Nowe posty

Pokaż wiadomości

Ta sekcja pozwala Ci zobaczyć wszystkie wiadomości wysłane przez tego użytkownika. Zwróć uwagę, że możesz widzieć tylko wiadomości wysłane w działach do których masz aktualnie dostęp.


Wiadomości -

Strony: [1] 2
1
Języki skryptowe / Odp: [perl] fuse
« dnia: 2016-09-10, 09:38:39 »
Witam ponowie
po dluższej przerwie znow wróciłem do tematu. Akturat na python-fuse lepiej dziala. Nie wywala sie przede wszystkim.

Niestety potrzebowałbym malej porady.

Swoj skrypt oparłem na przykladowym pliku hello.py z python-fuse.
No i oczywiscie proboje utworzyc plik przy pomocy "touch test.txt".

Z czego się zrojentowalem to touch najpierw sprawdza czy plik istnieje (tak mysle). W getattr jesli nie znajdzie pliku zwraca -errno.ENOENT.
Niestety w touch dostaje touch: setting times of ‘test.txt’: No such file or directory. Natomiast w logu mam tylko wpisy z getattr.




 def open(self, path, flags):

                os.system("echo 'open "+path+"' >> /tmp/cloud.log")
                for i in self.Arootdir:
                        if(path == i[5] and i[1] == '1'):
                                accmode=os.O_RDONLY | os.O_WRONLY | os.O_RDWR
                                if(flags & accmode) != os.O_RDONLY:
                                        return -errno.EACCES

                return -errno.ENOENT


 def mknode(self, path,mode, dev):
                os.system("echo 'mknode "+path+"' >> /tmp/cloud.log")
                a=['','1','','','',path]
                Arootdir.append(a)

                #fuse.mknode("."+path,mode,dev)
                return st

def read(self, path, size, offset):

                os.system("echo 'read "+path+"' >> /tmp/cloud.log")

                if(path == 'test.txt'):
                        return 0
                return 0


 def getattr(self, path):
                st = MyStat()
        #       if path == '/':
                y=False
                os.system("echo 'getattr "+path+"' >> /tmp/cloud.log")
                for i in self.Arootdir:

                        os.system("echo '"+path+" "+i[1]+" "+i[5]+"' >> /tmp/cloud.log")
                        if(
                        path =='/' or (i[5]==path and (i[1]=='3' or i[1]=='2' or i[1]=='4') )
                        ):
                                y=True
                                st.st_mode = stat.S_IFDIR | 0755
                                st.st_nlink = 2
                                break

                        if(i[5] == path and i[1] == '1'):
                                y=True
                                st.st_mode = stat.S_IFREG | 0666
                                st.st_nlink = 1
                                break

                if(y == False):
                                os.system("echo 'brak "+path+"'  >> /tmp/cloud.log")
                                return -errno.ENOENT
#                               st.st_mode = stat.S_IFREG | 0000
#                               st.st_nlink = 0
#                               a=['','1','','','',path]
#                               self.Arootdir.append(a)

                return st

2
Języki skryptowe / Odp: [perl] fuse
« dnia: 2016-07-06, 07:47:33 »
Spoko dzieki za odpowiedz.
Sprobuje w pythonie.
Tak wlasnie chcialem naskrobac do obslugi mega i google tylko cos uniwersalnego. Co z tego wyniknie zobaczy sie.

3
Języki skryptowe / [perl] fuse
« dnia: 2016-07-04, 13:32:27 »
Witam
Probuje od jakiegos czsus oganąć fuse pod perlem ale jakos nie zabardzo mogę sobie poradzić z dodawaniem nowego pliku.
otóż ma, taki kod
use Fuse::Simple qw(accessor main);
use Data::Dumper;
use threads;
use threads::shared;
use File::ExtAttr ':all';
use IO::File;
use POSIX qw(ENOENT ENOSYS EEXIST EPERM O_RDONLY O_RDWR O_APPEND O_CREAT O_ACCMODE);
use Fcntl qw(S_ISBLK S_ISCHR S_ISFIFO SEEK_SET);
require 'syscall.ph'; # for SYS_mknod and SYS_lchown
my $rootdir="test";

print $rootdir;

