Nowe posty

xx Dystrybucja pod HP Omen (6)
Wczoraj o 23:30:08
xx [Poradnik] Wyszukiwanie Sterowników (2)
Wczoraj o 21:08:23
lamp Problem z Linux Lite po instalacji (0)
Wczoraj o 19:50:30
xx Ile pingwinów? (1)
Wczoraj o 08:59:24
xx konfiguracja pale moon (0)
2024-03-24, 21:53:42
xx Plasma 6 w Neonie ssie trochę mniej ... (10)
2024-03-23, 02:38:11
xx problem z instalacja sterowników do karty sieciowej (3)
2024-03-18, 18:10:16
xx Plik abc.001 (1)
2024-03-17, 17:48:27
xx Zlecę dopracowanie programu w MatLab (0)
2024-03-13, 15:28:40
xx Linux Mint 21.3 XFCE brak dźwieku po paru minutach (karta muzyczna zintegrowana) (5)
2024-03-12, 23:07:01

Autor Wątek: Mysz  (Przeczytany 4334 razy)

baklazann

  • Gość
Mysz
« dnia: 2014-08-26, 21:54:18 »
witam, kupiłem w markecie bezprzewodową  myszkę "noname" i nie chce mi działać pod mintem. Może ktoś z was wie jak ją uruchomić??

Offline mateo86

  • Users
  • Guru
  • *****
  • Wiadomości: 647
    • Zobacz profil
Mysz
« Odpowiedź #1 dnia: 2014-08-26, 23:35:00 »
Podłącz ją do innego portu i sprawdź, czy tam też nie działa.
Sprawdź w innym komputerze, jeśli masz możliwość.
Na koniec wklej tu w znacznikach code polecenie

lsusb

baklazann

  • Gość
Mysz
« Odpowiedź #2 dnia: 2014-08-26, 23:46:32 »
Sprawdzałem na wszystkich portach usb na swoim kompie i nic. Na drugim komputerze gdzie jest ubuntu tez nie działa.

Bus 002 Device 013: ID 248a:0568  
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 5986:0149 Acer, Inc
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

baklazann

  • Gość
Mysz
« Odpowiedź #3 dnia: 2014-08-27, 20:01:17 »
no i nikt nic więcej nie pomoże??

Offline 1709

  • Users
  • Guru
  • *****
  • Wiadomości: 2763
  • 1709
    • Zobacz profil
Mysz
« Odpowiedź #4 dnia: 2014-08-27, 22:26:55 »
ona jest na Bluetooth? Bluetooth masz zainstalowany ?
PS: Brak polskiej czcionki, nie jest to brak lenistwa, a jej brak w systemie i brak czasu na reczne poprawki.

Offline ultr

  • Users
  • Guru
  • *****
  • Wiadomości: 1177
    • Zobacz profil
Mysz
« Odpowiedź #5 dnia: 2014-08-27, 22:54:07 »
Zobacz jeszcze polecenie `dmesg`. Jakie linie zostaną dodane w logu przy podłączeniu i odłączeniu myszy?
Podłączenie:
[895148.808025] usb 6-2: new low-speed USB device number 4 using uhci_hcd
[895149.186040] usb 6-2: New USB device found, idVendor=093a, idProduct=2510
[895149.186045] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[895149.186047] usb 6-2: Product: USB OPTICAL MOUSE
[895149.186049] usb 6-2: Manufacturer: PIXART
[895149.213952] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:093A:2510.0004/input/input17
[895149.214118] hid-generic 0003:093A:2510.0004: input,hidraw3: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.0-2/input0
Odłączenie:
[895152.444086] usb 6-2: USB disconnect, device number 4
Poza tym powiedz dokładnie co to za myszka. Link do produktu?

