Nowe posty

xx Dystrybucja pod HP Omen (6)
Wczoraj o 23:30:08
xx [Poradnik] Wyszukiwanie Sterowników (2)
Wczoraj o 21:08:23
lamp Problem z Linux Lite po instalacji (0)
Wczoraj o 19:50:30
xx Ile pingwinów? (1)
Wczoraj o 08:59:24
xx konfiguracja pale moon (0)
2024-03-24, 21:53:42
xx Plasma 6 w Neonie ssie trochę mniej ... (10)
2024-03-23, 02:38:11
xx problem z instalacja sterowników do karty sieciowej (3)
2024-03-18, 18:10:16
xx Plik abc.001 (1)
2024-03-17, 17:48:27
xx Zlecę dopracowanie programu w MatLab (0)
2024-03-13, 15:28:40
xx Linux Mint 21.3 XFCE brak dźwieku po paru minutach (karta muzyczna zintegrowana) (5)
2024-03-12, 23:07:01

Autor Wątek: SLACKWARE 14.1 na RAID 5 [SOLVED]  (Przeczytany 3647 razy)

Disc

  • Gość
SLACKWARE 14.1 na RAID 5 [SOLVED]
« dnia: 2015-03-10, 14:40:18 »
Witajcie.

Mam maszynkę HP PROLIANT ML 359 G4 z pięcioma dyskami 80GB spiętymi w RAID 5. Próbuję zainstalować na tym Slackware 14.1, lecz niestety cfdisk nie wykrywa dysku. Uprzejmie proszę o pomoc - gdzie szukać problemu...

Disc

  • Gość
SLACKWARE 14.1 na RAID 5 [SOLVED]
« Odpowiedź #1 dnia: 2015-03-10, 15:03:34 »
Zrzut z dmesg:

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.17 (root@hive64) (gcc version 4.8.2 (GCC) ) #2 SMP Wed Oct 23 16:34:38 CDT 2013
Command line: initrd=initrd.img load_ramdisk=1 prompt_ramdisk=0 rw printk.time=0 nomodeset SLACK_KERNEL=huge.s BOOT_IMAGE=/kernels/huge.s/bzImage
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003fff2fff] usable
BIOS-e820: [mem 0x000000003fff3000-0x000000003fffafff] ACPI data
BIOS-e820: [mem 0x000000003fffb000-0x000000003fffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fecfffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.3 present.
DMI: HP ProLiant ML350 G4, BIOS D17 12/02/2004
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x3fff3 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 040000000 mask FC0000000 uncachable
  1 base 080000000 mask F80000000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000f4fa0-0x000f4faf] mapped at [ffff8800000f4fa0]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x0236f000, 0x0236ffff] PGTABLE
BRK [0x02370000, 0x02370fff] PGTABLE
BRK [0x02371000, 0x02371fff] PGTABLE
init_memory_mapping: [mem 0x3e000000-0x3e1fffff]
 [mem 0x3e000000-0x3e1fffff] page 2M
init_memory_mapping: [mem 0x3c000000-0x3dffffff]
 [mem 0x3c000000-0x3dffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x3bffffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3bffffff] page 2M
init_memory_mapping: [mem 0x3e200000-0x3fff2fff]
 [mem 0x3e200000-0x3fdfffff] page 2M
 [mem 0x3fe00000-0x3fff2fff] page 4k
BRK [0x02372000, 0x02372fff] PGTABLE
RAMDISK: [mem 0x3e2ee000-0x3fff1fff]
ACPI: RSDP 00000000000f4f20 00024 (v02 HP    )
ACPI: XSDT 000000003fff3280 00044 (v01 HP     D17      00000002   Ň? 0000162E)
ACPI: FACP 000000003fff3300 000F4 (v03 HP     D17      00000002   Ň? 0000162E)
ACPI BIOS Bug: Warning: Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20130328/tbfadt-653)
ACPI: DSDT 000000003fff3400 01CAA (v01 HP         DSDT 00000001 INTL 20030228)
ACPI: FACS 000000003fff30c0 00040
ACPI: SPCR 000000003fff3100 00050 (v01 HP     SPCRRBSU 00000001   Ň? 0000162E)
ACPI: MCFG 000000003fff3180 0003C (v01 HP     ProLiant 00000001      00000000)
ACPI: APIC 000000003fff31c0 000B6 (v01 HP     00000083 00000002      00000000)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003ca00000-ffff88003d9fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009efff]
  node   0: [mem 0x00100000-0x3fff2fff]
On node 0 totalpages: 262033
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 4032 pages used for memmap
  DMA32 zone: 258035 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec10000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec80000] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec80000, GSI 48-71
ACPI: IOAPIC (id[0x0b] address[0xfec80100] gsi_base[72])
IOAPIC[3]: apic_id 11, version 32, address 0xfec80100, GSI 72-95
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 8 CPUs, 6 hotplug CPUs
nr_irqs_gsi: 112
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
e820: [mem 0x40000000-0xfebfffff] available for PCI devices
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88003e000000 s79424 r8192 d22976 u262144
pcpu-alloc: s79424 r8192 d22976 u262144 alloc=1*2097152
pcpu-alloc:
  • 0 1 2 3 4 5 6 7

