Nowe posty

Autor Wątek: problem z dyskiem usb pod ubuntu  (Przeczytany 2801 razy)

onmily23

  • Gość
problem z dyskiem usb pod ubuntu
« dnia: 2007-04-23, 21:44:52 »
czesc posiadam dysk usb  wykrywa mi go  ale problem jest taki ze  nie moge nic z niego wyciac  ani usunac     tylko  moge  kopiowac  z niego  po wpiasaniu komendy w konsoli to mi pokazuje tomasz@tomasz-desktop:~$ lsusb
Bus 005 Device 004: ID 04cf:8818 Myson Century, Inc. Fast 3.5" External Storage
Bus 005 Device 001: ID 0000:0000  
Bus 004 Device 001: ID 0000:0000  
Bus 003 Device 001: ID 0000:0000  
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 001: ID 0000:0000  
tomasz@tomasz-desktop:~$
prosze o pomoc bo nie wiem  jak sobie poradzic z tym

Maciek_Rutecki

  • Gość
problem z dyskiem usb pod ubuntu
« Odpowiedź #1 dnia: 2007-04-23, 22:05:33 »
2007-04-23 21:44:52 onmily23 napisał:

> czesc posiadam dysk usb  wykrywa mi go  ale problem jest taki ze  nie moge nic z niego wyciac
 > ani usunac     tylko  moge  kopiowac  z niego  po wpiasaniu komendy w konsoli to mi pokazuje
 > tomasz@tomasz-desktop:~$ lsusb
 > Bus 005 Device 004: ID 04cf:8818 Myson Century, Inc. Fast 3.5" External Storage
 > Bus 005 Device 001: ID 0000:0000  
 > Bus 004 Device 001: ID 0000:0000  
 > Bus 003 Device 001: ID 0000:0000  
 > Bus 002 Device 001: ID 0000:0000  
 > Bus 001 Device 001: ID 0000:0000  
 > tomasz@tomasz-desktop:~$
 > prosze o pomoc bo nie wiem  jak sobie poradzic z tym

Zerknij co masz w dmesg po podpięciu dysku (ostatnie 15-20 linijek)

--
Maciek

PS. Co do napędów USB to zerknij w któryś z 3 ostatnich numerów Dragonii (dragonia.pl). Nie pamiętam w którym to było.

