Nowe posty

Pokaż wiadomości

Ta sekcja pozwala Ci zobaczyć wszystkie wiadomości wysłane przez tego użytkownika. Zwróć uwagę, że możesz widzieć tylko wiadomości wysłane w działach do których masz aktualnie dostęp.


Wiadomości -

Strony: [1]
1
Na aukcji pisze WM8650 ( Wonder Media ) myślę, że Uberoid powienien zagrać czytałem też gdzieś o próbie instalacji arch-linuxa nie wiem jaka procedura instalacji i jaka stabilność systemu. Również zgadzam się z przedmówcą co do samej jakości sprzętu, za tą cenę coś używanego ale lepszego.

Pozdrawiam :)

2
Właśnie nie wyrywa i nie montuje, nie może rozpoznać systemu plików tak mi się wydaje. Sprawdzałem na kernelu 3.16.2 i to samo a nawet laptop działa jeszcze gorzej.
Dodam, że ta sama karta w przejściówce na USB działa poprawnie ( niestety użytkowanie w ten sposób odpada bo  w lapku tylko 1 port USB którego podłączam myszke - abstrahując od tematu karty, to czy da się wykorzystać port i.link ( aka FireWire) do podłączenia czegokolwiek? )

3
Witam,

Jest to mój pierwszy post dlatego proszę o wyrozumiałość,

Od niedawna działam na laptopie Sony VAIO PCG-3192, tydzien temu zaistalowałem linuxa, dokładniej najnowszą wersje antiX-a wszystko pieknie smiga, jedynym mankamentem jest karta SD ( a właściwie microSD w przejściówce na Memory Stick PRO Duo a ta z kolei  w przejściówce na Memory Stick Duo wiem ze duzo kombinacji ale takie wejscie w laptopie )

Zrzut a dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.7.10-antix.5-486-smp (unknown) (root@antiX1) (gcc version 4.8.1 (Debian 4.8.1-10) ) #2 SMP Tue Oct 15 20:58:22 EEST 2013
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000ea000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000007feffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000007ff0000-0x0000000007fff7ff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000007fff800-0x0000000007ffffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.1 present.
[    0.000000] DMI: Sony Corporation     PCG-SR1K(DE)        /PCG-SR1K(DE)        , BIOS R0203D0 05/12/00
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7ff0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FF8000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x07feffff]
[    0.000000]  [mem 0x00000000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x07bfffff] page 2M
[    0.000000]  [mem 0x07c00000-0x07feffff] page 4k
[    0.000000] kernel direct mapping tables up to 0x7feffff @ [mem 0x01bfa000-0x01bfffff]
[    0.000000] RAMDISK: [mem 0x073a2000-0x07fdffff]
[    0.000000] ACPI: RSDP 000f8020 00014 (v00 SONY  )
[    0.000000] ACPI: RSDT 07ffcf78 0002C (v01 SONY   D0       20000512 PTL  00000000)
[    0.000000] ACPI: FACP 07fff765 00074 (v01 SONY   D0       20000512 PTL  000F4240)
[    0.000000] ACPI: DSDT 07ffcfa4 027C1 (v01   SONY  D0      20000512 MSFT 01000007)
[    0.000000] ACPI: FACS 07ffffc0 00040
[    0.000000] ACPI: BOOT 07fff7d9 00027 (v01 SONY   D0       20000512 PTL  00000001)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 127MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 07ff0000
[    0.000000]   low ram: 0 - 07ff0000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x07feffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x07feffff]
[    0.000000] On node 0 totalpages: 32639
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 224 pages used for memmap
[    0.000000]   Normal zone: 28432 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] APIC: disable apic facility
[    0.000000] APIC: switched to apic NOOP
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ea000
[    0.000000] PM: Registered nosave memory: 00000000000ea000 - 0000000000100000
[    0.000000] e820: [mem 0x08000000-0xfff7ffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 12 pages/cpu @c728a000 s26368 r0 d22784 u49152
[    0.000000] pcpu-alloc: s26368 r0 d22784 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32383
[    0.000000] Kernel command line: root=/dev/sda2 quiet
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 109928k/131008k available (4138k kernel code, 20628k reserved, 1853k data, 420k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xc87f0000 - 0xff7fe000   ( 880 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc7ff0000   ( 127 MB)
[    0.000000]       .init : 0xc15da000 - 0xc1643000   ( 420 kB)
[    0.000000]       .data : 0xc140a880 - 0xc15d9f80   (1853 kB)
[    0.000000]       .text : 0xc1000000 - 0xc140a880   (4138 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=c6c06000 soft=c6c08000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 494.235 MHz processor
[    0.008006] Calibrating delay loop (skipped), value calculated using timer frequency.. 988.47 BogoMIPS (lpj=1976940)
[    0.008025] pid_max: default: 32768 minimum: 301
[    0.008202] Security Framework initialized
[    0.008226] SELinux:  Disabled at boot.