  my $var = "this is a variable you can modify. write to me!\n";
  my $filesystem = {
    foo => "this is the contents of a file called foo\n",
    subdir => {
      "foo"  => "this foo is in a subdir called subdir\n",
      "blah" => "this blah is in a subdir called subdir\n",
    },
    "blah" => \ "subdir/blah",        # scalar refs are symlinks
    "magic" => sub { return "42\n" }, # will be called to get value
    "var"  => accessor(\$var),        # read and write this variable
    "var2" => accessor(\$var),        # and the same variable
    "var.b" => accessor(\ my $tmp),   # and an anonymous var
  };



print Dumper $filesystem;
sub x_mknod {
    my ($file, $modes, $dev) = @_;
    $! = 0;
$file=$rootdir.'/'.$file;
    syscall(&SYS_mknod,$file,$modes,$dev);   
return -!$;
}


  main(
    "mountpoint" => "./test",      # actually optional
    "debug"      => 0,           # for debugging Fuse::Simple. optional
    "fuse_debug" => 0,           # for debugging FUSE itself. optional
    "threaded"   => 0,           # optional
    "/"          => $filesystem, # required :-)
    mknod => "main::x_mknod",
  );


i niestety w czasie tworzenia nowego pliku skrypt sie zawiesza.

Mogł by mi ktos podpowiedz co jest nie tak .\

Probuje zrobic program ,ktory montuje chmure (np mega.co.nz) z mozliwoscia zapisywania.

4
Witam
Probuje przerobic rozszezenie na openmp jednak nie zabardzo mi to wychodzi. Tzn pewnie gdzies robie jakis blad z alokacja pamieci tylko nie wiem gdzie.

Mogl bym prosic a jakies wskazówki jak uczynic tą funkcje wielowątkowa. Na tym etapie na razie wyskakuje mi blad ochrony pamieci po kilku petlach.
Zmodyfikowac taka funkcje na openmp
void _som_train(SV* self,IV epochs) {
IV i,X,Y,bx,by,epoch;
NV bd,l,sigma,*n;
AV **org,**veg,*sample;
I32 p,pick,nitems,oitems,vitems,drnd;
MAGIC *mg;
SOM_GENERIC *som;
bool wantarray;
void (*neiguts)(SOM_GENERIC* som,NV sigma,IV X0,IV Y0,NV* n);
dXSARGS;



int R;
if ( !(mg = selfmagic(self)) )
croak("self has no magic!");
som = self2somptr(self,mg);

if ( epochs < 1 )
epochs = 1;

if ( items < 3 )
croak("no data to learn");

oitems = items - 2;
Newx(org,oitems,AV*);
Newx(veg,oitems,AV*);

for ( i=2 ; i if ( SvTYPE(SvRV(ST(i))) != SVt_PVAV )
croak("training item %i is not an array ref", (int)i);
else
org[i-2] = (AV*)SvRV(ST(i));

som->LAMBDA = epochs / log( som->Sigma0 );

X = som->X;
Y = som->Y;

nitems = X*Y;
Newx(n,nitems,NV);

if ( som->type == SOMType_Torus )
neiguts = _torus_neiguts;
else if ( som->type == SOMType_Hexa )
neiguts = _hexa_neiguts;
else if ( som->type == SOMType_Rect )
neiguts = _rect_neiguts;
else
croak("unknown type");

wantarray = GIMME_V == G_ARRAY ? TRUE : FALSE;

/* should this be moved somewhere more global? */
if ( !PL_srand_called ) {
seedDrand01((Rand_seed_t)(time(NULL)+PerlProc_getpid()));
PL_srand_called = TRUE;
}

sp = mark;

int dd=0;
#pragma omp parallel default(shared)
{
#pragma omp for
for ( epoch=1 ; epoch<=epochs ; epoch++ ) {

dd++;
printf("epoch: %d \\n", dd);
som->T = epoch;
sigma = som->Sigma0 * exp(-epoch / som->LAMBDA);
l = som->L0 * exp(-epoch / epochs);

Copy(org,veg,oitems,AV*);
vitems = oitems;

/*
while ( vitems > 0 ) {
*/

for(vitems=oitems; vitems>0; vitems--) {


/*
pick = (I32)(Drand01() * vitems);
*/

drnd = Drand01();
pick = drnd * vitems;

sample = (AV*)veg[pick];

