Nowe posty

xx Dystrybucja pod HP Omen (6)
Wczoraj o 23:30:08
xx [Poradnik] Wyszukiwanie Sterowników (2)
Wczoraj o 21:08:23
lamp Problem z Linux Lite po instalacji (0)
Wczoraj o 19:50:30
xx Ile pingwinów? (1)
Wczoraj o 08:59:24
xx konfiguracja pale moon (0)
2024-03-24, 21:53:42
xx Plasma 6 w Neonie ssie trochę mniej ... (10)
2024-03-23, 02:38:11
xx problem z instalacja sterowników do karty sieciowej (3)
2024-03-18, 18:10:16
xx Plik abc.001 (1)
2024-03-17, 17:48:27
xx Zlecę dopracowanie programu w MatLab (0)
2024-03-13, 15:28:40
xx Linux Mint 21.3 XFCE brak dźwieku po paru minutach (karta muzyczna zintegrowana) (5)
2024-03-12, 23:07:01

Autor Wątek: Jak włączyć X-y?  (Przeczytany 8879 razy)

vegetka

  • Gość
Jak włączyć X-y?
« dnia: 2005-08-12, 07:42:16 »
ściągnąłem szczęśliwy w/w dystrybucję, ale nijak nie mogę ustawić rozdzielczości ekranu. pracuję na 640x480 w dobrych kolorach. przeczytałem całe forum, próbowałem wszystkiego i nic. posiadam monitor Hyundai DS 14S + grafikę zintegrowaną VIA/S3G UniChrome IGP. nie ma też polskich trzcionek. . .

zajacraf

  • Gość
Jak włączyć X-y?
« Odpowiedź #1 dnia: 2005-08-12, 08:17:26 »
2005-08-12 07:42:16 vegetka napisał:

> ściągnąłem szczęśliwy w/w dystrybucję, ale nijak nie mogę ustawić rozdzielczości ekranu. pracuję
 > na 640x480 w dobrych kolorach. przeczytałem całe forum, próbowałem wszystkiego i nic. posiadam
 > monitor Hyundai DS 14S + grafikę zintegrowaną VIA/S3G UniChrome IGP. nie ma też polskich
 > trzcionek. . .
-----------------
polski czcionki http://dug.net.pl/faq/index.php?kat=7&PHPSESSID=7ed0a28cfb784905f91e4a3ae0afe01c
co do rozdzielczośc:
/etc/X11/XF86Config - o tym poszukaj

vegetka

  • Gość
Jak włączyć X-y?
« Odpowiedź #2 dnia: 2005-08-12, 10:19:59 »
xf86config wyedytowałem, ale jest to samo. narazie poszperam na podanej stronce [thnx]. jak się nie uda, to wrócę. thnx

difrost

  • Gość
Jak włączyć X-y?
« Odpowiedź #3 dnia: 2005-08-12, 11:26:51 »
2005-08-12 10:19:59 vegetka napisał:

> xf86config wyedytowałem, ale jest to samo. narazie poszperam na podanej stronce [thnx]. jak się
 > nie uda, to wrócę. thnx

Musisz podac dokladne wartosci odswierzania monitora! Jesli tego nie podasz XServer nie bedzie w stanie wlaczyc wiekszej rodzielczosci. Dopisz odpowiedni dla twojego monitora HorizSync i VertRefresh w Section \\"Monitor\\".

Xax79

  • Gość
Jak włączyć X-y?
« Odpowiedź #4 dnia: 2005-08-12, 12:54:02 »
Jezeli nadal nie dziala, wklej tutaj loga X\\'ow.
U mnie jest to  /var/log/Xorg.0.log.

vegetka

  • Gość
Jak włączyć X-y?
« Odpowiedź #5 dnia: 2005-08-12, 20:26:08 »
ojej. ja nie wiem, czy mogę. mam nadzieję, że nikt mnie za to nie zabije. plik nazywa się. XFree86.0.log i wygląda tak:
--------------------------------------------------
XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-14 20050601051219 fabbione@fabbione.net)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.29-pre2 i686 [ELF]
Build Date: 01 June 2005

This version of XFree86 has been extensively modified by the Debian
Project, and is not supported by the XFree86 Project, Inc., in any
way.  Bugs should be reported to the Debian Bug Tracking System; see
http://www.debian.org/Bugs/Reporting >.

