Nowe posty

Autor Wątek: AMD/ATI Radeon HD 4850  (Przeczytany 10583 razy)

Offline

  • Users
  • Nowy na forum
  • *
  • Wiadomości: 30
    • Zobacz profil
AMD/ATI Radeon HD 4850
« dnia: 2014-02-21, 09:13:55 »
Witajcie, potrzebuję pomocy.

- Problem z kartą graficzną AMD/ATI Radeon HD 4850, a dokładniej ze sterownikami.

Gdy miałem Minta 15 na starym deskopie to nie było problemu, bo wykrywał sterowniki własnościowe i je zainstalowałem. Wsparcie się skończyło więc postanowiłem przejść na wersje LTS.
Po za instalowaniu Linux Mint 13 pojawiły sie 2 problemy z kartą (brak sterowników własnościowych, do wyboru i drukarką{taki sam problem miałem przy mint 15}. Postanowiłem rozwiązać problem z drukarką i zainstalowałem KUBUNTU 12.04 LTS. teraz drukarka działa OK, ale karta dalej nie chodzi.

Po wybraniu "Dodatkowe sterowniki" wyskakuje, "Ten system nie korzysta z żadnych sterowników własnościowych" i było pusto.
 Nie mogę zainstalować do niej odpowiednich sterowników. Te co są (co się zainstalowały, lub grafika chodzi z płyty głównej), nie pozwalają na odpalenie gier młodszemu bratu (Stama, chodziły wcześniej na  Mint 15).  

Błąd to "Failed to create GL context: Could not create GL context"

Od 2 dni przeszukuje internet próbuje z różnych stron zainstalować je jakoś, ale bez skutecznie.  Pobieram różne programy itd ale one nie mogą wykryć sterowników.

np. The Fun Club - Ubuntu AMD Catalyst a efekt:
Cytuj
Detected graphics controller:

Hynix Semiconductor (Hyundai Electronics)  Radeon HD 4850

Ubuntu 12.04
Linux Kernel: 3.5
X-Server version: 1.12


Your system is not supported by this driver
Próbowałem szukać i instalować z innych stron , albo piszą tam skrótowo, albo po Chińsku.. :/

Może te dane pomogą z Terminala:

Cytuj
system@system-M52L-S3P:~$ lspci -k | grep -A3 VGA
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV770 [Radeon HD 4850]
        Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] MSI Radeon HD 4850 512MB GDDR3
        Kernel driver in use: radeon
        Kernel modules: radeon

system@system-M52L-S3P:~$ cat /proc/pci | grep VGA || lspci | grep VGA | colrm 1 4 ; cat /proc/cpuinfo | egrep "model name|MHz" ; xdpyinfo | egrep "version:|dimensions|depth of" ; glxinfo | egrep -A2 "direct rendering|OpenGL vendor" ; uname -sr;
cat: /proc/pci: Nie ma takiego pliku ani katalogu
0.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV770 [Radeon HD 4850]
model name      : AMD Athlon(tm) II X2 245 Processor
cpu MHz         : 2900.000
model name      : AMD Athlon(tm) II X2 245 Processor
cpu MHz         : 800.000
X.Org version: 1.12.3
  dimensions:    1280x1024 pixels (338x270 millimeters)
  depth of root window:    24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
--
OpenGL vendor string: X.Org
OpenGL renderer string: Gallium 0.4 on AMD RV770
OpenGL version string: 2.1 Mesa 9.2.0
Linux 3.5.0-18-generic

system@system-M52L-S3P:~$  vblank_mode=0 glxgears & sleep 30 ; killall glxgears
[1] 3529
ATTENTION: default value of option vblank_mode overridden by environment.
5133 frames in 5.0 seconds = 1026.587 FPS
5039 frames in 5.0 seconds = 1007.616 FPS
5126 frames in 5.0 seconds = 1025.032 FPS
5119 frames in 5.0 seconds = 1023.640 FPS
5253 frames in 5.0 seconds = 1050.441 FPS
system@system-M52L-S3P:~$
Zwracam się do was o pomoc w doprowadzeniu karty do ładu.



Pozdrawiam
SAW

Offline 1709

  • Users
  • Guru
  • *****
  • Wiadomości: 2393
  • 1709
    • Zobacz profil
AMD/ATI Radeon HD 4850
« Odpowiedź #1 dnia: 2014-02-21, 17:09:41 »
Może troche wyklaruje albo nie ...

OpenGL vendor string: X.Org
OpenGL renderer string: Gallium 0.4 on AMD RV770
OpenGL version string: 2.1 Mesa 9.2.0

Korzystasz z Mesa jak wyżej, moim zdaniem nie zawsze były złe,
ale poprostu działają tylko pewnemu gronu kart graficznych ,
a nawet dla nich są ulepszane, więc nie są dobre.
( dobre są ale sterowniki 2D bo zazwyczaj działają jak trzeba)

Tu zawsze znajdziesz sterowniki do AMD,
nawet do Linuxa
http://www.amd.com/pl/Pages/AMDHomePage.aspx

instrukcja jest w srodku, objaśnienia znajdziesz tez w google.
Jeśli instalacja się nie powiedzie ( bedzie pisać przy instalacji )
to problemów szukaj w nowych pakietach systemu.

Zazwyczaj sterowniki AMD sa w dystrybucjach, upewnij się.
Uruchom gre w terminalu by zobaczyć czy nie ma więcej błędów,
pomocna moze komenda
strace -e open
(strace trzeba se zainstalowac by móc używać)
pozwoli to zobaczyc jakie biblioteki uruchamia,
tutaj przydałoby sie byś zajzał na odpowiedniejsze forum zaleznie od dystrybucji
linuxa jakiego uzywasz by podał ktoś wynik strace
żebyś mógł porównać.

Istotne jest także byś patrzył na logi w tym /var/log/Xorg.0.log
i w konfiguracje czy sterownik zaladował się mesa czy AMD,
czasami tez to pisze w logu, ale nie zawsze.
Konfiguracje gdzie znajdziesz to nie wiem, ponieważ mój system
nie zmienił rodzaju konfiguracji.
Tu znajdziesz info gdzie szukac pliku konfiguracyjnego
https://wiki.archlinux.org/index.php/Xorg_%28Polski%29
https://wiki.archlinux.org/index.php/Amd_catalyst

Podalem Ci wiki do Arch linux , ale w twoich systemach powinno być mniej więcej tak samo.

Jeżeli nie znajdziesz sterownika na stronie AMD ( a powinno)
to powinno tam chociaż pisać ze sterownik został przeniesiony do
Mesa ( dotyczy to tylko starych sterowników które AMD nie chce już wspierać,
twojego HD chyba raczej to nie dotyczy )

No to do dzieła!

Gdybyś sobie nie poradzil to możesz przetestować Suse,
ma świetnie spaczkowane sterowniki własnościowe,
a bynajmniej mieli. Tylko nie wiem czy mają Steama.

Jaką drugą opcję polecam PCLinuxOS, ma Steama.
Nie wiem tylko jak się mają sterowniki AMD , mogłbyś przetestować,
na te od Nvidia nie narzekam, działają świetnie.
Tylko jest jedna rzecz w tym systemie , orginalnie sterowniki działają na mesa,
wchodzisz w ustawienia Configure your computer i zmieniasz tam
karte graficzną (spyta czy chcesz sterownik wlasnosciowy czy nie)
, wybierasz tam monitor , ewentualnie dodatkowe opcje wydajnosciowe które chcesz.
Resetujesz kompa i powinno działać :)
PS: Brak polskiej czcionki, nie jest to brak lenistwa, a jej brak w systemie i brak czasu na reczne poprawki.