baklazann

  • Gość
Mysz
« Odpowiedź #6 dnia: 2014-08-28, 00:54:20 »
Laptop to hp g62 i wcześniej miałem podpiętą bezprzewodową mysz optyczną hp która działa bez problemów, teraz ta z marketu to vakoss model TM-655UX
podpięta:
use it instead of the native driver
[    8.983636] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \\GPIO 1 (20131115/utaddress-251)
[    8.983641] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \\_SB_.PCI0.P0P2.PEGP.GPIO 2 (20131115/utaddress-251)
[    8.983646] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \\_GPE.GPIO 3 (20131115/utaddress-251)
[    8.983650] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.983652] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \\GPIO 1 (20131115/utaddress-251)
[    8.983657] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \\_SB_.PCI0.P0P2.PEGP.GPIO 2 (20131115/utaddress-251)
[    8.983662] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \\_GPE.GPIO 3 (20131115/utaddress-251)
[    8.983666] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.983668] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.227944] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[    9.227984] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[    9.228017] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[    9.228082] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[    9.231960] wmi: Mapper loaded
[    9.240075] bcma: bus0: Bus registered
[    9.267661] [drm] Initialized drm 1.1.0 20060810
[    9.363815] kvm: disabled by bios
[    9.483997] Linux video capture interface: v2.00
[    9.488446] input: HP WMI hotkeys as /devices/virtual/input/input17
[    9.585573] uvcvideo: Found UVC 1.00 device HP Webcam-101 (5986:0149)
[    9.588396] input: HP Webcam-101 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input18
[    9.588504] usbcore: registered new interface driver uvcvideo
[    9.588506] USB Video Class driver (1.1.1)
[    9.644466] [drm] Memory usable by graphics device = 2048M
[    9.644472] checking generic (b0000000 300000) vs hw (b0000000 10000000)
[    9.644474] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    9.644497] Console: switching to colour dummy device 80x25
[    9.655632] cfg80211: Calling CRDA to update world regulatory domain
[    9.690180] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[    9.690211] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.690213] [drm] Driver supports precise vblank timestamp query.
[    9.690431] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[    9.724189] fbcon: inteldrmfb (fb0) is primary device
[    9.775672] [drm] radeon kernel modesetting enabled.
[    9.775693] VGA switcheroo: detected switching method \\_SB_.PCI0.GFX0.ATPX handle
[    9.832148] WARNING! power/level is deprecated; use power/control instead
[    9.981280] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[    9.981284] b43: probe of bcma0:0 failed with error -524
[    9.981313] Broadcom 43xx driver loaded [ Features: PNL ]
[   10.294529] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   10.363361] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 18
[   10.414306] Console: switching to colour frame buffer device 170x48
[   10.417452] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   10.417454] i915 0000:00:02.0: registered panic notifier
[   10.417476] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[   10.418174] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   10.419123] acpi device:02: registered as cooling_device5
[   10.419249] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input19
[   10.419375] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   10.420016] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[   10.420540] acpi device:0b: registered as cooling_device6
[   10.420601] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input20
[   10.420727] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[   10.420828] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   10.421111] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   10.421267] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E0 0x103C:0x143A).
[   10.421292] [drm] register mmio base: 0xC4400000
[   10.421294] [drm] register mmio size: 131072
[   10.421297] vga_switcheroo: enabled
[   10.421357] ATPX version 1, functions 0x000000bf
[   10.452211] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.452617] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 243
[   10.602797] SKU: Nid=0x1d sku_cfg=0x40179a2d
[   10.602802] SKU: port_connectivity=0x1
[   10.602804] SKU: enable_pcbeep=0x1
[   10.602805] SKU: check_sum=0x00000007
[   10.602807] SKU: customization=0x0000009a
[   10.602808] SKU: external_amp=0x5
[   10.602810] SKU: platform_type=0x1
[   10.602811] SKU: swap=0x0
[   10.602812] SKU: override=0x1
[   10.603072] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   10.603075]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.603077]    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   10.603079]    mono: mono_out=0x0
[   10.603080]    inputs:
[   10.603083]      Internal Mic=0x19
[   10.603084]      Mic=0x18
[   10.603087] realtek: No valid SSID, checking pincfg 0x40179a2d for NID 0x1d
[   10.603089] realtek: Enabling init ASM_ID=0x9a2d CODEC_ID=10ec0270
[   10.608948] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[   10.612964] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[   11.059171] cfg80211: World regulatory domain updated:
[   11.059176] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.059178] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.059180] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.059182] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   11.059183] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.059185] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.059199] cfg80211: Calling CRDA for country: US
[   11.062839] cfg80211: Regulatory domain changed to country: US
[   11.062842] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.062845] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   11.062846] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   11.062848] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.062849] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.062851] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.062852] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   11.062854] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[   11.611865] ATOM BIOS: HP
[   11.611946] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[   11.611950] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[   11.611953] [drm] Detected VRAM RAM=512M, BAR=256M
[   11.611955] [drm] RAM width 64bits DDR
[   11.612029] [TTM] Zone  kernel: Available graphics memory: 1437188 kiB
[   11.612031] [TTM] Initializing pool allocator
[   11.612038] [TTM] Initializing DMA pool allocator
[   11.612065] [drm] radeon: 512M of VRAM memory ready
[   11.612067] [drm] radeon: 1024M of GTT memory ready.
[   11.612086] [drm] Loading CEDAR Microcode
[   11.900756] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   11.904881] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[   11.905030] radeon 0000:01:00.0: WB enabled
[   11.905034] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88009439fc00
[   11.905036] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88009439fc0c
[   11.905787] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000911c418
[   11.905790] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   11.905792] [drm] Driver supports precise vblank timestamp query.
[   11.905823] radeon 0000:01:00.0: irq 46 for MSI/MSI-X
[   11.905842] radeon 0000:01:00.0: radeon: using MSI.
[   11.905878] [drm] radeon: irq initialized.
[   11.923115] [drm] ring test on 0 succeeded in 1 usecs
[   11.923183] [drm] ring test on 3 succeeded in 1 usecs
[   12.109565] [drm] ring test on 5 succeeded in 1 usecs
[   12.109578] [drm] UVD initialized successfully.
[   12.109929] [drm] Enabling audio 0 support
[   12.109973] [drm] ib test on ring 0 succeeded in 0 usecs
[   12.110010] [drm] ib test on ring 3 succeeded in 0 usecs
[   12.260750] [drm] ib test on ring 5 succeeded
[   12.318727] [drm] radeon atom DIG backlight initialized