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257916
Kernel command line: initrd=initrd.img load_ramdisk=1 prompt_ramdisk=0 rw printk.time=0 nomodeset SLACK_KERNEL=huge.s BOOT_IMAGE=/kernels/huge.s/bzImage
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
No AGP bridge found
Memory: 979376k/1048524k available (11725k kernel code, 392k absent, 68756k reserved, 5712k data, 1272k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
   CONFIG_RCU_FANOUT set to non-default value of 32
   RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
NR_IRQS:8448 nr_irqs:1968 16
Console: colour VGA+ 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 3000.229 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.45 BogoMIPS (lpj=3000229)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
tlb_flushall_shift: 6
Freeing SMP alternatives: 36k freed
ACPI: Core revision 20130328
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 36377 entries in 143 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(TM) CPU 3.00GHz (fam: 0f, model: 04, stepping: 01)
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version:                0
... bit width:              40
... generic registers:      18
... value mask:             000000ffffffffff
... max period:             0000007fffffffff
... fixed-purpose events:   0
... event mask:             000000000003ffff
smpboot: Booting Node   0, Processors  #1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (12000.91 BogoMIPS)
devtmpfs: initialized
xor: measuring software checksum speed
   prefetch64-sse:  4220.000 MB/sec
   generic_sse:  4160.000 MB/sec
xor: using function: prefetch64-sse (4220.000 MB/sec)
atomic64 test passed for x86-64 platform with CX8 and with SSE
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: Intel Corporation E7520 Memory Controller Hub with MMCONFIG support
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
raid6: sse2x1    2148 MB/s
raid6: sse2x2    3242 MB/s
raid6: sse2x4    3117 MB/s
raid6: using algorithm sse2x2 (3242 MB/s)
raid6: using intx1 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\\_S1_] (20130328/hwxface-568)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\\_S2_] (20130328/hwxface-568)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\\_S3_] (20130328/hwxface-568)
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-02])
acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
PCI: root bus 00: using default resources
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-02]
pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [8086:3590] type 00 class 0x060000
pci 0000:00:02.0: [8086:3595] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:3597] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [8086:3599] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:25ae] type 01 class 0x060400
pci 0000:00:1d.0: [8086:25a9] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io  0x2000-0x201f]
pci 0000:00:1d.1: [8086:25aa] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io  0x2020-0x203f]
pci 0000:00:1d.4: [8086:25ab] type 00 class 0x088000
pci 0000:00:1d.4: reg 10: [mem 0xfbef0000-0xfbef000f]
pci 0000:00:1d.5: [8086:25ac] type 00 class 0x080020
pci 0000:00:1d.7: [8086:25ad] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xfbee0000-0xfbee03ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
pci 0000:00:1f.0: [8086:25a1] type 00 class 0x060100
pci 0000:00:1f.0: quirk: [io  0x0900-0x097f] claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x0800-0x083f] claimed by ICH4 GPIO
pci 0000:00:1f.1: [8086:25a2] type 00 class 0x01018a
pci 0000:00:1f.1: reg 10: [io  0x01f0-0x01f7]
pci 0000:00:1f.1: reg 14: [io  0x03f4-0x03f7]
pci 0000:00:1f.1: reg 18: [io  0x0170-0x0177]
pci 0000:00:1f.1: reg 1c: [io  0x0374-0x0377]
pci 0000:00:1f.1: reg 20: [io  0x0500-0x050f]
pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
pci_bus 0000:05: busn_res: can not insert [bus 05-0c] under [bus 00-02] (conflicts with (null) [bus 00-02])
pci 0000:05:00.0: [8086:0329] type 01 class 0x060400
pci 0000:05:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.2: [8086:032a] type 01 class 0x060400
pci 0000:05:00.2: PXH quirk detected; SHPC device MSI disabled
pci 0000:05:00.2: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: PCI bridge to [bus 05-0c]
pci 0000:00:02.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:02.0:   bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:05:00.0: PCI bridge to [bus 06-08]
pci 0000:09:02.0: [0e11:0046] type 00 class 0x010400
pci 0000:09:02.0: reg 10: [mem 0xfdff0000-0xfdff1fff 64bit]
pci 0000:09:02.0: reg 18: [io  0x5000-0x50ff]
pci 0000:09:02.0: reg 1c: [mem 0xfdf80000-0xfdfbffff 64bit]
pci 0000:09:02.0: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:09:02.0: supports D1
pci 0000:05:00.2: PCI bridge to [bus 09-0c]
pci 0000:05:00.2:   bridge window [io  0x5000-0x5fff]
pci 0000:05:00.2:   bridge window [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:0d: busn_res: can not insert [bus 0d-0f] under [bus 00-02] (conflicts with (null) [bus 00-02])
pci 0000:00:04.0: PCI bridge to [bus 0d-0f]
pci_bus 0000:10: busn_res: can not insert [bus 10-12] under [bus 00-02] (conflicts with (null) [bus 00-02])
pci 0000:00:06.0: PCI bridge to [bus 10-12]