[    0.008286] Mount-cache hash table entries: 512
[    0.009283] Initializing cgroup subsys cpuacct
[    0.009299] Initializing cgroup subsys devices
[    0.009311] Initializing cgroup subsys freezer
[    0.009322] Initializing cgroup subsys blkio
[    0.009333] Initializing cgroup subsys perf_event
[    0.009482] mce: CPU supports 5 MCE banks
[    0.009575] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
[    0.009575] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
[    0.009575] tlb_flushall_shift: 6
[    0.018199] Freeing SMP alternatives: 12k freed
[    0.019459] ACPI: Core revision 20120913
[    0.030955] smpboot: weird, boot CPU (#0) not listed by the BIOS
[    0.030970] smpboot: SMP motherboard not detected
[    0.030981] smpboot: Local APIC not detected. Using dummy APIC emulation.
[    0.030990] smpboot: SMP disabled
[    0.030999] Performance Events:
[    0.031013] no APIC, boot with the "lapic" boot parameter to force-enable it.
[    0.031022] no hardware sampling interrupt available.
[    0.031035] p6 PMU driver.
[    0.031047] ... version:                0
[    0.031056] ... bit width:              32
[    0.031064] ... generic registers:      2
[    0.031073] ... value mask:             00000000ffffffff
[    0.031082] ... max period:             000000007fffffff
[    0.031091] ... fixed-purpose events:   0
[    0.031099] ... event mask:             0000000000000003
[    0.032044] Brought up 1 CPUs
[    0.032061] smpboot: Total of 1 processors activated (988.47 BogoMIPS)
[    0.032847] devtmpfs: initialized
[    0.034119] PM: Registering ACPI NVS region [mem 0x07fff800-0x07ffffff] (2048 bytes)
[    0.034613] regulator-dummy: no parameters
[    0.034943] NET: Registered protocol family 16
[    0.035587] ACPI: bus type pci registered
[    0.052547] PCI: PCI BIOS revision 2.10 entry at 0xfd9be, last bus=1
[    0.052559] PCI: Using configuration type 1 for base access
[    0.058735] bio: create slab at 0
[    0.059175] ACPI: Added _OSI(Module Device)
[    0.059191] ACPI: Added _OSI(Processor Device)
[    0.059204] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.059216] ACPI: Added _OSI(Processor Aggregator Device)
[    0.061491] ACPI: EC: Look up EC in DSDT
[    0.073210] ACPI: Interpreter enabled
[    0.073276] ACPI: (supports S0 S1 S3 S4 S5)
[    0.073395] ACPI: Using PIC for interrupt routing
[    0.098534] ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
[    0.098953] ACPI: No dock devices found.