[   12.318735] [drm] Radeon Display Connectors
[   12.318740] [drm] Connector 0:
[   12.318742] [drm]   LVDS-2
[   12.318744] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[   12.318746] [drm]   Encoders:
[   12.318747] [drm]     LCD1: INTERNAL_UNIPHY
[   12.318748] [drm] Connector 1:
[   12.318749] [drm]   HDMI-A-1
[   12.318750] [drm]   HPD1
[   12.318752] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[   12.318753] [drm]   Encoders:
[   12.318754] [drm]     DFP1: INTERNAL_UNIPHY1
[   12.318755] [drm] Connector 2:
[   12.318756] [drm]   VGA-2
[   12.318758] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   12.318759] [drm]   Encoders:
[   12.318760] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   12.334931] [drm] Internal thermal controller with fan control
[   12.348428] [drm] radeon: dpm initialized
[   12.377321] [drm] fb mappable at 0xA045E000
[   12.377325] [drm] vram apper at 0xA0000000
[   12.377327] [drm] size 4325376
[   12.377329] [drm] fb depth is 24
[   12.377331] [drm]    pitch is 5632
[   12.377469] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
[   12.377498] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 1
[   12.377711] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   12.377715] hda-intel 0000:01:00.1: Using LPIB position fix
[   12.377769] snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X
[   12.389509] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[   12.431925] HDMI ATI/AMD: no speaker allocation for ELD
[   12.432023] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
[   14.218046] type=1400 audit(1409176303.149:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=483 comm="apparmor_parser"
[   14.218055] type=1400 audit(1409176303.149:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=483 comm="apparmor_parser"
[   14.218060] type=1400 audit(1409176303.149:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=483 comm="apparmor_parser"
[   14.218315] type=1400 audit(1409176303.149:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=411 comm="apparmor_parser"
[   14.218325] type=1400 audit(1409176303.149:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=411 comm="apparmor_parser"
[   14.218332] type=1400 audit(1409176303.149:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=411 comm="apparmor_parser"
[   14.218341] type=1400 audit(1409176303.149:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=410 comm="apparmor_parser"
[   14.218349] type=1400 audit(1409176303.149:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=410 comm="apparmor_parser"
[   14.218355] type=1400 audit(1409176303.149:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=410 comm="apparmor_parser"
[   14.218554] type=1400 audit(1409176303.149:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=483 comm="apparmor_parser"
[   14.280958] init: avahi-cups-reload main process (611) terminated with status 1
[   14.609929] Bluetooth: Core ver 2.17
[   14.609983] NET: Registered protocol family 31
[   14.609985] Bluetooth: HCI device and connection manager initialized
[   14.609998] Bluetooth: HCI socket layer initialized
[   14.610001] Bluetooth: L2CAP socket layer initialized
[   14.610006] Bluetooth: SCO socket layer initialized
[   14.947925] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.947930] Bluetooth: BNEP filters: protocol multicast
[   14.947944] Bluetooth: BNEP socket layer initialized
[   14.951495] Bluetooth: RFCOMM TTY layer initialized
[   14.951507] Bluetooth: RFCOMM socket layer initialized
[   14.951512] Bluetooth: RFCOMM ver 1.11
[   15.685408] init: failsafe main process (622) killed by TERM signal
[   17.963957] hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
[   18.185229] [drm] Disabling audio 0 support
[   19.069414] r8169 0000:02:00.0 eth0: link down
[   19.069451] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.069802] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.191637] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   19.191724] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[   19.192034] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.192649] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.060757] wlan0: authenticate with 10:fe:ed:c7:5a:20
[   20.062633] wlan0: send auth to 10:fe:ed:c7:5a:20 (try 1/3)
[   20.066224] wlan0: authenticated
[   20.068442] wlan0: associate with 10:fe:ed:c7:5a:20 (try 1/3)
[   20.072332] wlan0: RX AssocResp from 10:fe:ed:c7:5a:20 (capab=0x431 status=0 aid=1)
[   20.073002] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[   20.073070] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   20.073147] wlan0: associated
[   20.073161] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   20.073405] cfg80211: Calling CRDA for country: PL
[   20.076879] cfg80211: Regulatory domain changed to country: PL
[   20.076883] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   20.076885] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   20.076887] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   20.076889] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   20.076890] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[   20.076891] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[   21.147811] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[   24.628408] audit_printk_skb: 36 callbacks suppressed
[   24.628412] type=1400 audit(1409176313.557:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=958 comm="apparmor_parser"
[   24.628420] type=1400 audit(1409176313.557:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=958 comm="apparmor_parser"
[   24.628425] type=1400 audit(1409176313.557:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=958 comm="apparmor_parser"
[   24.628910] type=1400 audit(1409176313.557:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=958 comm="apparmor_parser"
[   24.628914] type=1400 audit(1409176313.557:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=958 comm="apparmor_parser"
[   24.629165] type=1400 audit(1409176313.557:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=958 comm="apparmor_parser"
[   24.633480] type=1400 audit(1409176313.565:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=962 comm="apparmor_parser"
[   24.638721] type=1400 audit(1409176313.569:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=963 comm="apparmor_parser"
[   24.638731] type=1400 audit(1409176313.569:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=963 comm="apparmor_parser"
[   24.639228] type=1400 audit(1409176313.569:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=963 comm="apparmor_parser"
[   25.358035] init: alsa-restore main process (1075) terminated with status 99
[   27.837174] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[   27.837299] radeon 0000:01:00.0: WB enabled
[   27.837303] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88009439fc00
[   27.837306] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88009439fc0c
[   27.838054] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000911c418
[   27.854700] [drm] ring test on 0 succeeded in 1 usecs
[   27.854762] [drm] ring test on 3 succeeded in 1 usecs
[   28.051033] [drm] ring test on 5 succeeded in 1 usecs
[   28.051044] [drm] UVD initialized successfully.
[   28.051048] [drm] Enabling audio 0 support
[   28.051096] [drm] ib test on ring 0 succeeded in 0 usecs
[   28.051135] [drm] ib test on ring 3 succeeded in 1 usecs
[   28.211766] [drm] ib test on ring 5 succeeded
[   28.245183] hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
[   28.245378] snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X
[   28.247902] HDMI ATI/AMD: no speaker allocation for ELD
[   28.546522] HDMI ATI/AMD: no speaker allocation for ELD
[   28.846585] HDMI ATI/AMD: no speaker allocation for ELD
[   29.146676] HDMI ATI/AMD: no speaker allocation for ELD
[   29.446714] HDMI ATI/AMD: no speaker allocation for ELD
[   29.746728] HDMI ATI/AMD: no speaker allocation for ELD
[   30.046740] HDMI ATI/AMD: no speaker allocation for ELD
[   30.347009] HDMI ATI/AMD: no speaker allocation for ELD
[   30.602907] init: plymouth-upstart-bridge main process ended, respawning
[   30.610682] init: plymouth-upstart-bridge main process (1213) terminated with status 1