pci_bus 0000:02: busn_res: can not insert [bus 02-04] under [bus 00-02] (conflicts with (null) [bus 00-02])
pci 0000:02:03.0: [1000:0030] type 00 class 0x010000
pci 0000:02:03.0: reg 10: [io  0x4000-0x40ff]
pci 0000:02:03.0: reg 14: [mem 0xfdee0000-0xfdefffff 64bit]
pci 0000:02:03.0: reg 1c: [mem 0xfdec0000-0xfdedffff 64bit]
pci 0000:02:03.0: reg 30: [mem 0x00000000-0x000fffff pref]
pci 0000:02:03.0: supports D1 D2
pci 0000:02:03.1: [1000:0030] type 00 class 0x010000
pci 0000:02:03.1: reg 10: [io  0x4400-0x44ff]
pci 0000:02:03.1: reg 14: [mem 0xfdea0000-0xfdebffff 64bit]
pci 0000:02:03.1: reg 1c: [mem 0xfde80000-0xfde9ffff 64bit]
pci 0000:02:03.1: reg 30: [mem 0x00000000-0x000fffff pref]
pci 0000:02:03.1: supports D1 D2
pci 0000:00:1c.0: PCI bridge to [bus 02-04]
pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.0:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:01:02.0: [14e4:1654] type 00 class 0x020000
pci 0000:01:02.0: reg 10: [mem 0xfddf0000-0xfddfffff 64bit]
pci 0000:01:02.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:02.0: PME# supported from D3hot D3cold
pci 0000:01:03.0: [1002:4752] type 00 class 0x030000
pci 0000:01:03.0: reg 10: [mem 0xfc000000-0xfcffffff]
pci 0000:01:03.0: reg 14: [io  0x3000-0x30ff]
pci 0000:01:03.0: reg 18: [mem 0xfbff0000-0xfbff0fff]
pci 0000:01:03.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:03.0: supports D1 D2
pci 0000:01:04.0: [0e11:00d7] type 00 class 0x088000
pci 0000:01:04.0: reg 10: [io  0x1800-0x18ff]
pci 0000:01:04.0: reg 14: [mem 0xfbfe0000-0xfbfe01ff]
pci 0000:01:04.0: reg 18: [io  0x1900-0x19ff]
pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x1000-0x3fff]
pci 0000:00:1e.0:   bridge window [mem 0xfbf00000-0xfddfffff]
pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11) *3
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11) *3
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *3
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *3
acpi root: \\_SB_.PCI0 notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:03.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:1d.0: address space collision: [io  0x2000-0x201f] conflicts with PCI Bus 0000:01 [io  0x1000-0x3fff]
pci 0000:00:1d.1: address space collision: [io  0x2020-0x203f] conflicts with PCI Bus 0000:01 [io  0x1000-0x3fff]
e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
e820: reserve RAM buffer [mem 0x3fff3000-0x3fffffff]
Switching to clocksource refined-jiffies
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: disabling [io  0x0010-0x001f] because it overlaps 0000:00:1d.0 BAR 4 [io  0x0000-0x001f]
pnp 00:00: disabling [io  0x0010-0x001f disabled] because it overlaps 0000:00:1d.1 BAR 4 [io  0x0000-0x001f]
system 00:00: [io  0x0408-0x040f] has been reserved
system 00:00: [io  0x04d0-0x04d1] has been reserved
system 00:00: [io  0x0500-0x050f] has been reserved
system 00:00: [io  0x0700-0x071f] has been reserved
system 00:00: [io  0x0800-0x083f] has been reserved
system 00:00: [io  0x0900-0x097f] has been reserved
system 00:00: [io  0x0c80-0x0c83] has been reserved
system 00:00: [io  0x0cd4-0x0cd7] has been reserved
system 00:00: [io  0x0f50-0x0f58] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 7]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:06: [dma 0]
pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PNP0500 (disabled)
pnp 00:09: [dma 2]
pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
Switching to clocksource acpi_pm
pci 0000:00:02.0: BAR 9: assigned [mem 0x40000000-0x400fffff pref]
pci 0000:00:1c.0: BAR 9: assigned [mem 0x40100000-0x402fffff pref]
pci 0000:00:1e.0: BAR 9: assigned [mem 0x40300000-0x403fffff pref]
pci 0000:00:1f.1: BAR 5: assigned [mem 0x40400000-0x404003ff]
pci 0000:00:1d.0: BAR 4: assigned [io  0x6000-0x601f]
pci 0000:00:1d.1: BAR 4: assigned [io  0x6020-0x603f]
pci 0000:05:00.2: BAR 9: assigned [mem 0x40000000-0x400fffff pref]
pci 0000:05:00.0: PCI bridge to [bus 06-08]
pci 0000:09:02.0: BAR 6: assigned [mem 0x40000000-0x4003ffff pref]
pci 0000:05:00.2: PCI bridge to [bus 09-0c]
pci 0000:05:00.2:   bridge window [io  0x5000-0x5fff]
pci 0000:05:00.2:   bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:05:00.2:   bridge window [mem 0x40000000-0x400fffff pref]
pci 0000:00:02.0: PCI bridge to [bus 05-0c]
pci 0000:00:02.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:02.0:   bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:02.0:   bridge window [mem 0x40000000-0x400fffff pref]
pci 0000:00:04.0: PCI bridge to [bus 0d-0f]
pci 0000:00:06.0: PCI bridge to [bus 10-12]
pci 0000:02:03.0: BAR 6: assigned [mem 0x40100000-0x401fffff pref]
pci 0000:02:03.1: BAR 6: assigned [mem 0x40200000-0x402fffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-04]
pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.0:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:1c.0:   bridge window [mem 0x40100000-0x402fffff pref]
pci 0000:01:03.0: BAR 6: assigned [mem 0x40300000-0x4031ffff pref]
pci 0000:01:02.0: BAR 6: assigned [mem 0x40320000-0x4032ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 01]
pci 0000:00:1e.0:   bridge window [io  0x1000-0x3fff]
pci 0000:00:1e.0:   bridge window [mem 0xfbf00000-0xfddfffff]