[    0.098989] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.102963] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.110572] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.110592] pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
[    0.110609] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[    0.110626] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.110642] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.110659] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[    0.110675] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
[    0.110692] pci_root PNP0A03:00: host bridge window [mem 0x000e4000-0x000e7fff] (ignored)
[    0.110709] pci_root PNP0A03:00: host bridge window [mem 0x08000000-0xffdfffff] (ignored)
[    0.110726] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.110742] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.110755] PCI: root bus 00: using default resources
[    0.110774] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.110928] PCI host bridge to bus 0000:00
[    0.110950] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.110967] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.110984] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.111032] pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
[    0.111066] pci 0000:00:00.0: reg 10: [mem 0x40000000-0x40ffffff pref]
[    0.111190] pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
[    0.111285] pci 0000:00:07.0: [8086:7110] type 00 class 0x060100
[    0.111424] pci 0000:00:07.1: [8086:7111] type 00 class 0x010180
[    0.111499] pci 0000:00:07.1: reg 20: [io  0xfcf0-0xfcff]
[    0.111606] pci 0000:00:07.2: [8086:7112] type 00 class 0x0c0300
[    0.111685] pci 0000:00:07.2: reg 20: [io  0xfcc0-0xfcdf]
[    0.111766] pci 0000:00:07.3: [8086:7113] type 00 class 0x068000
[    0.111879] pci 0000:00:07.3: quirk: [io  0x8000-0x803f] claimed by PIIX4 ACPI
[    0.111899] pci 0000:00:07.3: quirk: [io  0x1040-0x104f] claimed by PIIX4 SMB
[    0.111980] pci 0000:00:08.0: [104d:8039] type 00 class 0x0c0010
[    0.112049] pci 0000:00:08.0: reg 10: [mem 0xfedff000-0xfedff7ff]
[    0.112078] pci 0000:00:08.0: reg 14: [mem 0xfedffc00-0xfedffdff]
[    0.112145] pci 0000:00:08.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.112236] pci 0000:00:09.0: [1073:0012] type 00 class 0x040100
[    0.112274] pci 0000:00:09.0: reg 10: [mem 0xfedf0000-0xfedf7fff]
[    0.112302] pci 0000:00:09.0: reg 14: [io  0xfc40-0xfc7f]
[    0.112328] pci 0000:00:09.0: reg 18: [io  0xfcec-0xfcef]
[    0.112421] pci 0000:00:09.0: supports D2
[    0.112470] pci 0000:00:0a.0: [14f1:2443] type 00 class 0x078000
[    0.112508] pci 0000:00:0a.0: reg 10: [mem 0xfede0000-0xfedeffff]
[    0.112535] pci 0000:00:0a.0: reg 14: [io  0xfce0-0xfce7]
[    0.112636] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.112691] pci 0000:00:0c.0: [1180:0475] type 02 class 0x060700
[    0.112729] pci 0000:00:0c.0: reg 10: [mem 0x00000000-0x00000fff]
[    0.112781] pci 0000:00:0c.0: supports D1 D2
[    0.112797] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.112904] pci 0000:01:00.0: [10c8:0025] type 00 class 0x030000
[    0.112942] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff pref]
[    0.112969] pci 0000:01:00.0: reg 14: [mem 0xfe800000-0xfebfffff]
[    0.112996] pci 0000:01:00.0: reg 18: [mem 0xfec00000-0xfecfffff]
[    0.113083] pci 0000:01:00.0: supports D1 D2
[    0.113155] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.113178] pci 0000:00:01.0:   bridge window [mem 0xfe800000-0xfecfffff]
[    0.113197] pci 0000:00:01.0:   bridge window [mem 0xfd000000-0xfdffffff pref]
[    0.113220] pci 0000:00:0c.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.113290] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05
[    0.113311] pci_bus 0000:00: on NUMA node 0
[    0.113334] ACPI: PCI Interrupt Routing Table [\\_SB_.PCI0._PRT]
[    0.113790]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.113806]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.121950] ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
[    0.122245] ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0, disabled.
[    0.122536] ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0, disabled.
[    0.122828] ACPI: PCI Interrupt Link [LNKD] (IRQs 9) *0, disabled.
[    0.123267] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.123279] vgaarb: loaded
[    0.123288] vgaarb: bridge control possible 0000:01:00.0
[    0.123836] SCSI subsystem initialized
[    0.123853] ACPI: bus type scsi registered
[    0.124112] libata version 3.00 loaded.
