Nowe posty

Autor Wątek: X'y sie nie laduja...  (Przeczytany 3922 razy)

Offline

  • Users
  • Nowy na forum
  • *
  • Wiadomości: 20
    • Zobacz profil
X'y sie nie laduja...
« dnia: 2005-12-08, 15:17:19 »
Witam.
Używam dystrybucji Gentoo Linux 2005.0 z jądrem 2.6.11-gentoo-r5. Mój sprzęt:

Intel Pentium IV 1,8 GHz
GeForce MX 420
512 MB RAM

Ostatnio zainstalowałem sterowniki nVidia w ten sposób:
# emerge nvidia-glx
# opengl-update nvidia
następnie dodałem moduł nvidia do /etc/modules.autoload.d/linux-2.6
na koniec wprowadziłem odpowiednie zmiany do xorg.conf:
Load \\"glx\\"
usunąłem linijkę Load \\"dri\\"
potem zmieniłem Driver \\"nv\\" na Driver \\"nvidia\\"

potem zrestartowałem komputer. Moduł nvidia załadował się bez problemu. Po czym zalogowałem się uruchomiłem kdm:
# kdm
Ekran zrobił się czarny a po kilku sekundach przełączył się w \\"standby\\". Czekałem z nadzieją, że coś się zmieni ale nic się nie poprawiło. Robiłem to samo z innymi wersjami sterowników, przekompilowywałem X.org i jądro, efekt zawsze jest ten sam. Szukałem rozwiązania na innych forach (zarówno polskich jak i zagranicznych) ale wygląda na to, że problem jest trudny do rozwiązania. Dodam jeszcze, że po poprzedniej instalacji Gentoo 2005.0 nie miałem tego problemu.

Oto Xorg.0.log po nieudanym uruchomieniu ze sterownikami nvidia:


X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.11-gentoo-r5 i686 [ELF]
Current Operating System: Linux localhost 2.6.11-gentoo-r5 #1 Wed Dec 7 09:32:17 CET 2005 i686
Build Date: 06 December 2005
   Before reporting problems, check http://wiki.X.Org
   to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: \\"/var/log/Xorg.0.log\\", Time: Thu Dec  8 13:51:35 2005
(==) Using config file: \\"/root/xorg.conf\\"
(==) ServerLayout \\"X.org Configured\\"
(**) |-->Screen \\"Screen0\\" (0)
(**) |   |-->Monitor \\"Monitor0\\"
(**) |   |-->Device \\"Card0\\"
(**) |-->Input Device \\"Mouse0\\"
(**) |-->Input Device \\"Keyboard0\\"
(WW) The directory \\"/usr/share/fonts/CID/\\" does not exist.
   Entry deleted from font path.
(**) FontPath set to \\"/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/\\"
(**) RgbPath set to \\"/usr/lib/X11/rgb\\"
(**) ModulePath set to \\"/usr/lib/modules\\"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.2
   X.Org Video Driver: 0.7
   X.Org XInput driver : 0.4
   X.Org Server Extension : 0.2
   X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: \\"bitmap\\"
(II) Loading /usr/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor=\\"X.Org Foundation\\"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: \\"pcidata\\"
(II) Loading /usr/lib/modules/libpcidata.a
(II) Module pcidata: vendor=\\"X.Org Foundation\\"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Video Driver, version 0.7
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3128 card 1297,a140 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b091 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10ec,8029 card 10ec,8029 rev 00 class 02,00,00 hdr 00
(II) PCI: 00:11:0: chip 1106,3074 card 1297,a140 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00
(II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00
(II) PCI: 00:11:4: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1297,a140 rev 30 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0172 card 0000,0000 rev a3 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
   
  • -1   0   0x00000000 - 0x0000ffff (0x10000) IX

(II) Bus 0 non-prefetchable memory range:
   
  • -1   0   0x00000000 - 0xffffffff (0x0) MX

(II) Bus 0 prefetchable memory range:
   
  • -1   0   0x00000000 - 0xffffffff (0x0) MX

(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
   
  • -1   0   0xec000000 - 0xedffffff (0x2000000) MX

(II) Bus 1 prefetchable memory range:
   
  • -1   0   0xe4000000 - 0xebffffff (0x8000000) MX

(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV17 [GeForce4 MX 420] rev 163, Mem @ 0xec000000/24, 0xe4000000/26, 0xe8000000/19
(II) Addressable bus resource ranges are
   
  • -1   0   0x00000000 - 0xffffffff (0x0) MX
  • [1] -1   0   0x00000000 - 0x0000ffff (0x10000) IX

(II) OS-reported resource ranges:
   
  • -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
  • [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
   