Offline

  • Users
  • Nowy na forum
  • *
  • Wiadomości: 30
    • Zobacz profil
AMD/ATI Radeon HD 4850
« Odpowiedź #2 dnia: 2014-02-23, 16:17:06 »
Coś tam już rozumiem.

Byłem wcześniej na stronie AMD i nie znalazłem tam sterowników do mojej karty (już nie ma :( ) Ale teraz znalazłem tam AMD Catalyst Display Driver i to pobrałem.

Próbowałem to zainstalować i gdy już udało mi się to uruchomić za pomocą terminala, po instalacji wyskakuje jakiś Błąd i prosi o usunięcie jakiegoś pliku.
Myślałem, że to przez te różne kombinacje i instalowanie różnych badziewi na różne sposoby do tej karty (Próbowałem to usunąć ręcznie, lecz się nie da, a w konsoli nie mam pojęcia jak to zrobić).  
Zrobiłem dziś kolejny format i stawianie systemu myśląc,  że może to pomoże i będzie dziś bez problemu, Myliłem sie... :/

Teraz to niby ta instalacja co wcześniej się przeprowadziła nie rusza tego Catalyst, a do tego wyświetla w konsoli ten sam plik do usunięcia...

Wygląda to tak:
Cytuj
system@Kubuntu-M52L-S3P:~/Dokumenty$ sudo sh amd-catalyst-13.12-linux-x86.x86_64.run
[sudo] password for system:
Created directory fglrx-install.EAjWzc
Verifying archive integrity... All good.
Uncompressing AMD Catalyst(TM) Proprietary Driver-13.251...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
=====================================================================
 AMD Catalyst(TM) Proprietary Driver Installer/Packager
=====================================================================
Detected configuration:
Architecture: i686 (32-bit)
X Server: X.Org 6.9 or later
loki_setup: directory: (null)
Removing temporary directory: fglrx-install.EAjWzc
system@Kubuntu-M52L-S3P:~/Dokumenty$ sudo sh amd-catalyst-13.12-linux-x86.x86_64.run
Created directory fglrx-install.opjmwv
Verifying archive integrity... All good.
Uncompressing AMD Catalyst(TM) Proprietary Driver-13.251...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
=====================================================================
 AMD Catalyst(TM) Proprietary Driver Installer/Packager
=====================================================================
Detected configuration:
Architecture: i686 (32-bit)
X Server: X.Org 6.9 or later
loki_setup: directory: (null)
Removing temporary directory: fglrx-install.opjmwv
system@Kubuntu-M52L-S3P:~/Dokumenty$
Teraz  jak poprzednio(też na nowym systemie) nie wyświetla nic mi w "Dodatkowe sterowniki" . Wcześniej przed formatem po tych dziwnych próbach instalacji pojawiła się tam lista różnych urządzeń ale wszystkie miały "Wolny sterownik"

Nie dość tego wczoraj (Przed formatem) Gdy zainstalowałem część tego sterownika {do czasu pojawienie się błędu coś się zainstalowało i zakończyło} to po restarcie kompa STEM już w ogóle się nie odpalał...


Nie wiem jak w Dystrybucji sprawdzić czy są sterowniki?

Mam dosyć skakania i po dystrybucjach... Proszę pomóżcie rozwiązać ten problem bo mi już siły opadają..


..
SAW

Offline 1709

  • Users
  • Guru
  • *****
  • Wiadomości: 2393
  • 1709
    • Zobacz profil
AMD/ATI Radeon HD 4850
« Odpowiedź #3 dnia: 2014-02-23, 19:26:44 »
1 " Nie wiem jak w Dystrybucji sprawdzić czy są sterowniki? "
Google i tutaj ludzie Ci pomogą :)

Przy wpisywaniu w google staraj się czasem dodać słowo " linux "
na początku, to sprecyzuje listę wyszukiwań.


Mozesz skorzystac z któryś z tych komend
lspci | grep -E "VGA|3D"
lshw -c display
 inxi -Gx
hwinfo --gfxcard
Jak w linku
http://www.pclinuxos.com/forum/index.php/topic,123606.0.html
lub tez
glxinfo | grep OpenGL
http://forum.linux.pl/viewtopic.php?id=16428

|-----          -----      -------      -------          ------      ---
glxinfo | grep rendering
(Jeżeli odpowiedź brzmi: "No", akcelaracja 3D nie działa)

glxgears
Uwaga: FPS-y mogą być ograniczone przez wielkość odświeżania monitora.

Jeśli wyskoczy coś w stylu "command not found"
to znaczy że program obslugujący tą komendę nie jest zainstalowany
na twoim systemie, lub komenda nie istnieje.

2. Jeśli jestes zmęczony zrób sobie trochę przerwy,
 - napewno nie zaszkodzi.

3. Co to twojego sterownika nie widze tam błędów.
Na stronie której sciagałeś jest także instrukcja,
nie wiemm czy ją czytałeś.
http://support.amd.com/en-us/kb-articles/Pages/Catalyst-Linux-Installer-Notes.aspx

Nawet masz nazwy dystrybucji pod które były robione,
ale zakładam że powinny działać na każdej ,  w teorii ).

Translator moze Ci się przyda
http://translate.google.pl/

Na wiki debiana był ten link
http://wiki.cchtml.com/index.php/Main_Page
po prawej w linku masz linki to poradników dla danego linuxa,
dalej nawet czasami do wersji danej dystrybucji linuxa ,
jak zainstalować.
W sumie ten akurat link nie jest Ci potrzebny, wystarczy ten ze strony AMD,
ale gdybys mial problemy, możesz tam zajżeć.

Jakiej teraz dystrybucji używasz?

PS:
Nawet w google poradnik do Suse znajdziesz
http://susek.info/1163/Instalacja-sterownikow-do-kart-ATI-AMD-Radeon
PS: Brak polskiej czcionki, nie jest to brak lenistwa, a jej brak w systemie i brak czasu na reczne poprawki.

Offline

  • Users
  • Nowy na forum
  • *
  • Wiadomości: 30
    • Zobacz profil
AMD/ATI Radeon HD 4850
« Odpowiedź #4 dnia: 2014-02-27, 11:59:06 »
Witam :)

2. Musiałem parę dni odpocząć :)

1. Wujek google zawsze mi coś pokaże co nie dotyczy dokładnie mnie (mam zawsze taką tendencje) lecz jest zbliżone, ale jednak to nigdy nie to samo :D "Prawie to samo, robi wieką różnice bynajmniej w linuksie"



Wracając do tematu: Używam dalej Kubuntu 12.04LTS

Tak pobrałem ze strony AMD ten uniwersalny sterownik amd-catalyst-13.12-linux-x86.x86_64.run i Uruchomiłem w Terminalu, lecz teraz nie chce sie zainstalować (poprzednio proces instalacyjny"graficzny ten z instrukcji"  przebiegał do konca i był zakończony sukcesem). Teraz wyskakuje info: "YOUR GRAPHICS ADAPTER IS NOT SUPPORTED BY THIS DRIVER. INSTALLATOR WILL NOT PROCEED"
(rozumiem to, ale nie rozumiem dlaczego teraz nie działa, jak wcześniej sie instalowało? Raczej tą sama wersje ściągnąłem wtedy, nie pamiętam. {wtedy przed zainstalowaniem różne inne rzeczy pobierałem i instalowałem z różnych stron] ). Problem pojawiający sie po tym wczesniej i teraz jest w konsoli:
Cytuj
AMD Catalyst(TM) Proprietary Driver Installer/Packager
=====================================================================
Detected configuration:
Architecture: i686 (32-bit)
X Server: X.Org 6.9 or later
loki_setup: directory: (null)
Removing temporary directory: fglrx-install.guRD0Z
system@Kubuntu-M52L-S3P:~$
Nic sie po tym nie dzieje, poprzednio zrestartowałem, to w Dodatkowych Sterownikach nic sie nie zmieniło, a pojawił sie dodatkowy problem ze STEAM sie nie uruchamiał w ogóle! (cos tam pisało z OpenGL...).  Teraz to nic nie daje bo brak instalacji.

