Zgodność sprzętu z Linuksem > Drukarki
HP DeskJet 5940 w Manjaro
:
Witam!
Mam problem z instalacją mojej drukarki.
Zastosowałem się do porady z http://forum.openlinux.pl/watek-Manjaro-a-instalacja-drukarki
Moja drukarka połączona jest przez kabel USB.
Gdy wpisuję hp-check to dostaję:
--- Kod: ---
[root@piotrek-lenovo /]# hp-check
Saving output in log file: /hp-check.log
HP Linux Imaging and Printing System (ver. 3.13.11)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: manjarolinux distro is not found in AUTH_TYPES
warning: unknown-0.0 version is not supported. Using unknown-0 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 3.10.22-1-MANJARO #1 SMP Wed Dec 4 22:15:26 UTC 2013 GNU/Linux
Host: piotrek-lenovo
Proc: 3.10.22-1-MANJARO #1 SMP Wed Dec 4 22:15:26 UTC 2013 GNU/Linux
Distribution: unknown 0.0
Bitness: 32 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.13.11
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for unknown distro 0.0 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.13.11
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.13.11
html=/usr/share/doc/hplip-3.13.11
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=yes
internal-tag=3.13.11
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
lite-build=no
udev-acl-rules=yes
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.13.11
Current contents of '~/.hplip/hplip.conf' file:
warning: Could not access file: Nie ma takiego pliku ani katalogu
--------------------------
| External Dependencies |
--------------------------
policykit Admin-Policy-framework OPTIONAL - 0.112 OK -
gs Ghostscript REQUIRED 7.05 9.10 OK -
network Network-wget OPTIONAL - 1.14 OK -
scanimage Shell-Scanning OPTIONAL 1.0 1.0.24 OK -
avahi-utils avahi-utils OPTIONAL - 0.6.31 OK -
dbus DBus REQUIRED - 1.6.18 OK -
error: cups CUPS REQUIRED 1.1 1.7.0 MISSING 'CUPS may not be installed or not running'
error: xsane SANE-GUI OPTIONAL 0.9 - MISSING 'xsane needs to be installed'
-------------------------
| General Dependencies |
-------------------------
error: reportlab Python-PDF-Lib OPTIONAL 2.0 - MISSING 'reportlab needs to be installed'
libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 OK -
error: pil Python-Image-Lib OPTIONAL - - MISSING 'pil needs to be installed'
error: pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 - MISSING 'pyqt4-dbus needs to be installed'
libjpeg JPEG-Lib REQUIRED - - OK -
libpthread POSIX-Threads-Lib REQUIRED - 2.18 OK -
python-dbus Python-DBUS REQUIRED 0.80.0 1.2.0 OK -
python-devel Python-SDK REQUIRED 2.2 3.3.3 OK -
error: pyqt4 Python-Qt4 REQUIRED 4.0 - MISSING -
cups-devel CUPS-SDK REQUIRED - 1.7.0 OK -
sane-devel SANE-SDK REQUIRED - 1.0.24 OK -
libusb USB-Lib REQUIRED - 1.0 OK -
sane Scan-Lib REQUIRED - 1.0.24 OK -
cups-image CUPS-Image-Lib REQUIRED - 1.7.0 OK -
libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 5.7.2 OK -
python-xml Python-XML-Lib REQUIRED - 2.1.0 OK -
python-notify Desktop-notifications OPTIONAL - - OK -
------------------------------
| Compile Time Dependencies |
------------------------------
gcc gcc-Compiler REQUIRED - 4.8.2 OK -
libtool Build-tools REQUIRED - 2.4.2 OK -
make GNU-Build-tools REQUIRED 3.0 4.0 OK -
----------------------
| Python Extentions |
----------------------
cupsext CUPS-Extension REQUIRED - 3.13.11 OK -
pcardext PhotoCard-Extension REQUIRED - 3.13.11 OK -
hpmudext IO-Extension REQUIRED - 3.13.11 OK -
-----------------------
| Scan Configuration |
-----------------------
hpaio HPLIP-SANE-Backend REQUIRED - 3.13.11 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.13.11 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
Created directory: /var/net-snmp
Created directory: /var/net-snmp/mib_indexes
device `v4l:/dev/video0' is a Noname Integrated Camera virtual device
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------- ----------------------
hp:/usb/Deskjet_5900_series?seri HP Deskjet 5900 series
al=CN6811T1TY04KF
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
lpstat
------
Type: Unknown
Device URI: B??dny deskryptor pliku
--------------
| PERMISSION |
--------------
USB None Required - - OK Node:'/dev/bus/usb/001/002' Perm:' root lp rw- rw- rw- rw- r--'
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
None
Missing Optional Dependencies
-----------------------------
None
Total Errors: 6
Total Warnings: 1
Done.
--- Koniec kodu ---
Oczywiście pakiety cups, ghostscript, gsfonts, hplip są zainstalowane.
Proszę o pomoc!
1709:
--- Cytuj ---warning: HPLIP-Installation: Auto installation is not supported for unknown distro 0.0 version
--- Koniec cytatu ---
Nie znam tego systemu ale wydaje mi się że powinieneś zgłosić owy problem,
żeby ktoś
zrobił działający pakiet dla tej dystrybucji, albo pomógł Ci zrobić.
Inny sposób instalacji:
http://www.hotfix.pl/instalacja-sterownika-hplip-dla-drukarek-hp-linux-a265.htm
http://hplipopensource.com/node/309
:
Manjaro jest kompatybilny z Archem, po za tym jak to ktoś nazwał "okiełznany arch" :D
1709:
Możesz jeszcze skorzystać z wiki archa
https://wiki.archlinux.org/index.php/CUPS_%28Polski%29
PS: Polecam też na wiki zaznaczyć język angielski
-wersja angielska jest często bardziej zaktualizowana.
Moze sie przydać: http://translate.google.pl/
Aczkolwiek developerzy aplikacji nie zawsze tworzą prosty system instalacji,
czy też kompilacji. Dla developerów piszących instrukcje dla
pliku .spec czy .PKGBUILD potrzebnych do zbudowania paczki też może być to problem.
Drobna różnica w systemach, lub brak zainstalowanych zależności,
lub różnice w wersjach zainstalowanych pakietów może spowodować błąd.
:
U mnie np.
--- Kod: ---
# /etc/rc.d/cups start
--- Koniec kodu ---
nie działa aczkolwiek wszystko tak samo jak w archu.
Nawigacja
[#] Następna strona
Idź do wersji pełnej