  • -1   0   0xe0000000 - 0xdfffffff (0x0) MXO
  • [1] -1   0   0xe8000000 - 0xe807ffff (0x80000) MX
(B)
   [2] -1   0   0xe4000000 - 0xe7ffffff (0x4000000) MX(B)
   [3] -1   0   0xec000000 - 0xecffffff (0x1000000) MX(B)
   [4] -1   0   0x0000e400 - 0x0000e4ff (0x100) IX
   [5] -1   0   0x0000e000 - 0x0000e01f (0x20) IX
   [6] -1   0   0x0000dc00 - 0x0000dc1f (0x20) IX
   [7] -1   0   0x0000d800 - 0x0000d81f (0x20) IX
   [8] -1   0   0x0000d400 - 0x0000d40f (0x10) IX
   [9] -1   0   0x0000d000 - 0x0000d01f (0x20) IX
(II) Active PCI resource ranges after removing overlaps:
   
  • -1   0   0xe0000000 - 0xdfffffff (0x0) MXO
  • [1] -1   0   0xe8000000 - 0xe807ffff (0x80000) MX
(B)
   [2] -1   0   0xe4000000 - 0xe7ffffff (0x4000000) MX(B)
   [3] -1   0   0xec000000 - 0xecffffff (0x1000000) MX(B)
   [4] -1   0   0x0000e400 - 0x0000e4ff (0x100) IX
   [5] -1   0   0x0000e000 - 0x0000e01f (0x20) IX
   [6] -1   0   0x0000dc00 - 0x0000dc1f (0x20) IX
   [7] -1   0   0x0000d800 - 0x0000d81f (0x20) IX
   [8] -1   0   0x0000d400 - 0x0000d40f (0x10) IX
   [9] -1   0   0x0000d000 - 0x0000d01f (0x20) IX
(II) OS-reported resource ranges after removing overlaps with PCI:
   
  • -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
  • [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX
(II) All system resource ranges:
   
  • -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
  • [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0   0xe0000000 - 0xdfffffff (0x0) MXO
   [6] -1   0   0xe8000000 - 0xe807ffff (0x80000) MX(B)
   [7] -1   0   0xe4000000 - 0xe7ffffff (0x4000000) MX(B)
   [8] -1   0   0xec000000 - 0xecffffff (0x1000000) MX(B)
   [9] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [10] -1   0   0x00000000 - 0x000000ff (0x100) IX
   [11] -1   0   0x0000e400 - 0x0000e4ff (0x100) IX
   [12] -1   0   0x0000e000 - 0x0000e01f (0x20) IX
   [13] -1   0   0x0000dc00 - 0x0000dc1f (0x20) IX
   [14] -1   0   0x0000d800 - 0x0000d81f (0x20) IX
   [15] -1   0   0x0000d400 - 0x0000d40f (0x10) IX
   [16] -1   0   0x0000d000 - 0x0000d01f (0x20) IX
(II) LoadModule: \\"extmod\\"
(II) Loading /usr/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor=\\"X.Org Foundation\\"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: \\"dbe\\"
(II) Loading /usr/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor=\\"X.Org Foundation\\"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: \\"record\\"
(II) Loading /usr/lib/modules/extensions/librecord.a
(II) Module record: vendor=\\"X.Org Foundation\\"
   compiled for 6.8.2, module version = 1.13.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: \\"xtrap\\"
(II) Loading /usr/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor=\\"X.Org Foundation\\"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: \\"glx\\"
(II) Loading /usr/lib/modules/extensions/libglx.so
(II) Module glx: vendor=\\"NVIDIA Corporation\\"
   compiled for 4.0.2, module version = 1.0.6629
   Module class: XFree86 Server Extension
   ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: \\"type1\\"
(II) Loading /usr/lib/modules/fonts/libtype1.a
(II) Module type1: vendor=\\"X.Org Foundation\\"
   compiled for 6.8.2, module version = 1.0.2
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: \\"freetype\\"
(II) Loading /usr/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor=\\"X.Org Foundation & the After X-TT Project\\"
   compiled for 6.8.2, module version = 2.1.0
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: \\"nvidia\\"
(II) Loading /usr/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor=\\"NVIDIA Corporation\\"
   compiled for 4.0.2, module version = 1.0.6629
   Module class: XFree86 Video Driver
(II) LoadModule: \\"mouse\\"
(II) Loading /usr/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor=\\"X.Org Foundation\\"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: \\"kbd\\"
(II) Loading /usr/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor=\\"X.Org Foundation\\"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 0.4
(II) NVIDIA X Driver  1.0-6629  Wed Nov  3 13:14:07 PST 2004
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) resource ranges after xf86ClaimFixedResources() call:
   
  • -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
  • [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0   0xe0000000 - 0xdfffffff (0x0) MXO
   [6] -1   0   0xe8000000 - 0xe807ffff (0x80000) MX(B)
   [7] -1   0   0xe4000000 - 0xe7ffffff (0x4000000) MX(B)
   [8] -1   0   0xec000000 - 0xecffffff (0x1000000) MX(B)
   [9] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [10] -1   0   0x00000000 - 0x000000ff (0x100) IX
   [11] -1   0   0x0000e400 - 0x0000e4ff (0x100) IX
   [12] -1   0   0x0000e000 - 0x0000e01f (0x20) IX
   [13] -1   0   0x0000dc00 - 0x0000dc1f (0x20) IX
   [14] -1   0   0x0000d800 - 0x0000d81f (0x20) IX
   [15] -1   0   0x0000d400 - 0x0000d40f (0x10) IX
   [16] -1   0   0x0000d000 - 0x0000d01f (0x20) IX
(II) resource ranges after probing:
   