[   30.610704] init: plymouth-upstart-bridge main process ended, respawning
[   30.647206] HDMI ATI/AMD: no speaker allocation for ELD
[   39.678441] audit_printk_skb: 111 callbacks suppressed
[   39.678446] type=1400 audit(1409176328.600:71): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/etc/dconf/profile/gdm" pid=1453 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=115 ouid=0
[   73.794642] brcmsmac bcma0:0: START: tid 1 is not agg'able
[   90.799138] usb 2-1.2: new high-speed USB device number 4 using ehci-pci
[   90.892774] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6034
[   90.892783] usb 2-1.2: New USB device strings: Mfr=1, Product=11, SerialNumber=3
[   90.892788] usb 2-1.2: Product: Samsung G2 Portable
[   90.892793] usb 2-1.2: Manufacturer: JMicron
[   90.892797] usb 2-1.2: SerialNumber: 00000011E1890
[   90.994844] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[   90.994927] scsi4 : usb-storage 2-1.2:1.0
[   90.995025] usbcore: registered new interface driver usb-storage
[   92.011383] scsi 4:0:0:0: Direct-Access     Samsung  G2 Portable           PQ: 0 ANSI: 2 CCS
[   92.011857] sd 4:0:0:0: Attached scsi generic sg2 type 0
[   92.012512] sd 4:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[   92.013623] sd 4:0:0:0: [sdb] Write Protect is off
[   92.013634] sd 4:0:0:0: [sdb] Mode Sense: 3c 00 00 00
[   92.018836] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   92.056114]  sdb: sdb1
[   92.083446] sd 4:0:0:0: [sdb] Attached SCSI disk
[  303.941805] brcmsmac bcma0:0: START: tid 1 is not agg'able
[  304.454161] brcmsmac bcma0:0: START: tid 1 is not agg'able
[  389.934248] init: upstart-udev-bridge main process (296) terminated with status 1
[  389.934267] init: upstart-udev-bridge main process ended, respawning
[  389.934471] init: upstart-file-bridge main process (524) terminated with status 1
[  389.934488] init: upstart-file-bridge main process ended, respawning
[  389.934688] init: upstart-socket-bridge main process (637) terminated with status 1
[  389.934704] init: upstart-socket-bridge main process ended, respawning
[  415.559222] init: systemd-logind main process (548) killed by TERM signal
[  544.176476] brcmsmac bcma0:0: START: tid 1 is not agg'able
[  615.132770] perf samples too long (2515 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[  752.886121] systemd-udevd[7150]: starting version 204
[  810.948367] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[  811.001073] JFS: nTxBlock = 8192, nTxLock = 65536
[  811.079506] NTFS driver 2.1.30 [Flags: R/O MODULE].
[  811.124949] QNX4 filesystem 0.2.3 registered.
[  811.154117] xor: measuring software checksum speed
[  811.193716]    prefetch64-sse:  7228.000 MB/sec
[  811.233728]    generic_sse:  7724.000 MB/sec
[  811.233736] xor: using function: generic_sse (7724.000 MB/sec)
[  811.301725] raid6: sse2x1    5055 MB/s
[  811.369734] raid6: sse2x2    6003 MB/s
[  811.437782] raid6: sse2x4    6628 MB/s
[  811.437787] raid6: using algorithm sse2x4 (6628 MB/s)
[  811.437789] raid6: using ssse3x2 recovery algorithm
[  811.807959] bio: create slab at 1
[  811.810644] Btrfs loaded
[  836.497001] usb 2-1.3: USB disconnect, device number 3
[  840.792566] usb 2-1.3: new full-speed USB device number 5 using ehci-pci
[  840.888613] usb 2-1.3: New USB device found, idVendor=248a, idProduct=0568
[  840.888624] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  840.888629] usb 2-1.3: Product: Wireless Receiver
[  840.888634] usb 2-1.3: Manufacturer: Telink
[  840.891349] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input24
[  840.891637] hid-generic 0003:248A:0568.0002: input,hidraw0: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-0000:00:1d.0-1.3/input0
[  840.894502] hid (null): usage index exceeded
[  840.894801] hid-generic 0003:248A:0568.0003: usage index exceeded
[  840.894806] hid-generic 0003:248A:0568.0003: item 0 2 2 2 parsing failed
[  840.894821] hid-generic: probe of 0003:248A:0568.0003 failed with error -22
[  872.089089] usb 2-1.3: USB disconnect, device number 5
[  874.952214] brcmsmac bcma0:0: START: tid 1 is not agg'able
[  877.412942] usb 2-1.1: new full-speed USB device number 6 using ehci-pci
[  877.508947] usb 2-1.1: New USB device found, idVendor=248a, idProduct=0568
[  877.508957] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  877.508962] usb 2-1.1: Product: Wireless Receiver
[  877.508967] usb 2-1.1: Manufacturer: Telink
[  877.511323] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input25
[  877.511590] hid-generic 0003:248A:0568.0004: input,hidraw0: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-0000:00:1d.0-1.1/input0
[  877.514420] hid (null): usage index exceeded
[  877.514845] hid-generic 0003:248A:0568.0005: usage index exceeded
[  877.514851] hid-generic 0003:248A:0568.0005: item 0 2 2 2 parsing failed
[  877.514871] hid-generic: probe of 0003:248A:0568.0005 failed with error -22
[  879.770845] usb 2-1.1: USB disconnect, device number 6
[  886.371006] usb 2-1.1: new low-speed USB device number 7 using ehci-pci
[  886.469654] usb 2-1.1: New USB device found, idVendor=03f0, idProduct=8207
[  886.469664] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  886.469670] usb 2-1.1: Product: Wireless Optical Mobile Mouse
[  886.469675] usb 2-1.1: Manufacturer: HP
[  886.474176] input: HP Wireless Optical Mobile Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input26
[  886.474469] hid-generic 0003:03F0:8207.0006: input,hidraw0: USB HID v1.00 Mouse [HP Wireless Optical Mobile Mouse] on usb-0000:00:1d.0-1.1/input0
[  890.980032] usb 2-1.3: new high-speed USB device number 8 using ehci-pci
[  891.076573] usb 2-1.3: New USB device found, idVendor=0951, idProduct=1653
[  891.076581] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  891.076587] usb 2-1.3: Product: DT 100 G2
[  891.076592] usb 2-1.3: Manufacturer: Kingston
[  891.076596] usb 2-1.3: SerialNumber: 001D6095C756FC70354523DC
[  891.077100] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[  891.077239] scsi5 : usb-storage 2-1.3:1.0
[  892.215549] scsi 5:0:0:0: Direct-Access     Kingston DT 100 G2        1.00 PQ: 0 ANSI: 4
[  892.216005] sd 5:0:0:0: Attached scsi generic sg3 type 0
[  892.216663] sd 5:0:0:0: [sdc] 15131636 512-byte logical blocks: (7.74 GB/7.21 GiB)
[  892.217271] sd 5:0:0:0: [sdc] Write Protect is off
[  892.217278] sd 5:0:0:0: [sdc] Mode Sense: 45 00 00 00
[  892.217883] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  892.224805]  sdc: sdc1 sdc2
[  892.227656] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[  892.612306] ISO 9660 Extensions: Microsoft Joliet Level 3
[  892.656410] ISO 9660 Extensions: RRIP_1991A
[  921.682967] brcmsmac bcma0:0: START: tid 1 is not agg'able
[  922.347141] brcmsmac bcma0:0: START: tid 1 is not agg'able
[  923.163212] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 1155.320068] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 1590.918908] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 1601.825307] brcmsmac bcma0:0: START: tid 2 is not agg'able
[ 2165.183391] usb 2-1.2: USB disconnect, device number 4
[ 2166.975800] usb 2-1.3: USB disconnect, device number 8
[ 2346.738077] perf samples too long (5004 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[ 2544.751396] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 2544.891317] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 2545.199417] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 2545.363462] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 3544.569064] usb 2-1.1: USB disconnect, device number 7
[ 3559.877813] usb 2-1.1: new full-speed USB device number 9 using ehci-pci
[ 3559.973753] usb 2-1.1: New USB device found, idVendor=248a, idProduct=0568
[ 3559.973759] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3559.973762] usb 2-1.1: Product: Wireless Receiver
[ 3559.973765] usb 2-1.1: Manufacturer: Telink
[ 3559.975994] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input27
[ 3559.976282] hid-generic 0003:248A:0568.0007: input,hidraw0: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-0000:00:1d.0-1.1/input0
[ 3559.979120] hid (null): usage index exceeded
[ 3559.979554] hid-generic 0003:248A:0568.0008: usage index exceeded
[ 3559.979561] hid-generic 0003:248A:0568.0008: item 0 2 2 2 parsing failed