We strongly encourage the use of the \\"reportbug\\" package and command
to ensure that bug reports contain as much useful information as
possible.

Before filing a bug report, you may want to consult the Debian X FAQ:
       XHTML version: file:///usr/share/doc/xfree86-common/FAQ.xhtml
  plain text version: file:///usr/share/doc/xfree86-common/FAQ.gz

Module Loader present
OS Kernel: Linux version 2.4.27-2-386 (horms@tabatha.lab.ultramonkey.org) (gcc version 3.3.5 (Debian 1:3.3.5-12)) #1 Mon May 16 16:47:51 JST 2005
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: \\"/var/log/XFree86.0.log\\", Time: Fri Aug 12 20:02:10 2005
(==) Using config file: \\"/etc/X11/XF86Config-4\\"
(==) ServerLayout \\"Default Layout\\"
(**) |-->Screen \\"Default Screen\\" (0)
(**) |   |-->Monitor \\"Hyundai DeluxScan 14S\\"
(**) |   |-->Device \\"Generic Video Card\\"
(**) |-->Input Device \\"Generic Keyboard\\"
(**) Option \\"XkbRules\\" \\"xfree86\\"
(**) XKB: rules: \\"xfree86\\"
(**) Option \\"XkbModel\\" \\"pc104\\"
(**) XKB: model: \\"pc104\\"
(**) Option \\"XkbLayout\\" \\"pl\\"
(**) XKB: layout: \\"pl\\"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device \\"Configured Mouse\\"
(**) |-->Input Device \\"Generic Mouse\\"
(WW) The directory \\"/usr/lib/X11/fonts/cyrillic\\" does not exist.
   Entry deleted from font path.
(WW) The directory \\"/usr/lib/X11/fonts/CID\\" does not exist.
   Entry deleted from font path.
(**) FontPath set to \\"unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi\\"
(==) RgbPath set to \\"/usr/X11R6/lib/X11/rgb\\"
(==) ModulePath set to \\"/usr/X11R6/lib/modules\\"
(++) using VT number 7

(II) Open APM successful
(II) Module ABI versions:
   XFree86 ANSI C Emulation: 0.2
   XFree86 Video Driver: 0.6
   XFree86 XInput driver : 0.4
   XFree86 Server Extension : 0.2
   XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: \\"bitmap\\"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor=\\"The XFree86 Project\\"
   compiled for 4.3.0.1, module version = 1.0.0
   Module class: XFree86 Font Renderer
   ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: \\"pcidata\\"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor=\\"The XFree86 Project\\"
   compiled for 4.3.0.1, module version = 1.0.0
   ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000002c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3205 card 1106,3205 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b198 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0f:0: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:4: chip 1106,3104 card 1106,3104 rev 86 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1106,3227 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1462,7061 rev 60 class 04,01,00 hdr 00
(II) PCI: 00:12:0: chip 1106,3065 card 1462,7061 rev 78 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 1106,7205 card 1462,7061 rev 01 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
   
  • -1   0   0x00000000 - 0x0000ffff (0x10000) IX

(II) Bus 0 non-prefetchable memory range:
   
  • -1   0   0x00000000 - 0xffffffff (0x0) MX

(II) Bus 0 prefetchable memory range:
   
  • -1   0   0x00000000 - 0xffffffff (0x0) MX

(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
   
  • -1   0   0xec000000 - 0xedffffff (0x2000000) MX

(II) Bus 1 prefetchable memory range:
   
  • -1   0   0xe8000000 - 0xebffffff (0x4000000) MX

(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) unknown vendor (0x1106) unknown chipset (0x7205) rev 1, Mem @ 0xe8000000/26, 0xec000000/24
(II) Addressable bus resource ranges are
   
  • -1   0   0x00000000 - 0xffffffff (0x0) MX
  • [1] -1   0   0x00000000 - 0x0000ffff (0x10000) IX

(II) OS-reported resource ranges:
   
  • -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
  • [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
   
  • -1   0   0xee001000 - 0xee0010ff (0x100) MX
  • [1] -1   0   0xee000000 - 0xee0000ff (0x100) MX

