Nowe posty

xx Debian 9 Stretch, linuxcnc i restart przy uruchamianiu (1)
Wczoraj o 11:09:50
xx Zakup sprzętu bez preinstalowanego windowsa (8)
2019-10-17, 16:50:51
xx Problem z pocztą Dovecot+Postfix+MySQL (3)
2019-10-16, 14:43:41
xx Instalacja Debian10 problem z instalacją GRUBa na RAID5 (5)
2019-10-15, 17:58:57
xx AMD Ryzen 5 3500U (11)
2019-10-14, 18:29:46
xx Konfiguracja directadmina (0)
2019-10-13, 03:18:36
xx Problem z instalacją sterowników TL-WN821N (4)
2019-10-11, 23:15:00
xx Sprzet z Linuxem (1)
2019-10-11, 10:06:24
xx nadpisanie partycji domowej (6)
2019-10-03, 03:27:28
xx Screen flickering Deepin (4)
2019-10-02, 20:32:56

Autor Wątek: 2 monitory - problem z LCD (VGA) na DVI  (Przeczytany 4467 razy)

Offline

  • Users
  • Nowy na forum
  • *
  • Wiadomości: 3
    • Zobacz profil
2 monitory - problem z LCD (VGA) na DVI
« dnia: 2013-09-20, 18:47:39 »
Witam,
z uwagi na to, że jestem tu początkujący, toteż proszę o wyrozumiałość gdyż gdybym był w stanie sam sobie poradzić z tym problemem to dawno bym tego dokonał i nie zawracał bym Wam głowy...

A więc tak... Mam 2 monitory - pierwszy standardowy CRT (Samsung SyncMaster 795df) i drugi LCD (LG Flatron L1715s). Podłączone są do karty graficznej ASUS GeForce 210 (NVIDIA). CRT standardowo pod VGA (D-SUB) a LCD pod DVI ale przez adapter VGA (D-SUB) - DVI.

Na początku miałem problemy z monitorem podłączonym przez adapter bo obraz co chwilę się wyłączał więc przeinstalowałem sterowniki NVIDII i tu zaczęły się problemy. Przed instalacją sterowników monitor LCD miał spokojnie rozdzielczość 1024x768 (mimo iż może mieć większą) a po instalacji jedyne co może osiągnąć to 640x480. Poczytałem na kilku forach, że jest to ponoć związane z adapterem i że DVI nie odbiera sygnałów cyfrowych od LCD. Próbowałem zmienić ustawienia według tamtych porad ale w chwili kiedy uruchomiłem Linuxa ponownie i rozdzielczość na obu monitorach była 640x480 pixeli to stwierdziłem, że jednak sam nie dam rady. Przywróciłem konfigurację do poprzedniej i obecnie mam CRT 1280x1024 oraz LCD 640x480 a chciałbym aby oba miały taką samą.

W związku z tym mam prośbę do Was związaną z konfiguracją - jak dokonać tego aby oba monitory działały z normalnymi możliwościami bo wiem że jest to możliwe.

Z dodatkowych informacji dodam, że pod Winzgrozą oba monitory mają normalne rozdzielczości a jadą na standardowych sterownikach z Winzgrozy 7.

log z /var/log/Xorg.0.log :

