TeamSpeak

[blinkey01]

Od niedawna jestem użytkownikiem SuSE 10.0 . Instalowałem je z napędu DVD. Po instalacji DVD odłączyłem (pożyczone) i podłączyłem swoją nagrywarkę LiteOn. Problem w tym, że SuSE jej nie wykrywa. Pod windowsem wszystko działa normalnie. Prosze o pomoc.

[jk33]

Co znaczy nie wykrywa? Sprecyzuj pytanie.

Co mówi dmesg|grep CD ?

[blinkey01]

2006-01-25 18:22:35 jk33 napisał:

> Co znaczy nie wykrywa? Sprecyzuj pytanie.
 >
 > Co mówi dmesg|grep CD ?
 >

Po prostu nie ma. I nie mogę dodać w żaden sposób. W /dev/ nie ma w /media/ nie ma a stary DVD napęd jest.

[blinkey01]

Po wpisaniu grep CD nic nie wyświetla.

po wpisaniu dmesg:

Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126960 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 Nvidia                                ) @ 0x000f75c0
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff74c0
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
ACPI: local apic disabled
Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: root=/dev/hda7 vga=0x31a selinux=0    resume=/dev/hda8  splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1913.405 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 513616k/524224k available (2028k kernel code, 9972k reserved, 700k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3830.66 BogoMIPS (lpj=7661328)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: AMD Athlon(tm) XP 2600+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking \\'hlt\\' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 1700k freed
ACPI: Looking for DSDT in initrd... not found!
 not found!
ACPI: setting ELCR to 0200 (from 0820)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2
PCI: Using configuration type 1
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [_SB_.PCI0] segment is 0
PCI: nForce2 C1 Halt Disconnect fixup
Boot video device is 0000:02:00.0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn\\'t work, try \\"pci=routeirq\\".  If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
pnp: 00:00: ioport range 0x4400-0x447f has been reserved
pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
pnp: 00:00: ioport range 0x4200-0x427f has been reserved
pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
pnp: 00:01: ioport range 0x5000-0x503f has been reserved
pnp: 00:01: ioport range 0x5500-0x553f has been reserved
PCI: Bridge: 0000:00:08.0
  IO window: d000-dfff
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: e4000000-e5ffffff
  PREFETCH window: d0000000-dfffffff
PCI: Setting latency timer of device 0000:00:08.0 to 64
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1138228010.716:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xd0000000, mapped to 0xe0880000, using 10240k, total 131072k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: protected mode interface info at c000:dcd0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 112645 bytes,<6>...found (1280x1024, 17839 bytes, v3).
Console: switching to colour frame buffer device 158x59
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.38
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices:
HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
ACPI: (supports S0 S1 S4 S4bios S5)
Freeing unused kernel memory: 204k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
    ACPI-0212: *** Warning: Device is not power manageable
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn\\'t set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
logips2pp: Detected unknown logitech mouse model 85
hda: SAMSUNG SP0812N, ATA DISK drive
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
Probing IDE interface ide1...
hdd: LITE-ON CD-RW SOHR-5238S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: CPU0 (power states: C1[C1])
hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
swsusp: Suspend partition has wrong signature?
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
bootsplash: status on console 0 changed to on
spurious 8259A interrupt: IRQ7.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Adding 1694816k swap on /dev/hda8.  Priority:-1 extents:1
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNK2] -> GSI 5 (level, low) -> IRQ 5
PCI parallel port detected: 1409:7268, I/O at 0xd000(0xd400)
parport1: PC-style at 0xd000 (0xd400) [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
lp1: using parport1 (polling).
NET: Registered protocol family 10
Disabled Privacy Extensions on device c036b920(lo)
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 248 bytes per conntrack
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2005 April 22 USB 1.1 \\'Open\\' Host Controller (OHCI) Driver (PCI)
    ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 11, io mem 0xe6003000
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.35.
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
    ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:02.1 -> Link [LUBB] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.1: irq 5, io mem 0xe6004000
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
    ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUB2] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: debug port 1
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:02.2: irq 11, io mem 0xe6000000
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LMAC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:04.0 to 64
0000:00:04.0: Invalid Mac address detected: 00:00:00:00:00:00
Please complain to your hardware vendor. Switching to a random MAC.
SCSI subsystem initialized
libata version 1.12 loaded.
ohci_hcd 0000:00:02.0: wakeup
eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
    ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:06.0 to 64
ohci_hcd 0000:00:02.1: wakeup
usb 1-2: new full speed USB device using ohci_hcd and address 2
intel8x0_measure_ac97_clock: measured 54420 usecs
intel8x0: clocking to 47494
usb 2-2: new full speed USB device using ohci_hcd and address 2
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1904
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
eagle_usb: module not supported by Novell, setting U taint flag.
[eagle-usb] driver V2.3.2 loaded
[eagle-usb] New USB ADSL device detected, waiting for DSP code...
[eagle-usb] Interface 0 accepted.
[eagle-usb] created proc entry at : /proc/driver/eagle-usb/002-002
usbcore: registered new driver eagle-usb
[eagle-usb] ioctl EU_IO_CMVS received and treated.
[eagle-usb] ioctl EU_IO_OPTIONS received
[eagle-usb] ioctl EU_IO_DSP received
[eagle-usb] Loading DSP code to device...
[eagle-usb] DSP code successfully loaded to device
[eagle-usb] Modem operational !!
[eagle-usb]  Ethernet device eth0 created.
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
bootsplash: status on console 0 changed to on
NET: Registered protocol family 17
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
eth2: no IPv6 routers present
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
IA-32 Microcode Update Driver: v1.14
microcode: CPU0 not a capable Intel processor
microcode: No new microcode data for CPU0
IA-32 Microcode Update Driver v1.14 unregistered
bootsplash: status on console 0 changed to on
powernow-k8: Processor cpuid 6a0 not supported
bootsplash: status on console 0 changed to on
subfs 0.9
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
subfs: unsuccessful attempt to mount media (256)
SFW2-INext-DROP-DEFLT-INV IN=ppp0 OUT= MAC= SRC=213.25.2.110 DST=83.27.100.176 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=27001 PROTO=TCP SPT=3185 DPT=50232 WINDOW=0 RES=0x00 ACK RST URGP=0
SFW2-INext-DROP-DEFLT IN=ppp0 OUT= MAC= SRC=83.27.121.121 DST=83.27.100.176 LEN=64 TOS=0x00 PREC=0x00 TTL=47 ID=6924 DF PROTO=TCP SPT=2453 DPT=135 WINDOW=53760 RES=0x00 SYN URGP=0 OPT (020405B4010303030101080A000000000000000001010402)
SFW2-INext-DROP-DEFLT IN=ppp0 OUT= MAC= SRC=83.27.121.121 DST=83.27.100.176 LEN=64 TOS=0x00 PREC=0x00 TTL=47 ID=6999 DF PROTO=TCP SPT=2453 DPT=135 WINDOW=53760 RES=0x00 SYN URGP=0 OPT (020405B4010303030101080A000000000000000001010402)
SFW2-INext-DROP-DEFLT IN=ppp0 OUT= MAC= SRC=83.27.216.250 DST=83.27.100.176 LEN=48 TOS=0x00 PREC=0x00 TTL=125 ID=22571 DF PROTO=TCP SPT=2344 DPT=135 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (0204058C01010402)
SFW2-INext-DROP-DEFLT-INV IN=ppp0 OUT= MAC= SRC=213.25.2.110 DST=83.27.100.176 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=27210 PROTO=TCP SPT=3185 DPT=50232 WINDOW=0 RES=0x00 ACK RST URGP=0
SFW2-INext-DROP-DEFLT IN=ppp0 OUT= MAC= SRC=221.12.161.110 DST=83.27.100.176 LEN=947 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=UDP SPT=49620 DPT=1030 LEN=927
SFW2-INext-DROP-DEFLT IN=ppp0 OUT= MAC= SRC=83.27.127.79 DST=83.27.100.176 LEN=48 TOS=0x00 PREC=0x00 TTL=127 ID=3069 DF PROTO=TCP SPT=3617 DPT=139 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (0204058C01010402)
SFW2-INext-DROP-DEFLT IN=ppp0 OUT= MAC= SRC=83.27.127.134 DST=83.27.100.176 LEN=48 TOS=0x00 PREC=0x00 TTL=127 ID=26824 DF PROTO=TCP SPT=3849 DPT=445 WINDOW=16384 RES=0x00 SYN URGP=0 OPT (020405B401010402)
SFW2-INext-DROP-DEFLT IN=ppp0 OUT= MAC= SRC=83.27.134.214 DST=83.27.100.176 LEN=48 TOS=0x00 PREC=0x00 TTL=127 ID=21872 DF PROTO=TCP SPT=4982 DPT=139 WINDOW=16384 RES=0x00 SYN URGP=0 OPT (020405B401010402)
SFW2-INext-DROP-DEFLT-INV IN=ppp0 OUT= MAC= SRC=213.25.2.110 DST=83.27.100.176 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=28420 PROTO=TCP SPT=3185 DPT=50232 WINDOW=0 RES=0x00 ACK RST URGP=0

