[ 38.372129] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
[ 38.372475] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[ 38.372819] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[ 38.373162] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[ 38.373511] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[ 38.373781] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[ 38.374122] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[ 38.374463] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 38.374805] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 38.375146] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 38.378641] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 38.378652] pnp: PnP ACPI init
[ 38.384646] pnp: PnP ACPI: found 16 devices
[ 38.384651] PnPBIOS: Disabled by ACPI PNP
[ 38.384705] PCI: Using ACPI for IRQ routing
[ 38.384710] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 38.448352] NET: Registered protocol family 8
[ 38.448354] NET: Registered protocol family 20
[ 38.448951] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[ 38.448955] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[ 38.448958] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[ 38.448961] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[ 38.448964] pnp: 00:00: ioport range 0x4200-0x427f has been reserved
[ 38.448966] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
[ 38.448971] pnp: 00:01: ioport range 0x5000-0x503f has been reserved
[ 38.448974] pnp: 00:01: ioport range 0x5500-0x553f has been reserved
[ 38.449265] PCI: Bridge: 0000:00:08.0
[ 38.449269] IO window: a000-bfff
[ 38.449274] MEM window: e0000000-e1ffffff
[ 38.449278] PREFETCH window: 50000000-500fffff
[ 38.449284] PCI: Bridge: 0000:00:0c.0
[ 38.449286] IO window: c000-cfff
[ 38.449291] MEM window: dc000000-ddffffff
[ 38.449295] PREFETCH window: 50100000-501fffff
[ 38.449300] PCI: Bridge: 0000:00:1e.0
[ 38.449302] IO window: disabled.
[ 38.449306] MEM window: de000000-dfffffff
[ 38.449310] PREFETCH window: d0000000-d7ffffff
[ 38.449322] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 38.449329] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 38.449362] NET: Registered protocol family 2
[ 38.485309] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 38.485524] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 38.486955] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 38.487643] TCP: Hash tables configured (established 131072 bind 65536)
[ 38.487646] TCP reno registered
[ 38.497358] checking if image is initramfs... it is
[ 39.128578] Freeing initrd memory: 7000k freed
[ 39.129091] audit: initializing netlink socket (disabled)
[ 39.129106] audit(1186847278.580:1): initialized
[ 39.129176] highmem bounce pool size: 64 pages
[ 39.129233] VFS: Disk quotas dquot_6.5.1
[ 39.129254] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 39.129308] io scheduler noop registered
[ 39.129311] io scheduler anticipatory registered
[ 39.129313] io scheduler deadline registered
[ 39.129321] io scheduler cfq registered (default)
[ 39.129625] isapnp: Scanning for PnP cards...
[ 39.483767] isapnp: No Plug & Play device found
[ 39.510035] Real Time Clock Driver v1.12ac
[ 39.510096] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 39.510231] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 39.510393] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 39.510955] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 39.511198] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 39.511442] mice: PS/2 mouse device common for all mice
[ 39.512030] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 39.512333] input: Macintosh mouse button emulation as /class/input/input0
[ 39.512368] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 39.512372] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 39.512589] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 39.512592] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 39.768365] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 39.768492] EISA: Probing bus 0 at eisa.0
[ 39.768515] Cannot allocate resource for EISA slot 4
[ 39.768518] Cannot allocate resource for EISA slot 5
[ 39.768534] EISA: Detected 0 cards.
[ 39.798603] TCP cubic registered
[ 39.798609] NET: Registered protocol family 1
[ 39.798630] Using IPI No-Shortcut mode
[ 39.798696] ACPI: (supports S0 S1 S4 S5)
[ 39.798747] Magic number: 3:664:790
[ 39.799302] Freeing unused kernel memory: 328k freed
[ 39.799972] Time: tsc clocksource has been installed.
[ 39.817211] input: AT Translated Set 2 keyboard as /class/input/input1
[ 41.044974] Capability LSM initialized
[ 41.601888] usbcore: registered new interface driver usbfs
[ 41.601914] usbcore: registered new interface driver hub
[ 41.601946] usbcore: registered new device driver usb
[ 41.602687] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 41.603118] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 41.603128] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16
[ 41.603144] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 41.603148] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 41.603309] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 41.603335] ohci_hcd 0000:00:02.0: irq 16, io mem 0xe2087000
[ 41.635752] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
[ 41.680313] usb usb1: configuration #1 chosen from 1 choice
[ 41.680342] hub 1-0:1.0: USB hub found
[ 41.680356] hub 1-0:1.0: 3 ports detected
[ 41.698269] ieee1394: Initialized config rom entry `ip1394'
[ 41.725826] SCSI subsystem initialized
[ 41.731269] libata version 2.20 loaded.