   [2] -1   0   0xe0000000 - 0xdfffffff (0x0) MXO
   [3] -1   0   0xec000000 - 0xecffffff (0x1000000) MX(B)
   [4] -1   0   0xe8000000 - 0xebffffff (0x4000000) MX(B)
   [5] -1   0   0x0000e600 - 0x0000e6ff (0x100) IX
   [6] -1   0   0x0000e500 - 0x0000e5ff (0x100) IX
   [7] -1   0   0x0000e400 - 0x0000e41f (0x20) IX
   [8] -1   0   0x0000e300 - 0x0000e31f (0x20) IX
   [9] -1   0   0x0000e200 - 0x0000e21f (0x20) IX
   [10] -1   0   0x0000e100 - 0x0000e11f (0x20) IX
   [11] -1   0   0x0000e000 - 0x0000e00f (0x10) IX
(II) Active PCI resource ranges after removing overlaps:
   
  • -1   0   0xee001000 - 0xee0010ff (0x100) MX
  • [1] -1   0   0xee000000 - 0xee0000ff (0x100) MX

   [2] -1   0   0xe0000000 - 0xdfffffff (0x0) MXO
   [3] -1   0   0xec000000 - 0xecffffff (0x1000000) MX(B)
   [4] -1   0   0xe8000000 - 0xebffffff (0x4000000) MX(B)
   [5] -1   0   0x0000e600 - 0x0000e6ff (0x100) IX
   [6] -1   0   0x0000e500 - 0x0000e5ff (0x100) IX
   [7] -1   0   0x0000e400 - 0x0000e41f (0x20) IX
   [8] -1   0   0x0000e300 - 0x0000e31f (0x20) IX
   [9] -1   0   0x0000e200 - 0x0000e21f (0x20) IX
   [10] -1   0   0x0000e100 - 0x0000e11f (0x20) IX
   [11] -1   0   0x0000e000 - 0x0000e00f (0x10) IX
(II) OS-reported resource ranges after removing overlaps with PCI:
   
  • -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
  • [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX
(II) All system resource ranges:
   