O to wyniki z Konsoli do tych komend co podałeś wyżej:

Cytuj
system@Kubuntu-M52L-S3P:~$ lspci | grep -E "VGA|3D"
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV770 [Radeon HD 4850]
system@Kubuntu-M52L-S3P:~$ lshw -c display
WARNING: you should run this program as super-user.
  *-display UNCLAIMED    
       description: VGA compatible controller
       product: RV770 [Radeon HD 4850]
       vendor: Hynix Semiconductor (Hyundai Electronics)
       physical id: 0
       bus info: pci@0000:02:00.0
       version: 00
       width: 64 bits
       clock: 33MHz
       capabilities: vga_controller bus_master cap_list
       configuration: latency=0
       resources: memory:d0000000-dfffffff memory:fdde0000-fddeffff ioport:bc00(size=256) memory:fdd00000-fdd1ffff
WARNING: output may be incomplete or inaccurate, you should run this program as super-user.
system@Kubuntu-M52L-S3P:~$ inxi -Gx
inxi: nie znaleziono polecenia
system@Kubuntu-M52L-S3P:~$ hwinfo --gfxcard
> hal.1: read hal dataprocess 11408: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 282.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
25: PCI 200.0: 0300 VGA compatible controller (VGA)            
  [Created at pci.318]
  Unique ID: B35A.mzdmMJY65Z2
  Parent ID: WL76.lW0IfrjOTIA
  SysFS ID: /devices/pci0000:00/0000:00:09.0/0000:02:00.0
  SysFS BusID: 0000:02:00.0
  Hardware Class: graphics card
  Model: "ATI RV770 [Radeon HD 4850]"
  Vendor: pci 0x1002 "ATI Technologies Inc"
  Device: pci 0x9442 "RV770 [Radeon HD 4850]"
  SubVendor: pci 0x1002 "ATI Technologies Inc"
  SubDevice: pci 0x0502
  Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
  Memory Range: 0xfdde0000-0xfddeffff (rw,non-prefetchable)
  I/O Ports: 0xbc00-0xbcff (rw)
  Memory Range: 0xfdd00000-0xfdd1ffff (ro,non-prefetchable,disabled)
  IRQ: 16 (no events)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v00001002d00009442sv00001002sd00000502bc03sc00i00"
  Driver Info #0:
    Driver Status: radeon is not active
    Driver Activation Cmd: "modprobe radeon"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #19 (PCI bridge)

Primary display adapter: #25
system@Kubuntu-M52L-S3P:~$ glxinfo | grep OpenGL
X Error of failed request:  BadRequest (invalid request code or no such operation)
  Major opcode of failed request:  135 (GLX)
  Minor opcode of failed request:  19 (X_GLXQueryServerString)
  Serial number of failed request:  12
  Current serial number in output stream:  12
system@Kubuntu-M52L-S3P:~$ glxinfo | grep rendering
X Error of failed request:  BadRequest (invalid request code or no such operation)
  Major opcode of failed request:  135 (GLX)
  Minor opcode of failed request:  19 (X_GLXQueryServerString)
  Serial number of failed request:  12
  Current serial number in output stream:  12
system@Kubuntu-M52L-S3P:~$ glxgears
X Error of failed request:  BadRequest (invalid request code or no such operation)
  Major opcode of failed request:  135 (GLX)
  Minor opcode of failed request:  19 (X_GLXQueryServerString)
  Serial number of failed request:  12
  Current serial number in output stream:  12
system@Kubuntu-M52L-S3P:~$
Wybacz, rozumiem mogę sobie to przetłumaczyć, ale pewnie i tam nie zrozumiem co jest nie tak i czego mam tu szukac :/  Przyznam sie że nie mam pojęcia o tym dlatego proszę o pomoc.

3. Według tej instrukcji zrobiłem pierwszy raz teraz nie idzie..

4. według ten instrukcji ze straony Debiana ---> dla ubuntu próbowałem zrobić ale cos nie poszło.. może spróbuje jeszcze raz.

Co do suse no jest bardzo fajnie tam opisane :) ale Suse ma całkiem inna budowie i komendy Paczki RPM (mam suse na Laptopie). I nie będę  instalował go na stacjonarnym, bo jest zbyt trudny i do tego ma skomplikowane środowiska graficzne  gdzie mój ojciec i młodszy brat sobie nie poradzą.



Nie wiem co robię źle, bo wszędzie piszą że to jest proste ( podobnie miałem z drukarką HP 1020 na Mint) Wiecznie mam jakieś problemy z linuxem :/ lecz nie poddaje sie i walczę (to przy okazji powoduje ze zgłebiam tajniki systemu:D ) :). Lecz chciałbym tez raz trafic na taka dystrybucje gdzie nie bedze miał problemów (zainstaluje i wszystko działa:D ).


PS. mógłbym zainstalować samo UBUNTU (nie wiem czy cos by to dało) lecz środowisko Unity(mi odpowiadające) nie bedzie przyjazne dla innych użytkowników... I dlatego wybrałem przyjaźniejsze Kubuntu)

Ps. Może trzeba pobrac Starsze wydanie AMD Catalyty??
SAW

Offline

  • Users
  • Nowy na forum
  • *
  • Wiadomości: 30
    • Zobacz profil
AMD/ATI Radeon HD 4850
« Odpowiedź #5 dnia: 2014-02-27, 14:03:24 »
Właśnie zainstalowałem  STEMA i mam ten sam błąd co ostatnio : " glXChoose Visual failed"  i nie uruchami się.

Czyli już jest cos nie tak z tymi sterownikami Otwartymi" A gdzie tu teraz mowa o sterownikach AMD.
SAW

Offline 1709

  • Users
  • Guru
  • *****
  • Wiadomości: 2393
  • 1709
    • Zobacz profil
AMD/ATI Radeon HD 4850
« Odpowiedź #6 dnia: 2014-02-27, 16:33:52 »
Otwarte to naprawiasz w ten sposób ze reinstalujesz pakiety
wybacz - " jakieś tam od sterowników "
z repozytorium, robisz reboot systemu i powinny działać z powrotem.

Edit.
Przed zainstalowaniem ponownie sterowników,
próbowałes pierw odistalowac stare sterowniki poprzez
"Uninstalling the AMD Catalyst™ Proprietary Driver"
w manualu AMD ?
PS: Brak polskiej czcionki, nie jest to brak lenistwa, a jej brak w systemie i brak czasu na reczne poprawki.