[ 41.782585] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[ 41.782596] ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 17
[ 41.782615] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 41.782619] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 41.782647] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 41.782667] ohci_hcd 0000:00:02.1: irq 17, io mem 0xe2082000
[ 41.840110] usb usb2: configuration #1 chosen from 1 choice
[ 41.840140] hub 2-0:1.0: USB hub found
[ 41.840154] hub 2-0:1.0: 3 ports detected
[ 41.849871] Floppy drive(s): fd0 is 1.44M
[ 41.905469] FDC 0 is a post-1991 82077
[ 41.942512] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[ 41.942524] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 18
[ 41.942537] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 41.942541] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 41.942568] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[ 41.942609] ehci_hcd 0000:00:02.2: debug port 1
[ 41.942614] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 41.942627] ehci_hcd 0000:00:02.2: irq 18, io mem 0xe2083000
[ 41.942635] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 41.942710] usb usb3: configuration #1 chosen from 1 choice
[ 41.942743] hub 3-0:1.0: USB hub found
[ 41.942755] hub 3-0:1.0: 6 ports detected
[ 42.050388] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 42.050394] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16
[ 42.050402] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 42.565674] eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
[ 42.566998] NFORCE2: IDE controller at PCI slot 0000:00:09.0
[ 42.567025] NFORCE2: chipset revision 162
[ 42.567028] NFORCE2: not 100% native mode: will probe irqs later
[ 42.567037] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[ 42.567047] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[ 42.567060] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[ 42.567070] Probing IDE interface ide0...
[ 42.932929] usb 1-1: new full speed USB device using ohci_hcd and address 3
[ 43.136736] Probing IDE interface ide1...
[ 43.147557] usb 1-1: configuration #1 chosen from 1 choice
[ 43.464422] usb 1-2: new low speed USB device using ohci_hcd and address 4
[ 43.659961] usb 1-2: configuration #1 chosen from 1 choice
[ 43.675562] usbcore: registered new interface driver hiddev
[ 43.681108] input: HID 062a:0001 as /class/input/input2
[ 43.681229] input: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:02.0-2
[ 43.681249] usbcore: registered new interface driver usbhid
[ 43.681253] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 44.151888] hdd: HL-DT-STDVD-ROM GDR8161B, ATAPI CD/DVD-ROM drive
[ 44.214686] ide1 at 0x170-0x177,0x376 on irq 15
[ 44.225719] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21
[ 44.225727] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 21 (level, high) -> IRQ 17
[ 44.225734] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 44.277853] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[e2084000-e20847ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 44.285270] sata_sil 0000:01:0b.0: version 2.2
[ 44.285521] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 44.285531] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 19
[ 44.285621] ata1: SATA max UDMA/100 cmd 0xf8852080 ctl 0xf885208a bmdma 0xf8852000 irq 19
[ 44.285656] ata2: SATA max UDMA/100 cmd 0xf88520c0 ctl 0xf88520ca bmdma 0xf8852008 irq 19
[ 44.285672] scsi0 : sata_sil
[ 44.301086] hdd: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
[ 44.301096] Uniform CD-ROM driver Revision: 3.20
[ 44.759216] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 44.771695] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[ 44.771702] ata1.00: ATA-7: SAMSUNG HD160JJ, ZM100-47, max UDMA7
[ 44.771705] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 44.803652] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[ 44.803657] ata1.00: configured for UDMA/100
[ 44.803672] scsi1 : sata_sil
[ 45.114852] ata2: SATA link down (SStatus 0 SControl 310)
[ 45.114974] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD160JJ ZM10 PQ: 0 ANSI: 5
[ 45.115936] ACPI: PCI Interrupt Link [AP3C] enabled at IRQ 20
[ 45.115942] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [AP3C] -> GSI 20 (level, high) -> IRQ 18
[ 45.115950] 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
[ 45.115956] 0000:02:01.0: 3Com PCI 3c920 Tornado at f88c2000.