[    0.124238] ACPI: bus type usb registered
[    0.124382] usbcore: registered new interface driver usbfs
[    0.124460] usbcore: registered new interface driver hub
[    0.124587] usbcore: registered new device driver usb
[    0.124787] PCI: Using ACPI for IRQ routing
[    0.124804] PCI: pci_cache_line_size set to 32 bytes
[    0.124905] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.124919] e820: reserve RAM buffer [mem 0x07ff0000-0x07ffffff]
[    0.125448] NetLabel: Initializing
[    0.125459] NetLabel:  domain hash size = 128
[    0.125468] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.125530] NetLabel:  unlabeled traffic allowed by default
[    0.125661] Switching to clocksource pit
[    0.125965] pnp: PnP ACPI init
[    0.126019] ACPI: bus type pnp registered
[    0.128402] pnp 00:00: [bus 00-ff]
[    0.128423] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.128440] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.128457] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.128473] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.128489] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.128505] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.128521] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.128537] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.128553] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.128569] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.128585] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.128618] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.128635] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.128651] pnp 00:00: [mem 0x08000000-0xffdfffff window]
[    0.128667] pnp 00:00: [mem 0x00000000 window]
[    0.128683] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.128699] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.128715] pnp 00:00: [io  0x0d00-0xffff window]
[    0.128859] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.129286] pnp 00:01: [io  0x0080]
[    0.129303] pnp 00:01: [io  0x00b2-0x00b3]
[    0.129319] pnp 00:01: [io  0x0398-0x0399]
[    0.129334] pnp 00:01: [io  0x04d0-0x04d1]
[    0.129349] pnp 00:01: [io  0x1040-0x104f]
[    0.129363] pnp 00:01: [io  0x8000-0x804f]
[    0.129378] pnp 00:01: [io  0x0072-0x0073]
[    0.129544] system 00:01: [io  0x0398-0x0399] has been reserved
[    0.129564] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.129582] system 00:01: [io  0x1040-0x104f] has been reserved
[    0.129601] system 00:01: [io  0x8000-0x804f] could not be reserved
[    0.129623] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.130859] pnp 00:02: [mem 0x00100000-0x07ffffff]
[    0.130877] pnp 00:02: [mem 0x00000000-0x0009ffff]
[    0.130893] pnp 00:02: [mem 0x000dc000-0x000dffff]
[    0.130909] pnp 00:02: [mem 0x000e0000-0x000fffff]
[    0.130925] pnp 00:02: [mem 0xfff80000-0xffffffff]
[    0.130940] pnp 00:02: [mem 0xfff7f600-0xfff7ffff]
[    0.131116] system 00:02: [mem 0x00100000-0x07ffffff] could not be reserved
[    0.131137] system 00:02: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.131156] system 00:02: [mem 0x000dc000-0x000dffff] has been reserved
[    0.131175] system 00:02: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.131194] system 00:02: [mem 0xfff80000-0xffffffff] has been reserved
[    0.131212] system 00:02: [mem 0xfff7f600-0xfff7ffff] has been reserved
[    0.131232] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.131335] pnp 00:03: [io  0x0000-0x000f]
[    0.131352] pnp 00:03: [io  0x0081-0x008f]
[    0.131368] pnp 00:03: [io  0x00c0-0x00df]
[    0.131384] pnp 00:03: [dma 4]
[    0.131491] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.131589] pnp 00:04: [io  0x0070-0x0071]
[    0.131611] pnp 00:04: [irq 8]
[    0.131720] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.131860] pnp 00:05: [io  0x00f0-0x00ff]
[    0.131877] pnp 00:05: [irq 13]
[    0.131987] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.132131] pnp 00:06: [io  0x0061]
[    0.132291] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.132389] pnp 00:07: [io  0x0060]
[    0.132406] pnp 00:07: [io  0x0064]
[    0.132422] pnp 00:07: [irq 1]
[    0.132532] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.132591] pnp 00:08: [irq 12]
[    0.132703] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.134529] pnp 00:09: Plug and Play ACPI device, IDs SNY6001 (disabled)
[    0.134922] pnp: PnP ACPI: found 10 devices
[    0.134933] ACPI: ACPI bus type pnp unregistered
[    0.178748] Switching to clocksource acpi_pm
[    0.178920] pci 0000:00:0c.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.178941] pci 0000:00:0c.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[    0.178960] pci 0000:00:0c.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.178977] pci 0000:00:0c.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.179011] pci 0000:00:0c.0: BAR 0: assigned [mem 0x08000000-0x08000fff]