Offline

  • Users
  • Nowy na forum
  • *
  • Wiadomości: 30
    • Zobacz profil
AMD/ATI Radeon HD 4850
« Odpowiedź #7 dnia: 2014-02-27, 17:21:29 »
no te juz naprawiłem :) dzięki.tele

Ale co dalej? Znalazłem taka stronkę : https://launchpad.net/~makson96/+archive/fglrx
I zainstalowałem z niej

Cytuj
To use Catalyst Legacy 13.1 you need to do following commands:

sudo add-apt-repository ppa:makson96/fglrx
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install fglrx-legacy

And restart your computer.
No i tak zrobiłem. Po ponownym uruchomieniu odpalam Dodatkowe sterowniki i tam jest 1 pozycja (ta od karty) ale wyłączona, to ja włączam i uruchamiam ponownie komputer i sprawdzam dodatkowe sterowniki, a tam nic nie wykrywa...
SAW

Offline 1709

  • Users
  • Guru
  • *****
  • Wiadomości: 2393
  • 1709
    • Zobacz profil
AMD/ATI Radeon HD 4850
« Odpowiedź #8 dnia: 2014-02-27, 18:09:05 »
W /var/log/Xorg.0.log nie ma jakichś błędów ?
mógłbyś pokazać log wklajając kod pomiedzy tagi [code ...
http://forum.linux.pl/help.php#img
 lub na jakąś stronkę "wklej" i linka tu ?
PS: Brak polskiej czcionki, nie jest to brak lenistwa, a jej brak w systemie i brak czasu na reczne poprawki.

Offline

  • Users
  • Nowy na forum
  • *
  • Wiadomości: 30
    • Zobacz profil
AMD/ATI Radeon HD 4850
« Odpowiedź #9 dnia: 2014-02-27, 18:42:40 »
[    16.173] 
X.Org X Server 1.11.3
Release Date: 2011-12-16
[    16.173] X Protocol Version 11, Revision 0
[    16.173] Build Operating System: Linux 2.6.42-37-generic i686 Ubuntu
[    16.173] Current Operating System: Linux Kubuntu-M52L-S3P 3.2.0-59-generic-pae #90-Ubuntu SMP Tue Jan 7 23:07:06 UTC 2014 i686
[    16.173] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-59-generic-pae root=UUID=569c2cc3-463a-458e-b7be-e7d95c46860b ro quiet splash vt.handoff=7
[    16.173] Build Date: 16 October 2013  04:45:22PM
[    16.173] xorg-server 2:1.11.4-0ubuntu10.14 (For technical support please see http://www.ubuntu.com/support)
[    16.173] Current version of pixman: 0.30.2
[    16.173] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    16.173] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    16.173] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 27 16:17:08 2014
[    16.211] (==) Using config file: "/etc/X11/xorg.conf"
[    16.211] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    16.252] (==) No Layout section.  Using the first Screen section.
[    16.252] (**) |-->Screen "Default Screen" (0)
[    16.252] (**) |   |-->Monitor ""
[    16.264] (==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
[    16.264] (==) Automatically adding devices
[    16.264] (==) Automatically enabling devices
[    16.302] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    16.302] Entry deleted from font path.
[    16.302] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    16.302] Entry deleted from font path.
[    16.302] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    16.302] Entry deleted from font path.
[    16.302] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    16.302] Entry deleted from font path.
[    16.302] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    16.302] Entry deleted from font path.
[    16.302] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    16.302] Entry deleted from font path.
[    16.302] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[    16.302] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    16.302] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    16.303] (II) Loader magic: 0xb77265a0
[    16.303] (II) Module ABI versions:
[    16.303] X.Org ANSI C Emulation: 0.4
[    16.303] X.Org Video Driver: 11.0
[    16.303] X.Org XInput driver : 16.0
[    16.303] X.Org Server Extension : 6.0
[    16.303] (--) PCI:*(0:2:0:0) 1002:9442:1002:0502 rev 0, Mem @ 0xd0000000/268435456, 0xfdde0000/65536, I/O @ 0x0000bc00/256, BIOS @ 0x????????/131072
[    16.303] (II) Open ACPI successful (/var/run/acpid.socket)
[    16.303] (II) "extmod" will be loaded by default.
[    16.303] (II) "dbe" will be loaded by default.
[    16.303] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    16.303] (II) "record" will be loaded by default.
[    16.303] (II) "dri" will be loaded by default.
[    16.303] (II) "dri2" will be loaded by default.
[    16.303] (II) LoadModule: "glx"
[    16.502] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so
[    16.530] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    16.530] compiled for 6.9.0, module version = 1.0.0
[    16.530] (II) Loading extension GLX
[    16.530] (II) LoadModule: "extmod"
[    16.598] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    16.614] (II) Module extmod: vendor="X.Org Foundation"
[    16.614] compiled for 1.11.3, module version = 1.0.0
[    16.614] Module class: X.Org Server Extension
[    16.614] ABI class: X.Org Server Extension, version 6.0
[    16.614] (II) Loading extension MIT-SCREEN-SAVER
[    16.614] (II) Loading extension XFree86-VidModeExtension
[    16.614] (II) Loading extension XFree86-DGA
[    16.622] (II) Loading extension DPMS
[    16.622] (II) Loading extension XVideo
[    16.622] (II) Loading extension XVideo-MotionCompensation
[    16.622] (II) Loading extension X-Resource
[    16.622] (II) LoadModule: "dbe"
[    16.622] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    16.645] (II) Module dbe: vendor="X.Org Foundation"
[    16.645] compiled for 1.11.3, module version = 1.0.0
[    16.645] Module class: X.Org Server Extension
[    16.645] ABI class: X.Org Server Extension, version 6.0
[    16.645] (II) Loading extension DOUBLE-BUFFER
[    16.645] (II) LoadModule: "record"
[    16.645] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    16.668] (II) Module record: vendor="X.Org Foundation"
[    16.668] compiled for 1.11.3, module version = 1.13.0
[    16.668] Module class: X.Org Server Extension
[    16.668] ABI class: X.Org Server Extension, version 6.0
[    16.668] (II) Loading extension RECORD
[    16.668] (II) LoadModule: "dri"
[    16.668] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    16.689] (II) Module dri: vendor="X.Org Foundation"
[    16.689] compiled for 1.11.3, module version = 1.0.0
[    16.689] ABI class: X.Org Server Extension, version 6.0
[    16.689] (II) Loading extension XFree86-DRI
[    16.689] (II) LoadModule: "dri2"
[    16.690] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    16.700] (II) Module dri2: vendor="X.Org Foundation"
[    16.700] compiled for 1.11.3, module version = 1.2.0
[    16.700] ABI class: X.Org Server Extension, version 6.0
[    16.700] (II) Loading extension DRI2
[    16.700] (==) Matched fglrx as autoconfigured driver 0
[    16.700] (==) Matched ati as autoconfigured driver 1
[    16.700] (==) Matched vesa as autoconfigured driver 2
[    16.700] (==) Matched fbdev as autoconfigured driver 3
[    16.701] (==) Assigned the driver to the xf86ConfigLayout
[    16.701] (II) LoadModule: "fglrx"
[    16.701] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so
[    17.062] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    17.062] compiled for 1.4.99.906, module version = 8.97.2
[    17.062] Module class: X.Org Video Driver
[    17.070] (II) Loading sub module "fglrxdrm"
[    17.070] (II) LoadModule: "fglrxdrm"
[    17.070] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
[    17.105] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    17.105] compiled for 1.4.99.906, module version = 8.97.2
[    17.112] (II) LoadModule: "ati"
[    17.112] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    17.120] (II) Module ati: vendor="X.Org Foundation"
[    17.120] compiled for 1.11.3, module version = 6.14.99
[    17.120] Module class: X.Org Video Driver
[    17.120] ABI class: X.Org Video Driver, version 11.0
[    17.120] (II) LoadModule: "radeon"
[    17.120] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    17.166] (II) Module radeon: vendor="X.Org Foundation"
[    17.166] compiled for 1.11.3, module version = 6.14.99
[    17.166] Module class: X.Org Video Driver
[    17.166] ABI class: X.Org Video Driver, version 11.0
[    17.168] (II) LoadModule: "vesa"
[    17.168] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    17.170] (II) Module vesa: vendor="X.Org Foundation"
[    17.170] compiled for 1.11.3, module version = 2.3.0
[    17.170] Module class: X.Org Video Driver
[    17.170] ABI class: X.Org Video Driver, version 11.0
[    17.170] (II) LoadModule: "fbdev"
[    17.171] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    17.171] (II) Module fbdev: vendor="X.Org Foundation"
[    17.171] compiled for 1.11.3, module version = 0.4.2
[    17.171] ABI class: X.Org Video Driver, version 11.0
[    17.171] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[    17.171] (II) ATI Proprietary Linux Driver Release Identifier: 8.97.100.7                          
[    17.171] (II) ATI Proprietary Linux Driver Build Date: Nov 16 2012 14:44:57
[    17.171] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS
[    17.174] (II) VESA: driver for VESA chipsets: vesa
[    17.174] (II) FBDEV: driver for framebuffer: fbdev
[    17.174] (++) using VT number 7