[ 45.147193] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 45.147210] sda: Write Protect is off
[ 45.147212] sda: Mode Sense: 00 3a 00 00
[ 45.147228] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 45.147292] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 45.147301] sda: Write Protect is off
[ 45.147304] sda: Mode Sense: 00 3a 00 00
[ 45.147318] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 45.147323] sda: sda1 < sda5 sda6 sda7 sda8 sda9 >
[ 45.194196] sd 0:0:0:0: Attached scsi disk sda
[ 45.198878] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 45.393044] ohci1394: fw-host0: SelfID received outside of bus reset sequence
[ 45.531783] Attempting manual resume
[ 45.531788] swsusp: Resume From Partition 8:8
[ 45.531790] PM: Checking swsusp image.
[ 45.532047] PM: Resume from disk failed.
[ 45.547171] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 45.547176] EXT3-fs: write access will be enabled during recovery.
[ 45.662565] ieee1394: Host added: ID:BUS[0-00:1023] GUID[6e56696469610000]
[ 45.849067] kjournald starting. Commit interval 5 seconds
[ 45.849084] EXT3-fs: recovery complete.
[ 45.849408] EXT3-fs: mounted filesystem with ordered data mode.
[ 51.619582] eth0: no link during initialization.
[ 51.640127] eth1: setting half-duplex.
[ 52.914231] NET: Registered protocol family 17
[ 53.453494] Linux agpgart interface v0.102 (c) Dave Jones
[ 53.527522] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 53.527560] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
[ 53.840183] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 53.842505] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 54.379054] agpgart: Detected NVIDIA nForce2 chipset
[ 54.383310] agpgart: AGP aperture is 64M @ 0xd8000000
[ 54.414872] input: PC Speaker as /class/input/input3
[ 54.524272] eth2: register 'cdc_ether' at usb-0000:00:02.0-1, CDC Ethernet Device, 00:0c:e5:9c:ec:f9
[ 54.524287] usbcore: registered new interface driver cdc_ether
[ 54.727011] parport: PnPBIOS parport detected.
[ 54.727075] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 54.753369] Linux video capture interface: v2.00
[ 54.845652] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 54.853187] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 54.853200] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 20
[ 54.853227] saa7134[0]: found at 0000:01:07.0, rev: 1, irq: 20, latency: 32, mmio: 0xe1001000
[ 54.853262] saa7134:
[ 54.853263] saa7134: Congratulations! Your TV card vendor saved a few
[ 54.853264] saa7134: cents for a eeprom, thus your pci board has no
[ 54.853266] saa7134: subsystem ID and I can't identify it automatically
[ 54.853267] saa7134:
[ 54.853268] saa7134: I feel better now. Ok, here are the good news:
[ 54.853270] saa7134: You can use the card= insmod option to specify
[ 54.853271] saa7134: which board do you have. The list:
[ 54.853275] saa7134: card=0 -> UNKNOWN/GENERIC
[ 54.853281] saa7134: card=1 -> Proteus Pro [philips reference design] 1131:2001 1131:2001
[ 54.853286] saa7134: card=2 -> LifeView FlyVIDEO3000 5168:0138 4e42:0138
[ 54.853291] saa7134: card=3 -> LifeView/Typhoon FlyVIDEO2000 5168:0138 4e42:0138
