registered
[    1.149368] io scheduler kyber registered
[    1.149393] io scheduler bfq registered
[    1.150022] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.150088] efifb: probing for efifb
[    1.150099] efifb: No BGRT, not showing boot graphics
[    1.150100] efifb: framebuffer at 0xe0000000, using 1216k, total 1216k
[    1.150101] efifb: mode is 640x480x32, linelength=2560, pages=1
[    1.150102] efifb: scrolling: redraw
[    1.150103] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.150140] fbcon: Deferring console take-over
[    1.150141] fb0: EFI VGA frame buffer device
[    1.150148] intel_idle: MWAIT substates: 0x42120
[    1.150148] intel_idle: v0.4.1 model 0x3C
[    1.150322] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.150393] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.152625] ACPI: Lid Switch [LID0]
[    1.152658] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.155981] ACPI: Sleep Button [SLPB]
[    1.156024] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.159285] ACPI: Power Button [PWRF]
[    1.160107] thermal LNXTHERM:00: registered as thermal_zone0
[    1.160108] ACPI: Thermal Zone [TZS0] (48 C)
[    1.160348] thermal LNXTHERM:01: registered as thermal_zone1
[    1.160349] ACPI: Thermal Zone [TZS1] (39 C)
[    1.160527] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.161006] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.161007] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    1.161404] usbcore: registered new interface driver usbserial_generic
[    1.161408] usbserial: USB Serial support registered for generic
[    1.161425] rtc_cmos 00:02: RTC can wake from S4
[    1.161559] rtc_cmos 00:02: registered as rtc0
[    1.161572] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.161620] intel_pstate: Intel P-state driver initializing
[    1.161836] ledtrig-cpu: registered to indicate activity on CPUs
[    1.162432] NET: Registered protocol family 10
[    1.176631] Segment Routing with IPv6
[    1.176651] NET: Registered protocol family 17
[    1.176886] RAS: Correctable Errors collector initialized.
[    1.176923] microcode: sig=0x306c3, pf=0x10, revision=0x24
[    1.176974] microcode: Microcode Update Driver: v2.2.
[    1.176983] sched_clock: Marking stable (1176706584, 264377)->(1203531790, -26560829)
[    1.177083] registered taskstats version 1
[    1.177091] Loading compiled-in X.509 certificates
[    1.179865] Loaded X.509 cert 'Build time autogenerated kernel key: 6c1fc4794a06a007a4da1111f99d44566c225d05'
[    1.179882] zswap: loaded using pool lzo/zbud
[    1.184569] Key type big_key registered
[    1.184918] PM:   Magic number: 7:73:872
[    1.185000] rtc_cmos 00:02: setting system clock to 2019-10-29T05:53:02 UTC (1572328382)
[    1.185909] Freeing unused decrypted memory: 2040K
[    1.186161] Freeing unused kernel image memory: 1632K
[    1.209404] Write protecting the kernel read-only data: 18432k
[    1.210186] Freeing unused kernel image memory: 2012K
[    1.210317] Freeing unused kernel image memory: 144K
[    1.223603] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.223604] x86/mm: Checking user space page tables
[    1.232013] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.232014] Run /init as init process
[    1.271493] fbcon: Taking over console
[    1.271546] Console: switching to colour frame buffer device 80x30
[    1.318301] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.321241] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.321302] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.328080] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.329250] ehci-pci: EHCI PCI platform driver
[    1.329438] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.329446] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.329458] ehci-pci 0000:00:1a.0: debug port 2
[    1.333380] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.333397] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf240e000
[    1.334636] SCSI subsystem initialized
[    1.341242] libata version 3.00 loaded.
[    1.344756] ahci 0000:00:1f.2: version 3.0
[    1.344974] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x11 impl SATA mode
[    1.344977] ahci 0000:00:1f.2: flags: 64bit ncq ilck pm led clo pio slum part ems apst 
[    1.345953] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.346008] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    1.346010] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.346011] usb usb1: Product: EHCI Host Controller
[    1.346013] usb usb1: Manufacturer: Linux 5.3.7-arch1-2-ARCH ehci_hcd
[    1.346014] usb usb1: SerialNumber: 0000:00:1a.0
[    1.346135] hub 1-0:1.0: USB hub found
[    1.346141] hub 1-0:1.0: 3 ports detected
[    1.346449] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.346455] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.346466] ehci-pci 0000:00:1d.0: debug port 2
[    1.350378] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.350395] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf240d000
[    1.353067] scsi host0: ahci
[    1.353194] scsi host1: ahci
[    1.353287] scsi host2: ahci
[    1.353381] scsi host3: ahci
[    1.353494] scsi host4: ahci
[    1.353536] ata1: SATA max UDMA/133 abar m2048@0xf240c000 port 0xf240c100 irq 30
[    1.353537] ata2: DUMMY
[    1.353538] ata3: DUMMY
[    1.353539] ata4: DUMMY
[    1.353541] ata5: SATA max UDMA/133 abar m2048@0xf240c000 port 0xf240c300 irq 30
[    1.362616] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.362746] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    1.362748] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.362749] usb usb2: Product: EHCI Host Controller
[    1.362750] usb usb2: Manufacturer: Linux 5.3.7-arch1-2-ARCH ehci_hcd