[    0.179042] pci 0000:00:0c.0: BAR 15: assigned [mem 0x0c000000-0x0fffffff pref]
[    0.179065] pci 0000:00:0c.0: BAR 16: assigned [mem 0x10000000-0x13ffffff]
[    0.179089] pci 0000:00:08.0: BAR 6: assigned [mem 0x08010000-0x0801ffff pref]
[    0.179114] pci 0000:00:0c.0: BAR 13: assigned [io  0x1400-0x14ff]
[    0.179136] pci 0000:00:0c.0: BAR 14: assigned [io  0x1800-0x18ff]
[    0.179160] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.179181] pci 0000:00:01.0:   bridge window [mem 0xfe800000-0xfecfffff]
[    0.179200] pci 0000:00:01.0:   bridge window [mem 0xfd000000-0xfdffffff pref]
[    0.179222] pci 0000:00:0c.0: CardBus bridge to [bus 02-05]
[    0.179237] pci 0000:00:0c.0:   bridge window [io  0x1400-0x14ff]
[    0.179255] pci 0000:00:0c.0:   bridge window [io  0x1800-0x18ff]
[    0.179274] pci 0000:00:0c.0:   bridge window [mem 0x0c000000-0x0fffffff pref]
[    0.179292] pci 0000:00:0c.0:   bridge window [mem 0x10000000-0x13ffffff]
[    0.179336] pci 0000:00:01.0: power state changed by ACPI to D0
[    0.180268] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
[    0.180282] PCI: setting IRQ 9 as level-triggered
[    0.180304] pci 0000:00:0c.0: setting latency timer to 64
[    0.180325] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.180342] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.180360] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfecfffff]
[    0.180377] pci_bus 0000:01: resource 2 [mem 0xfd000000-0xfdffffff pref]
[    0.180393] pci_bus 0000:02: resource 0 [io  0x1400-0x14ff]
[    0.180409] pci_bus 0000:02: resource 1 [io  0x1800-0x18ff]
[    0.180426] pci_bus 0000:02: resource 2 [mem 0x0c000000-0x0fffffff pref]
[    0.180442] pci_bus 0000:02: resource 3 [mem 0x10000000-0x13ffffff]
[    0.180671] NET: Registered protocol family 2
[    0.181427] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.181566] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.181692] TCP: Hash tables configured (established 4096 bind 4096)
[    0.181825] TCP: reno registered
[    0.181844] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.181886] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.182211] NET: Registered protocol family 1
[    0.182386] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.182464] pci 0000:00:07.2: power state changed by ACPI to D0
[    0.183391] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[    0.183482] pci 0000:01:00.0: Boot video device
[    0.183498] PCI: CLS 32 bytes, default 32
[    0.183781] Trying to unpack rootfs image as initramfs...
[    1.998519] Freeing initrd memory: 12536k freed
[    2.086005] Simple Boot Flag at 0x35 set to 0x1
[    2.087559] audit: initializing netlink socket (disabled)
[    2.087622] type=2000 audit(1410008233.082:1): initialized
[    2.173755] bounce pool size: 64 pages
[    2.173834] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    2.183408] VFS: Disk quotas dquot_6.5.2
[    2.183718] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.186399] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.187152] NTFS driver 2.1.30 [Flags: R/W].
[    2.187476] fuse init (API version 7.20)
[    2.188768] aufs 3.x-rcN-20121126
[    2.188795] msgmni has been set to 239
[    2.190740] alg: No test for stdrng (krng)
[    2.191013] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    2.191164] io scheduler noop registered
[    2.191175] io scheduler deadline registered
[    2.191219] io scheduler cfq registered (default)
[    2.192267] intel_idle: does not run on family 6 model 8
[    2.192370] GHES: HEST is not enabled!
[    2.192605] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.194556] toshiba: not a supported Toshiba laptop
[    2.202176] brd: module loaded
[    2.206463] loop: module loaded
[    2.207240] ata_piix 0000:00:07.1: version 2.13
[    2.208986] scsi0 : ata_piix
[    2.209788] scsi1 : ata_piix
[    2.210348] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xfcf0 irq 14
[    2.210363] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xfcf8 irq 15
[    2.212522] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.212645] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.212755] uhci_hcd: USB Universal Host Controller Interface driver
[    2.212898] uhci_hcd 0000:00:07.2: UHCI Host Controller
[    2.212935] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[    2.213016] uhci_hcd 0000:00:07.2: irq 9, io base 0x0000fcc0
[    2.213233] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    2.213251] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.213266] usb usb1: Product: UHCI Host Controller
[    2.213281] usb usb1: Manufacturer: Linux 3.7.10-antix.5-486-smp uhci_hcd
[    2.213295] usb usb1: SerialNumber: 0000:00:07.2
[    2.213912] hub 1-0:1.0: USB hub found
[    2.213943] hub 1-0:1.0: 2 ports detected
[    2.214446] Initializing USB Mass Storage driver...