onmily23

  • Gość
problem z dyskiem usb pod ubuntu
« Odpowiedź #2 dnia: 2007-04-25, 19:48:07 »
czessc dmesg po tej komedzie to mi wyskoczylo Password:
su: Authentication failure
Wybacz.
tomasz@tomasz-desktop:~$ dmesg
[17179569.184000] Linux version 2.6.17-11-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Tue Mar 13 23:32:38 UTC 2007 (Ubuntu 2.6.17-11.37-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[17179569.184000]  BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 262128
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 32752 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 AMI                                   ) @ 0x000fa910
[17179569.184000] ACPI: RSDT (v001 AMIINT VIA_K7   0x00000010 MSFT 0x00000097) @ 0x3fff0000
[17179569.184000] ACPI: FADT (v001 AMIINT VIA_K7   0x00000011 MSFT 0x00000097) @ 0x3fff0030
[17179569.184000] ACPI: MADT (v001 AMIINT VIA_K7   0x00000009 MSFT 0x00000097) @ 0x3fff00c0
[17179569.184000] ACPI: DSDT (v001    VIA    K7VT4 0x00001000 MSFT 0x0100000d) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:8 APIC version 16
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hdc2 ro quiet splash locale=pl_PL
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 2082.938 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.844000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179570.844000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.880000] Memory: 1029628k/1048512k available (1911k kernel code, 18104k reserved, 1073k data, 308k init, 131008k highmem)
[17179570.880000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.960000] Calibrating delay using timer specific routine.. 4170.79 BogoMIPS (lpj=8341595)
[17179570.960000] Security Framework v1.0.0 initialized
[17179570.960000] SELinux:  Disabled at boot.
[17179570.960000] Mount-cache hash table entries: 512
[17179570.960000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179570.960000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179570.960000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179570.960000] CPU: L2 Cache: 256K (64 bytes/line)
[17179570.960000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[17179570.960000] Checking 'hlt' instruction... OK.
[17179570.976000] SMP alternatives: switching to UP code
[17179570.976000] Freeing SMP alternatives: 16k freed
[17179570.976000] checking if image is initramfs... it is
[17179571.420000] Freeing initrd memory: 5326k freed
[17179571.420000] ACPI: Core revision 20060707
[17179571.420000] ACPI: Looking for DSDT ... not found!
[17179571.424000] CPU0: AMD Athlon(tm) XP 2600+ stepping 01
[17179571.424000] Total of 1 processors activated (4170.79 BogoMIPS).
[17179571.424000] ENABLING IO-APIC IRQs
[17179571.424000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179571.568000] Brought up 1 CPUs
[17179571.568000] migration_cost=0
[17179571.568000] NET: Registered protocol family 16
[17179571.568000] EISA bus registered
[17179571.568000] ACPI: bus type pci registered
[17179571.572000] PCI: PCI BIOS revision 2.10 entry at 0xfdae1, last bus=1
[17179571.572000] PCI: Using configuration type 1
[17179571.576000] Setting up standard PCI resources
[17179571.584000] ACPI: Interpreter enabled
[17179571.584000] ACPI: Using IOAPIC for interrupt routing
[17179571.584000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.584000] PCI: Probing PCI hardware (bus 00)
[17179571.588000] PCI quirk: region 0800-087f claimed by vt8235 PM
[17179571.588000] PCI quirk: region 0400-040f claimed by vt8235 SMB
[17179571.588000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:11.1
[17179571.588000] Boot video device is 0000:01:00.0
[17179571.588000] ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
[17179571.600000] ACPI: Power Resource [URP1] (off)
[17179571.600000] ACPI: Power Resource [URP2] (off)
[17179571.600000] ACPI: Power Resource [FDDP] (off)
[17179571.600000] ACPI: Power Resource [LPTP] (off)
[17179571.600000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
[17179571.600000] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 10 11 12 14 15)
[17179571.604000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 12 14 15)
[17179571.604000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
[17179571.604000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.604000] pnp: PnP ACPI init
[17179571.604000] pnp: PnP ACPI: found 12 devices
[17179571.604000] PnPBIOS: Disabled by ACPI PNP
[17179571.604000] PCI: Using ACPI for IRQ routing
[17179571.604000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179571.608000] PCI: Bridge: 0000:00:01.0
[17179571.608000]   IO window: c000-cfff
[17179571.608000]   MEM window: dfe00000-dfefffff
[17179571.608000]   PREFETCH window: bfd00000-dfcfffff
[17179571.608000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179571.608000] NET: Registered protocol family 2
[17179571.636000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179571.636000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179571.636000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179571.636000] TCP: Hash tables configured (established 131072 bind 65536)
[17179571.636000] TCP reno registered
[17179571.640000] audit: initializing netlink socket (disabled)
[17179571.640000] audit(1177405980.640:1): initialized
[17179571.640000] highmem bounce pool size: 64 pages
[17179571.640000] VFS: Disk quotas dquot_6.5.1
[17179571.640000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.640000] Initializing Cryptographic API
[17179571.640000] io scheduler noop registered
[17179571.640000] io scheduler anticipatory registered
[17179571.640000] io scheduler deadline registered
[17179571.640000] io scheduler cfq registered (default)
[17179571.640000] isapnp: Scanning for PnP cards...
[17179571.992000] isapnp: No Plug & Play device found
[17179572.016000] Real Time Clock Driver v1.12ac
[17179572.016000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179572.016000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179572.016000] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179572.016000] mice: PS/2 mouse device common for all mice