[    22.103] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    22.103] X Protocol Version 11, Revision 0
[    22.103] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
[    22.103] Current Operating System: Linux Frankenstein-PC 3.2.0-4-686-pae #1 SMP Debian 3.2.46-1+deb7u1 i686
[    22.103] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-686-pae root=UUID=61a1e2b0-442c-4532-8e17-3d1dcdaa8c81 ro quiet
[    22.103] Build Date: 17 April 2013  11:13:16AM
[    22.103] xorg-server 2:1.12.4-6 (Julien Cristau )
[    22.103] Current version of pixman: 0.26.0
[    22.103] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    22.103] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    22.103] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 18 20:55:13 2013
[    22.137] (==) Using config file: "/etc/X11/xorg.conf"
[    22.137] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    22.350] (==) ServerLayout "Layout0"
[    22.350] (**) |-->Screen "Screen0" (0)
[    22.350] (**) |   |-->Monitor "Monitor0"
[    22.351] (**) |   |-->Device "Device0"
[    22.351] (**) |-->Input Device "Keyboard0"
[    22.351] (**) |-->Input Device "Mouse0"
[    22.351] (**) Option "Xinerama" "0"
[    22.351] (==) Automatically adding devices
[    22.351] (==) Automatically enabling devices
[    22.421] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    22.421] Entry deleted from font path.
[    22.440] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    22.440] Entry deleted from font path.
[    22.440] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[    22.440] (==) ModulePath set to "/usr/lib/xorg/modules"
[    22.440] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    22.440] (WW) Disabling Keyboard0
[    22.440] (WW) Disabling Mouse0
[    22.440] (II) Loader magic: 0xb77e55a0
[    22.440] (II) Module ABI versions:
[    22.440] X.Org ANSI C Emulation: 0.4
[    22.440] X.Org Video Driver: 12.1
[    22.440] X.Org XInput driver : 16.0
[    22.440] X.Org Server Extension : 6.0
[    22.441] (--) PCI:*(0:1:0:0) 10de:0a65:1043:83f4 rev 162, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xdc000000/33554432, I/O @ 0x00009c00/128, BIOS @ 0x????????/524288
[    22.441] (II) Open ACPI successful (/var/run/acpid.socket)
[    22.441] (II) LoadModule: "extmod"
[    22.463] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    22.476] (II) Module extmod: vendor="X.Org Foundation"
[    22.476] compiled for 1.12.4, module version = 1.0.0
[    22.476] Module class: X.Org Server Extension
[    22.476] ABI class: X.Org Server Extension, version 6.0
[    22.476] (II) Loading extension SELinux
[    22.476] (II) Loading extension MIT-SCREEN-SAVER
[    22.476] (II) Loading extension XFree86-VidModeExtension
[    22.476] (II) Loading extension XFree86-DGA
[    22.476] (II) Loading extension DPMS
[    22.477] (II) Loading extension XVideo
[    22.477] (II) Loading extension XVideo-MotionCompensation
[    22.477] (II) Loading extension X-Resource
[    22.477] (II) LoadModule: "dbe"
[    22.477] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    22.487] (II) Module dbe: vendor="X.Org Foundation"
[    22.487] compiled for 1.12.4, module version = 1.0.0
[    22.487] Module class: X.Org Server Extension
[    22.487] ABI class: X.Org Server Extension, version 6.0
[    22.487] (II) Loading extension DOUBLE-BUFFER
[    22.487] (II) LoadModule: "glx"
[    22.487] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    24.319] (II) Module glx: vendor="NVIDIA Corporation"
[    24.319] compiled for 4.0.2, module version = 1.0.0
[    24.319] Module class: X.Org Server Extension
[    24.319] (II) NVIDIA GLX Module  304.88  Wed Mar 27 14:51:59 PDT 2013
[    24.319] (II) Loading extension GLX
[    24.319] (II) LoadModule: "record"
[    24.319] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    24.504] (II) Module record: vendor="X.Org Foundation"
[    24.504] compiled for 1.12.4, module version = 1.13.0
[    24.504] Module class: X.Org Server Extension
[    24.504] ABI class: X.Org Server Extension, version 6.0
[    24.504] (II) Loading extension RECORD
[    24.504] (II) LoadModule: "dri"
[    24.504] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    24.569] (II) Module dri: vendor="X.Org Foundation"
[    24.569] compiled for 1.12.4, module version = 1.0.0
[    24.569] ABI class: X.Org Server Extension, version 6.0
[    24.569] (II) Loading extension XFree86-DRI
[    24.569] (II) LoadModule: "dri2"
[    24.569] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    24.571] (II) Module dri2: vendor="X.Org Foundation"
[    24.571] compiled for 1.12.4, module version = 1.2.0
[    24.571] ABI class: X.Org Server Extension, version 6.0
[    24.571] (II) Loading extension DRI2
[    24.571] (II) LoadModule: "nvidia"
[    24.622] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    24.833] (II) Module nvidia: vendor="NVIDIA Corporation"
[    24.833] compiled for 4.0.2, module version = 1.0.0
[    24.833] Module class: X.Org Video Driver
[    24.905] (II) NVIDIA dlloader X Driver  304.88  Wed Mar 27 14:32:42 PDT 2013
[    24.905] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    24.912] (++) using VT number 7