[ 54.853295] saa7134: card=4 -> EMPRESS 1131:6752
[ 54.853330] saa7134: card=5 -> SKNet Monster TV 1131:4e85
[ 54.853334] saa7134: card=6 -> Tevion MD 9717
[ 54.853337] saa7134: card=7 -> KNC One TV-Station RDS / Typhoon TV Tune 1131:fe01 1894:fe01
[ 54.853341] saa7134: card=8 -> Terratec Cinergy 400 TV 153b:1142
[ 54.853345] saa7134: card=9 -> Medion 5044
[ 54.853348] saa7134: card=10 -> Kworld/KuroutoShikou SAA7130-TVPCI
[ 54.853351] saa7134: card=11 -> Terratec Cinergy 600 TV 153b:1143
[ 54.853354] saa7134: card=12 -> Medion 7134 16be:0003
[ 54.853358] saa7134: card=13 -> Typhoon TV+Radio 90031
[ 54.853361] saa7134: card=14 -> ELSA EX-VISION 300TV 1048:226b
[ 54.853364] saa7134: card=15 -> ELSA EX-VISION 500TV 1048:226a
[ 54.853368] saa7134: card=16 -> ASUS TV-FM 7134 1043:4842 1043:4830 1043:4840
[ 54.853373] saa7134: card=17 -> AOPEN VA1000 POWER 1131:7133
[ 54.853377] saa7134: card=18 -> BMK MPEX No Tuner
[ 54.853380] saa7134: card=19 -> Compro VideoMate TV 185b:c100
[ 54.853383] saa7134: card=20 -> Matrox CronosPlus 102b:48d0
[ 54.853387] saa7134: card=21 -> 10MOONS PCI TV CAPTURE CARD 1131:2001
[ 54.853391] saa7134: card=22 -> AverMedia M156 / Medion 2819 1461:a70b
[ 54.853395] saa7134: card=23 -> BMK MPEX Tuner
[ 54.853397] saa7134: card=24 -> KNC One TV-Station DVR 1894:a006
[ 54.853401] saa7134: card=25 -> ASUS TV-FM 7133 1043:4843
[ 54.853405] saa7134: card=26 -> Pinnacle PCTV Stereo (saa7134) 11bd:002b
[ 54.853409] saa7134: card=27 -> Manli MuchTV M-TV002/Behold TV 403 FM
[ 54.853412] saa7134: card=28 -> Manli MuchTV M-TV001/Behold TV 401
[ 54.853414] saa7134: card=29 -> Nagase Sangyo TransGear 3000TV 1461:050c
[ 54.853418] saa7134: card=30 -> Elitegroup ECS TVP3XP FM1216 Tuner Card( 1019:4cb4
[ 54.853422] saa7134: card=31 -> Elitegroup ECS TVP3XP FM1236 Tuner Card 1019:4cb5
[ 54.853426] saa7134: card=32 -> AVACS SmartTV
[ 54.853428] saa7134: card=33 -> AVerMedia DVD EZMaker 1461:10ff
[ 54.853432] saa7134: card=34 -> Noval Prime TV 7133
[ 54.853435] saa7134: card=35 -> AverMedia AverTV Studio 305 1461:2115
[ 54.853439] saa7134: card=36 -> UPMOST PURPLE TV 12ab:0800
[ 54.853442] saa7134: card=37 -> Items MuchTV Plus / IT-005
[ 54.853445] saa7134: card=38 -> Terratec Cinergy 200 TV 153b:1152
[ 54.853449] saa7134: card=39 -> LifeView FlyTV Platinum Mini 5168:0212 4e42:0212
[ 54.853453] saa7134: card=40 -> Compro VideoMate TV PVR/FM 185b:c100
[ 54.853457] saa7134: card=41 -> Compro VideoMate TV Gold+ 185b:c100
[ 54.853461] saa7134: card=42 -> Sabrent SBT-TVFM (saa7130)
[ 54.853473] saa7134: card=43 -> :Zolid Xpert TV7134
[ 54.853476] saa7134: card=44 -> Empire PCI TV-Radio LE
[ 54.853479] saa7134: card=45 -> Avermedia AVerTV Studio 307 1461:9715
[ 54.853482] saa7134: card=46 -> AVerMedia Cardbus TV/Radio (E500) 1461:d6ee
[ 54.853486] saa7134: card=47 -> Terratec Cinergy 400 mobile 153b:1162
[ 54.853490] saa7134: card=48 -> Terratec Cinergy 600 TV MK3 153b:1158
[ 54.853493] saa7134: card=49 -> Compro VideoMate Gold+ Pal 185b:c200
[ 54.853497] saa7134: card=50 -> Pinnacle PCTV 300i DVB-T + PAL 11bd:002d
[ 54.853501] saa7134: card=51 -> ProVideo PV952 1540:9524
[ 54.853504] saa7134: card=52 -> AverMedia AverTV/305 1461:2108