[    17.174] (WW) Falling back to old probe method for fglrx
[    17.278] (II) Loading PCS database from /etc/ati/amdpcsdb
[    17.299] (--) Assigning device section with no busID to primary device
[    17.299] (--) Chipset Supported AMD Graphics Processor (0x9442) found
[    17.300] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
[    17.300] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    17.311] (II) AMD Video driver is signed
[    17.311] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so
[    17.311] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
[    17.311] (II) fglrx(0): pEnt->device->identifier=0xb76d675f
[    17.311] (WW) Falling back to old probe method for vesa
[    17.311] (WW) Falling back to old probe method for fbdev
[    17.311] (II) Loading sub module "fbdevhw"
[    17.311] (II) LoadModule: "fbdevhw"
[    17.318] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    17.329] (II) Module fbdevhw: vendor="X.Org Foundation"
[    17.329] compiled for 1.11.3, module version = 0.0.2
[    17.329] ABI class: X.Org Video Driver, version 11.0
[    17.329] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[    17.329] (II) Loading sub module "vgahw"
[    17.329] (II) LoadModule: "vgahw"
[    17.330] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    17.331] (II) Module vgahw: vendor="X.Org Foundation"
[    17.331] compiled for 1.11.3, module version = 0.1.0
[    17.331] ABI class: X.Org Video Driver, version 11.0
[    17.331] (II) fglrx(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[    17.331] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    17.331] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    17.331] (==) fglrx(0): Default visual is TrueColor
[    17.331] (==) fglrx(0): RGB weight 888
[    17.331] (II) fglrx(0): Using 8 bits per RGB
[    17.331] (==) fglrx(0): Buffer Tiling is ON
[    17.332] (II) Loading sub module "fglrxdrm"
[    17.332] (II) LoadModule: "fglrxdrm"
[    17.332] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
[    17.332] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    17.332] compiled for 1.4.99.906, module version = 8.97.2
[    17.334] ukiDynamicMajor: found major device number 250
[    17.334] ukiDynamicMajor: found major device number 250
[    17.334] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[    17.334] ukiOpenDevice: node name is /dev/ati/card0
[    17.334] ukiOpenDevice: open result is 12, (OK)
[    17.334] ukiOpenByBusid: ukiOpenMinor returns 12
[    17.334] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[    17.334] (**) fglrx(0): NoAccel = NO
[    17.334] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[    17.334] (--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series         " (Chipset = 0x9442)
[    17.334] (--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0502)
[    17.334] (==) fglrx(0): board vendor info: original ATI graphics adapter
[    17.334] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[    17.334] (--) fglrx(0): MMIO registers at 0xfdde0000
[    17.334] (--) fglrx(0): I/O port at 0x0000bc00
[    17.334] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    17.349] (II) fglrx(0): AC Adapter is used
[    17.478] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    17.487] (II) Loading sub module "vbe"
[    17.487] (II) LoadModule: "vbe"
[    17.488] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    17.495] (II) Module vbe: vendor="X.Org Foundation"
[    17.495] compiled for 1.11.3, module version = 1.1.0
[    17.495] ABI class: X.Org Video Driver, version 11.0
[    17.495] (II) fglrx(0): VESA BIOS detected
[    17.495] (II) fglrx(0): VESA VBE Version 3.0
[    17.495] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    17.495] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    17.495] (II) fglrx(0): VESA VBE OEM Software Rev: 11.19
[    17.495] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[    17.495] (II) fglrx(0): VESA VBE OEM Product: RV770
[    17.495] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    17.525] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    17.525] (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR3
[    17.525] (II) fglrx(0): PCIE card detected
[    17.525] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    17.525] (II) fglrx(0): board/chipset is supported by this driver (original ATI board)
[    17.542] (II) fglrx(0): Using adapter: 2:0.0.
[    17.575] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[    17.594] (II) fglrx(0): Interrupt handler installed at IRQ 43.
[    17.594] (II) fglrx(0): RandR 1.2 support is enabled!
[    17.594] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    17.594] (==) fglrx(0): Center Mode is disabled
[    17.594] (II) Loading sub module "fb"
[    17.594] (II) LoadModule: "fb"
[    17.595] (II) Loading /usr/lib/xorg/modules/libfb.so
[    17.607] (II) Module fb: vendor="X.Org Foundation"
[    17.607] compiled for 1.11.3, module version = 1.0.0
[    17.607] ABI class: X.Org ANSI C Emulation, version 0.4
[    17.608] (II) Loading sub module "ddc"
[    17.608] (II) LoadModule: "ddc"
[    17.608] (II) Module "ddc" already built-in
[    19.303] (II) fglrx(0): Finished Initialize PPLIB!
[    19.320] (II) fglrx(0): Output DFP1 has no monitor section
[    19.320] (II) fglrx(0): Output DFP2 has no monitor section
[    19.320] (II) fglrx(0): Output CRT1 has no monitor section
[    19.320] (II) fglrx(0): Output CRT2 has no monitor section
[    19.320] (II) fglrx(0): Output TV has no monitor section
[    19.320] (II) fglrx(0): Output CV has no monitor section
[    19.320] (II) Loading sub module "ddc"
[    19.320] (II) LoadModule: "ddc"
[    19.320] (II) Module "ddc" already built-in
[    19.320] (II) fglrx(0): Connected Display0: CRT1
[    19.320] (II) fglrx(0): Display0 EDID data ---------------------------
[    19.320] (II) fglrx(0): Manufacturer: MAX  Model: 6de  Serial#: 2572
[    19.320] (II) fglrx(0): Year: 2007  Week: 5
[    19.320] (II) fglrx(0): EDID Version: 1.3
[    19.320] (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    19.320] (II) fglrx(0): Sync:  Separate
[    19.320] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[    19.320] (II) fglrx(0): Gamma: 2.20
[    19.320] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[    19.320] (II) fglrx(0): First detailed timing is preferred mode
[    19.320] (II) fglrx(0): redX: 0.655 redY: 0.327   greenX: 0.273 greenY: 0.617
[    19.320] (II) fglrx(0): blueX: 0.144 blueY: 0.079   whiteX: 0.313 whiteY: 0.329
[    19.320] (II) fglrx(0): Supported established timings:
[    19.320] (II) fglrx(0): 720x400@70Hz
[    19.320] (II) fglrx(0): 640x480@60Hz
[    19.320] (II) fglrx(0): 640x480@67Hz
[    19.320] (II) fglrx(0): 640x480@72Hz
[    19.320] (II) fglrx(0): 640x480@75Hz
[    19.320] (II) fglrx(0): 800x600@56Hz
[    19.320] (II) fglrx(0): 800x600@60Hz
[    19.320] (II) fglrx(0): 800x600@72Hz
[    19.320] (II) fglrx(0): 800x600@75Hz
[    19.320] (II) fglrx(0): 832x624@75Hz
[    19.320] (II) fglrx(0): 1024x768@60Hz
[    19.320] (II) fglrx(0): 1024x768@70Hz
[    19.320] (II) fglrx(0): 1024x768@75Hz
[    19.320] (II) fglrx(0): 1280x1024@75Hz
[    19.320] (II) fglrx(0): 1152x864@75Hz
[    19.320] (II) fglrx(0): Manufacturer's mask: 0
[    19.320] (II) fglrx(0): Supported standard timings:
[    19.320] (II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    19.320] (II) fglrx(0): #1: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    19.320] (II) fglrx(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    19.320] (II) fglrx(0): Supported detailed timing:
[    19.320] (II) fglrx(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[    19.320] (II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    19.320] (II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    19.320] (II) fglrx(0): Serial No: 070502572
[    19.320] (II) fglrx(0): Ranges: V min: 50 V max: 77 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[    19.320] (II) fglrx(0): Monitor name: Belinea1745S1
[    19.320] (II) fglrx(0): EDID (in hex):
[    19.320] (II) fglrx(0): 00ffffffffffff003438de060c0a0000
[    19.320] (II) fglrx(0): 0511010368221b782af0d5a753469e24
[    19.320] (II) fglrx(0): 145054bfef808180714f814001010101
[    19.320] (II) fglrx(0): 010101010101302a009851002a403070
[    19.320] (II) fglrx(0): 1300520e1100001e000000ff00303730
[    19.320] (II) fglrx(0): 3530323537320a202020000000fd0032
[    19.320] (II) fglrx(0): 4d1e530e000a202020202020000000fc
[    19.320] (II) fglrx(0): 0042656c696e6561313734355331001c
[    19.320] (II) fglrx(0): End of Display0 EDID data --------------------
[    19.606] (II) fglrx(0): EDID for output DFP1
[    19.606] (II) fglrx(0): EDID for output DFP2
[    19.607] (II) fglrx(0): EDID for output CRT1
[    19.607] (II) fglrx(0): Manufacturer: MAX  Model: 6de  Serial#: 2572
[    19.607] (II) fglrx(0): Year: 2007  Week: 5
[    19.607] (II) fglrx(0): EDID Version: 1.3
[    19.607] (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    19.607] (II) fglrx(0): Sync:  Separate
[    19.607] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[    19.607] (II) fglrx(0): Gamma: 2.20
[    19.607] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[    19.607] (II) fglrx(0): First detailed timing is preferred mode
[    19.607] (II) fglrx(0): redX: 0.655 redY: 0.327   greenX: 0.273 greenY: 0.617
[    19.607] (II) fglrx(0): blueX: 0.144 blueY: 0.079   whiteX: 0.313 whiteY: 0.329
[    19.607] (II) fglrx(0): Supported established timings:
[    19.607] (II) fglrx(0): 720x400@70Hz
[    19.607] (II) fglrx(0): 640x480@60Hz
[    19.607] (II) fglrx(0): 640x480@67Hz
[    19.607] (II) fglrx(0): 640x480@72Hz
[    19.607] (II) fglrx(0): 640x480@75Hz
[    19.607] (II) fglrx(0): 800x600@56Hz
[    19.607] (II) fglrx(0): 800x600@60Hz
[    19.607] (II) fglrx(0): 800x600@72Hz
[    19.607] (II) fglrx(0): 800x600@75Hz
[    19.607] (II) fglrx(0): 832x624@75Hz
[    19.607] (II) fglrx(0): 1024x768@60Hz
[    19.607] (II) fglrx(0): 1024x768@70Hz
[    19.607] (II) fglrx(0): 1024x768@75Hz
[    19.607] (II) fglrx(0): 1280x1024@75Hz
[    19.607] (II) fglrx(0): 1152x864@75Hz
[    19.607] (II) fglrx(0): Manufacturer's mask: 0
[    19.607] (II) fglrx(0): Supported standard timings:
[    19.607] (II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    19.607] (II) fglrx(0): #1: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    19.607] (II) fglrx(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    19.607] (II) fglrx(0): Supported detailed timing:
[    19.607] (II) fglrx(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[    19.607] (II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    19.607] (II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    19.607] (II) fglrx(0): Serial No: 070502572
[    19.607] (II) fglrx(0): Ranges: V min: 50 V max: 77 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[    19.607] (II) fglrx(0): Monitor name: Belinea1745S1
[    19.607] (II) fglrx(0): EDID (in hex):
[    19.607] (II) fglrx(0): 00ffffffffffff003438de060c0a0000
[    19.607] (II) fglrx(0): 0511010368221b782af0d5a753469e24
[    19.607] (II) fglrx(0): 145054bfef808180714f814001010101
[    19.607] (II) fglrx(0): 010101010101302a009851002a403070
[    19.607] (II) fglrx(0): 1300520e1100001e000000ff00303730
[    19.607] (II) fglrx(0): 3530323537320a202020000000fd0032
[    19.607] (II) fglrx(0): 4d1e530e000a202020202020000000fc
[    19.607] (II) fglrx(0): 0042656c696e6561313734355331001c
[    19.607] (II) fglrx(0): Printing probed modes for output CRT1
[    19.607] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
[    19.607] (II) fglrx(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 -hsync -vsync (80.0 kHz)
[    19.607] (II) fglrx(0): Modeline "1280x960"x75.0  129.86  1280 1368 1504 1728  960 961 964 1002 +hsync -vsync (75.2 kHz)
[    19.607] (II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 -hsync -vsync (60.0 kHz)
[    19.607] (II) fglrx(0): Modeline "1280x800"x75.0  107.21  1280 1360 1496 1712  800 801 804 835 +hsync -vsync (62.6 kHz)
[    19.607] (II) fglrx(0): Modeline "1280x800"x60.0   83.46  1280 1344 1480 1680  800 801 804 828 +hsync -vsync (49.7 kHz)
[    19.607] (II) fglrx(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 -hsync -vsync (67.5 kHz)
[    19.607] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 +hsync -vsync (53.7 kHz)
[    19.607] (II) fglrx(0): Modeline "1280x768"x75.0  102.25  1280 1360 1488 1696  768 771 778 805 +hsync -vsync (60.3 kHz)
[    19.607] (II) fglrx(0): Modeline "1280x768"x60.0   79.50  1280 1344 1472 1664  768 771 778 798 +hsync -vsync (47.8 kHz)
[    19.607] (II) fglrx(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 -hsync -vsync (45.0 kHz)
[    19.607] (II) fglrx(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 -hsync -vsync (60.0 kHz)
[    19.607] (II) fglrx(0): Modeline "1024x768"x70.0   75.00  1024 1048 1184 1328  768 771 777 806 +hsync +vsync (56.5 kHz)
[    19.607] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync (48.4 kHz)
[    19.607] (II) fglrx(0): Modeline "800x600"x72.0   50.00  800 856 976 1040  600 637 643 666 -hsync -vsync (48.1 kHz)
[    19.607] (II) fglrx(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 -hsync -vsync (46.9 kHz)
[    19.607] (II) fglrx(0): Modeline "800x600"x70.0   45.50  800 840 920 1040  600 601 604 625 +hsync -vsync (43.8 kHz)
[    19.607] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 -hsync -vsync (37.9 kHz)
[    19.607] (II) fglrx(0): Modeline "800x600"x56.0   36.00  800 824 896 1024  600 601 603 625 -hsync -vsync (35.2 kHz)
[    19.607] (II) fglrx(0): Modeline "720x480"x60.0   26.71  720 736 808 896  480 481 484 497 +hsync -vsync (29.8 kHz)
[    19.607] (II) fglrx(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 +hsync +vsync (37.5 kHz)
[    19.607] (II) fglrx(0): Modeline "640x480"x72.0   31.50  640 656 696 832  480 481 484 520 +hsync +vsync (37.9 kHz)
[    19.607] (II) fglrx(0): Modeline "640x480"x60.0   25.18  640 648 744 800  480 482 484 525 +hsync +vsync (31.5 kHz)
[    19.607] (II) fglrx(0): EDID for output CRT2
[    19.607] (II) fglrx(0): EDID for output TV
[    19.607] (II) fglrx(0): EDID for output CV
[    19.607] (II) fglrx(0): Output DFP1 disconnected
[    19.607] (II) fglrx(0): Output DFP2 disconnected
[    19.607] (II) fglrx(0): Output CRT1 connected
[    19.607] (II) fglrx(0): Output CRT2 disconnected
[    19.607] (II) fglrx(0): Output TV disconnected
[    19.607] (II) fglrx(0): Output CV disconnected
[    19.607] (II) fglrx(0): Using exact sizes for initial modes
[    19.607] (II) fglrx(0): Output CRT1 using initial mode 1280x1024
[    19.607] (II) fglrx(0): DPI set to (96, 96)
[    19.607] (II) fglrx(0): Adapter ATI Radeon HD 4800 Series          has 2 configurable heads and 1 displays connected.
[    19.607] (==) fglrx(0):  PseudoColor visuals disabled
[    19.607] (II) Loading sub module "ramdac"
[    19.607] (II) LoadModule: "ramdac"
[    19.607] (II) Module "ramdac" already built-in
[    19.607] (==) fglrx(0): NoDRI = NO
[    19.607] (==) fglrx(0): Capabilities: 0x00000000
[    19.607] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    19.607] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    19.607] (==) fglrx(0): UseFastTLS=0