[17179572.016000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179572.016000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179572.016000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179572.016000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179572.016000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179572.016000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179572.016000] EISA: Probing bus 0 at eisa.0
[17179572.016000] EISA: Detected 0 cards.
[17179572.016000] TCP bic registered
[17179572.016000] NET: Registered protocol family 1
[17179572.016000] NET: Registered protocol family 8
[17179572.016000] NET: Registered protocol family 20
[17179572.016000] Using IPI No-Shortcut mode
[17179572.016000] ACPI: (supports S0 S1 S4 S5)
[17179572.016000] Freeing unused kernel memory: 308k freed
[17179572.044000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179573.156000] Capability LSM initialized
[17179573.672000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[17179573.672000] ACPI: Unable to derive IRQ for device 0000:00:11.1
[17179573.672000] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
[17179573.672000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
[17179573.672000] VP_IDE: chipset revision 6
[17179573.672000] VP_IDE: not 100% native mode: will probe irqs later
[17179573.672000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[17179573.672000]     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
[17179573.672000]     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[17179573.672000] Probing IDE interface ide0...
[17179574.540000] hda: HL-DT-ST DVDRAM GSA-H42L, ATAPI CD/DVD-ROM drive
[17179575.324000] hdb: LITE-ON CD-RW SOHR-5238S, ATAPI CD/DVD-ROM drive
[17179575.384000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179575.388000] Probing IDE interface ide1...
[17179575.804000] hdc: WDC WD1600JB-00GVC0, ATA DISK drive
[17179576.480000] ide1 at 0x170-0x177,0x376 on irq 15
[17179576.512000] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179576.512000] Uniform CD-ROM driver Revision: 3.20
[17179576.520000] hdb: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179576.524000] hdc: max request size: 512KiB
[17179576.532000] hdc: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(33)
[17179576.536000] hdc: cache flushes supported
[17179576.536000]  hdc: hdc1 hdc2 hdc3
[17179576.776000] usbcore: registered new driver usbfs
[17179576.776000] usbcore: registered new driver hub
[17179576.780000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179576.780000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179576.780000] ohci_hcd 0000:00:0c.0: OHCI Host Controller
[17179576.780000] ohci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 1
[17179576.780000] ohci_hcd 0000:00:0c.0: irq 169, io mem 0xdffff000
[17179576.784000] USB Universal Host Controller Interface driver v3.0
[17179576.840000] usb usb1: configuration #1 chosen from 1 choice
[17179576.840000] hub 1-0:1.0: USB hub found
[17179576.840000] hub 1-0:1.0: 2 ports detected
[17179576.956000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177
[17179576.956000] PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 1
[17179576.956000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179576.956000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[17179576.956000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000e400
[17179576.956000] usb usb2: configuration #1 chosen from 1 choice
[17179576.956000] hub 2-0:1.0: USB hub found
[17179576.956000] hub 2-0:1.0: 2 ports detected
[17179577.060000] ACPI: PCI Interrupt 0000:00:10.1 -> GSI 21 (level, low) -> IRQ 177
[17179577.060000] PCI: Via IRQ fixup for 0000:00:10.1, from 3 to 1
[17179577.060000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179577.060000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[17179577.060000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000e800
[17179577.060000] usb usb3: configuration #1 chosen from 1 choice
[17179577.060000] hub 3-0:1.0: USB hub found
[17179577.060000] hub 3-0:1.0: 2 ports detected
[17179577.164000] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 177
[17179577.164000] PCI: Via IRQ fixup for 0000:00:10.2, from 5 to 1
[17179577.164000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179577.164000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[17179577.164000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000ec00
[17179577.164000] usb usb4: configuration #1 chosen from 1 choice
[17179577.164000] hub 4-0:1.0: USB hub found
[17179577.164000] hub 4-0:1.0: 2 ports detected
[17179577.268000] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 177
[17179577.268000] PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 1
[17179577.268000] ehci_hcd 0000:00:10.3: EHCI Host Controller
[17179577.272000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[17179577.272000] ehci_hcd 0000:00:10.3: irq 177, io mem 0xdfffef00
[17179577.272000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.272000] usb usb5: configuration #1 chosen from 1 choice
[17179577.272000] hub 5-0:1.0: USB hub found
[17179577.272000] hub 5-0:1.0: 6 ports detected
[17179577.300000] usb 2-1: new full speed USB device using uhci_hcd and address 2
[17179577.464000] Attempting manual resume
[17179577.500000] kjournald starting.  Commit interval 5 seconds
[17179577.500000] EXT3-fs: mounted filesystem with ordered data mode.
[17179578.248000] usb 5-1: new high speed USB device using ehci_hcd and address 2
[17179578.384000] usb 5-1: configuration #1 chosen from 1 choice
[17179586.412000] Floppy drive(s): fd0 is 1.44M, fd1 is 1.44M
[17179586.432000] FDC 0 is a post-1991 82077
[17179586.724000] input: PC Speaker as /class/input/input1
[17179586.808000] Linux agpgart interface v0.101 (c) Dave Jones
[17179586.840000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[17179586.840000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 185
[17179586.840000] PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 9