[ 3559.979582] hid-generic: probe of 0003:248A:0568.0008 failed with error -22
odłączona:
[    8.983636] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \\GPIO 1 (20131115/utaddress-251)
[    8.983641] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \\_SB_.PCI0.P0P2.PEGP.GPIO 2 (20131115/utaddress-251)
[    8.983646] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \\_GPE.GPIO 3 (20131115/utaddress-251)
[    8.983650] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.983652] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \\GPIO 1 (20131115/utaddress-251)
[    8.983657] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \\_SB_.PCI0.P0P2.PEGP.GPIO 2 (20131115/utaddress-251)
[    8.983662] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \\_GPE.GPIO 3 (20131115/utaddress-251)
[    8.983666] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.983668] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.227944] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[    9.227984] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[    9.228017] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[    9.228082] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[    9.231960] wmi: Mapper loaded
[    9.240075] bcma: bus0: Bus registered
[    9.267661] [drm] Initialized drm 1.1.0 20060810
[    9.363815] kvm: disabled by bios
[    9.483997] Linux video capture interface: v2.00
[    9.488446] input: HP WMI hotkeys as /devices/virtual/input/input17
[    9.585573] uvcvideo: Found UVC 1.00 device HP Webcam-101 (5986:0149)
[    9.588396] input: HP Webcam-101 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input18
[    9.588504] usbcore: registered new interface driver uvcvideo
[    9.588506] USB Video Class driver (1.1.1)
[    9.644466] [drm] Memory usable by graphics device = 2048M
[    9.644472] checking generic (b0000000 300000) vs hw (b0000000 10000000)
[    9.644474] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    9.644497] Console: switching to colour dummy device 80x25
[    9.655632] cfg80211: Calling CRDA to update world regulatory domain
[    9.690180] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[    9.690211] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.690213] [drm] Driver supports precise vblank timestamp query.
[    9.690431] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[    9.724189] fbcon: inteldrmfb (fb0) is primary device
[    9.775672] [drm] radeon kernel modesetting enabled.
[    9.775693] VGA switcheroo: detected switching method \\_SB_.PCI0.GFX0.ATPX handle
[    9.832148] WARNING! power/level is deprecated; use power/control instead
[    9.981280] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[    9.981284] b43: probe of bcma0:0 failed with error -524
[    9.981313] Broadcom 43xx driver loaded [ Features: PNL ]
[   10.294529] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   10.363361] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 18
[   10.414306] Console: switching to colour frame buffer device 170x48
[   10.417452] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   10.417454] i915 0000:00:02.0: registered panic notifier
[   10.417476] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[   10.418174] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   10.419123] acpi device:02: registered as cooling_device5
[   10.419249] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input19
[   10.419375] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   10.420016] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[   10.420540] acpi device:0b: registered as cooling_device6
[   10.420601] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input20
[   10.420727] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[   10.420828] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   10.421111] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   10.421267] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E0 0x103C:0x143A).
[   10.421292] [drm] register mmio base: 0xC4400000
[   10.421294] [drm] register mmio size: 131072
[   10.421297] vga_switcheroo: enabled
[   10.421357] ATPX version 1, functions 0x000000bf
[   10.452211] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.452617] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 243
[   10.602797] SKU: Nid=0x1d sku_cfg=0x40179a2d
[   10.602802] SKU: port_connectivity=0x1
[   10.602804] SKU: enable_pcbeep=0x1
[   10.602805] SKU: check_sum=0x00000007
[   10.602807] SKU: customization=0x0000009a
[   10.602808] SKU: external_amp=0x5
[   10.602810] SKU: platform_type=0x1
[   10.602811] SKU: swap=0x0
[   10.602812] SKU: override=0x1
[   10.603072] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   10.603075]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.603077]    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   10.603079]    mono: mono_out=0x0
[   10.603080]    inputs:
[   10.603083]      Internal Mic=0x19
[   10.603084]      Mic=0x18
[   10.603087] realtek: No valid SSID, checking pincfg 0x40179a2d for NID 0x1d
[   10.603089] realtek: Enabling init ASM_ID=0x9a2d CODEC_ID=10ec0270
[   10.608948] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[   10.612964] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[   11.059171] cfg80211: World regulatory domain updated:
[   11.059176] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.059178] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.059180] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.059182] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   11.059183] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.059185] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.059199] cfg80211: Calling CRDA for country: US
[   11.062839] cfg80211: Regulatory domain changed to country: US
[   11.062842] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.062845] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   11.062846] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   11.062848] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.062849] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.062851] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.062852] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   11.062854] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[   11.611865] ATOM BIOS: HP
[   11.611946] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[   11.611950] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[   11.611953] [drm] Detected VRAM RAM=512M, BAR=256M
[   11.611955] [drm] RAM width 64bits DDR
[   11.612029] [TTM] Zone  kernel: Available graphics memory: 1437188 kiB
[   11.612031] [TTM] Initializing pool allocator
[   11.612038] [TTM] Initializing DMA pool allocator
[   11.612065] [drm] radeon: 512M of VRAM memory ready
[   11.612067] [drm] radeon: 1024M of GTT memory ready.
[   11.612086] [drm] Loading CEDAR Microcode
[   11.900756] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   11.904881] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[   11.905030] radeon 0000:01:00.0: WB enabled
[   11.905034] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88009439fc00
[   11.905036] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88009439fc0c
[   11.905787] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000911c418
[   11.905790] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   11.905792] [drm] Driver supports precise vblank timestamp query.
[   11.905823] radeon 0000:01:00.0: irq 46 for MSI/MSI-X
[   11.905842] radeon 0000:01:00.0: radeon: using MSI.
[   11.905878] [drm] radeon: irq initialized.
[   11.923115] [drm] ring test on 0 succeeded in 1 usecs
[   11.923183] [drm] ring test on 3 succeeded in 1 usecs
[   12.109565] [drm] ring test on 5 succeeded in 1 usecs
[   12.109578] [drm] UVD initialized successfully.
[   12.109929] [drm] Enabling audio 0 support
[   12.109973] [drm] ib test on ring 0 succeeded in 0 usecs
[   12.110010] [drm] ib test on ring 3 succeeded in 0 usecs
[   12.260750] [drm] ib test on ring 5 succeeded
[   12.318727] [drm] radeon atom DIG backlight initialized
[   12.318735] [drm] Radeon Display Connectors
[   12.318740] [drm] Connector 0:
[   12.318742] [drm]   LVDS-2