  • -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
  • [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0   0xee001000 - 0xee0010ff (0x100) MX
   [6] -1   0   0xee000000 - 0xee0000ff (0x100) MX
   [7] -1   0   0xe0000000 - 0xdfffffff (0x0) MXO
   [8] -1   0   0xec000000 - 0xecffffff (0x1000000) MX(B)
   [9] -1   0   0xe8000000 - 0xebffffff (0x4000000) MX(B)
   [10] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [11] -1   0   0x00000000 - 0x000000ff (0x100) IX
   [12] -1   0   0x0000e600 - 0x0000e6ff (0x100) IX
   [13] -1   0   0x0000e500 - 0x0000e5ff (0x100) IX
   [14] -1   0   0x0000e400 - 0x0000e41f (0x20) IX
   [15] -1   0   0x0000e300 - 0x0000e31f (0x20) IX
   [16] -1   0   0x0000e200 - 0x0000e21f (0x20) IX
   [17] -1   0   0x0000e100 - 0x0000e11f (0x20) IX
   [18] -1   0   0x0000e000 - 0x0000e00f (0x10) IX
(II) LoadModule: \\"GLcore\\"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping \\"/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o\\":  No symbols found
Skipping \\"/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o\\":  No symbols found
Skipping \\"/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o\\":  No symbols found
Skipping \\"/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o\\":  No symbols found
(II) Module GLcore: vendor=\\"The XFree86 Project\\"
   compiled for 4.3.0.1, module version = 1.0.0
   ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: \\"bitmap\\"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: \\"dbe\\"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor=\\"The XFree86 Project\\"
   compiled for 4.3.0.1, module version = 1.0.0
   Module class: XFree86 Server Extension
   ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: \\"ddc\\"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor=\\"The XFree86 Project\\"
   compiled for 4.3.0.1, module version = 1.0.0
   ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: \\"dri\\"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor=\\"The XFree86 Project\\"
   compiled for 4.3.0.1, module version = 1.0.0
   ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module \\"drm\\"
(II) LoadModule: \\"drm\\"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor=\\"The XFree86 Project\\"
   compiled for 4.3.0.1, module version = 1.0.0
   ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: \\"extmod\\"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor=\\"The XFree86 Project\\"
   compiled for 4.3.0.1, module version = 1.0.0
   Module class: XFree86 Server Extension
   ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: \\"freetype\\"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor=\\"The XFree86 Project\\"
   compiled for 4.3.0.1, module version = 2.0.2
   Module class: XFree86 Font Renderer
   ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: \\"glx\\"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor=\\"The XFree86 Project\\"
   compiled for 4.3.0.1, module version = 1.0.0
   ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module \\"GLcore\\"
(II) LoadModule: \\"GLcore\\"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: \\"int10\\"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor=\\"The XFree86 Project\\"
   compiled for 4.3.0.1, module version = 1.0.0
   ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: \\"record\\"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor=\\"The XFree86 Project\\"
   compiled for 4.3.0.1, module version = 1.13.0
   Module class: XFree86 Server Extension
   ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: \\"speedo\\"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping \\"/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o\\":  No symbols found
(II) Module speedo: vendor=\\"The XFree86 Project\\"
   compiled for 4.3.0.1, module version = 1.0.1
   Module class: XFree86 Font Renderer
   ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: \\"type1\\"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor=\\"The XFree86 Project\\"
   compiled for 4.3.0.1, module version = 1.0.2
   Module class: XFree86 Font Renderer
   ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: \\"vbe\\"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor=\\"The XFree86 Project\\"
   compiled for 4.3.0.1, module version = 1.1.0
   ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: \\"xtt\\"
(II) Loading /usr/X11R6/lib/modules/fonts/libxtt.a
(II) Module xtt: vendor=\\"X-TrueType Server Project & After X-TT Project\\"
   compiled for 4.3.0.1, module version = 1.4.1
   Module class: XFree86 Font Renderer
   ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font xtt
(II) LoadModule: \\"via\\"
(II) Loading /usr/X11R6/lib/modules/drivers/via_drv.o
(II) Module via: vendor=\\"The XFree86 Project\\"
   compiled for 4.3.0.1, module version = 4.1.30
   Module class: XFree86 Video Driver
   ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: \\"mouse\\"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor=\\"The XFree86 Project\\"
   compiled for 4.3.0.1, module version = 1.0.0
   Module class: XFree86 XInput Driver
   ABI class: XFree86 XInput driver, version 0.4
(II) via: driver for VIA chipsets: CLE266, KM400, K8M800
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset KM400 found
(II) resource ranges after xf86ClaimFixedResources() call:
   
  • -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
  • [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0   0xee001000 - 0xee0010ff (0x100) MX
   [6] -1   0   0xee000000 - 0xee0000ff (0x100) MX
   [7] -1   0   0xe0000000 - 0xdfffffff (0x0) MXO
   [8] -1   0   0xec000000 - 0xecffffff (0x1000000) MX(B)
   [9] -1   0   0xe8000000 - 0xebffffff (0x4000000) MX(B)
   [10] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [11] -1   0   0x00000000 - 0x000000ff (0x100) IX
   [12] -1   0   0x0000e600 - 0x0000e6ff (0x100) IX
   [13] -1   0   0x0000e500 - 0x0000e5ff (0x100) IX
   [14] -1   0   0x0000e400 - 0x0000e41f (0x20) IX
   [15] -1   0   0x0000e300 - 0x0000e31f (0x20) IX
   [16] -1   0   0x0000e200 - 0x0000e21f (0x20) IX
   [17] -1   0   0x0000e100 - 0x0000e11f (0x20) IX
   [18] -1   0   0x0000e000 - 0x0000e00f (0x10) IX
(II) resource ranges after probing:
   