[    1.362751] usb usb2: SerialNumber: 0000:00:1d.0
[    1.362864] hub 2-0:1.0: USB hub found
[    1.362870] hub 2-0:1.0: 3 ports detected
[    1.366359] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.666829] ata1: SATA link down (SStatus 0 SControl 300)
[    1.670267] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.671691] ata5.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.671697] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.672671] ata5.00: ATA-8: HGST HTS545032A7E380, GGBZBF40, max UDMA/133
[    1.672676] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.674058] ata5.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.674064] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.675007] ata5.00: configured for UDMA/133
[    1.675399] scsi 4:0:0:0: Direct-Access     ATA      HGST HTS545032A7 BF40 PQ: 0 ANSI: 5
[    1.675997] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.683793] sd 4:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.683798] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    1.683818] sd 4:0:0:0: [sda] Write Protect is off
[    1.683822] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.683841] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.692701] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.823428] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
[    1.823433] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.823932] hub 1-1:1.0: USB hub found
[    1.824091] hub 1-1:1.0: 6 ports detected
[    1.840013] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
[    1.840018] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.840526] hub 2-1:1.0: USB hub found
[    1.840715] hub 2-1:1.0: 8 ports detected
[    2.020912]  sda: sda1 sda2 sda3
[    2.021742] sd 4:0:0:0: [sda] Attached SCSI disk
[    2.102684] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[    2.122672] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[    2.166061] tsc: Refined TSC clocksource calibration: 2593.983 MHz
[    2.166083] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25640843b7b, max_idle_ns: 440795302848 ns
[    2.166136] clocksource: Switched to clocksource tsc
[    2.200711] usb 1-1.2: New USB device found, idVendor=14cd, idProduct=8601, bcdDevice= 0.00
[    2.200716] usb 1-1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[    2.200720] usb 1-1.2: Product: USB 2.0 Hub            
[    2.200723] usb 1-1.2: Manufacturer: USB Device  
[    2.201127] hub 1-1.2:1.0: USB hub found
[    2.201289] hub 1-1.2:1.0: 4 ports detected
[    2.225213] usb 2-1.1: New USB device found, idVendor=125f, idProduct=db8a, bcdDevice=11.00
[    2.225216] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.225218] usb 2-1.1: Product: ADATA USB Flash Drive
[    2.225220] usb 2-1.1: Manufacturer: ADATA
[    2.225222] usb 2-1.1: SerialNumber: 15523161423300DF
[    2.231198] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[    2.231363] scsi host5: usb-storage 2-1.1:1.0
[    2.231451] usbcore: registered new interface driver usb-storage
[    2.233168] usbcore: registered new interface driver uas
[    2.299385] usb 2-1.2: new low-speed USB device number 4 using ehci-pci
[    2.377878] random: fast init done
[    2.402926] usb 2-1.2: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08
[    2.402931] usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.402934] usb 2-1.2: Product: Dell KB216 Wired Keyboard
[    2.410248] hidraw: raw HID events driver (C) Jiri Kosina
[    2.420033] usbcore: registered new interface driver usbhid
[    2.420034] usbhid: USB HID core driver
[    2.422114] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:413C:2113.0001/input/input5
[    2.476014] usb 2-1.3: new high-speed USB device number 5 using ehci-pci
[    2.476201] hid-generic 0003:413C:2113.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:00:1d.0-1.2/input0
[    2.476420] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:413C:2113.0002/input/input6
[    2.482717] usb 1-1.2.1: new low-speed USB device number 4 using ehci-pci
[    2.532836] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:413C:2113.0002/input/input7
[    2.533011] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:00:1d.0-1.2/input1
[    2.574720] usb 2-1.3: New USB device found, idVendor=12d1, idProduct=14dc, bcdDevice= 1.02
[    2.574734] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.574735] usb 2-1.3: Product: HUAWEI_MOBILE
[    2.574737] usb 2-1.3: Manufacturer: HUAWEI_MOBILE
[    2.582906] usb 1-1.2.1: New USB device found, idVendor=04f2, idProduct=1126, bcdDevice= 2.00
[    2.582909] usb 1-1.2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.582912] usb 1-1.2.1: Product: USB Optical Mouse
[    2.585677] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:04F2:1126.0003/input/input8
[    2.585754] hid-generic 0003:04F2:1126.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1.2.1/input0
[    2.641897] usb-storage 2-1.3:1.2: USB Mass Storage device detected
[    2.642257] scsi host6: usb-storage 2-1.3:1.2
[    3.144113] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.660898] scsi 6:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
[    3.838224] scsi 5:0:0:0: Direct-Access     ADATA    USB Flash Drive  1100 PQ: 0 ANSI: 6
[    3.839995] sd 5:0:0:0: [sdb] 30310400 512-byte logical blocks: (15.5 GB/14.5 GiB)
[    3.840074] sd 6:0:0:0: Power-on or device reset occurred
[    3.840957] sd 5:0:0:0: [sdb] Write Protect is off
[    3.840961] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    3.841828] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.843068] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    3.858611]  sdb: sdb1
[    3.863025] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[    4.518348] random: crng init done