  • -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
  • [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0   0xe0000000 - 0xdfffffff (0x0) MXO
   [6] -1   0   0xe8000000 - 0xe807ffff (0x80000) MX(B)
   [7] -1   0   0xe4000000 - 0xe7ffffff (0x4000000) MX(B)
   [8] -1   0   0xec000000 - 0xecffffff (0x1000000) MX(B)
   [9] 0   0   0x000a0000 - 0x000affff (0x10000) MS
   [10] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS
   [11] 0   0   0x000b8000 - 0x000bffff (0x8000) MS
   [12] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [13] -1   0   0x00000000 - 0x000000ff (0x100) IX
   [14] -1   0   0x0000e400 - 0x0000e4ff (0x100) IX
   [15] -1   0   0x0000e000 - 0x0000e01f (0x20) IX
   [16] -1   0   0x0000dc00 - 0x0000dc1f (0x20) IX
   [17] -1   0   0x0000d800 - 0x0000d81f (0x20) IX
   [18] -1   0   0x0000d400 - 0x0000d40f (0x10) IX
   [19] -1   0   0x0000d000 - 0x0000d01f (0x20) IX
   [20] 0   0   0x000003b0 - 0x000003bb (0xc) IS
   [21] 0   0   0x000003c0 - 0x000003df (0x20) IS
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
(==) NVIDIA(0): RGB weight 565
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option \\"NvAGP\\" \\"2\\"
(**) NVIDIA(0): Option \\"RenderAccel\\" \\"true\\"
(**) NVIDIA(0): Enabling experimental RENDER acceleration
(**) NVIDIA(0): Use of AGPGART requested
(--) NVIDIA(0): Linear framebuffer at 0xE4000000
(--) NVIDIA(0): MMIO registers at 0xEC000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce4 MX 420
(--) NVIDIA(0): VideoBIOS: 04.17.00.45.00
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): VideoRAM: 65536 kBytes
(II) NVIDIA(0): Connected display device(s): CRT-0, TV-0
(WW) NVIDIA(0): Multiple displays connected, but only one display allowed;
(WW) NVIDIA(0):      using first display
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at  8 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 32 bpp: 350 MHz
(II) Loading sub module \\"ddc\\"
(II) LoadModule: \\"ddc\\"
(II) Loading /usr/lib/modules/libddc.a
(II) Module ddc: vendor=\\"X.Org Foundation\\"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module \\"int10\\"
(II) LoadModule: \\"int10\\"
(II) Loading /usr/lib/modules/linux/libint10.a
(II) Module int10: vendor=\\"X.Org Foundation\\"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Video Driver, version 0.7
(II) NVIDIA(0): Primary V_BIOS segment is: 0xc000
(II) NVIDIA(0): Monitor0: Using default hsync range of 30.00-96.00 kHz
(II) NVIDIA(0): Monitor0: Using default vrefresh range of 50.00-160.00 Hz
(II) NVIDIA(0): Clock range:  12.00 to 350.00 MHz
(WW) (1600x1200,Monitor0) mode clock 202.5MHz exceeds DDC maximum 200MHz
(II) NVIDIA(0): Not using default mode \\"1600x1200\\" (hsync out of range)
(II) NVIDIA(0): Not using default mode \\"800x600\\" (hsync out of range)
(WW) (1792x1344,Monitor0) mode clock 204.8MHz exceeds DDC maximum 200MHz
(II) NVIDIA(0): Not using default mode \\"1792x1344\\" (hsync out of range)
(II) NVIDIA(0): Not using default mode \\"896x672\\" (hsync out of range)
(WW) (1856x1392,Monitor0) mode clock 218.3MHz exceeds DDC maximum 200MHz
(II) NVIDIA(0): Not using default mode \\"1856x1392\\" (hsync out of range)
(II) NVIDIA(0): Not using default mode \\"928x696\\" (hsync out of range)
(WW) (1920x1440,Monitor0) mode clock 234MHz exceeds DDC maximum 200MHz
(II) NVIDIA(0): Not using default mode \\"1920x1440\\" (hsync out of range)
(II) NVIDIA(0): Not using default mode \\"960x720\\" (hsync out of range)
(II) NVIDIA(0): Not using default mode \\"1920x1440\\" (hsync out of range)
(II) NVIDIA(0): Not using default mode \\"960x720\\" (hsync out of range)
(WW) (2048x1536,Monitor0) mode clock 266.95MHz exceeds DDC maximum 200MHz
(II) NVIDIA(0): Not using default mode \\"2048x1536\\" (hsync out of range)
(II) NVIDIA(0): Not using default mode \\"1024x768\\" (hsync out of range)
(II) NVIDIA(0): Not using default mode \\"2048x1536\\" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode \\"1024x768\\" (hsync out of range)
(II) NVIDIA(0): Not using default mode \\"2048x1536\\" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode \\"1920x1440\\" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode \\"1856x1392\\" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode \\"1792x1344\\" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode \\"1600x1200\\" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode \\"1600x1200\\" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode \\"1600x1200\\" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode \\"1600x1200\\" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode \\"1400x1050\\" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode \\"1400x1050\\" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode \\"1280x1024\\" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode \\"1280x1024\\" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode \\"1280x1024\\" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode \\"1280x960\\" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode \\"1280x960\\" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode \\"1152x864\\" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode \\"1152x768\\" (width too large for virtual size)
(WW) NVIDIA(0): Not using mode \\"1024x768\\" (height 1536 is larger than
(WW) NVIDIA(0):      EDID-specified maximum 1200)
(WW) NVIDIA(0): Not using mode \\"960x720\\" (height 1440 is larger than