  • -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
  • [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0   0xee001000 - 0xee0010ff (0x100) MX
   [6] -1   0   0xee000000 - 0xee0000ff (0x100) MX
   [7] -1   0   0xe0000000 - 0xdfffffff (0x0) MXO
   [8] -1   0   0xec000000 - 0xecffffff (0x1000000) MX(B)
   [9] -1   0   0xe8000000 - 0xebffffff (0x4000000) MX(B)
   [10] 0   0   0x000a0000 - 0x000affff (0x10000) MS
   [11] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS
   [12] 0   0   0x000b8000 - 0x000bffff (0x8000) MS
   [13] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [14] -1   0   0x00000000 - 0x000000ff (0x100) IX
   [15] -1   0   0x0000e600 - 0x0000e6ff (0x100) IX
   [16] -1   0   0x0000e500 - 0x0000e5ff (0x100) IX
   [17] -1   0   0x0000e400 - 0x0000e41f (0x20) IX
   [18] -1   0   0x0000e300 - 0x0000e31f (0x20) IX
   [19] -1   0   0x0000e200 - 0x0000e21f (0x20) IX
   [20] -1   0   0x0000e100 - 0x0000e11f (0x20) IX
   [21] -1   0   0x0000e000 - 0x0000e00f (0x10) IX
   [22] 0   0   0x000003b0 - 0x000003bb (0xc) IS
   [23] 0   0   0x000003c0 - 0x000003df (0x20) IS
(II) Setting vga for screen 0.
(II) Loading sub module \\"vgahw\\"
(II) LoadModule: \\"vgahw\\"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor=\\"The XFree86 Project\\"
   compiled for 4.3.0.1, module version = 0.1.0
   ABI class: XFree86 Video Driver, version 0.6
(**) VIA(0): Depth 24, (--) framebuffer bpp 32
(==) VIA(0): RGB weight 888
(==) VIA(0): Default visual is TrueColor
(==) VIA(0): Using HW cursor
(==) VIA(0): Not using video BIOS to set modes
(II) Loading sub module \\"int10\\"
(II) LoadModule: \\"int10\\"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) VIA(0): Primary V_BIOS segment is: 0xc000
(WW) System lacks support for changing MTRRs
(II) Loading sub module \\"vbe\\"
(II) LoadModule: \\"vbe\\"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) VIA(0): VESA BIOS detected
(II) VIA(0): VESA VBE Version 3.0
(II) VIA(0): VESA VBE Total Mem: 65536 kB
(II) VIA(0): VESA VBE OEM: VIA CLE266