[jk33]

2006-01-25 22:37:29 blinkey01 napisał:

> Po wpisaniu grep CD nic nie wyświetla.
 >
 > po wpisaniu dmesg:
 > hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
 > Uniform CD-ROM driver Revision: 3.20
 
Miałeś wpisać całe \\" dmesg|grep CD \\"
Wtedy grep wyświetliby tylko te linijki
dmesg, które zawierały ciąg \\"CD\\".
(czyli prawdopodobnie tylko te dwie)

Jak widać powyżej Linuks widzi Twój cdrom
jako urządzenie /dev/hdd.

Musisz więc w /etc/fstab zmienić linijkę
dotyczącą cdromu, tak aby montował to
urządzenie i ewentualnie zrobić symlink do tego urządzenia
w /dev (rm /dev/cdrom;ln -s /dev/hdd /dev/cdrom).

pozdrawiam

[blinkey01]

Zmieniłem. Dodałem w Yascie. Jest już w /media/ ale jako odmontowany cdrecorder. Nie mogę go zamontować. SuSE wykryło ją jako dev/hdd/ . Co ciekawe, nagrałem nią płytkę przez k3d.

[chmooreck]

mam nadzieje, ze mountowac probowales po wlozeniu nagranej plytki ?

jak tak, to sprobuj zmountowac spod konsoli i zobacz co mu nie pasuje...

[blinkey01]

Ok. Już popróbowałem różnymi metodami i sie udało. Wszystkim dziękuje za porady. Okazały sie bardzo przydatne

[chmooreck]

wypada sie podzielic z innymi co bylo nie tak i jak to naprawiles... tak dla potomnych ;-)

[CormaCk]

Zainstalowalem program,wbijam sie na serwer i nie moge mowic :/
Wszystkich slychac tylko ja mowic nie moge. Sprawdzalem  na dwoch mikrofonach. Prosze o pomoc.

[lo53r]

2006-01-25 16:40:25 CormaCk napisał:

> Zainstalowalem program,wbijam sie na serwer i nie moge mowic :/
 > Wszystkich slychac tylko ja mowic nie moge. Sprawdzalem  na dwoch mikrofonach. Prosze o pomoc.
 
Odmutować mikrofon w stawieniach ?