[MójPan]

Kod: [Zaznacz]

4.932375] systemd[1]: systemd 243.78-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    4.946287] systemd[1]: Detected architecture x86-64.
[    4.994802] systemd[1]: Set hostname to <anarchy>.
[    6.947864] systemd[1]: Created slice system-getty.slice.
[    6.948515] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    6.949058] systemd[1]: Created slice User and Session Slice.
[    6.949342] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.949607] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.950136] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.950354] systemd[1]: Reached target Local Encrypted Volumes.
[    7.163513] EXT4-fs (sda2): re-mounted. Opts: (null)
[    7.480035] audit: type=1130 audit(1572328388.791:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.494747] audit: type=1130 audit(1572328388.804:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.686375] audit: type=1130 audit(1572328388.997:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.728968] systemd-journald[291]: Received client request to flush runtime journal.
[    8.341054] audit: type=1130 audit(1572328389.651:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.412418] audit: type=1130 audit(1572328389.721:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.629792] audit: type=1130 audit(1572328389.941:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.174439] audit: type=1130 audit(1572328390.484:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.447332] ACPI: AC Adapter [ADP1] (on-line)
[    9.502553] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    9.502670] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    9.628750] EDAC ie31200: No ECC support
[    9.628775] battery: ACPI: Battery Slot [BAT0] (battery absent)
[    9.631537] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    9.631980] input: PC Speaker as /devices/platform/pcspkr/input/input9
[    9.736284] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20190703/utaddress-204)
[    9.736290] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.736298] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20190703/utaddress-204)
[    9.736303] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\_SB.PCI0.LPCB.LPIO) (20190703/utaddress-204)
[    9.736306] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.736307] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20190703/utaddress-204)
[    9.736310] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20190703/utaddress-204)
[    9.736314] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\_SB.PCI0.LPCB.LPIO) (20190703/utaddress-204)
[    9.736317] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.736318] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20190703/utaddress-204)
[    9.736321] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20190703/utaddress-204)
[    9.736324] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20190703/utaddress-204)
[    9.736328] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\_SB.PCI0.LPCB.LPIO) (20190703/utaddress-204)
[    9.736331] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.736332] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.087708] Linux agpgart interface v0.103
[   10.091442] tpm_tis 00:07: 1.2 TPM (device-id 0x0, rev-id 78)
[   10.254709] iTCO_vendor_support: vendor-support=0
[   10.271622] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   10.271697] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[   10.271894] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.335545] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[   10.335547] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   10.335549] RAPL PMU: hw unit of domain package 2^-14 Joules
[   10.335550] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   10.335551] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   10.402153] intel-spi intel-spi: mx25l6405d (8192 Kbytes)
[   10.500100] Creating 1 MTD partitions on "intel-spi":
[   10.500104] 0x000000000000-0x000000800000 : "BIOS"
[   10.574786] Non-volatile memory driver v1.3
[   10.629956] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   10.629959] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.629961] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
[   10.629962] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   10.629963] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   10.629964] snd_hda_codec_realtek hdaudioC1D0:      Dock Mic=0x19
[   10.629966] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x1a
[   10.629967] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[   10.638364] cryptd: max_cpu_qlen set to 1000
[   10.672682] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[   10.672764] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[   10.672842] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[   10.672917] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[   10.672987] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[   10.688365] AVX2 version of gcm_enc/dec engaged.
[   10.688366] AES CTR mode by8 optimization enabled
[   10.693697] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[   10.693698] thinkpad_acpi: http://ibm-acpi.sf.net/
[   10.693699] thinkpad_acpi: ThinkPad BIOS J4ET91WW(1.91), EC unknown
[   10.693700] thinkpad_acpi: Lenovo ThinkPad L540, model 20AVA04UPB
[   10.700454] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[   10.700455] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[   10.704485] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[   10.704559] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[   10.706048] battery: new extension: ThinkPad Battery Extension
[   10.706090] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input16

[MójPan]

Kod: [Zaznacz]