[    2.214567] usbcore: registered new interface driver usb-storage
[    2.214577] USB Mass Storage support registered.
[    2.214628] usbcore: registered new interface driver ums-alauda
[    2.214679] usbcore: registered new interface driver ums-cypress
[    2.214730] usbcore: registered new interface driver ums-datafab
[    2.214780] usbcore: registered new interface driver ums-freecom
[    2.214831] usbcore: registered new interface driver ums-isd200
[    2.214895] usbcore: registered new interface driver ums-jumpshot
[    2.214947] usbcore: registered new interface driver ums-karma
[    2.214998] usbcore: registered new interface driver ums-onetouch
[    2.215051] usbcore: registered new interface driver ums-sddr09
[    2.215103] usbcore: registered new interface driver ums-sddr55
[    2.215155] usbcore: registered new interface driver ums-usbat
[    2.215400] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    2.219011] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.219046] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.219669] mousedev: PS/2 mouse device common for all mice
[    2.219914] rtc_cmos 00:04: RTC can wake from S4
[    2.220320] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    2.220369] rtc0: alarms up to one month, y3k, 114 bytes nvram
[    2.220423] cpuidle: using governor ladder
[    2.220434] cpuidle: using governor menu
[    2.220449] ledtrig-cpu: registered to indicate activity on CPUs
[    2.220460] No iBFT detected.
[    2.221128] usbcore: registered new interface driver usbhid
[    2.221137] usbhid: USB HID core driver
[    2.222183] TCP: cubic registered
[    2.222851] NET: Registered protocol family 10
[    2.223973] Key type dns_resolver registered
[    2.224636] Using IPI No-Shortcut mode
[    2.225060] registered taskstats version 1
[    2.225074] IMA: No TPM chip found, activating TPM-bypass!
[    2.226251] hd: no drives specified - use hd=cyl,head,sectors on kernel command line
[    2.226396] rtc_cmos 00:04: setting system clock to 2014-09-06 12:57:13 UTC (1410008233)
[    2.250459] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.524083] usb 1-2: new full-speed USB device number 2 using uhci_hcd
[    2.756113] usb 1-2: New USB device found, idVendor=054c, idProduct=0032
[    2.756133] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.756148] usb 1-2: Product: USB Memory Stick Slot
[    2.756162] usb 1-2: Manufacturer: Sony
[    2.758404] usb-storage 1-2:1.0: Quirks match for vid 054c pid 0032: 1
[    2.758494] scsi2 : usb-storage 1-2:1.0
[    2.941548] ata1.00: ATA-4: IBM-DARA-209000, AR3OA53A, max UDMA/66
[    2.941566] ata1.00: 17660160 sectors, multi 16: LBA
[    2.984328] ata1.00: configured for UDMA/33
[    2.984892] scsi 0:0:0:0: Direct-Access     ATA      IBM-DARA-209000  AR3O PQ: 0 ANSI: 5
[    2.985746] sd 0:0:0:0: [sda] 17660160 512-byte logical blocks: (9.04 GB/8.42 GiB)
[    2.986067] sd 0:0:0:0: [sda] Write Protect is off
[    2.986087] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.986254] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.028325]  sda: sda1 sda2
[    3.029715] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.029826] Freeing unused kernel memory: 420k freed
[    3.084207] tsc: Refined TSC clocksource calibration: 494.270 MHz
[    3.084239] Switching to clocksource tsc
[    3.335071] udevd[64]: starting version 175
[    3.659062] thermal LNXTHERM:00: registered as thermal_zone0
[    3.659081] ACPI: Thermal Zone [ATF0] (51 C)
[    3.814168] scsi 2:0:0:0: Direct-Access     Sony     MSC-U01N         1.00 PQ: 0 ANSI: 0 CCS
[    4.070066] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    4.072399] firewire_ohci 0000:00:08.0: enabling device (0000 -> 0002)
[    4.129389] firewire_ohci 0000:00:08.0: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x0
[    4.429713] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.430212] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    4.628524] firewire_core 0000:00:08.0: created device fw0: GUID 080046030056f6e4, S400