pci 0000:00:1e.0:   bridge window [mem 0x40300000-0x403fffff pref]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:05: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:05: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:05: resource 2 [mem 0x40000000-0x400fffff pref]
pci_bus 0000:09: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:09: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:09: resource 2 [mem 0x40000000-0x400fffff pref]
pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:02: resource 2 [mem 0x40100000-0x402fffff pref]
pci_bus 0000:01: resource 0 [io  0x1000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xfbf00000-0xfddfffff]
pci_bus 0000:01: resource 2 [mem 0x40300000-0x403fffff pref]
pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
pci_bus 0000:01: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:1d.5: disabled boot interrupts on device [8086:25ac]
pci 0000:05:00.0: rerouting interrupts for [8086:0329]
pci 0000:05:00.2: rerouting interrupts for [8086:032a]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 29712k freed
platform rtc_cmos: registered platform RTC device (no PNP device found)
camellia-x86_64: performance on this CPU would be suboptimal: disabling camellia-x86_64.
audit: initializing netlink socket (disabled)
type=2000 audit(1425998966.735:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.30 [Flags: R/W].
ROMFS MTD (C) 2007 Red Hat, Inc.
JFS: nTxBlock = 7883, nTxLock = 63070
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
bio: create slab at 1
Btrfs loaded
msgmni has been set to 1970
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
ioapic: probe of 0000:00:1d.5 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
GHES: HEST is not enabled!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 00:08: unable to assign resources
serial: probe of 00:08 failed with error -16
Floppy drive(s): fd0 is 1.44M
brd: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.26)
cciss 0000:09:02.0: PCI IRQ 72 -> rerouted to legacy IRQ 16
cciss 0000:09:02.0: Controller reports max supported commands of 0, an obvious lie. Using 16.  Ensure that firmware is up to date.
FDC 0 is a National Semiconductor PC87306
cciss 0000:09:02.0: cciss0: <0x46> at PCI 0000:09:02.0 IRQ 16 using DAC
 cciss/c0d0: unknown partition table
scsi0 : cciss
fnic: Cisco FCoE HBA Driver, ver 1.5.0.22
fnic: Successfully Initialized Trace Buffer
Adaptec aacraid driver 1.2-0[30200]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: Detection failed (no card)
qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.05.00.03-k.
Emulex LightPulse Fibre Channel SCSI driver 8.3.39
Copyright(c) 2004-2009 Emulex.  All rights reserved.
Brocade BFA FC/FCOE SCSI driver - version: 3.1.2.1
DC390: clustering now enabled by default. If you get problems load
       with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013
mpt2sas version 14.100.00.00 loaded
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
ipr: IBM Power RAID SCSI Device Driver version: 2.6.0 (November 16, 2012)
RocketRAID 3xxx/4xxx Controller driver v1.8
stex: Promise SuperTrak EX Driver version: 4.6.0000.4
st: Version 20101219, fixed bufsize 32768, s/g segs 256
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ata_piix 0000:00:1f.1: can't derive routing for PCI INT A
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 C0: Capabilities={Initiator,Target}
ata2.00: ATAPI: HL-DT-ST CD-ROM GCR-8482B, 2.09, max UDMA/33
ata2.00: configured for UDMA/33
scsi 2:0:0:0: CD-ROM            HL-DT-ST CD-ROM GCR-8482B 2.09 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
scsi3 : ioc0: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=24
tsc: Refined TSC clocksource calibration: 3000.106 MHz
Switching to clocksource tsc
scsi 3:0:3:0: CD-ROM            HP       C7438A           V312 PQ: 0 ANSI: 3
scsi target3:0:3: Beginning Domain Validation
scsi target3:0:3: Domain Validation skipping write tests
scsi target3:0:3: Ending Domain Validation
scsi target3:0:3: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 32)
sr1: scsi-1 drive
sr 3:0:3:0: Attached scsi CD-ROM sr1
mptbase: ioc1: Initiating bringup
ioc1: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi4 : ioc1: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=25
Fusion MPT FC Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
Fusion MPT misc device (ioctl) driver 3.04.20
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT LAN driver 3.04.20
mptlan: ioc0: PortNum=0, ProtocolFlags=0Ch (ITlb)
mptlan: ioc0: Hmmm... LAN protocol seems to be disabled on this adapter port!
mptlan: ioc1: PortNum=0, ProtocolFlags=0Ch (ITlb)
mptlan: ioc1: Hmmm... LAN protocol seems to be disabled on this adapter port!
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
input: Speakup as /devices/virtual/input/input0
initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
speakup 3.1.6: initialized
synth name on entry is: (null)
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Key type dns_resolver registered
registered taskstats version 1
Freeing unused kernel memory: 1272k freed
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 552k freed
Freeing unused kernel memory: 792k freed
loop: module loaded
>udevd[158]: starting version 182
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.17 uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006020
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.17