[   10.875588] checking generic (e0000000 130000) vs hw (e0000000 10000000)
[   10.875589] fb0: switching to inteldrmfb from EFI VGA
[   10.875884] Console: switching to colour dummy device 80x25
[   10.875912] i915 0000:00:02.0: vgaarb: deactivate vga console
[   10.875978] [drm] ACPI BIOS requests an excessive sleep of 5000 ms, using 1500 ms instead
[   10.876629] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   10.876629] [drm] Driver supports precise vblank timestamp query.
[   10.877013] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   10.904780] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
[   10.907751] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   10.908075] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17
[   10.908250] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   10.924985] fbcon: i915drmfb (fb0) is primary device
[   11.405700] mousedev: PS/2 mouse device common for all mice
[   12.028068] cdc_ether 2-1.3:1.0 eth0: register 'cdc_ether' at usb-0000:00:1d.0-1.3, CDC Ethernet Device, 0c:5b:8f:27:9a:64
[   12.028130] usbcore: registered new interface driver cdc_ether
[   12.064314] cdc_ether 2-1.3:1.0 enp0s29u1u3: renamed from eth0
[   12.092582] Console: switching to colour frame buffer device 240x67
[   12.116788] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[   12.253131] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[   12.253241] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[   12.253382] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[   12.253493] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
[   12.253597] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
[   12.331439] intel_rapl_common: Found RAPL domain package
[   12.331441] intel_rapl_common: Found RAPL domain core
[   12.331442] intel_rapl_common: Found RAPL domain uncore
[   12.331443] intel_rapl_common: Found RAPL domain dram
[   12.392658] Adding 8388604k swap on /dev/sda3.  Priority:-2 extents:1 across:8388604k FS
[   12.467532] audit: type=1130 audit(1572328393.777:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:intel_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.468676] audit: type=1130 audit(1572328393.777:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.670065] audit: type=1130 audit(1572328393.981:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-sda1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.346285] audit: type=1130 audit(1572328394.657:12): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.469552] audit: type=1127 audit(1572328394.781:13): pid=438 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[   13.476288] audit: type=1130 audit(1572328394.787:14): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.758119] audit: type=1130 audit(1572328395.067:15): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-catalog-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.271171] audit: type=1130 audit(1572328395.581:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.300428] audit: type=1130 audit(1572328395.611:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-done comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.334003] audit: type=1130 audit(1572328395.644:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.891469] 8021q: 802.1Q VLAN Support v1.8
[   15.059657] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   15.062743] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   15.075484] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   15.075487] cfg80211: failed to load regulatory.db
[   16.010741] audit: type=1130 audit(1572328397.321:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=cpupower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.013738] audit: type=1130 audit(1572328397.324:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dhcpcd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.733466] kauditd_printk_skb: 5 callbacks suppressed
[   17.733470] audit: type=1130 audit(1572328399.044:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   20.476689] audit: type=1130 audit(1572328401.787:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@974 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   20.582590] audit: type=1130 audit(1572328401.891:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@974 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[   28.309340] audit: type=1131 audit(1572328409.621:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   37.931802] audit: type=1006 audit(1572328419.241:30): pid=551 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
[   37.937568] audit: type=1131 audit(1572328419.247:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@974 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   37.994013] audit: type=1130 audit(1572328419.304:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   37.998465] audit: type=1006 audit(1572328419.307:33): pid=557 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   38.313517] audit: type=1130 audit(1572328419.624:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   38.547278] audit: type=1112 audit(1572328419.857:35): pid=551 uid=0 auid=1000 ses=1 msg='op=login id=1000 exe="/usr/bin/lightdm" hostname=anarchy addr=? terminal=/dev/tty7 res=success'