/* optimze me! */
for ( p=pick+1 ; p R=p-1;
veg[R] = veg[p];
}

/*
vitems--;
*/
_bmuguts(som,sample,&bx,&by,&bd);

if ( wantarray ) XPUSHs(newSVnv(bd));

for ( i=0 ; i neiguts(som,sigma,bx,by,n);

_adjustn(som,l,sigma,n,sample);
}

}
}


Safefree(n);
Safefree(org);
Safefree(veg);

PUTBACK;
}
caly kod jest pod tym linkiem http://pastebin.com/UE2JHRuc

5
Bash, skrypty powłoki / [curl] logowanie m.oanda.com
« dnia: 2012-05-30, 11:00:27 »
Witam potrzebuje się dostać poprzez curl do m.oanda.com tylko nie za bardzo wiem gdzie robię błąd. Mógł by mi ktoś podpowiedzieć.

Komunikat ze strony dostaje ze moja przegladarka nie ma wlączonych cookies.

curl -L -b cookie -c cookiejar --user-agent 'Mozilla/5.0 (Windows; U; Windows NT 5.1; pl; rv:1.9.2.16) Gecko/20110319 Firefox/3.6.16 ( .NET CLR 3.5.30729)' -d 'username=mojlogin&password=mojpass' https://m.fxtrade.com/demo-account/login?account=fxgame&app_name=FXMobile&next=%2Fpractice%2Ftrade%2Fnew%3Fs%3DEUR%2FUSD%26p%3DS

6
Języki skryptowe / nginx lua
« dnia: 2010-12-07, 10:38:59 »
ostatnio zainteresowalem sie fastcgi i tym niby szybkim jezykiem skryprowam - tylko mam narazie nie mile problemy. nginx co praweda laczy sie z fastcgi tylko nie wiem dlaczego wywala mi blad a mianowicie
There was an error in the specified application. The full error message follows:

/usr/share/lua/5.1/wsapi/ringer.lua:115: /usr/local/share/lua/5.1//wsapi/common.lua:122: not a valid WSAPI application
stack traceback:
[C]: in function 'error'
/usr/local/share/lua/5.1//wsapi/common.lua:122: in function
(tail call): ?
[string "  if (select(2,...)) then..."]:62: in main chunk
stack traceback:
[C]: in function 'assert'
/usr/share/lua/5.1/wsapi/ringer.lua:115: in function
(tail call): ?
/usr/share/lua/5.1/wsapi/common.lua:353: in function 'load_wsapi_isolated'
/usr/bin/wsapi.fcgi:16: in function
(tail call): ?
[C]: in function 'xpcall'
/usr/share/lua/5.1/wsapi/common.lua:147: in function 'run_app'
/usr/share/lua/5.1/wsapi/common.lua:171: in function 'run'
/usr/share/lua/5.1/wsapi/fastcgi.lua:38: in function 'run'
/usr/bin/wsapi.fcgi:21: in main chunk
[C]: ?
czy komus udalo sie to uruchomic

7
Konfiguracja / przekierowanie polaczenia na proxy
« dnia: 2010-08-17, 13:43:35 »
Witam
wie ktos moze jak dowolny program przepchnac przez server proxy (np polipo)

probowalem przez iptables ale chyba cos robie zle.
wpisalem taka regulke iptables -t nat -A OUTPUT -p tcp -dport 80 -j DNAT --to-destination mojeip:8118

a moze jest jakis programik ktory kieruje polaczenie na ustawione proxy. (taki wraper czy cos)

8
PHP, *SQL / [XML] xpath prosze o pomoc
« dnia: 2010-06-19, 10:53:52 »
Jest sobie taki plik xml




i za zadne skarby nie moge zastowac sumy z tych rekordow.
Probowalem przez simplexml::xpath(sum(records/@amount)); i wychodzi pusta tablica.
wie ktos jak przez simplexml sumowac wartosci atrybutow przy pomocy xpath.