(II) VIA(0): VESA VBE OEM Software Rev: 0.0
(--) VIA(0): Chipset: \\"KM400\\"
(--) VIA(0): Chipset Rev.: 132
(II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) VIA(0): mapping MMIO @ 0xec000000 with size 0x9000
(--) VIA(0): mapping BitBlt MMIO @ 0xec200000 with size 0x10000
(II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) VIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) VIA(0): videoram =  65536k
(II) Loading sub module \\"i2c\\"
(II) LoadModule: \\"i2c\\"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor=\\"The XFree86 Project\\"
   compiled for 4.3.0.1, module version = 1.2.0
   ABI class: XFree86 Video Driver, version 0.6
(II) VIA(0): I2C bus \\"I2C bus 1\\" initialized.
(II) VIA(0): I2C bus \\"I2C bus 2\\" initialized.
(II) Loading sub module \\"ddc\\"
(II) LoadModule: \\"ddc\\"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module \\"ddc\\"
(II) LoadModule: \\"ddc\\"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) VIA(0): VESA VBE DDC supported
(II) VIA(0): VESA VBE DDC Level 2
(II) VIA(0): VESA VBE DDC transfer in appr. 1 sec.
(II) VIA(0): VESA VBE DDC read successfully
(II) VIA(0): Manufacturer: HEI  Model: 12f0  Serial#: 13736
(II) VIA(0): Year: 1998  Week: 11
(II) VIA(0): EDID Version: 1.0
(II) VIA(0): Analog Display Input,  Input Voltage Level: 0.714/0.286 V
(II) VIA(0): Sync:  Separate
(II) VIA(0): Max H-Image Size [cm]: horiz.: 26  vert.: 19
(II) VIA(0): Gamma: 1.00
(II) VIA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) VIA(0): redX: 0.625 redY: 0.340   greenX: 0.302 greenY: 0.600
(II) VIA(0): blueX: 0.142 blueY: 0.065   whiteX: 0.281 whiteY: 0.311
(II) VIA(0): Supported VESA Video Modes:
(II) VIA(0): 720x400@70Hz
(II) VIA(0): 640x480@60Hz
(II) VIA(0): 640x480@75Hz
(II) VIA(0): 800x600@60Hz
(II) VIA(0): 800x600@75Hz
(II) VIA(0): 1024x768@87Hz (interlaced)
(II) VIA(0): 1024x768@60Hz
(II) VIA(0): Manufacturer\\'s mask: 0
(WW) VIA(0): Hyundai DeluxScan 14S: Using default hsync range of 28.00-33.00kHz
(WW) VIA(0): Hyundai DeluxScan 14S: using default vrefresh range of 43.00-72.00Hz
(II) VIA(0): Clock range:  20.00 to 230.00 MHz
(II) VIA(0): Not using default mode \\"640x350\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"320x175\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"640x400\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"320x200\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"720x400\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"360x200\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"320x240\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"640x480\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"320x240\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"640x480\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"320x240\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"640x480\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"320x240\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"800x600\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"400x300\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"800x600\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"400x300\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"800x600\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"400x300\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"800x600\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"400x300\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"800x600\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"400x300\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1024x768\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"512x384\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1024x768\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"512x384\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1024x768\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"512x384\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1024x768\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"512x384\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1024x768\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"512x384\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1152x864\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"576x432\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1280x960\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"640x480\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1280x960\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"640x480\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1280x1024\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"640x512\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1280x1024\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"640x512\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1280x1024\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"640x512\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1600x1200\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"800x600\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1600x1200\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"800x600\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1600x1200\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"800x600\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1600x1200\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"800x600\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1600x1200\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"800x600\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1792x1344\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"896x672\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1792x1344\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"896x672\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1856x1392\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"928x696\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1856x1392\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"928x696\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1920x1440\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"960x720\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1920x1440\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"960x720\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"832x624\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"416x312\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1152x768\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"576x384\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1400x1050\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"700x525\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1400x1050\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"700x525\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1600x1024\\" (hsync out of range)
(II) VIA(0): Not using default mode \\"800x512\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1920x1440\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"960x720\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"2048x1536\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1024x768\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"2048x1536\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1024x768\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"2048x1536\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode \\"1024x768\\" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using mode \\"1024x768\\" (no mode of this name)
(II) VIA(0): Not using mode \\"800x600\\" (no mode of this name)
(--) VIA(0): Virtual size is 640x480 (pitch 640)
(**) VIA(0): *Default mode \\"640x480\\": 25.2 MHz (scaled from 0.2 MHz), 31.5 kHz, 60.0 Hz
(II) VIA(0): Modeline \\"640x480\\"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(--) VIA(0): Display dimensions: (260, 190) mm
(--) VIA(0): DPI set to (62, 64)
(II) Loading sub module \\"fb\\"
(II) LoadModule: \\"fb\\"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor=\\"The XFree86 Project\\"
   compiled for 4.3.0.1, module version = 1.0.0
   ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module \\"xaa\\"
(II) LoadModule: \\"xaa\\"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor=\\"The XFree86 Project\\"
   compiled for 4.3.0.1, module version = 1.1.0
   ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module \\"ramdac\\"
(II) LoadModule: \\"ramdac\\"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor=\\"The XFree86 Project\\"
   compiled for 4.3.0.1, module version = 0.1.0
   ABI class: XFree86 Video Driver, version 0.6
(**) VIA(0): Option: Cap0_FieldSwap Disabled
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don\\'t.
(II) resource ranges after preInit:
   
  • 0   0   0xec000000 - 0xecffffff (0x1000000) MS
  • [1] 0   0   0xe8000000 - 0xebffffff (0x4000000) MS