(WW) NVIDIA(0):      EDID-specified maximum 1200)
(WW) NVIDIA(0): Not using mode \\"928x696\\" (height 1392 is larger than
(WW) NVIDIA(0):      EDID-specified maximum 1200)
(WW) NVIDIA(0): Not using mode \\"896x672\\" (height 1344 is larger than
(WW) NVIDIA(0):      EDID-specified maximum 1200)
(WW) NVIDIA(0): Not using mode \\"576x384\\":
(WW) NVIDIA(0):   horizontal sync start (589) not a multiple of 8
(WW) NVIDIA(0): Not using mode \\"360x200\\":
(WW) NVIDIA(0):   horizontal sync start (378) not a multiple of 8
(**) NVIDIA(0): Validated modes for display device CRT-0:
(**) NVIDIA(0):      Default mode \\"1024x768\\": 94.5 MHz, 68.7 kHz, 85.0 Hz
(**) NVIDIA(0):      Default mode \\"800x600\\": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) NVIDIA(0):      Default mode \\"640x480\\": 74.2 MHz, 85.9 kHz, 85.1 Hz (D)
(**) NVIDIA(0):      Default mode \\"1024x768\\": 78.8 MHz, 60.1 kHz, 75.1 Hz
(**) NVIDIA(0):      Default mode \\"1024x768\\": 75.0 MHz, 56.5 kHz, 70.1 Hz
(**) NVIDIA(0):      Default mode \\"1024x768\\": 65.0 MHz, 48.4 kHz, 60.0 Hz
(**) NVIDIA(0):      Default mode \\"1024x768\\": 44.9 MHz, 35.5 kHz, 87.0 Hz (I)
(**) NVIDIA(0):      Default mode \\"832x624\\": 57.3 MHz, 49.7 kHz, 74.6 Hz
(**) NVIDIA(0):      Default mode \\"800x600\\": 49.5 MHz, 46.9 kHz, 75.0 Hz
(**) NVIDIA(0):      Default mode \\"800x600\\": 101.2 MHz, 93.8 kHz, 75.0 Hz (D)
(**) NVIDIA(0):      Default mode \\"800x600\\": 50.0 MHz, 48.1 kHz, 72.2 Hz
(**) NVIDIA(0):      Default mode \\"800x600\\": 94.5 MHz, 87.5 kHz, 70.0 Hz (D)
(**) NVIDIA(0):      Default mode \\"800x600\\": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
(**) NVIDIA(0):      Default mode \\"800x600\\": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NVIDIA(0):      Default mode \\"800x600\\": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0):      Default mode \\"800x600\\": 36.0 MHz, 35.2 kHz, 56.2 Hz
(**) NVIDIA(0):      Default mode \\"700x525\\": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
(**) NVIDIA(0):      Default mode \\"700x525\\": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(**) NVIDIA(0):      Default mode \\"640x512\\": 78.8 MHz, 91.1 kHz, 85.0 Hz (D)
(**) NVIDIA(0):      Default mode \\"640x512\\": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(**) NVIDIA(0):      Default mode \\"640x512\\": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0):      Default mode \\"640x480\\": 36.0 MHz, 43.3 kHz, 85.0 Hz
(**) NVIDIA(0):      Default mode \\"640x480\\": 31.5 MHz, 37.5 kHz, 75.0 Hz
(**) NVIDIA(0):      Default mode \\"640x480\\": 31.5 MHz, 37.9 kHz, 72.8 Hz
(**) NVIDIA(0):      Default mode \\"640x480\\": 25.2 MHz, 31.5 kHz, 60.0 Hz
(**) NVIDIA(0):      Default mode \\"640x480\\": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0):      Default mode \\"720x400\\": 35.5 MHz, 37.9 kHz, 85.0 Hz
(**) NVIDIA(0):      Default mode \\"640x400\\": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0):      Default mode \\"576x432\\": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0):      Default mode \\"640x350\\": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0):      Default mode \\"512x384\\": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(**) NVIDIA(0):      Default mode \\"512x384\\": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(**) NVIDIA(0):      Default mode \\"512x384\\": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(**) NVIDIA(0):      Default mode \\"512x384\\": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(**) NVIDIA(0):      Default mode \\"512x384\\": 22.4 MHz, 35.5 kHz, 86.9 Hz (D)
(**) NVIDIA(0):      Default mode \\"416x312\\": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(**) NVIDIA(0):      Default mode \\"400x300\\": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(**) NVIDIA(0):      Default mode \\"400x300\\": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(**) NVIDIA(0):      Default mode \\"400x300\\": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(**) NVIDIA(0):      Default mode \\"400x300\\": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(**) NVIDIA(0):      Default mode \\"400x300\\": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(**) NVIDIA(0):      Default mode \\"320x240\\": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(**) NVIDIA(0):      Default mode \\"320x240\\": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0):      Default mode \\"320x240\\": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(**) NVIDIA(0):      Default mode \\"320x240\\": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(**) NVIDIA(0):      Default mode \\"320x200\\": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(**) NVIDIA(0):      Default mode \\"320x175\\": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(0): Display dimensions: (330, 250) mm
(--) NVIDIA(0): DPI set to (78, 78)
(II) Loading sub module \\"fb\\"
(II) LoadModule: \\"fb\\"
(II) Loading /usr/lib/modules/libfb.a
(II) Module fb: vendor=\\"X.Org Foundation\\"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module \\"ramdac\\"
(II) LoadModule: \\"ramdac\\"
(II) Loading /usr/lib/modules/libramdac.a
(II) Module ramdac: vendor=\\"X.Org Foundation\\"
   compiled for 6.8.2, module version = 0.1.0
   ABI class: X.Org Video Driver, version 0.7
(II) do I need RAC?  No, I don\\'t.
(II) resource ranges after preInit:
   