9
Karty graficzne / pomocy instalacja redeon 5470
« dnia: 2010-04-01, 12:45:13 »
witam od tygodnia mam laptopa acer aspire 7740g w ktorym jest karta graficzna radeon 5470 i nie moge uruchomic sterownika do niej.

sciagnalem ze strony ati sterownik 10.3. malo ze mialem problemy z kompilacja tego drivera ale jakos sie udalo. znalazlem patch do jadra 2.6.33.
Po uruchomieniu X monitor gasnie i tyle. trzeba zrestartowac kompa bo nie da sie nic zrobic.

log X to :
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/zenwalk:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.0 Slackware Linux Project
Current Operating System: Linux zenwalk 2.6.33.1 #1 SMP PREEMPT Tue Mar 30 19:26:50 CEST 2010 i686
Build Date: 03 August 2009  06:51:50PM
 
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr  1 12:21:54 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Zenwalk" (0)
(**) |   |-->Monitor "Monitor1"
(**) Option "ReducedBlanking"
(**) |   |-->Device "Videocard1"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Pad1"
(**) |-->Input Device "Keyboard1"
(**) Option "DontZap" "off"
(**) Option "AllowEmptyInput" "false"
(**) Option "AutoAddDevices" "false"
(**) Option "AutoEnableDevices" "false"
(**) Not automatically adding devices
(**) Not automatically enabling devices
(WW) The directory "/usr/share/fonts/local" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/local" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi/:unscaled,
/usr/share/fonts/100dpi/:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi,
/usr/share/fonts/cyrillic,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi/:unscaled,
/usr/share/fonts/100dpi/:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi,
/usr/share/fonts/cyrillic,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Loader magic: 0x1de0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 4

(--) PCI:*(0:2:0:0) 1002:68e0:1025:0347 rev 0, Mem @ 0xd0000000/268435456, 0xcfee0000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[36] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[37] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[38] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[39] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.4.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.71.4
Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.71.4
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) ATI Proprietary Linux Driver Version Identifier:8.71.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.712                                
(II) ATI Proprietary Linux Driver Build Date: Mar  2 2010 22:16:11
(II) Primary Device is: PCI 02@00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Assigning device section with no busID to primary device
(--) Chipset Supported AMD Graphics Processor (0x68E0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
(II) AMD Video driver is running on a device generally supported by this driver
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[36] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[37] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[38] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[39] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) fglrx(0): pEnt->device->identifier=0x81f3350
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[29] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[30] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[32] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[33] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[34] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[35] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[36] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[37] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[38] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[39] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[40] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[41] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[42] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[43] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[44] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[45] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[46] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
ukiDynamicMajor: found major device number 253
ukiDynamicMajor: found major device number 253
ukiOpenByBusid: Searching for BusID PCI:2:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 11, (OK)
ukiOpenByBusid: ukiOpenMinor returns 11
ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
(--) fglrx(0): Chipset: "ATI Mobility Radeon HD 5000 Series" (Chipset = 0x68e0)
(--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x0347)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xcfee0000
(--) fglrx(0): I/O port at 0x00002000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 12.16
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: PARK
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 2:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
(II) fglrx(0): Interrupt handler installed at IRQ 29.
(II) fglrx(0): IRQ 29 Enabled.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Finished Initialize PPLIB!
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display0: LCD on internal LVDS [lvds]
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SEC  Model: 3051  Serial#: 0
(II) fglrx(0): Year: 2008  Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 39  vert.: 23
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.600 redY: 0.340   greenX: 0.310 greenY: 0.560
(II) fglrx(0): blueX: 0.150 blueY: 0.130   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 107.8 MHz   Image Size:  398 x 232 mm
(II) fglrx(0): h_active: 1600  h_sync: 1648  h_sync_end 1680 h_blank_end 1892 h_border: 0
(II) fglrx(0): v_active: 900  v_sync: 902  v_sync_end 908 v_blanking: 950 v_border: 0
(WW) fglrx(0): Unknown vendor-specific block f
(II) fglrx(0):  SAMSUNG
(II) fglrx(0):  173KT01-A01
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff004ca3513000000000
(II) fglrx(0): 00120103802717780a859599574f8f26
(II) fglrx(0): 21505400000001010101010101010101
(II) fglrx(0): 010101010101202a4024618432303020
(II) fglrx(0): 26008ee8100000190000000f00000000
(II) fglrx(0): 00000000001eb4027400000000fe0053
(II) fglrx(0): 414d53554e470a2020202020000000fe
(II) fglrx(0): 003137334b5430312d4130310a2000a4
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): Output LVDS using monitor section Monitor1
(II) fglrx(0): Output DFP1 has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): Output LVDS connected
(II) fglrx(0): Output DFP1 disconnected
(II) fglrx(0): Output CRT1 disconnected
(WW) fglrx(0): Unable to find initial modes
(EE) fglrx(0): Output LVDS enabled but has no modes
(EE) fglrx(0): Display Infrastructure Failed
(EE) fglrx(0): PreInit failed
(II) fglrx(0): === [atiddxPreInit] === end
(II) fglrx(0): IRQ 29 Disabled.
(II) fglrx(0): Interrupt handler Shutdown.
(II) UnloadModule: "fglrx"
(II) UnloadModule: "fb"
(II) Unloading /usr/lib/xorg/modules//libfb.so
(II) UnloadModule: "vbe"
(II) Unloading /usr/lib/xorg/modules//libvbe.so
(II) UnloadModule: "fglrxdrm"
(II) UnloadModule: "vgahw"
(II) Unloading /usr/lib/xorg/modules//libvgahw.so
(II) UnloadModule: "fglrxdrm"
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
at http://wiki.x.org
 for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
moj xorg.conf wyglada tak:

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by videoconfig, the Zenwalk X Configurator.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command from runlevel 3:
# videoconfig


# Files          ( File pathnames )
#_______________________________________________________________________

Section "Files"
ModulePath   "/usr/lib/xorg/modules"
FontPath     "/usr/share/fonts/local"
FontPath     "/usr/share/fonts/TTF"
FontPath     "/usr/share/fonts/OTF"
FontPath     "/usr/share/fonts/Type1"
FontPath     "/usr/share/fonts/misc"
FontPath     "/usr/share/fonts/CID"
FontPath     "/usr/share/fonts/75dpi/:unscaled"
FontPath     "/usr/share/fonts/100dpi/:unscaled"
FontPath     "/usr/share/fonts/75dpi"
FontPath     "/usr/share/fonts/100dpi"
FontPath     "/usr/share/fonts/cyrillic"
EndSection

# ServerFlags    ( Server flags )
#_______________________________________________________________________

Section "ServerFlags"
# Option "NoTrapSignals"
# Option "DontVTSwitch"
Option "DontZap" "off"
# Option "DontZoom"
# Option "DisableVidModeExtension"
# Option "AllowNonLocalXvidtune"
# Option "DisableModInDev"
# Option "AllowNonLocalModInDev"
# Option      "blank time" "10" # 10 minutes
# Option      "standby time" "20"
# Option      "suspend time" "30"
# Option "off time" "60"
# Option "EstimateSizesAggresively" "0"
Option "AutoEnableDevices" "false"
Option "AutoAddDevices" "false"
Option "AllowEmptyInput" "false"
EndSection


# **********************************************************************
# Module section ( Dynamically loadable modules )
#_______________________________________________________________________

Section "Module"
Load  "synaptics"
Load  "dri2"
Load  "dri"
Load  "glx"
Load  "extmod"
Load  "dbe"
EndSection

# Extensions     ( Extension enabling )
#_______________________________________________________________________

Section "Extensions"
        Option "Composite" "enable"
EndSection


# InputDevice    ( Input device description )
#_______________________________________________________________________

Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# Option     "Protocol"      "Xqueue"
# Option     "AutoRepeat"    "500 5"
# Option     "Xleds" "1 2 3"
# Option     "XkbDisable"
Option     "XkbRules"      "xorg"
Option     "XkbModel"      "pc105"
Option     "XkbLayout"     "pl2"
# Option     "XkbVariant"    "us"
Option     "XkbOptions"    "terminate:ctrl_alt_bksp"
EndSection

Section "InputDevice"