   [2] -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
   [3] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
   [4] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [5] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [6] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [7] -1   0   0xee001000 - 0xee0010ff (0x100) MX
   [8] -1   0   0xee000000 - 0xee0000ff (0x100) MX
   [9] -1   0   0xe0000000 - 0xdfffffff (0x0) MXO
   [10] -1   0   0xec000000 - 0xecffffff (0x1000000) MX(B)
   [11] -1   0   0xe8000000 - 0xebffffff (0x4000000) MX(B)
   [12] 0   0   0x000a0000 - 0x000affff (0x10000) MS
   [13] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS
   [14] 0   0   0x000b8000 - 0x000bffff (0x8000) MS
   [15] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [16] -1   0   0x00000000 - 0x000000ff (0x100) IX
   [17] -1   0   0x0000e600 - 0x0000e6ff (0x100) IX
   [18] -1   0   0x0000e500 - 0x0000e5ff (0x100) IX
   [19] -1   0   0x0000e400 - 0x0000e41f (0x20) IX
   [20] -1   0   0x0000e300 - 0x0000e31f (0x20) IX
   [21] -1   0   0x0000e200 - 0x0000e21f (0x20) IX
   [22] -1   0   0x0000e100 - 0x0000e11f (0x20) IX
   [23] -1   0   0x0000e000 - 0x0000e00f (0x10) IX
   [24] 0   0   0x000003b0 - 0x000003bb (0xc) IS
   [25] 0   0   0x000003c0 - 0x000003df (0x20) IS
(--) VIA(0): mapping framebuffer @ 0xe8000000 with size 0x4000000
(--) VIA(0): Frame buffer start: 0x402cd000, free start: 0x12c000 end: 0x4000000
(--) VIA(0): mapping MMIO @ 0xec000000 with size 0x9000
(--) VIA(0): mapping BitBlt MMIO @ 0xec200000 with size 0x10000
(II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) VIA(0): I2C device \\"I2C bus 2:TV\\" registered at address 0x00.
(II) VIA(0): I2C device \\"I2C bus 2:TV\\" removed.
(II) VIA(0): 3D Engine has been initialized.
(II) VIA(0): VIAInternalScreenInit
(II) VIA(0): Clipping pixmap cache for old DRI/DRM module.
(II) VIA(0): Using XFree86 Acceleration Architecture (XAA)
   Screen to screen bit blits
   Solid filled rectangles
   8x8 mono pattern filled rectangles
   8x8 color pattern filled rectangles
   Screen to Screen color expansion
   Solid Lines
   Dashed Lines
   Image Writes
   Offscreen Pixmaps
   Setting up tile and stipple cache:
      4 128x103 slots
      12 8x8 color pattern slots
(==) VIA(0): Backing store disabled
(**) Option \\"dpms\\"
(**) VIA(0): DPMS enabled
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
[drm] failed to load kernel module \\"via\\"
(II) VIA(0): [drm] drmOpen failed
(EE) VIA(0): [dri] DRIScreenInit failed.  Disabling DRI.
(II) VIA(0): direct rendering disabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard \\"Generic Keyboard\\" handled by legacy driver
(**) Option \\"Protocol\\" \\"ImPS/2\\"
(**) Configured Mouse: Protocol: \\"ImPS/2\\"
(**) Option \\"CorePointer\\"
(**) Configured Mouse: Core Pointer
(**) Option \\"Device\\" \\"/dev/psaux\\"
(**) Option \\"Emulate3Buttons\\" \\"true\\"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option \\"ZAxisMapping\\" \\"4 5\\"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 5
(**) Option \\"Protocol\\" \\"ImPS/2\\"
(**) Generic Mouse: Protocol: \\"ImPS/2\\"
(**) Option \\"SendCoreEvents\\" \\"true\\"
(**) Generic Mouse: always reports core events
(**) Option \\"Device\\" \\"/dev/input/mice\\"
(EE) xf86OpenSerial: Cannot open device /dev/input/mice
   No such device.
(EE) Generic Mouse: cannot open input device
(EE) PreInit failed for input device \\"Generic Mouse\\"
(II) UnloadModule: \\"mouse\\"
(II) XINPUT: Adding extended input device \\"Configured Mouse\\" (type: MOUSE)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for \\".pcf\\" already registered at priority 0
Warning: font renderer for \\".pcf.Z\\" already registered at priority 0
Warning: font renderer for \\".pcf.gz\\" already registered at priority 0
Warning: font renderer for \\".snf\\" already registered at priority 0
Warning: font renderer for \\".snf.Z\\" already registered at priority 0
Warning: font renderer for \\".snf.gz\\" already registered at priority 0
Warning: font renderer for \\".bdf\\" already registered at priority 0
Warning: font renderer for \\".bdf.Z\\" already registered at priority 0
Warning: font renderer for \\".bdf.gz\\" already registered at priority 0
Warning: font renderer for \\".pmf\\" already registered at priority 0
Could not init font path element unix/:7100, removing from list!
SetClientVersion: 0 9