[ 54.853508] saa7134: card=53 -> ASUS TV-FM 7135 1043:4845
[ 54.853512] saa7134: card=54 -> LifeView FlyTV Platinum FM / Gold 5168:0214 1489:0214 5168:0304
[ 54.853517] saa7134: card=55 -> LifeView FlyDVB-T DUO 5168:0306
[ 54.853520] saa7134: card=56 -> Avermedia AVerTV 307 1461:a70a
[ 54.853524] saa7134: card=57 -> Avermedia AVerTV GO 007 FM 1461:f31f
[ 54.853528] saa7134: card=58 -> ADS Tech Instant TV (saa7135) 1421:0350 1421:0351 1421:0370 1421:1370
[ 54.853533] saa7134: card=59 -> Kworld/Tevion V-Stream Xpert TV PVR7134
[ 54.853536] saa7134: card=60 -> LifeView/Typhoon/Genius FlyDVB-T Duo Car 5168:0502 4e42:0502 1489:0502
[ 54.853541] saa7134: card=61 -> Philips TOUGH DVB-T reference design 1131:2004
[ 54.853545] saa7134: card=62 -> Compro VideoMate TV Gold+II
[ 54.853548] saa7134: card=63 -> Kworld Xpert TV PVR7134
[ 54.853551] saa7134: card=64 -> FlyTV mini Asus Digimatrix 1043:0210
[ 54.853555] saa7134: card=65 -> V-Stream Studio TV Terminator
[ 54.853558] saa7134: card=66 -> Yuan TUN-900 (saa7135)
[ 54.853560] saa7134: card=67 -> Beholder BeholdTV 409 FM 0000:4091
[ 54.853564] saa7134: card=68 -> GoTView 7135 PCI 5456:7135
[ 54.853568] saa7134: card=69 -> Philips EUROPA V3 reference design 1131:2004
[ 54.853571] saa7134: card=70 -> Compro Videomate DVB-T300 185b:c900
[ 54.853575] saa7134: card=71 -> Compro Videomate DVB-T200 185b:c901
[ 54.853579] saa7134: card=72 -> RTD Embedded Technologies VFG7350 1435:7350
[ 54.853582] saa7134: card=73 -> RTD Embedded Technologies VFG7330 1435:7330
[ 54.853586] saa7134: card=74 -> LifeView FlyTV Platinum Mini2 14c0:1212
[ 54.853596] saa7134: card=75 -> AVerMedia AVerTVHD MCE A180 1461:1044
[ 54.853600] saa7134: card=76 -> SKNet MonsterTV Mobile 1131:4ee9
[ 54.853604] saa7134: card=77 -> Pinnacle PCTV 40i/50i/110i (saa7133) 11bd:002e
[ 54.853607] saa7134: card=78 -> ASUSTeK P7131 Dual 1043:4862 1043:4876
[ 54.853612] saa7134: card=79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO
[ 54.853615] saa7134: card=80 -> ASUS Digimatrix TV 1043:0210
[ 54.853618] saa7134: card=81 -> Philips Tiger reference design 1131:2018
[ 54.853622] saa7134: card=82 -> MSI TV@Anywhere plus 1462:6231
[ 54.853626] saa7134: card=83 -> Terratec Cinergy 250 PCI TV 153b:1160
[ 54.853629] saa7134: card=84 -> LifeView FlyDVB Trio 5168:0319
[ 54.853633] saa7134: card=85 -> AverTV DVB-T 777 1461:2c05 1461:2c05
[ 54.853638] saa7134: card=86 -> LifeView FlyDVB-T / Genius VideoWonder D 5168:0301 1489:0301
[ 54.853642] saa7134: card=87 -> ADS Instant TV Duo Cardbus PTV331 0331:1421
[ 54.853646] saa7134: card=88 -> Tevion/KWorld DVB-T 220RF 17de:7201
[ 54.853649] saa7134: card=89 -> ELSA EX-VISION 700TV 1048:226c
[ 54.853653] saa7134: card=90 -> Kworld ATSC110 17de:7350
[ 54.853657] saa7134: card=91 -> AVerMedia A169 B 1461:7360
[ 54.853660] saa7134: card=92 -> AVerMedia A169 B1 1461:6360
[ 54.853664] saa7134: card=93 -> Medion 7134 Bridge #2 16be:0005
[ 54.853668] saa7134: card=94 -> LifeView FlyDVB-T Hybrid Cardbus 5168:3306 5168:3502
[ 54.853672] saa7134: card=95 -> LifeView FlyVIDEO3000 (NTSC) 5169:0138
[ 54.853676] saa7134: card=96 -> Medion Md8800 Quadro 16be:0007 16be:0008
[ 54.853680] saa7134: card=97 -> LifeView FlyDVB-S /Acorp TV134DS 5168:0300 4e42:0300