# Identifier and driver
Identifier "Mouse1"
Driver     "mouse"
Option     "Protocol" "Auto"
Option     "Device" "/dev/input/mice"
# Option     "Protocol" "Xqueue"
# Option     "BaudRate" "9600"
# Option     "SampleRate" "150"
# Option     "Emulate3Buttons"
# Option     "Emulate3Timeout" "50"
# Option     "ChordMiddle"
Option     "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Identifier    "Pad1"
Driver        "synaptics"
Option           "Protocol" "auto-dev"
Option           "Device" "/dev/tp1"
Option        "LeftEdge"      "1700"
Option        "RightEdge"     "5300"
Option        "TopEdge"       "1700"
Option        "BottomEdge"    "4200"
Option        "FingerLow"     "25"
Option        "FingerHigh"    "30"
Option        "MaxTapTime"    "180"
Option        "MaxTapMove"    "220"
Option        "VertScrollDelta" "100"
Option        "MinSpeed"      "0.39"
Option        "MaxSpeed"      "0.58"
Option        "AccelFactor"   "0.0015"
Option        "SHMConfig"     "on"
Option        "TapButton1" "1"
Option        "TapButton2" "2"
Option        "TapButton3" "3"
EndSection


# Device         ( Graphics device description )
#_______________________________________________________________________

# Any number of graphic devices sections may be present

Section "Device"
Identifier     "Videocard1"
VendorName  "Unknown Vendor"
BoardName   "Video device"
Driver     "vesa"
#BusID      "PCI:2:0:0"
Option "RenderAccel" "true"
#Option "XaaNoOffscreenPixmaps" "on"
#Option  "TexturedVideo" "on"
#Option  "VideoOverlay" "off"
#Option  "Textured2D" "on"
#Option  "TexturedXrender" "off"
#Option  "UseFastTLS" "1"
#Option  "Backstore" "on"
EndSection


# Monitor        ( Monitor description )
#_______________________________________________________________________

Section "Monitor"
Identifier     "Monitor1"
     VendorName "SEC"
     ModelName "SEC:5130"

Modeline "1600x900_59.998" 107.840000 1600 1648 1680 1892 900 902 908 950 -HSync -VSync

     HorizSync 31.5 - 50.0
     VertRefresh 40-90
    Option "UseEdidFreqs" "1"

Option "ReducedBlanking"

EndSection


# Screen         ( Screen configuration )
#_______________________________________________________________________

Section "Screen"
    Identifier  "Zenwalk"
    Device      "Videocard1"
    Monitor     "Monitor1"

   DefaultDepth 24

    Subsection "Display"
        Depth       8
        Modes "1600x900_59.998" "2560x1600" "2048x1536" "1920x1440" "1920x1200" "1920x1080" "1680x1050" "1600x1200" "1600x1024" "1440x900" "1400x1050" "1400x900" "1360x768" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x720" "1200x900" "1152x864" "1152x768" "1024x768" "1024x600" "854x480" "848x480" "800x600"
EndSubsection
    Subsection "Display"
        Depth       16
        Modes "1600x900_59.998" "2560x1600" "2048x1536" "1920x1440" "1920x1200" "1920x1080" "1680x1050" "1600x1200" "1600x1024" "1440x900" "1400x1050" "1400x900" "1360x768" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x720" "1200x900" "1152x864" "1152x768" "1024x768" "1024x600" "854x480" "848x480" "800x600"
EndSubsection
    Subsection "Display"
        Depth       24
        Modes "1600x900_59.998" "2560x1600" "2048x1536" "1920x1440" "1920x1200" "1920x1080" "1680x1050" "1600x1200" "1600x1024" "1440x900" "1400x1050" "1400x900" "1360x768" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x720" "1200x900" "1152x864" "1152x768" "1024x768" "1024x600" "854x480" "848x480" "800x600"
EndSubsection
    Subsection "Display"
        Depth       32
        Modes "1600x900_59.998" "2560x1600" "2048x1536" "1920x1440" "1920x1200" "1920x1080" "1680x1050" "1600x1200" "1600x1024" "1440x900" "1400x1050" "1400x900" "1360x768" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x720" "1200x900" "1152x864" "1152x768" "1024x768" "1024x600" "854x480" "848x480" "800x600"
EndSubsection
EndSection


# ServerLayout   ( Overall layout )
#_______________________________________________________________________

Section "ServerLayout"
Identifier "Simple Layout"
Screen "Zenwalk"
InputDevice "Mouse1" "CorePointer"
InputDevice "Pad1" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection


# DRI            ( DRI-specific configuration )
#_______________________________________________________________________

Section "dri"
# Access to OpenGL ICD is allowed for all users:
    Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
EndSection
natomiast jak wykonuje polecenie aticonfig --initial
aticonfig: No supported adapters detected

prosze o pomoc bo ja juz naprawde nie wiem co z tym zrobic. Wyczerpaly mi sie pomysly.

dodam jeszcze ze system to Zenwalk 6.2 jadro aktualizowane 2.6.33.1

10
witam
mam router asmaxa wszystko bylo pieknie gdyby nie fakt ze za zadne skarby nie chce dzalac przekierowanie portów. o dziwo jest w nim mozliwosc wlaczenia telnetu co daje fizycznie zobaczyc jak wygladaja regulki iptables.

a wygladaja one tak :
iptables -v -L
Chain INPUT (policy ACCEPT 706 packets, 63096 bytes)
 pkts bytes target     prot opt in     out     source               destination        
 1212  159K RAIN       all  --  any    any     anywhere             anywhere            
 1212  159K IPFLTIN    all  --  any    any     anywhere             anywhere            
 1212  159K REIN       all  --  any    any     anywhere             anywhere            
  488 95045 ACCEPT     all  --  ppp_0_0_35_1 any     anywhere             anywhere            state RELATED,ESTABLISHED
    5   240 LOG        tcp  --  ppp_0_0_35_1 any     anywhere             anywhere            tcp flags:SYN,RST,ACK/SYN limit: avg 6/hour burst 5 LOG level alert prefix `Intrusion -> '
   18  1185 DROP       all  --  ppp_0_0_35_1 any     anywhere             anywhere            

Chain FORWARD (policy ACCEPT 4577 packets, 624K bytes)
 pkts bytes target     prot opt in     out     source               destination        
 8825 1569K VSFWD      all  --  any    any     anywhere             anywhere            
 8825 1569K DMZFWD     all  --  any    any     anywhere             anywhere            
 8825 1569K IPFLTINFWD  all  --  any    any     anywhere             anywhere            
 8825 1569K IPFLTOUTFWD  all  --  any    any     anywhere             anywhere            
  855 42708 TCPMSS     tcp  --  any    ppp_0_0_35_1  anywhere             anywhere            tcp flags:SYN,RST/SYN TCPMSS clamp to PMTU
  829 40404 TCPMSS     tcp  --  ppp_0_0_35_1 any     anywhere             anywhere            tcp flags:SYN,RST/SYN TCPMSS clamp to PMTU
 3737  921K ACCEPT     all  --  ppp_0_0_35_1 any     anywhere             anywhere            state RELATED,ESTABLISHED
    0     0 LOG        tcp  --  ppp_0_0_35_1 any     anywhere             anywhere            tcp flags:SYN,RST,ACK/SYN limit: avg 6/hour burst 5 LOG level alert prefix `Intrusion -> '
    0     0 DROP       all  --  ppp_0_0_35_1 any     anywhere             anywhere            

Chain OUTPUT (policy ACCEPT 1183 packets, 168K bytes)
 pkts bytes target     prot opt in     out     source               destination        
    0     0 DROP       all  --  any    ppp_0_0_35_1  anywhere             239.255.255.250    

Chain DMZFWD (1 references)
 pkts bytes target     prot opt in     out     source               destination        

Chain IPFLTIN (1 references)
 pkts bytes target     prot opt in     out     source               destination        

Chain IPFLTINFWD (1 references)
 pkts bytes target     prot opt in     out     source               destination        

Chain IPFLTOUTFWD (1 references)
 pkts bytes target     prot opt in     out     source               destination        
  507 24336 DROP       tcp  --  br0    any     anywhere             anywhere            tcp dpts:8085:65000
    4   220 DROP       udp  --  br0    any     anywhere             anywhere            udp dpts:8085:65000

Chain RAIN (1 references)
 pkts bytes target     prot opt in     out     source               destination        
    0     0 ACCEPT     tcp  --  ppp_0_0_35_1 any     anywhere             anywhere            tcp dpt:www

Chain REIN (1 references)
 pkts bytes target     prot opt in     out     source               destination        