Offline Paweł Kraszewski

  • Administrator
  • Guru
  • *****
  • Wiadomości: 3049
  • Lenistwo jest matką potrzeby = babcią wynalazku
    • Zobacz profil
SLACKWARE 14.1 na RAID 5 [SOLVED]
« Odpowiedź #2 dnia: 2015-03-10, 16:39:23 »
Z tego co widzę działa, a urządzenie nazywa się /dev/cciss/c0d0 (na tym robisz fdisk). Partycje będą się nazywać c0d0p0, c0d0p1, itd.
Paweł Kraszewski
~Arch/Void/Gentoo/FreeBSD/OpenBSD/Specjalizowane customy

Disc

  • Gość
SLACKWARE 14.1 na RAID 5 [SOLVED]
« Odpowiedź #3 dnia: 2015-03-11, 08:19:48 »
Serdecznie dziękuję. Faktycznie działa. Pierwsze moje spotkanie z macierzą - stąd brak doświadczenia. Jeszcze raz dzięki :) :) :)

Offline Paweł Kraszewski

  • Administrator
  • Guru
  • *****
  • Wiadomości: 3049
  • Lenistwo jest matką potrzeby = babcią wynalazku
    • Zobacz profil
SLACKWARE 14.1 na RAID 5 [SOLVED]
« Odpowiedź #4 dnia: 2015-03-11, 13:48:52 »
Na ogół macierze emulują zwykłe dyski SCSI (czyli kolejne wolumeny logiczne RAID-a sprzętowego są widoczne jako /dev/sda, /dev/sdb, itd). Ale niektóre RAID-y niestety zakładają własną hierarchię urządzeń i pomoże tylko uważne prześledzenie dmesg-a.

Cieszę się, że mogłem pomóc. Zamykam wątek.
Paweł Kraszewski
~Arch/Void/Gentoo/FreeBSD/OpenBSD/Specjalizowane customy