[ 54.853685] saa7134: card=98 -> Proteus Pro 2309 0919:2003
[ 54.853688] saa7134: card=99 -> AVerMedia TV Hybrid A16AR 1461:2c00
[ 54.853692] saa7134: card=100 -> Asus Europa2 OEM 1043:4860
[ 54.853696] saa7134: card=101 -> Pinnacle PCTV 310i 11bd:002f
[ 54.853699] saa7134: card=102 -> Avermedia AVerTV Studio 507 1461:9715
[ 54.853703] saa7134: card=103 -> Compro Videomate DVB-T200A
[ 54.853706] saa7134: card=104 -> Hauppauge WinTV-HVR1110 DVB-T/Hybrid 0070:6701
[ 54.853710] saa7134: card=105 -> Terratec Cinergy HT PCMCIA 153b:1172
[ 54.853714] saa7134[0]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,autodetected]
[ 54.904444] saa7134[0]: board init: gpio is 80407f
[ 55.013995] saa7134[0]: Huh, no eeprom present (err=-5)?
[ 55.014078] saa7134[0]: registered device video0 [v4l2]
[ 55.014111] saa7134[0]: registered device vbi0
[ 55.065121] saa7134 ALSA driver for DMA sound loaded
[ 55.065603] saa7134[0]/alsa: saa7134[0] at 0xe1001000 irq 20 registered as card -2
[ 55.097554] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 55.097561] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) -> IRQ 16
[ 55.097593] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 55.424915] intel8x0_measure_ac97_clock: measured 56808 usecs
[ 55.424920] intel8x0: clocking to 48000
[ 55.600444] fuse init (API version 7.8)
[ 55.618779] lp0: using parport0 (interrupt-driven).
[ 55.666978] Adding 497972k swap on /dev/disk/by-uuid/a69a8200-d533-4526-8763-a68add1a502e. Priority:-1 extents:1 across:497972k
[ 55.800435] EXT3 FS on sda7, internal journal
[ 56.074396] kjournald starting. Commit interval 5 seconds
[ 56.074552] EXT3 FS on sda9, internal journal
[ 56.074557] EXT3-fs: mounted filesystem with ordered data mode.
[ 56.108181] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 56.182335] NTFS volume version 3.1.
[ 56.225635] NTFS volume version 3.1.
[ 57.100168] NET: Registered protocol family 10
[ 57.100276] lo: Disabled Privacy Extensions
[ 57.100344] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 57.100346] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 59.041049] No dock devices found.
[ 59.076767] ibm_acpi: ec object not found
[ 59.135777] Using specific hotkey driver
[ 59.296773] input: Power Button (FF) as /class/input/input4
[ 59.301201] ACPI: Power Button (FF) [PWRF]
[ 59.336132] input: Power Button (CM) as /class/input/input5
[ 59.340534] ACPI: Power Button (CM) [PWRB]
[ 59.375137] pcc_acpi: loading...
[ 64.909362] ppdev: user-space parallel port driver
[ 65.423174] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 65.423180] apm: overridden by ACPI.
[ 65.615176] Bluetooth: Core ver 2.11
[ 65.615842] NET: Registered protocol family 31
[ 65.615845] Bluetooth: HCI device and connection manager initialized
[ 65.615850] Bluetooth: HCI socket layer initialized
[ 65.656124] Bluetooth: L2CAP ver 2.8
[ 65.656129] Bluetooth: L2CAP socket layer initialized
[ 65.752609] Bluetooth: RFCOMM socket layer initialized
[ 65.752887] Bluetooth: RFCOMM TTY layer initialized
[ 65.752890] Bluetooth: RFCOMM ver 1.8
[ 78.810287] eth2: no IPv6 routers present
Chyba nie ma błedu ale może cos z teg wyczytasz ?