[   12.318744] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[   12.318746] [drm]   Encoders:
[   12.318747] [drm]     LCD1: INTERNAL_UNIPHY
[   12.318748] [drm] Connector 1:
[   12.318749] [drm]   HDMI-A-1
[   12.318750] [drm]   HPD1
[   12.318752] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[   12.318753] [drm]   Encoders:
[   12.318754] [drm]     DFP1: INTERNAL_UNIPHY1
[   12.318755] [drm] Connector 2:
[   12.318756] [drm]   VGA-2
[   12.318758] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   12.318759] [drm]   Encoders:
[   12.318760] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   12.334931] [drm] Internal thermal controller with fan control
[   12.348428] [drm] radeon: dpm initialized
[   12.377321] [drm] fb mappable at 0xA045E000
[   12.377325] [drm] vram apper at 0xA0000000
[   12.377327] [drm] size 4325376
[   12.377329] [drm] fb depth is 24
[   12.377331] [drm]    pitch is 5632
[   12.377469] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
[   12.377498] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 1
[   12.377711] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   12.377715] hda-intel 0000:01:00.1: Using LPIB position fix
[   12.377769] snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X
[   12.389509] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[   12.431925] HDMI ATI/AMD: no speaker allocation for ELD
[   12.432023] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
[   14.218046] type=1400 audit(1409176303.149:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=483 comm="apparmor_parser"
[   14.218055] type=1400 audit(1409176303.149:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=483 comm="apparmor_parser"
[   14.218060] type=1400 audit(1409176303.149:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=483 comm="apparmor_parser"
[   14.218315] type=1400 audit(1409176303.149:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=411 comm="apparmor_parser"
[   14.218325] type=1400 audit(1409176303.149:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=411 comm="apparmor_parser"
[   14.218332] type=1400 audit(1409176303.149:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=411 comm="apparmor_parser"
[   14.218341] type=1400 audit(1409176303.149:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=410 comm="apparmor_parser"
[   14.218349] type=1400 audit(1409176303.149:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=410 comm="apparmor_parser"
[   14.218355] type=1400 audit(1409176303.149:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=410 comm="apparmor_parser"
[   14.218554] type=1400 audit(1409176303.149:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=483 comm="apparmor_parser"
[   14.280958] init: avahi-cups-reload main process (611) terminated with status 1
[   14.609929] Bluetooth: Core ver 2.17
[   14.609983] NET: Registered protocol family 31
[   14.609985] Bluetooth: HCI device and connection manager initialized
[   14.609998] Bluetooth: HCI socket layer initialized
[   14.610001] Bluetooth: L2CAP socket layer initialized
[   14.610006] Bluetooth: SCO socket layer initialized
[   14.947925] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.947930] Bluetooth: BNEP filters: protocol multicast
[   14.947944] Bluetooth: BNEP socket layer initialized
[   14.951495] Bluetooth: RFCOMM TTY layer initialized
[   14.951507] Bluetooth: RFCOMM socket layer initialized
[   14.951512] Bluetooth: RFCOMM ver 1.11
[   15.685408] init: failsafe main process (622) killed by TERM signal
[   17.963957] hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
[   18.185229] [drm] Disabling audio 0 support
[   19.069414] r8169 0000:02:00.0 eth0: link down
[   19.069451] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.069802] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.191637] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   19.191724] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[   19.192034] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.192649] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.060757] wlan0: authenticate with 10:fe:ed:c7:5a:20
[   20.062633] wlan0: send auth to 10:fe:ed:c7:5a:20 (try 1/3)
[   20.066224] wlan0: authenticated
[   20.068442] wlan0: associate with 10:fe:ed:c7:5a:20 (try 1/3)
[   20.072332] wlan0: RX AssocResp from 10:fe:ed:c7:5a:20 (capab=0x431 status=0 aid=1)
[   20.073002] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[   20.073070] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   20.073147] wlan0: associated
[   20.073161] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   20.073405] cfg80211: Calling CRDA for country: PL
[   20.076879] cfg80211: Regulatory domain changed to country: PL
[   20.076883] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   20.076885] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   20.076887] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   20.076889] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   20.076890] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[   20.076891] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[   21.147811] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[   24.628408] audit_printk_skb: 36 callbacks suppressed
[   24.628412] type=1400 audit(1409176313.557:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=958 comm="apparmor_parser"
[   24.628420] type=1400 audit(1409176313.557:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=958 comm="apparmor_parser"
[   24.628425] type=1400 audit(1409176313.557:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=958 comm="apparmor_parser"
[   24.628910] type=1400 audit(1409176313.557:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=958 comm="apparmor_parser"
[   24.628914] type=1400 audit(1409176313.557:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=958 comm="apparmor_parser"
[   24.629165] type=1400 audit(1409176313.557:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=958 comm="apparmor_parser"
[   24.633480] type=1400 audit(1409176313.565:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=962 comm="apparmor_parser"
[   24.638721] type=1400 audit(1409176313.569:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=963 comm="apparmor_parser"
[   24.638731] type=1400 audit(1409176313.569:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=963 comm="apparmor_parser"
[   24.639228] type=1400 audit(1409176313.569:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=963 comm="apparmor_parser"
[   25.358035] init: alsa-restore main process (1075) terminated with status 99
[   27.837174] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[   27.837299] radeon 0000:01:00.0: WB enabled
[   27.837303] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88009439fc00
[   27.837306] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88009439fc0c
[   27.838054] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000911c418
[   27.854700] [drm] ring test on 0 succeeded in 1 usecs
[   27.854762] [drm] ring test on 3 succeeded in 1 usecs
[   28.051033] [drm] ring test on 5 succeeded in 1 usecs
[   28.051044] [drm] UVD initialized successfully.
[   28.051048] [drm] Enabling audio 0 support
[   28.051096] [drm] ib test on ring 0 succeeded in 0 usecs
[   28.051135] [drm] ib test on ring 3 succeeded in 1 usecs
[   28.211766] [drm] ib test on ring 5 succeeded
[   28.245183] hda-intel 0000:01:00.1: Enabling via VGA-switcheroo
[   28.245378] snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X
[   28.247902] HDMI ATI/AMD: no speaker allocation for ELD
[   28.546522] HDMI ATI/AMD: no speaker allocation for ELD
[   28.846585] HDMI ATI/AMD: no speaker allocation for ELD
[   29.146676] HDMI ATI/AMD: no speaker allocation for ELD
[   29.446714] HDMI ATI/AMD: no speaker allocation for ELD
[   29.746728] HDMI ATI/AMD: no speaker allocation for ELD
[   30.046740] HDMI ATI/AMD: no speaker allocation for ELD
[   30.347009] HDMI ATI/AMD: no speaker allocation for ELD
[   30.602907] init: plymouth-upstart-bridge main process ended, respawning
[   30.610682] init: plymouth-upstart-bridge main process (1213) terminated with status 1
[   30.610704] init: plymouth-upstart-bridge main process ended, respawning
[   30.647206] HDMI ATI/AMD: no speaker allocation for ELD