[17179586.840000] eth0: VIA Rhine II at 0x1dc00, 00:0b:6a:7c:39:77, IRQ 185.
[17179586.840000] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
[17179586.872000] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[17179586.876000] agpgart: AGP aperture is 64M @ 0xe0000000
[17179586.988000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179586.992000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179587.084000] parport: PnPBIOS parport detected.
[17179587.084000] parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[17179587.320000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17179587.424000] irda_init()
[17179587.424000] NET: Registered protocol family 23
[17179587.584000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 193
[17179587.584000] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 1
[17179587.584000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179587.616000] usbcore: registered new driver libusual
[17179587.652000] SCSI subsystem initialized
[17179587.672000] Initializing USB Mass Storage driver...
[17179587.672000] scsi0 : SCSI emulation for USB Mass Storage devices
[17179587.684000] usbcore: registered new driver usb-storage
[17179587.684000] USB Mass Storage support registered.
[17179587.684000] usb-storage: device found at 2
[17179587.684000] usb-storage: waiting for device to settle before scanning
[17179587.816000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[17179587.832000] ts: Compaq touchscreen protocol output
[17179588.300000] lp0: using parport0 (interrupt-driven).
[17179588.336000] Adding 1020088k swap on /dev/disk/by-uuid/65eb5b8f-3b4b-466a-a5ff-892e3443218b.  Priority:-1 extents:1 across:1020088k
[17179588.404000] EXT3 FS on hdc2, internal journal
[17179588.452000] NET: Registered protocol family 17
[17179588.644000] kjournald starting.  Commit interval 5 seconds
[17179588.652000] EXT3 FS on hdc3, internal journal
[17179588.652000] EXT3-fs: mounted filesystem with ordered data mode.
[17179592.056000] NET: Registered protocol family 10
[17179592.056000] lo: Disabled Privacy Extensions
[17179592.056000] IPv6 over IPv4 tunneling driver
[17179592.684000] usb-storage: device scan complete
[17179592.684000]   Vendor: HTS54804  Model: 0M9AT00           Rev: MG2O
[17179592.684000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[17179592.704000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
[17179592.704000] sda: Write Protect is off
[17179592.704000] sda: Mode Sense: 00 14 00 00
[17179592.704000] sda: assuming drive cache: write through
[17179592.704000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
[17179592.704000] sda: Write Protect is off
[17179592.704000] sda: Mode Sense: 00 14 00 00
[17179592.704000] sda: assuming drive cache: write through
[17179592.704000]  sda: sda1
[17179593.056000] sd 0:0:0:0: Attached scsi disk sda
[17179593.064000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179594.244000] ACPI: Power Button (FF) [PWRF]
[17179594.244000] ACPI: Power Button (CM) [PWRB]
[17179594.244000] ACPI: Sleep Button (CM) [SLPB]
[17179594.356000] ibm_acpi: ec object not found
[17179594.392000] pcc_acpi: loading...
[17179596.448000] [drm] Initialized drm 1.0.1 20051102
[17179596.460000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179596.464000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[17179597.116000] apm: BIOS not found.
[17179597.888000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17179597.888000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[17179597.888000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[17179601.780000] Bluetooth: Core ver 2.8
[17179601.780000] NET: Registered protocol family 31
[17179601.780000] Bluetooth: HCI device and connection manager initialized
[17179601.780000] Bluetooth: HCI socket layer initialized
[17179601.824000] Bluetooth: L2CAP ver 2.8
[17179601.824000] Bluetooth: L2CAP socket layer initialized
[17179601.840000] Bluetooth: RFCOMM socket layer initialized
[17179601.840000] Bluetooth: RFCOMM TTY layer initialized
[17179601.840000] Bluetooth: RFCOMM ver 1.7
[17179602.712000] eth0: no IPv6 routers present
[17179606.232000] [drm] Setting GART location based on new memory map
[17179606.232000] [drm] Loading R300 Microcode
[17179606.232000] [drm] writeback test succeeded in 1 usecs
[17179627.300000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179627.448000] NTFS-fs warning (device sda1): parse_options(): Option iocharset is deprecated. Please use option nls= in the future.
[17179627.944000] NTFS volume version 3.1.
[17184056.536000] usb 5-1: USB disconnect, address 2
[17185678.440000] usb 5-1: new high speed USB device using ehci_hcd and address 3
[17185678.596000] usb 5-1: configuration #1 chosen from 1 choice
[17185678.596000] scsi1 : SCSI emulation for USB Mass Storage devices
[17185678.596000] usb-storage: device found at 3
[17185678.596000] usb-storage: waiting for device to settle before scanning
[17185683.596000] usb-storage: device scan complete
[17185683.596000]   Vendor: HTS54804  Model: 0M9AT00           Rev: MG2O
[17185683.596000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[17185683.600000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
[17185683.600000] sda: Write Protect is off
[17185683.600000] sda: Mode Sense: 00 14 00 00
[17185683.600000] sda: assuming drive cache: write through
[17185683.600000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
[17185683.600000] sda: Write Protect is off
[17185683.600000] sda: Mode Sense: 00 14 00 00
[17185683.600000] sda: assuming drive cache: write through
[17185683.600000]  sda: sda1
[17185683.624000] sd 1:0:0:0: Attached scsi disk sda
[17185683.624000] sd 1:0:0:0: Attached scsi generic sg0 type 0
[17185684.156000] NTFS-fs warning (device sda1): parse_options(): Option iocharset is deprecated. Please use option nls= in the future.
[17185684.200000] NTFS volume version 3.1.
tomasz@tomasz-desktop:~$
i jak bys mugl napisz mi co jest  zle w tym  ze nie moge usuwac z tego dysku przenosnego  prosze o pomoc