[    19.607] (==) fglrx(0): BlockSignalsOnLock=1
[    19.607] (II) UnloadModule: "radeon"
[    19.607] (II) Unloading radeon
[    19.607] (II) UnloadModule: "vesa"
[    19.607] (II) Unloading vesa
[    19.607] (II) UnloadModule: "fbdev"
[    19.607] (II) Unloading fbdev
[    19.607] (II) UnloadModule: "fbdevhw"
[    19.607] (II) Unloading fbdevhw
[    19.607] (--) Depth 24 pixmap format is 32 bpp
[    19.608] (II) Loading extension ATIFGLRXDRI
[    19.608] (II) fglrx(0): doing swlDriScreenInit
[    19.608] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    19.608] ukiDynamicMajor: found major device number 250
[    19.608] ukiDynamicMajor: found major device number 250
[    19.608] ukiDynamicMajor: found major device number 250
[    19.608] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[    19.608] ukiOpenDevice: node name is /dev/ati/card0
[    19.608] ukiOpenDevice: open result is 17, (OK)
[    19.608] ukiOpenByBusid: ukiOpenMinor returns 17
[    19.608] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[    19.608] (II) fglrx(0): [uki] DRM interface version 1.0
[    19.608] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[    19.608] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    19.608] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb5d83000
[    19.608] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    19.608] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    19.608] (II) fglrx(0): swlDriScreenInit done
[    19.608] (II) fglrx(0): Kernel Module Version Information:
[    19.608] (II) fglrx(0):     Name: fglrx
[    19.608] (II) fglrx(0):     Version: 8.97.2
[    19.608] (II) fglrx(0):     Date: Nov 16 2012
[    19.608] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[    19.608] (II) fglrx(0): Kernel Module version matches driver.
[    19.608] (II) fglrx(0): Kernel Module Build Time Information:
[    19.608] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.2.0-59-generic-pae
[    19.608] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[    19.608] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[    19.608] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    19.608] (II) fglrx(0): [uki] register handle = 0x00004000
[    19.628] (II) fglrx(0): DRI initialization successfull
[    19.633] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[    19.638] (==) fglrx(0): Backing store disabled
[    19.638] (II) Loading extension FGLRXEXTENSION
[    19.638] (==) fglrx(0): DPMS enabled
[    19.638] (II) fglrx(0): Initialized in-driver Xinerama extension
[    19.638] (**) fglrx(0): Textured Video is enabled.
[    19.638] (II) LoadModule: "glesx"
[    19.638] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/glesx.so
[    19.718] (II) Module glesx: vendor="X.Org Foundation"
[    19.718] compiled for 1.4.99.906, module version = 1.0.0
[    19.718] (II) Loading extension GLESX
[    19.718] (II) fglrx(0): GLESX enableFlags = 528
[    19.719] (II) fglrx(0): GLESX is enabled
[    19.719] (II) LoadModule: "amdxmm"
[    19.719] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/amdxmm.so
[    19.726] (II) Module amdxmm: vendor="X.Org Foundation"
[    19.726] compiled for 1.4.99.906, module version = 2.0.0
[    19.726] (II) Loading extension AMDXVOPL
[    19.726] (II) Loading extension AMDXVBA
[    19.738] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[    19.742] (II) fglrx(0): Enable composite support successfully
[    19.742] (II) fglrx(0): X context handle = 0x1
[    19.742] (II) fglrx(0): [DRI] installation complete
[    19.742] (==) fglrx(0): Silken mouse enabled
[    19.742] (==) fglrx(0): Using HW cursor of display infrastructure!
[    19.742] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    19.743] (II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
[    19.743] (II) fglrx(0): Cannot set TV horizontal size.
[    19.743] (II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed.
[    19.743] (II) fglrx(0): Cannot set TV horizontal position.
[    19.743] (II) fglrx(0): Cannot set TV vertical position.
[    19.825] (--) RandR disabled
[    19.825] (II) Initializing built-in extension Generic Event Extension
[    19.825] (II) Initializing built-in extension SHAPE
[    19.825] (II) Initializing built-in extension MIT-SHM
[    19.825] (II) Initializing built-in extension XInputExtension
[    19.825] (II) Initializing built-in extension XTEST
[    19.825] (II) Initializing built-in extension BIG-REQUESTS
[    19.825] (II) Initializing built-in extension SYNC
[    19.825] (II) Initializing built-in extension XKEYBOARD
[    19.825] (II) Initializing built-in extension XC-MISC
[    19.825] (II) Initializing built-in extension SECURITY
[    19.825] (II) Initializing built-in extension XINERAMA
[    19.825] (II) Initializing built-in extension XFIXES
[    19.825] (II) Initializing built-in extension RENDER
[    19.825] (II) Initializing built-in extension RANDR
[    19.825] (II) Initializing built-in extension COMPOSITE
[    19.825] (II) Initializing built-in extension DAMAGE
[    19.849] ukiDynamicMajor: found major device number 250
[    19.849] ukiDynamicMajor: found major device number 250
[    19.849] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[    19.849] ukiOpenDevice: node name is /dev/ati/card0
[    19.849] ukiOpenDevice: open result is 19, (OK)
[    19.849] ukiOpenByBusid: ukiOpenMinor returns 19
[    19.849] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[    20.458] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    20.458] (II) fglrx(0): Enable the clock gating!
[    20.458] (II) fglrx(0): Setting screen physical size to 338 x 270
[    20.597] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    20.606] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    20.606] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.606] (II) LoadModule: "evdev"
[    20.615] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.640] (II) Module evdev: vendor="X.Org Foundation"
[    20.640] compiled for 1.11.3, module version = 2.7.0
[    20.640] Module class: X.Org XInput Driver
[    20.640] ABI class: X.Org XInput driver, version 16.0
[    20.640] (II) Using input driver 'evdev' for 'Power Button'
[    20.640] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.640] (**) Power Button: always reports core events
[    20.640] (**) evdev: Power Button: Device: "/dev/input/event1"
[    20.640] (--) evdev: Power Button: Vendor 0 Product 0x1
[    20.640] (--) evdev: Power Button: Found keys
[    20.640] (II) evdev: Power Button: Configuring as keyboard
[    20.640] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    20.640] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    20.640] (**) Option "xkb_rules" "evdev"
[    20.640] (**) Option "xkb_model" "pc105"
[    20.640] (**) Option "xkb_layout" "pl"
[    20.642] (II) XKB: reuse xkmfile /var/lib/xkb/server-61818C6B46DD4F01AE1F641F27B555591612208F.xkm
[    20.651] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    20.651] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.651] (II) Using input driver 'evdev' for 'Power Button'
[    20.651] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.651] (**) Power Button: always reports core events
[    20.651] (**) evdev: Power Button: Device: "/dev/input/event0"
[    20.651] (--) evdev: Power Button: Vendor 0 Product 0x1
[    20.651] (--) evdev: Power Button: Found keys
[    20.651] (II) evdev: Power Button: Configuring as keyboard
[    20.651] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    20.651] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    20.651] (**) Option "xkb_rules" "evdev"