[   39.678441] audit_printk_skb: 111 callbacks suppressed
[   39.678446] type=1400 audit(1409176328.600:71): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/etc/dconf/profile/gdm" pid=1453 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=115 ouid=0
[   73.794642] brcmsmac bcma0:0: START: tid 1 is not agg'able
[   90.799138] usb 2-1.2: new high-speed USB device number 4 using ehci-pci
[   90.892774] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6034
[   90.892783] usb 2-1.2: New USB device strings: Mfr=1, Product=11, SerialNumber=3
[   90.892788] usb 2-1.2: Product: Samsung G2 Portable
[   90.892793] usb 2-1.2: Manufacturer: JMicron
[   90.892797] usb 2-1.2: SerialNumber: 00000011E1890
[   90.994844] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[   90.994927] scsi4 : usb-storage 2-1.2:1.0
[   90.995025] usbcore: registered new interface driver usb-storage
[   92.011383] scsi 4:0:0:0: Direct-Access     Samsung  G2 Portable           PQ: 0 ANSI: 2 CCS
[   92.011857] sd 4:0:0:0: Attached scsi generic sg2 type 0
[   92.012512] sd 4:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[   92.013623] sd 4:0:0:0: [sdb] Write Protect is off
[   92.013634] sd 4:0:0:0: [sdb] Mode Sense: 3c 00 00 00
[   92.018836] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   92.056114]  sdb: sdb1
[   92.083446] sd 4:0:0:0: [sdb] Attached SCSI disk
[  303.941805] brcmsmac bcma0:0: START: tid 1 is not agg'able
[  304.454161] brcmsmac bcma0:0: START: tid 1 is not agg'able
[  389.934248] init: upstart-udev-bridge main process (296) terminated with status 1
[  389.934267] init: upstart-udev-bridge main process ended, respawning
[  389.934471] init: upstart-file-bridge main process (524) terminated with status 1
[  389.934488] init: upstart-file-bridge main process ended, respawning
[  389.934688] init: upstart-socket-bridge main process (637) terminated with status 1
[  389.934704] init: upstart-socket-bridge main process ended, respawning
[  415.559222] init: systemd-logind main process (548) killed by TERM signal
[  544.176476] brcmsmac bcma0:0: START: tid 1 is not agg'able
[  615.132770] perf samples too long (2515 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[  752.886121] systemd-udevd[7150]: starting version 204
[  810.948367] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[  811.001073] JFS: nTxBlock = 8192, nTxLock = 65536
[  811.079506] NTFS driver 2.1.30 [Flags: R/O MODULE].
[  811.124949] QNX4 filesystem 0.2.3 registered.
[  811.154117] xor: measuring software checksum speed
[  811.193716]    prefetch64-sse:  7228.000 MB/sec
[  811.233728]    generic_sse:  7724.000 MB/sec
[  811.233736] xor: using function: generic_sse (7724.000 MB/sec)
[  811.301725] raid6: sse2x1    5055 MB/s
[  811.369734] raid6: sse2x2    6003 MB/s
[  811.437782] raid6: sse2x4    6628 MB/s
[  811.437787] raid6: using algorithm sse2x4 (6628 MB/s)
[  811.437789] raid6: using ssse3x2 recovery algorithm
[  811.807959] bio: create slab at 1
[  811.810644] Btrfs loaded
[  836.497001] usb 2-1.3: USB disconnect, device number 3
[  840.792566] usb 2-1.3: new full-speed USB device number 5 using ehci-pci
[  840.888613] usb 2-1.3: New USB device found, idVendor=248a, idProduct=0568
[  840.888624] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  840.888629] usb 2-1.3: Product: Wireless Receiver
[  840.888634] usb 2-1.3: Manufacturer: Telink
[  840.891349] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input24
[  840.891637] hid-generic 0003:248A:0568.0002: input,hidraw0: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-0000:00:1d.0-1.3/input0
[  840.894502] hid (null): usage index exceeded
[  840.894801] hid-generic 0003:248A:0568.0003: usage index exceeded
[  840.894806] hid-generic 0003:248A:0568.0003: item 0 2 2 2 parsing failed
[  840.894821] hid-generic: probe of 0003:248A:0568.0003 failed with error -22
[  872.089089] usb 2-1.3: USB disconnect, device number 5
[  874.952214] brcmsmac bcma0:0: START: tid 1 is not agg'able
[  877.412942] usb 2-1.1: new full-speed USB device number 6 using ehci-pci
[  877.508947] usb 2-1.1: New USB device found, idVendor=248a, idProduct=0568
[  877.508957] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  877.508962] usb 2-1.1: Product: Wireless Receiver
[  877.508967] usb 2-1.1: Manufacturer: Telink
[  877.511323] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input25
[  877.511590] hid-generic 0003:248A:0568.0004: input,hidraw0: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-0000:00:1d.0-1.1/input0
[  877.514420] hid (null): usage index exceeded
[  877.514845] hid-generic 0003:248A:0568.0005: usage index exceeded
[  877.514851] hid-generic 0003:248A:0568.0005: item 0 2 2 2 parsing failed
[  877.514871] hid-generic: probe of 0003:248A:0568.0005 failed with error -22
[  879.770845] usb 2-1.1: USB disconnect, device number 6
[  886.371006] usb 2-1.1: new low-speed USB device number 7 using ehci-pci
[  886.469654] usb 2-1.1: New USB device found, idVendor=03f0, idProduct=8207
[  886.469664] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  886.469670] usb 2-1.1: Product: Wireless Optical Mobile Mouse
[  886.469675] usb 2-1.1: Manufacturer: HP
[  886.474176] input: HP Wireless Optical Mobile Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input26
[  886.474469] hid-generic 0003:03F0:8207.0006: input,hidraw0: USB HID v1.00 Mouse [HP Wireless Optical Mobile Mouse] on usb-0000:00:1d.0-1.1/input0
[  890.980032] usb 2-1.3: new high-speed USB device number 8 using ehci-pci
[  891.076573] usb 2-1.3: New USB device found, idVendor=0951, idProduct=1653
[  891.076581] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  891.076587] usb 2-1.3: Product: DT 100 G2
[  891.076592] usb 2-1.3: Manufacturer: Kingston
[  891.076596] usb 2-1.3: SerialNumber: 001D6095C756FC70354523DC
[  891.077100] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[  891.077239] scsi5 : usb-storage 2-1.3:1.0
[  892.215549] scsi 5:0:0:0: Direct-Access     Kingston DT 100 G2        1.00 PQ: 0 ANSI: 4
[  892.216005] sd 5:0:0:0: Attached scsi generic sg3 type 0
[  892.216663] sd 5:0:0:0: [sdc] 15131636 512-byte logical blocks: (7.74 GB/7.21 GiB)
[  892.217271] sd 5:0:0:0: [sdc] Write Protect is off
[  892.217278] sd 5:0:0:0: [sdc] Mode Sense: 45 00 00 00
[  892.217883] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  892.224805]  sdc: sdc1 sdc2
[  892.227656] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[  892.612306] ISO 9660 Extensions: Microsoft Joliet Level 3
[  892.656410] ISO 9660 Extensions: RRIP_1991A
[  921.682967] brcmsmac bcma0:0: START: tid 1 is not agg'able
[  922.347141] brcmsmac bcma0:0: START: tid 1 is not agg'able
[  923.163212] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 1155.320068] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 1590.918908] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 1601.825307] brcmsmac bcma0:0: START: tid 2 is not agg'able
[ 2165.183391] usb 2-1.2: USB disconnect, device number 4
[ 2166.975800] usb 2-1.3: USB disconnect, device number 8
[ 2346.738077] perf samples too long (5004 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[ 2544.751396] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 2544.891317] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 2545.199417] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 2545.363462] brcmsmac bcma0:0: START: tid 1 is not agg'able
[ 3544.569064] usb 2-1.1: USB disconnect, device number 7
[ 3559.877813] usb 2-1.1: new full-speed USB device number 9 using ehci-pci
[ 3559.973753] usb 2-1.1: New USB device found, idVendor=248a, idProduct=0568
[ 3559.973759] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3559.973762] usb 2-1.1: Product: Wireless Receiver
[ 3559.973765] usb 2-1.1: Manufacturer: Telink
[ 3559.975994] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input27
[ 3559.976282] hid-generic 0003:248A:0568.0007: input,hidraw0: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-0000:00:1d.0-1.1/input0
[ 3559.979120] hid (null): usage index exceeded
[ 3559.979554] hid-generic 0003:248A:0568.0008: usage index exceeded
[ 3559.979561] hid-generic 0003:248A:0568.0008: item 0 2 2 2 parsing failed
[ 3559.979582] hid-generic: probe of 0003:248A:0568.0008 failed with error -22
[ 3681.884394] usb 2-1.1: USB disconnect, device number 9