  • 0   0   0xe8000000 - 0xe807ffff (0x80000) MX
  • [1] 0   0   0xe4000000 - 0xe7ffffff (0x4000000) MX

   [2] 0   0   0xec000000 - 0xecffffff (0x1000000) MX
   [3] -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
   [4] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
   [5] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [6] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [7] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [8] -1   0   0xe0000000 - 0xdfffffff (0x0) MXO
   [9] -1   0   0xe8000000 - 0xe807ffff (0x80000) MX(B)
   [10] -1   0   0xe4000000 - 0xe7ffffff (0x4000000) MX(B)
   [11] -1   0   0xec000000 - 0xecffffff (0x1000000) MX(B)
   [12] 0   0   0x000a0000 - 0x000affff (0x10000) MS(OprD)
   [13] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS(OprD)
   [14] 0   0   0x000b8000 - 0x000bffff (0x8000) MS(OprD)
   [15] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [16] -1   0   0x00000000 - 0x000000ff (0x100) IX
   [17] -1   0   0x0000e400 - 0x0000e4ff (0x100) IX
   [18] -1   0   0x0000e000 - 0x0000e01f (0x20) IX
   [19] -1   0   0x0000dc00 - 0x0000dc1f (0x20) IX
   [20] -1   0   0x0000d800 - 0x0000d81f (0x20) IX
   [21] -1   0   0x0000d400 - 0x0000d40f (0x10) IX
   [22] -1   0   0x0000d000 - 0x0000d01f (0x20) IX
   [23] 0   0   0x000003b0 - 0x000003bb (0xc) IS(OprU)
   [24] 0   0   0x000003c0 - 0x000003df (0x20) IS(OprU)
(II) NVIDIA(0): Setting mode \\"1024x768\\"
(WW) NVIDIA(0): WAIT (2, 1, 0x800004x, 0x08x, 0x08x)
(WW) NVIDIA(0): WAIT (1, 1, 0x800004x, 0x08x, 0x08x)
(II) Loading extension NV-GLX

-------------------------------------------------------------------------------

A tutaj xorg.conf:

Section \\"ServerLayout\\"
   Identifier     \\"X.org Configured\\"
   Screen      0  \\"Screen0\\" 0 0
   InputDevice    \\"Mouse0\\" \\"CorePointer\\"
   InputDevice    \\"Keyboard0\\" \\"CoreKeyboard\\"
EndSection

Section \\"Files\\"
   RgbPath      \\"/usr/lib/X11/rgb\\"
   ModulePath   \\"/usr/lib/modules\\"
   FontPath     \\"/usr/share/fonts/misc/\\"
   FontPath     \\"/usr/share/fonts/TTF/\\"
   FontPath     \\"/usr/share/fonts/Type1/\\"
   FontPath     \\"/usr/share/fonts/CID/\\"
   FontPath     \\"/usr/share/fonts/75dpi/\\"
   FontPath     \\"/usr/share/fonts/100dpi/\\"
EndSection

Section \\"Module\\"
   Load  \\"extmod\\"
#   Load  \\"dri\\"
   Load  \\"dbe\\"
   Load  \\"record\\"
   Load  \\"xtrap\\"
   Load  \\"glx\\"
   Load  \\"type1\\"
   Load  \\"freetype\\"
EndSection

Section \\"InputDevice\\"
   Identifier  \\"Keyboard0\\"
   Driver      \\"kbd\\"
EndSection