[    24.928] (II) Loading sub module "fb"
[    24.928] (II) LoadModule: "fb"
[    24.928] (II) Loading /usr/lib/xorg/modules/libfb.so
[    24.939] (II) Module fb: vendor="X.Org Foundation"
[    24.939] compiled for 1.12.4, module version = 1.0.0
[    24.939] ABI class: X.Org ANSI C Emulation, version 0.4
[    24.939] (II) Loading sub module "wfb"
[    24.939] (II) LoadModule: "wfb"
[    24.939] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    24.946] (II) Module wfb: vendor="X.Org Foundation"
[    24.946] compiled for 1.12.4, module version = 1.0.0
[    24.946] ABI class: X.Org ANSI C Emulation, version 0.4
[    24.946] (II) Loading sub module "ramdac"
[    24.946] (II) LoadModule: "ramdac"
[    24.946] (II) Module "ramdac" already built-in
[    24.956] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    24.956] (==) NVIDIA(0): RGB weight 888
[    24.956] (==) NVIDIA(0): Default visual is TrueColor
[    24.957] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    24.957] (**) NVIDIA(0): Option "Stereo" "0"
[    24.957] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "CRT-1"
[    24.957] (**) NVIDIA(0): Stereo disabled by request
[    24.962] (**) NVIDIA(0): Option "MetaModes" "CRT-1: 1280x1024_75 +0+0; CRT-0: 320x240 +0+0; CRT-0: nvidia-auto-select +0+0"
[    24.962] (**) NVIDIA(0): Enabling 2D acceleration
[    25.675] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[    25.690] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[    25.690] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    25.692] (II) NVIDIA(0): NVIDIA GPU GeForce 210 (GT218) at PCI:1:0:0 (GPU-0)
[    25.692] (--) NVIDIA(0): Memory: 1048576 kBytes
[    25.692] (--) NVIDIA(0): VideoBIOS: 70.18.5f.00.06
[    25.692] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    25.692] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    25.694] (--) NVIDIA(0): Valid display device(s) on GeForce 210 at PCI:1:0:0
[    25.694] (--) NVIDIA(0):     CRT-0 (connected)
[    25.694] (--) NVIDIA(0):     Samsung SyncMaster (CRT-1) (connected)
[    25.694] (--) NVIDIA(0):     DFP-0
[    25.694] (--) NVIDIA(0):     DFP-1
[    25.694] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    25.694] (--) NVIDIA(0): Samsung SyncMaster (CRT-1): 400.0 MHz maximum pixel clock
[    25.694] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[    25.694] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[    25.694] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[    25.694] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    25.694] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    25.694] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    25.694] (**) NVIDIA(0):     all display devices.)
[    25.695] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    25.695] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[    25.695] (**) NVIDIA(0):     has been enabled on all display devices.)
[    25.699] (II) NVIDIA(0): Validated MetaModes:
[    25.699] (II) NVIDIA(0):     "CRT-1:1280x1024_75+0+0"
[    25.699] (II) NVIDIA(0):     "CRT-0:320x240+0+0"
[    25.699] (II) NVIDIA(0):     "CRT-0:nvidia-auto-select+0+0"
[    25.699] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[    25.729] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[    25.729] (WW) NVIDIA(0):     from CRT-0's EDID.
[    25.729] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    25.729] (--) Depth 24 pixmap format is 32 bpp
[    25.729] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    25.743] (II) NVIDIA(0): Setting mode "CRT-1:1280x1024_75+0+0"
[    25.795] (II) Loading extension NV-GLX
[    25.828] (==) NVIDIA(0): Disabling shared memory pixmaps
[    25.828] (==) NVIDIA(0): Backing store disabled
[    25.828] (==) NVIDIA(0): Silken mouse enabled
[    25.829] (**) NVIDIA(0): DPMS enabled
[    25.829] (II) Loading extension NV-CONTROL
[    25.829] (II) Loading extension XINERAMA
[    25.829] (II) Loading sub module "dri2"
[    25.829] (II) LoadModule: "dri2"
[    25.829] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    25.829] (II) Module dri2: vendor="X.Org Foundation"