Offline mateo86

  • Users
  • Guru
  • *****
  • Wiadomości: 647
    • Zobacz profil
Mysz
« Odpowiedź #7 dnia: 2014-08-28, 02:00:58 »
Z pobieżnego przejrzenia sieci wynika, że to bardzo kiepski model win-myszy.
Sugestie jakie znalazłem to włączenie i wyłączenie kilkukrotne myszy do portu usb, za którymś razem niby powinna zaskoczyć (10-15, fuck!).
Posiadasz USB 3.0? W sieci sugerują korzystać z 2.0.

Bardziej kompleksowego rozwiązania nie znalazłem - może wypowie się ktoś bardziej obcykany w tym temacie, ew. jutro pogrzebie głębiej.

baklazann

  • Gość
Mysz
« Odpowiedź #8 dnia: 2014-08-28, 10:03:28 »
ok dziekuje za pomoc i tak to juz cos.

Xax79

  • Gość
Mysz
« Odpowiedź #9 dnia: 2014-08-28, 15:50:50 »
Z tymi komunikatami z dmesg to zaszalałeś :)
Odłacz myszkę, wyczyść komunikaty kernela przez 'dmesg -c' (trzeba jako root albo przez sudo). Następnie podłącz mysz. W dmesgu bedą tylko informacje dotyczące myszy. Wklej na forum.