onmily23

  • Gość
problem z dyskiem usb pod ubuntu
« Odpowiedź #3 dnia: 2007-04-26, 00:12:58 »
czesc a potej komendzie to pokazuje tomasz@tomasz-desktop:~$ sudo fdisk -l
Password:

Disk /dev/hdc: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/hdc1               1         127     1020096   82  Linux swap / Solaris
/dev/hdc2             128        2677    20482875   83  Linux
/dev/hdc3            2678       19457   134785350   83  Linux

Disk /dev/sda: 40.0 GB, 40007761920 bytes
255 heads, 63 sectors/track, 4864 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1        4864    39070048+   7  HPFS/NTFS
tylko co zrobic to   nie wiem  zebym mogl   kopiowac na ten dysk i usuwac z niego  jak narazie moge tylko z niego skopiowac i tyle  posze o pomoc

HelDoRe

  • Gość
problem z dyskiem usb pod ubuntu
« Odpowiedź #4 dnia: 2007-04-26, 08:37:06 »
Partycje na tym dysku masz w NTFSie, kernel ma modul do obslugi tego filesystemu, ale domyslnie jest on ustawiony do read-only.
Wiec albo kompilujesz jajko w opcja read-write w module ntfs (co jesli dobrze pamietam jest bardzo experimental).

Albo instalujesz :
http://www.ntfs-3g.org/

(pamietaj ze musisz miec FUSE zeby to uruchomic).




2007-04-26 00:12:58 onmily23 napisał:

>   czesc a potej komendzie to pokazuje tomasz@tomasz-desktop:~$ sudo fdisk -l
 > Password:
 >
 > Disk /dev/hdc: 160.0 GB, 160041885696 bytes
 > 255 heads, 63 sectors/track, 19457 cylinders
 > Units = cylinders of 16065 * 512 = 8225280 bytes
 >
 >    Device Boot      Start         End      Blocks   Id  System
 > /dev/hdc1               1         127     1020096   82  Linux swap / Solaris
 > /dev/hdc2             128        2677    20482875   83  Linux
 > /dev/hdc3            2678       19457   134785350   83  Linux
 >
 > Disk /dev/sda: 40.0 GB, 40007761920 bytes
 > 255 heads, 63 sectors/track, 4864 cylinders
 > Units = cylinders of 16065 * 512 = 8225280 bytes
 >
 >    Device Boot      Start         End      Blocks   Id  System
 > /dev/sda1               1        4864    39070048+   7  HPFS/NTFS
 > tylko co zrobic to   nie wiem  zebym mogl   kopiowac na ten dysk i usuwac z niego  jak narazie
 > moge tylko z niego skopiowac i tyle  posze o pomoc