[   41.287979] fuse: init (API version 7.31)
[   42.450086] audit: type=1130 audit(1572328423.761:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   44.240561] audit: type=1130 audit(1572328425.551:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   46.680953] audit: type=1131 audit(1572328427.991:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   50.974165] audit: type=1130 audit(1572328432.284:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  278.919307] audit: type=1130 audit(1572328660.227:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=packagekit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  395.785543] audit: type=1130 audit(1572328777.094:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  396.452323] audit: type=1130 audit(1572328777.761:42): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  426.504534] audit: type=1131 audit(1572328807.814:43): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  584.053645] audit: type=1131 audit(1572328965.364:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=packagekit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  607.854207] audit: type=1130 audit(1572328989.164:45): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  637.897632] audit: type=1131 audit(1572329019.207:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  769.167868] audit: type=1130 audit(1572329150.477:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  799.211140] audit: type=1131 audit(1572329180.521:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  841.585576] audit: type=1130 audit(1572329222.894:49): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  871.630783] audit: type=1131 audit(1572329252.941:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  946.549184] audit: type=1130 audit(1572329327.861:51): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  946.549191] audit: type=1131 audit(1572329327.861:52): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1229.913832] audit: type=1130 audit(1572329611.224:53): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1259.948572] audit: type=1131 audit(1572329641.257:54): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1428.444779] audit: type=1130 audit(1572329809.754:55): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=packagekit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1730.632053] audit: type=1130 audit(1572330111.941:56): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1760.684750] audit: type=1131 audit(1572330141.994:57): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1829.026941] audit: type=1131 audit(1572330210.337:58): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=packagekit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1954.892423] audit: type=1130 audit(1572330336.204:59): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1984.945009] audit: type=1131 audit(1572330366.254:60): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3535.980808] audit: type=1130 audit(1572331917.290:61): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=colord comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3541.064477] traps: xfce4-color-set[2030] general protection fault ip:7f48ed30317d sp:7ffff65a9098 error:0 in libgobject-2.0.so.0.6200.2[7f48ed2fd000+32000]
[ 3541.064597] audit: type=1701 audit(1572331922.374:62): auid=1000 uid=1000 gid=1000 ses=1 pid=2030 comm="xfce4-color-set" exe="/usr/bin/xfce4-color-settings" sig=11 res=1
[ 3541.223333] audit: type=1130 audit(1572331922.534:63): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@0-2038-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3541.775407] audit: type=1131 audit(1572331923.087:64): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@0-2038-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3601.581591] audit: type=1130 audit(1572331982.890:65): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3631.631078] audit: type=1131 audit(1572332012.940:66): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3852.388437] audit: type=1130 audit(1572332233.697:67): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=packagekit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4178.036065] audit: type=1131 audit(1572332559.347:68): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=packagekit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4311.158517] audit: type=1130 audit(1572332692.467:69): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4341.208430] audit: type=1131 audit(1572332722.517:70): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[kot@anarchy:~]$                                                                                                                                                   (10-29 08:11)