[    5.026802] device-mapper: uevent: version 1.0.3
[    5.029097] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
[    5.118469] Btrfs loaded
[    9.952762] udevd[329]: starting version 175
[   10.785768] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   10.791904] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.840645] tsc: Marking TSC unstable due to TSC halts in idle
[   10.840691] ACPI: acpi_idle registered with cpuidle
[   10.844389] Switching to clocksource acpi_pm
[   10.903175] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[   10.903210] ACPI: Power Button [PWRB]
[   10.922736] Linux agpgart interface v0.103
[   10.945861] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[   10.968454] agpgart-intel 0000:00:00.0: AGP aperture is 16M @ 0x40000000
[   10.983285] ACPI: AC Adapter [ACAD] (on-line)
[   11.020212] ACPI: Battery Slot [BAT1] (battery present)
[   11.395740] microcode: CPU0 sig=0x683, pf=0x20, revision=0x7
[   11.583579] yenta_cardbus 0000:00:0c.0: CardBus bridge found [104d:8094]
[   11.713076] yenta_cardbus 0000:00:0c.0: ISA IRQ mask 0x0cb8, PCI irq 9
[   11.713099] yenta_cardbus 0000:00:0c.0: Socket status: 30000a20
[   11.836393] piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x1040, revision 0
[   12.330265] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   12.608082] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[   12.608150] pci 0000:02:00.0: [168c:001d] type 00 class 0x020000
[   12.608206] pci 0000:02:00.0: reg 10: [mem 0x00000000-0x0000ffff]
[   12.608400] pci 0000:02:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff]
[   12.698534] sony_laptop: Sony Programmable IO Control Driver v0.6
[   12.698562] sony_laptop: detected Type1 model
[   12.699691] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0c/SNY6001:00/input/input3
[   12.700703] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0c/SNY6001:00/input/input4
[   12.704713] sony_laptop: device allocated minor is 58
[   12.712982] sony_laptop: Sony Notebook Control Driver v0.6
[   12.728387] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[    2.988525] ACPI: Invalid Power Resource to register!
[   12.728421]  excluding 0xc0000-0xcbfff 0xdc000-0xdffff 0xe8000-0xfffff
[   12.728561] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   12.728621]  clean.
[   12.728712] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   12.728771]  clean.
[   13.332223] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[   13.357952] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input5
[   13.372933] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6
[   13.686372] cfg80211: Calling CRDA to update world regulatory domain
[   14.268243] ath5k 0000:02:00.0: enabling device (0000 -> 0002)
[   14.268508] ath5k 0000:02:00.0: registered as 'phy0'
[   14.803460] snd_ymfpci 0000:00:09.0: enabling device (0006 -> 0007)
[   14.805659] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[   14.956813] ath: EEPROM regdomain: 0x809c
[   14.956829] ath: EEPROM indicates we should expect a country code
[   14.956841] ath: doing EEPROM country->regdmn map search
[   14.956851] ath: country maps to regdmn code: 0x52
[   14.956862] ath: Country alpha2 being used: CN
[   14.956871] ath: Regpair used: 0x52
[   15.032810] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.034961] ath5k: phy0: Atheros AR2417 chip found (MAC: 0xf0, PHY: 0x70)
[   18.830724] Adding 2013180k swap on /dev/sda1.  Priority:1 extents:1 across:2013180k
[   25.456451] ip_tables: (C) 2000-2006 Netfilter Core Team
[   25.540188] nf_conntrack version 0.5.0 (1920 buckets, 7680 max)
[   25.671338] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   28.698700] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   28.752957] NET: Registered protocol family 17
[   31.211084] wlan0: authenticate with 00:27:19:1d:61:66