Section \\"InputDevice\\"
   Identifier  \\"Mouse0\\"
   Driver      \\"mouse\\"
   Option       \\"Protocol\\" \\"auto\\"
   Option       \\"Device\\" \\"/dev/input/mice\\"
EndSection

Section \\"Monitor\\"
   Identifier   \\"Monitor0\\"
   VendorName   \\"Monitor Vendor\\"
   ModelName    \\"Monitor Model\\"
EndSection

Section \\"Device\\"
        ### Available Driver options are:-
        ### Values: : integer, : float, : \\"True\\"/\\"False\\",
        ### : \\"String\\", : \\" Hz/kHz/MHz\\"
        ### [arg]: arg optional
        #Option     \\"DigitalVibrance\\"       #
        #Option     \\"NoFlip\\"                # []
        #Option     \\"Dac8Bit\\"               # []
        #Option     \\"NoLogo\\" \\"true\\"               # []
        #Option     \\"UBB\\"                   # []
        #Option     \\"Stereo\\"                #
        #Option     \\"SWcursor\\"              # []
        #Option     \\"HWcursor\\"              # []
        #Option     \\"VideoKey\\"              #
        Option     \\"NvAGP\\"   \\"2\\"               #
        #Option     \\"IgnoreEDID\\"            # []
        #Option     \\"NoDDC\\"                 # []
        #Option     \\"ConnectedMonitor\\"      #
        #Option     \\"ConnectedMonitors\\"     #
        #Option     \\"TVStandard\\"            #
        #Option     \\"TVOutFormat\\"           #
        Option     \\"RenderAccel\\" \\"true\\"          # []
        #Option     \\"CursorShadow\\"          # []
        #Option     \\"CursorShadowAlpha\\"     #
        #Option     \\"CursorShadowXOffset\\"    #
        #Option     \\"CursorShadowYOffset\\"    #
        #Option     \\"UseEdidFreqs\\"          # []
        #Option     \\"FlatPanelProperties\\"    #
        #Option     \\"TwinView\\"              # []
        #Option     \\"TwinViewOrientation\\"    #
        #Option     \\"SecondMonitorHorizSync\\"    #
        #Option     \\"SecondMonitorVertRefresh\\"    #
        #Option     \\"MetaModes\\"             #
        #Option     \\"UseInt10Module\\"        # []
        #Option     \\"NoTwinViewXineramaInfo\\"    # []
        #Option     \\"NoRenderExtension\\"     # []
        #Option     \\"Overlay\\"               # []
        #Option     \\"CIOverlay\\"             # []
        #Option     \\"ForceEmulatedOverlay\\"    # []
        #Option     \\"TransparentIndex\\"      #
        #Option     \\"OverlayDefaultVisual\\"    # []
        #Option     \\"NvEmulate\\"             #
        #Option     \\"NoBandWidthTest\\"       # []
        #Option     \\"CustomEDID-CRT-0\\"      #
        #Option     \\"CustomEDID-CRT-1\\"      #
        #Option     \\"CustomEDID-DFP-0\\"      #
        #Option     \\"CustomEDID-DFP-1\\"      #
        #Option     \\"CustomEDID-TV-0\\"       #
        #Option     \\"CustomEDID-TV-1\\"       #
        #Option     \\"TVOverScan\\"            #
        #Option     \\"IgnoreDisplayDevices\\"    #
        #Option     \\"MultisampleCompatibility\\"    # []
        #Option     \\"RegistryDwords\\"        #
        #Option     \\"RegistryBinary\\"        #
        #Option     \\"NoPowerConnectorCheck\\"    # []
        #Option     \\"AllowDFPStereo\\"        # []
        #Option     \\"XvMCUsesTextures\\"      # []
        #Option     \\"HorizSync\\"             #
        #Option     \\"VertRefresh\\"           #
        #Option     \\"AllowGLXWithComposite\\"    # []
        #Option     \\"RandRRotation\\"         # []
        #Option     \\"ExactModeTimingsDVI\\"    # []
        #Option     \\"Coolbits\\"              #
        #Option     \\"AllowDDCCI\\"            # []
        #Option     \\"ConstantFrameRateHint\\"    # []
        #Option     \\"LoadKernelModule\\"      # []
        #Option     \\"ClearCube\\"             # []
        #Option     \\"PredefinedTimings\\"     #
        #Option     \\"EmulatedOverlaysTimerMs\\"    #
   Identifier  \\"Card0\\"
   Driver      \\"nvidia\\"
   VendorName  \\"nVidia Corporation\\"
   BoardName   \\"NV17 [GeForce4 MX 420]\\"
   BusID       \\"PCI:1:0:0\\"
EndSection

Section \\"Screen\\"
   Identifier \\"Screen0\\"
   Device     \\"Card0\\"
   Monitor    \\"Monitor0\\"
        DefaultDepth 16
      SubSection \\"Display\\"
      Viewport   0 0
      Depth     16
      Modes       \\"1024x768\\" \\"800x600\\" \\"640x480\\"
   EndSubSection
   SubSection \\"Display\\"
      Viewport   0 0
      Depth     24
   EndSubSection
EndSection

-------------------------------------------------------------
Serdecznie dziękuję za wszelką pomoc...