[pavbaranov]

Mógłby ktoś przeglądnąć, ale pod jakim kątem?
PS: W Archu jest wygodne narzędzie pn. pastebinit, które wrzucić może każdy plik tekstowy na jakiś serwis typu pastebin. Istnieje też qjournalctl, który służy wygodnemu przeglądaniu dziennika i eksportowaniu z niego wyników w postaci tekstowej. To jest oparte o Qt5, ale być może również istnieje coś na gtk.

[1709]

1. Alternatywa to np. https://pastebin.com/
tam tez jest ograniczenie, ale nie wiem do ilu linii.

2. Odnośnie logu, tak na szybko

Kod: [Zaznacz]

$ grep -e 'error\|warning\|failed' plik

[    0.841464] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[   15.075484] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   15.075487] cfg80211: failed to load regulatory.db
[   20.582590] audit: type=1130 audit(1572328401.891:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@974 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 3541.064477] traps: xfce4-color-set[2030] general protection fault ip:7f48ed30317d sp:7ffff65a9098 error:0 in libgobject-2.0.so.0.6200.2[7f48ed2fd000+32000]

" _OSC failed (AE_ERROR); disabling ASPM "
- Wyglada na to ze nie trzeba sie tym przejmowac
https://bbs.archlinux.org/viewtopic.php?id=196181

" Direct firmware load for regulatory.db failed  "
- Wspomnialem w osobnym temacie https://forum.linux.pl/index.php/topic,25682.0.html

" audit: ... exe="/usr/lib/systemd/systemd" ...  res=failed'
- Troche pomocny jest poradnik  https://linux-audit.com/configuring-and-auditing-linux-systems-with-audit-daemon/
w którym pogrubiono tekst na co zwracać uwagę, ale tego jeszcze nie ogarniam.
Mogę tylko zgadywać ze systemd nie pozwolił na coś i program audit o tym poinformował.

" traps: xfce4-color-set "
- Ciężko cokolwiek mi znaleźć, ale wygląda jakby ta aplikacja się wysypała,
ponieważ znalazłem podobny błąd z inna aplikacja xfce  https://bugzilla.redhat.com/show_bug.cgi?id=736964

[MójPan]

No to czeka mnie weekend zaduszków hehhe, tortury na maxa, obym po nocach przez Archa pościeli nie moczył

[pavbaranov]

Nie. Stop. Siadaj. Źle do tego podchodzisz. Nie chodzi o to, by wyświetlić dziennik, siedzieć nad każdym i zastanawiać się o co chodzi i... jak to było w pewnym starym wicu... "i co by tu jeszcze spieprzyć panowie". Został te wszystkie error, warn, fail, bo kota dostaniesz, a efektu lepszego nie będzie, co najwyżej gorszy. Wpierw uruchomić, działać. Jeśli coś nie działa, to wówczas zakładaj wątek. Jak na razie prawdopodobnie nie odróżnisz choćby takiego error związanego z ACPI, który niczego nie robi, od istotnego błędu. Zresztą proste dodanie do bootloadera maski na watchdoga powoduje, że tych błędów jest sporo mniej.

[MójPan]

Acpi = kumam
watchdog = gdzie tam słyszałem "coś"
zatem i tak nie ominie mnie czytanie