Maciek_Rutecki

  • Gość
Jak włączyć X-y?
« Odpowiedź #6 dnia: 2005-08-12, 22:28:44 »
2005-08-12 20:26:08 vegetka napisał:

> ojej. ja nie wiem, czy mogę. mam nadzieję, że nikt mnie za to nie zabije. plik nazywa się.

dpkg-reconfigure x-window-system

Odpyta Ciebie o pare rzeczy, potrzebna ksiazeczka od monitora. Zrob kopie /etc/X11/XF86Config-4 przed zmianami - na wszelki wypadek.

--
Maciek

PS. Nie mialem serca czytac calego loga, najprawdopodobniej wartosci:HorizSync, VertRefresh   masz nieprawidlowe.

Maciek_Rutecki

  • Gość
Jak włączyć X-y?
« Odpowiedź #7 dnia: 2005-08-12, 22:30:56 »
2005-08-12 22:28:44 Maciek_Rutecki napisał:

 >
 > PS. Nie mialem serca czytac calego loga, najprawdopodobniej wartosci:HorizSync,
 > VertRefresh   masz nieprawidlowe.
 >


(WW) VIA(0): Hyundai DeluxScan 14S: Using default hsync range of 28.00-33.00kHz
(WW) VIA(0): Hyundai DeluxScan 14S: using default vrefresh range of 43.00-72.00Hz

vegetka

  • Gość
Jak włączyć X-y?
« Odpowiedź #8 dnia: 2005-08-12, 22:32:17 »
heh... jest ok. sprawdzałem na stronie producenta. H: 30-50 Khz, V: 50-90 Hz. jest.ok. tudzież: była sytuacja [jeden raz], że przesterował monitor, ale tylko raz: pierwszy raz... teraz: nadal 640x480.

vegetka

  • Gość
Jak włączyć X-y?
« Odpowiedź #9 dnia: 2005-08-12, 22:33:29 »
to nie wiem....

conf się nie zapisuje?

vegetka

  • Gość
Jak włączyć X-y?
« Odpowiedź #10 dnia: 2005-08-12, 22:38:56 »
maciek mówi o defalut. ale ustawiam inne wartości.

Maciek_Rutecki

  • Gość
Jak włączyć X-y?
« Odpowiedź #11 dnia: 2005-08-12, 23:13:05 »
2005-08-12 22:38:56 vegetka napisał:

> maciek mówi o defalut. ale ustawiam inne wartości.


Jakie wasz wielkosci HorizSync, VertRefresh w /etc/X11/XF....conf?

--
Maciek

vegetka

  • Gość
Jak włączyć X-y?
« Odpowiedź #12 dnia: 2005-08-13, 17:49:16 »
więc wygląda to mniej więcej tak:
------------------------------------------------

section monitor
   identifier     hyundai deluxscan 14s
   horizsync   30-50
   vertrefresh   50-90
   option         dmps
endsection

Maciek_Rutecki

  • Gość
Jak włączyć X-y?
« Odpowiedź #13 dnia: 2005-08-13, 18:59:57 »
2005-08-13 17:49:16 vegetka napisał:

> więc wygląda to mniej więcej tak:
 > ------------------------------------------------
 >
 > section monitor
 >    identifier     hyundai deluxscan 14s
 >    horizsync   30-50
 >    vertrefresh   50-90
 >    option         dmps
 > endsection

Zobacz w \\"section \\"screen\\"\\" czy dopuszczalna jest rozdzielczosc dla wybranej glebi kolorow. Dla przykladu moj:
Wybrana glebia kolorow:

DefaultDepth   24

Rozdzielczosci dla 24 bitow:

SubSection \\"Display\\"
Depth      24
Modes      \\"1024x768\\" \\"800x600\\" \\"640x480\\"
EndSubSection

--
Maciek

vegetka

  • Gość
Jak włączyć X-y?
« Odpowiedź #14 dnia: 2005-08-14, 18:56:27 »
więc;

section screen
default screen
default video card
default deph 24
modes 1024x765, 800x600 i 640x480
end of subsection