2006-06-08 22:03:46 sakul napisał:
> Debian sarge 3.1 stable
>
>
> wrzucilem kolejna sieciowke, jako eth1,
>
> podnosze ja z poziomu ifconfig eth1 up
>
> i wsyzsktof ajnie, no ale przydaloby sie ja skonfigurowac wiec wrzucam do interfaces takie
> linijki:
>
> --------------------------/etc/network/interfaces/-------------------
>
> # The loopback network interface
> auto lo
> iface lo inet loopback
>
> # siec wanowska
>
> auto eth0
> iface eth0 inet dhcp
>
> # siec lanowska
>
> auto eth0
> iface eth0 inet static
> name Karta LAN typu Ethernet
> address 212.160.162.114
> netmask 255.255.255.240
> broadcast 212.160.162.127
> network 212.160.162.112
> gateway 212.160.162.113
> -----------------------------------------------------------------------------------
>
> no i po /etc/init.d/networking restart
>
> pokazuje mi sie:
>
> # etc/init.d/networking restart
> Setting up IP spoofing protection: rp_filter.
> Enabling packet forwarding...done.
> Reconfiguring network interfaces...ifup: interface lo already configured
> Internet Software Consortium DHCP Client 2.0pl5
> Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
> All rights reserved.
>
> Please contribute if you find this software useful.
> For info, please visit
http://www.isc.org/dhcp-contrib.html >
> Listening on LPF/eth0/00:0d:81:31:d1:66
> Sending on LPF/eth0/00:0d:81:31:d2:66
> Sending on Socket/fallback/fallback-net
> DHCPREQUEST on eth0 to 255.255.255.255 port 67
> DHCPACK from 80.xxx.xx.1
> bound to 80.xxx.xxx.xxx -- renewal in 21600 seconds.
> Don\\'t seem to be have all the variables for eth1/inet.
> Failed to bring up eth1.
> done.
>
>
> i nie bardzo wiem o co chodzi... na drugiej maszynie mam taki sam pliczek tylko ze tam oba
> interfejsy mam static - na sarge testing i tam dziala...
> do tego dhcp3-server tez sie nie odpala na tej samej konfiguracji jaka mam w testing...
>
>
a zamien ze soba kabelki w gniazdach kart sieciowych