Offline

  • Users
  • Nowy na forum
  • *
  • Wiadomości: 20
    • Zobacz profil
X'y sie nie laduja...
« Odpowiedź #1 dnia: 2005-12-29, 09:35:48 »
Witam Ponownie. Długo czekałem na odpowiedź i się nie doczekałem. W tym czasie udało mi się dojść do rozwiązania... swoją drogą dosyć dziwnego. Chodziło o to że karta była włożona do slotu tylko w połowie. W internecie znalazłem wielu użytkowników z problemem jaki miałem. Proponuję aby sprawdzili czy ich karty graf. są odpowiednio włożone do slotu:)

Offline Milosz J

  • Users
  • Użytkownik
  • **
  • Wiadomości: 58
    • Zobacz profil
X'y sie nie laduja...
« Odpowiedź #2 dnia: 2005-12-08, 14:32:46 »
Witam. Ostatnio kupilem Radeona 9550, zainstalwoalem sterownik, skonfigurowalem wszytko ok, restartuje system, wszystko sie laduje tyle ze nie moga wlaczyc sie x'y a konkretniej widze caalutki ekran czarny i nie moge go ani wlaczyc ani wylaczyc co rowna sie restartowi systemu no i zostalem skazany na windowsa :/

Offline Maciej Rutecki

  • Administrator
  • Guru
  • *****
  • Wiadomości: 2107
    • Zobacz profil
X'y sie nie laduja...
« Odpowiedź #3 dnia: 2005-12-08, 17:13:53 »
2005-12-08 14:32:46 Arial napisał:

> Witam. Ostatnio kupilem Radeona 9550, zainstalwoalem sterownik, skonfigurowalem wszytko ok,
 > restartuje system, wszystko sie laduje tyle ze nie moga wlaczyc sie x'y a konkretniej widze
 > caalutki ekran czarny i nie moge go ani wlaczyc ani wylaczyc co rowna sie restartowi systemu no
 > i zostalem skazany na windowsa :/

A coś więcej: system, jądro...?

Co mówi /var/log/Xfree86.log(xorg.log)?

--
Maciek

Offline Milosz J

  • Users
  • Użytkownik
  • **
  • Wiadomości: 58
    • Zobacz profil
X'y sie nie laduja...
« Odpowiedź #4 dnia: 2005-12-08, 17:24:44 »
troche dlugi ale wkleilem caly, co do x mam xorg:
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
    Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
EndSection

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"       # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"

# This loads the GLX module
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath     "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

#    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
#    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the / mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier     "Keyboard1"
    Driver     "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option "Protocol"   "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option "Xleds"      "1 2 3"

#    Option "LeftAlt"    "Meta"
#    Option "RightAlt"   "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"   "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"   "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"  "de"
# or:
#    Option "XkbLayout"  "de"
#    Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    Option "XkbRules"   "xfree86"
#    Option "XkbModel"   "pc101"
#    Option "XkbLayout"  "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""

#    Option "XkbDisable"

    Option "XkbRules"     "xfree86"
    Option "XkbModel"     "pc101"
    Option "XkbLayout"     "pl"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier     "Mouse1"
    Driver "mouse"
    Option "Protocol"   "ImPS/2"
    Option "ZAxisMapping"   "4 5"
    Option "Device"     "/dev/mouse"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"   "9600"
#    Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "1412"
#    Option     "MaxX"           "15184"
#    Option     "MinY"           "15372"
#    Option     "MaxY"           "1230"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "231"
#    Option     "MaxX"           "3868"
#    Option     "MinY"           "3858"
#    Option     "MaxY"           "272"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonThreshold"    "17"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier  "Monitor0"
    HorizSync   31.5 - 48.4
    VertRefresh 50 - 70
    Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset     "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver      "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.

#    BusID       "PCI:0:10:0"

#    VideoRam    256

#    Clocks      25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === misc DRI settings ===
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
    Option "DesktopSetup"               "(null)"
    Option "HSync2"                     "unspecified"
    Option "VRefresh2"                  "unspecified"
    Option "ScreenOverlap"              "0"
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
    Option "CapabilitiesEx"             "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "yes"
    Option "FSAAScale"                  "6"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "yes"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:1:0:0"    # vendor=1002, device=4153
    Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

    Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###

Offline Milosz J

  • Users
  • Użytkownik
  • **
  • Wiadomości: 58
    • Zobacz profil
X'y sie nie laduja...
« Odpowiedź #5 dnia: 2005-12-08, 17:29:13 »
Co do systemu: Mandriva 2005LE, jadro 2.6.11-6, KDE 3.3.2 - czyli wsszystko podstawowe

Offline Maciej Rutecki

  • Administrator
  • Guru
  • *****
  • Wiadomości: 2107
    • Zobacz profil
X'y sie nie laduja...
« Odpowiedź #6 dnia: 2005-12-08, 18:56:34 »
2005-12-08 17:29:13 Arial napisał:

> Co do systemu: Mandriva 2005LE, jadro 2.6.11-6, KDE 3.3.2 - czyli wsszystko podstawowe

Prosiłem o logi a nie konfiga (ten tez może się przydać :-)) poszukaj linii zaczynających się od "EE" w /var/log/Xfree86.log(xorg.log) - lub podobnym. Zobaczymy czego się czepia.