Chain VSFWD (1 references)
 pkts bytes target     prot opt in     out     source               destination        
    0     0 ACCEPT     udp  --  ppp_0_0_35_1 any     anywhere             192.168.1.5         udp dpt:999
    0     0 ACCEPT     tcp  --  ppp_0_0_35_1 any     anywhere             192.168.1.5         tcp dpt:999
>
Nie znam sie az tak bardzo na iptables zwiazku z czym prosze o pomoc - co niest nie tak

11
Inne / zenwalk - instalacja kernela
« dnia: 2009-10-01, 20:21:43 »
chce zaktualizowac kernel i cos jest nie tak. Po zainstalowaniu kernela 2.6.31 z najnowszego zenwalka - uruchomiem jeszcze raz kompa potem dalem depmod -a. Po nastepnym zrestartowaniu byly juz urzadzenia typu karta muzyczna i wifi. Ale niestety urządzenia te dziala jak by z mniejsza mocą tj karta muzyczna ciszej gra. Sygal wifi jest na 22% zamiast 88%(taki byl na starym jajku). Wie ktos moze gdzie ja zrobilem blad. Wczesniej probowalem zainstalowac kernel z zenwalka 2.6.30 i jest taka sama sytuacja.

ps. na kernelu 2.6.28 czy z zenwalka mam tylko jeden problem otoz co jakis czas po uruchomieniu sie kompa nie dziala klwawiatura (zaden klawisz nie raaguje i nie mozna sie zalogowac) touchpad tez nie dziala. Po ponownym uruchomieniu kompa juz jest wszysko oki. Nie rozumiem tego - napoczatku myslalem ze to faktycznie cos jest z klawiatura ale takto w lilo tez by klawaitura sie blokowa a tak nie jest. (nigdy sie nie zablokowala przy lilo). Prosze o pomoc co z tym zrobic

z gory dziekuje za odpowiedz

12
Sieć / zdalne uruchmienie aplikacji z windowsa
« dnia: 2008-08-29, 14:25:31 »
zprawdzalem zdalny pulpit jednak nie zabardzo mi o to chodzilo poniewaz jak sie zdalnie loguje lokalny użytkownik musi być wylogowany. A mnie chodzi bardziej o tym aby można było pracować w tym samym czasie. Wiem ze do tego pewnie jest winodws Server ale myślałem ze jest jakiś sposób to uzyskać na normalnym windowsie ale narazie coś mi to nie wychodzi.

Generalnie sytuacja jest taka  - ze na komputerze "A" jest pewna aplikacja. Przy tym kompie pracuje osoba, która tez używa tez tej aplikacji. Cel jest taki aby można było się połączyć zdalnie sie z tym komputrerem i tez korzysta z tej aplikacji.

13
Sieć / zdalne uruchmienie aplikacji z windowsa
« dnia: 2008-08-27, 14:25:02 »
wiem ze vnc to jest zdalny pulpit jednak czy uruchomi aplikacje na zdalnym komputerze gdzie jest windows i przekaże ten  obraz tej aplikacji do klienta. W ten sposób aby te uruchomienie było praktycznie odczuwalne na zdalnym komputerze.

14
Sieć / zdalne uruchmienie aplikacji z windowsa
« dnia: 2008-08-27, 09:11:39 »
Witam
Jakis czas temu potrzebowalem uruchomic pewna aplikacje linuxowa na windowsie bo Komp kliecki byl potrostu zaslaby. Ale mam teraz pytanie mozna zrobic w odwrotna strone tj. czy mozna windowsowa aplikacje uruchomic i zeby ona byla forwardowana na zdalny komputer. Tak jak to jest ssh X forwarding.

Czy jest wogole to mozliwe - jednak tak se mysle ze jezli jest forawarding na X to moze ssh by moglo wspopracowac (forwarding) z wine

15
Usługi / lighttpd problem z przekazywaniem parametrów GET
« dnia: 2008-04-23, 09:20:13 »
no i doszedlem do rozwiazania - wlasnie phpinfo mi pomoglo. Okazalo ze mialem chyba zle skompilowane php tj. oryginalne z dystrybucji KateOS. Zwiasku z czym skompilowalem php i jako interpreter podalem php-cgi i teraz dziala prawidlowo.

Strony: [1] 2