[   31.220120] wlan0: send auth to 00:27:19:1d:61:66 (try 1/3)
[   31.221946] wlan0: authenticated
[   31.222402] ath5k 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   31.222423] ath5k 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   31.224124] wlan0: associate with 00:27:19:1d:61:66 (try 1/3)
[   31.226323] wlan0: RX AssocResp from 00:27:19:1d:61:66 (capab=0x431 status=0 aid=2)
[   31.232445] wlan0: associated
[   31.232497] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   32.600181] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
[   36.003761] lp: driver loaded but no devices found
[   36.277690] ppdev: user-space parallel port driver
[   77.084723] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[   77.555264] JFS: nTxBlock = 960, nTxLock = 7681
[ 1407.949841] sd 2:0:0:0: [sdb] Unit Not Ready
[ 1407.949862] sd 2:0:0:0: [sdb]  
[ 1407.949872] Sense Key : Medium Error [current]
[ 1407.949889] sd 2:0:0:0: [sdb]  
[ 1407.949911] Add. Sense: Cannot read medium - unknown format
[ 1408.333738] sd 2:0:0:0: [sdb] READ CAPACITY failed
[ 1408.333763] sd 2:0:0:0: [sdb]  
[ 1408.333773] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1408.333787] sd 2:0:0:0: [sdb]  
[ 1408.333797] Sense Key : Medium Error [current]
[ 1408.333814] sd 2:0:0:0: [sdb]  
[ 1408.333835] Add. Sense: Cannot read medium - unknown format
[ 1408.461736] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1408.589756] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 1408.589783] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1408.717675] sd 2:0:0:0: ioctl_internal_command return code = 8000002
[ 1408.717688]    : Sense Key : Medium Error [current]
[ 1408.717704]    : Add. Sense: Cannot read medium - unknown format
[ 1409.101591] sd 2:0:0:0: [sdb] Unit Not Ready
[ 1409.101614] sd 2:0:0:0: [sdb]  
[ 1409.101624] Sense Key : Medium Error [current]
[ 1409.101641] sd 2:0:0:0: [sdb]  
[ 1409.101662] Add. Sense: Cannot read medium - unknown format
[ 1409.485552] sd 2:0:0:0: [sdb] READ CAPACITY failed
[ 1409.485576] sd 2:0:0:0: [sdb]  
[ 1409.485586] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1409.485600] sd 2:0:0:0: [sdb]  
[ 1409.485609] Sense Key : Medium Error [current]
[ 1409.485626] sd 2:0:0:0: [sdb]  
[ 1409.485647] Add. Sense: Cannot read medium - unknown format
[ 1409.613541] sd 2:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1409.741597] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 1409.741624] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1409.869491] sd 2:0:0:0: ioctl_internal_command return code = 8000002
[ 1409.869506]    : Sense Key : Medium Error [current]
[ 1409.869522]    : Add. Sense: Cannot read medium - unknown format
[ 1410.125451] sd 2:0:0:0: ioctl_internal_command return code = 8000002
[ 1410.125470]    : Sense Key : Medium Error [current]
[ 1410.125487]    : Add. Sense: Cannot read medium - unknown format
[ 1410.253442] sd 2:0:0:0: ioctl_internal_command return code = 8000002
[ 1410.253457]    : Sense Key : Medium Error [current]
[ 1410.253473]    : Add. Sense: Cannot read medium - unknown format
[ 1410.509368] sd 2:0:0:0: ioctl_internal_command return code = 8000002
[ 1410.509384]    : Sense Key : Medium Error [current]
[ 1410.509400]    : Add. Sense: Cannot read medium - unknown format
[ 1410.637400] sd 2:0:0:0: ioctl_internal_command return code = 8000002
[ 1410.637417]    : Sense Key : Medium Error [current]
[ 1410.637433]    : Add. Sense: Cannot read medium - unknown format
[ 1411.021335] sd 2:0:0:0: ioctl_internal_command return code = 8000002
[ 1411.021351]    : Sense Key : Medium Error [current]
[ 1411.021367]    : Add. Sense: Cannot read medium - unknown format
[ 1411.277248] sd 2:0:0:0: ioctl_internal_command return code = 8000002
[ 1411.277264]    : Sense Key : Medium Error [current]
[ 1411.277281]    : Add. Sense: Cannot read medium - unknown format
na komputerze stacjonarnym z livecd antiX z wbudowanym czytnikiem kart działa normalnie wykrywa i montuje

Strony: [1]