--
Maciek

Offline Milosz J

  • Users
  • Użytkownik
  • **
  • Wiadomości: 58
    • Zobacz profil
X'y sie nie laduja...
« Odpowiedź #7 dnia: 2005-12-09, 16:29:22 »
z logiem xorga bedzie ciezko... tzn mam logi ale stare jeszcze bez sterownika, a ze kompa musze wylaczac guzikiem pewnie logi nie sa zapisywane w systemie... jakby dalo sie odpalic go w trybie txt to juz by bylo pol sukcesu...

Offline Remigiusz Witkowski

  • Users
  • Guru
  • *****
  • Wiadomości: 594
    • Zobacz profil
X'y sie nie laduja...
« Odpowiedź #8 dnia: 2005-12-09, 17:11:12 »
2005-12-08 14:32:46 Arial napisał:

> Witam. Ostatnio kupilem Radeona 9550, zainstalwoalem sterownik, skonfigurowalem wszytko ok,
 > restartuje system, wszystko sie laduje tyle ze nie moga wlaczyc sie x'y a konkretniej widze
 > caalutki ekran czarny i nie moge go ani wlaczyc ani wylaczyc co rowna sie restartowi systemu no
 > i zostalem skazany na windowsa :/
 
Zaladuj z "failsafe" bedziesz mial txt.
Ustaw AGPX4 moze X wystartuje, chyba ze shrzaniles fglrxconfig.

Offline

  • Users
  • Nowy na forum
  • *
  • Wiadomości: 20
    • Zobacz profil
X'y sie nie laduja...
« Odpowiedź #9 dnia: 2005-12-09, 20:02:17 »
sprobuj w fglrxconfig na pytanie o "the external AGP GART module" odpowiedziec tak, sprawdz tez czy wpisujesz dobre odswiezania monitora i koniecznie sprawdz czy wpisujesz dobra sciezke do myszki, nie pamietam jaka jest w mdk ale np. w slacku nie jest domyslnie /dev/input/mice tylko /dev/mouse. Jak juz to wszystko sprawdzisz i nie pomoze to odpal w failsafe XFdrake. Poprobuj i potestuj rozne ustawienia i jak sie uda to odpal X-y i poczytaj logi.

Offline Remigiusz Witkowski

  • Users
  • Guru
  • *****
  • Wiadomości: 594
    • Zobacz profil
X'y sie nie laduja...
« Odpowiedź #10 dnia: 2005-12-10, 12:25:42 »
2005-12-09 20:02:17 drogi napisał:

> sprobuj w fglrxconfig na pytanie o "the external AGP GART module" odpowiedziec tak,
 > sprawdz tez czy wpisujesz dobre odswiezania monitora i koniecznie sprawdz czy wpisujesz dobra
 > sciezke do myszki, nie pamietam jaka jest w mdk ale np. w slacku nie jest domyslnie
 > /dev/input/mice tylko /dev/mouse. Jak juz to wszystko sprawdzisz i nie pomoze to odpal w
 > failsafe XFdra

Offline Remigiusz Witkowski

  • Users
  • Guru
  • *****
  • Wiadomości: 594
    • Zobacz profil
X'y sie nie laduja...
« Odpowiedź #11 dnia: 2005-12-10, 12:52:14 »
2005-12-10 12:25:42 xadmi napisał:

> 2005-12-09 20:02:17 drogi napisał:
 >
 > > sprobuj w fglrxconfig na pytanie o "the external AGP GART module" odpowiedziec
 > tak,
 >  > sprawdz tez czy wpisujesz dobre odswiezania monitora i koniecznie sprawdz czy wpisujesz
 > dobra
 >  > sciezke do myszki, nie pamietam jaka jest w mdk ale np. w slacku nie jest domyslnie
 >  > /dev/input/mice tylko /dev/mouse. Jak juz to wszystko sprawdzisz i nie pomoze to odpal w
 >  > failsafe XFdra

 Ooops ...pomyłka ...

Offline Remigiusz Witkowski

  • Users
  • Guru
  • *****
  • Wiadomości: 594
    • Zobacz profil
X'y sie nie laduja...
« Odpowiedź #12 dnia: 2005-12-10, 12:56:02 »
2005-12-09 16:29:22 Arial napisał:

> z logiem xorga bedzie ciezko... tzn mam logi ale stare jeszcze bez sterownika, a ze kompa musze
 > wylaczac guzikiem pewnie logi nie sa zapisywane w systemie... jakby dalo sie odpalic go w
 > trybie txt to juz by bylo pol sukcesu...

 Jak już będziesz w  "txt" ( :D ) to wykonaj :
  #mcc
  dalej zobaczysz ...:)