[    20.651] (**) Option "xkb_model" "pc105"
[    20.651] (**) Option "xkb_layout" "pl"
[    20.652] (II) config/udev: Adding input device USB Mouse (/dev/input/event3)
[    20.652] (**) USB Mouse: Applying InputClass "evdev pointer catchall"
[    20.652] (II) Using input driver 'evdev' for 'USB Mouse'
[    20.652] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.652] (**) USB Mouse: always reports core events
[    20.652] (**) evdev: USB Mouse: Device: "/dev/input/event3"
[    20.652] (--) evdev: USB Mouse: Vendor 0x4f3 Product 0x216
[    20.652] (--) evdev: USB Mouse: Found 9 mouse buttons
[    20.652] (--) evdev: USB Mouse: Found scroll wheel(s)
[    20.652] (--) evdev: USB Mouse: Found relative axes
[    20.652] (--) evdev: USB Mouse: Found x and y relative axes
[    20.652] (II) evdev: USB Mouse: Configuring as mouse
[    20.652] (II) evdev: USB Mouse: Adding scrollwheel support
[    20.652] (**) evdev: USB Mouse: YAxisMapping: buttons 4 and 5
[    20.652] (**) evdev: USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    20.652] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input3/event3"
[    20.652] (II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE, id 8)
[    20.652] (II) evdev: USB Mouse: initialized for relative axes.
[    20.652] (**) USB Mouse: (accel) keeping acceleration scheme 1
[    20.652] (**) USB Mouse: (accel) acceleration profile 0
[    20.652] (**) USB Mouse: (accel) acceleration factor: 2.000
[    20.652] (**) USB Mouse: (accel) acceleration threshold: 4
[    20.653] (II) config/udev: Adding input device USB Mouse (/dev/input/mouse0)
[    20.653] (II) No input driver specified, ignoring this device.
[    20.653] (II) This device may have been added with another device file.
[    20.653] (II) config/udev: Adding input device HDA NVidia Line-Out Surround (/dev/input/event10)
[    20.653] (II) No input driver specified, ignoring this device.
[    20.653] (II) This device may have been added with another device file.
[    20.653] (II) config/udev: Adding input device HDA NVidia Line-Out Front (/dev/input/event11)
[    20.653] (II) No input driver specified, ignoring this device.
[    20.653] (II) This device may have been added with another device file.
[    20.653] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event4)
[    20.653] (II) No input driver specified, ignoring this device.
[    20.653] (II) This device may have been added with another device file.
[    20.653] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event5)
[    20.653] (II) No input driver specified, ignoring this device.
[    20.653] (II) This device may have been added with another device file.
[    20.654] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event6)
[    20.654] (II) No input driver specified, ignoring this device.
[    20.654] (II) This device may have been added with another device file.
[    20.654] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event7)
[    20.654] (II) No input driver specified, ignoring this device.
[    20.654] (II) This device may have been added with another device file.
[    20.654] (II) config/udev: Adding input device HDA NVidia Line-Out Side (/dev/input/event8)
[    20.654] (II) No input driver specified, ignoring this device.
[    20.654] (II) This device may have been added with another device file.
[    20.654] (II) config/udev: Adding input device HDA NVidia Line-Out CLFE (/dev/input/event9)
[    20.654] (II) No input driver specified, ignoring this device.
[    20.654] (II) This device may have been added with another device file.
[    20.654] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event12)
[    20.654] (II) No input driver specified, ignoring this device.
[    20.654] (II) This device may have been added with another device file.
[    20.655] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    20.655] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    20.655] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    20.655] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.655] (**) AT Translated Set 2 keyboard: always reports core events
[    20.655] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[    20.655] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    20.655] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    20.655] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    20.655] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    20.655] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    20.655] (**) Option "xkb_rules" "evdev"
[    20.655] (**) Option "xkb_model" "pc105"
[    20.655] (**) Option "xkb_layout" "pl"
[    20.731] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    31.388] (II) fglrx(0): EDID vendor "MAX", prod id 1758
[    31.388] (II) fglrx(0): Using EDID range info for horizontal sync
[    31.388] (II) fglrx(0): Using EDID range info for vertical refresh
[    31.388] (II) fglrx(0): Printing DDC gathered Modelines:
[    31.388] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    31.388] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    31.388] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    31.388] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    31.388] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    31.388] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    31.388] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    31.388] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    31.388] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    31.388] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    31.388] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    31.388] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    31.388] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    31.388] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    31.388] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    31.388] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    31.388] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    54.288] (II) fglrx(0): EDID vendor "MAX", prod id 1758
[    54.288] (II) fglrx(0): Using hsync ranges from config file
[    54.288] (II) fglrx(0): Using vrefresh ranges from config file
[    54.288] (II) fglrx(0): Printing DDC gathered Modelines:
[    54.288] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    54.288] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    54.288] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    54.288] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    54.288] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    54.288] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    54.288] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    54.288] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    54.288] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    54.288] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    54.288] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    54.288] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    54.288] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    54.288] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    54.288] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    54.288] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    54.288] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    74.064] (II) AIGLX: Suspending AIGLX clients for VT switch
[    74.064] (II) fglrx(0): Backup framebuffer data.
[    74.108] (II) fglrx(0): Backup complete.
SAW