[    25.829] compiled for 1.12.4, module version = 1.2.0
[    25.829] ABI class: X.Org Server Extension, version 6.0
[    25.829] (II) NVIDIA(0): [DRI2] Setup complete
[    25.829] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    25.829] (--) RandR disabled
[    25.829] (II) Initializing built-in extension Generic Event Extension
[    25.829] (II) Initializing built-in extension SHAPE
[    25.829] (II) Initializing built-in extension MIT-SHM
[    25.829] (II) Initializing built-in extension XInputExtension
[    25.829] (II) Initializing built-in extension XTEST
[    25.829] (II) Initializing built-in extension BIG-REQUESTS
[    25.829] (II) Initializing built-in extension SYNC
[    25.829] (II) Initializing built-in extension XKEYBOARD
[    25.829] (II) Initializing built-in extension XC-MISC
[    25.829] (II) Initializing built-in extension SECURITY
[    25.830] (II) Initializing built-in extension XINERAMA
[    25.830] (II) Initializing built-in extension XFIXES
[    25.830] (II) Initializing built-in extension RENDER
[    25.830] (II) Initializing built-in extension RANDR
[    25.830] (II) Initializing built-in extension COMPOSITE
[    25.830] (II) Initializing built-in extension DAMAGE
[    25.830] (II) SELinux: Disabled on system
[    25.833] (II) Initializing extension GLX
[    26.130] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    26.130] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    26.130] (II) LoadModule: "evdev"
[    26.131] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    26.140] (II) Module evdev: vendor="X.Org Foundation"
[    26.140] compiled for 1.12.1, module version = 2.7.0
[    26.140] Module class: X.Org XInput Driver
[    26.140] ABI class: X.Org XInput driver, version 16.0
[    26.140] (II) Using input driver 'evdev' for 'Power Button'
[    26.140] (**) Power Button: always reports core events
[    26.140] (**) evdev: Power Button: Device: "/dev/input/event5"
[    26.140] (--) evdev: Power Button: Vendor 0 Product 0x1
[    26.140] (--) evdev: Power Button: Found keys
[    26.140] (II) evdev: Power Button: Configuring as keyboard
[    26.140] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[    26.140] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    26.140] (**) Option "xkb_rules" "evdev"
[    26.140] (**) Option "xkb_model" "evdev"
[    26.140] (**) Option "xkb_layout" "pl"
[    26.186] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    26.186] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    26.186] (II) Using input driver 'evdev' for 'Power Button'
[    26.186] (**) Power Button: always reports core events
[    26.186] (**) evdev: Power Button: Device: "/dev/input/event4"
[    26.186] (--) evdev: Power Button: Vendor 0 Product 0x1
[    26.186] (--) evdev: Power Button: Found keys
[    26.186] (II) evdev: Power Button: Configuring as keyboard
[    26.186] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event4"
[    26.186] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    26.186] (**) Option "xkb_rules" "evdev"
[    26.186] (**) Option "xkb_model" "evdev"
[    26.186] (**) Option "xkb_layout" "pl"
[    26.187] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event10)
[    26.187] (II) No input driver specified, ignoring this device.
[    26.187] (II) This device may have been added with another device file.
[    26.187] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event11)
[    26.187] (II) No input driver specified, ignoring this device.
[    26.187] (II) This device may have been added with another device file.
[    26.188] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event8)
[    26.188] (II) No input driver specified, ignoring this device.
[    26.188] (II) This device may have been added with another device file.
[    26.188] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event9)
[    26.188] (II) No input driver specified, ignoring this device.
[    26.188] (II) This device may have been added with another device file.
[    26.189] (II) config/udev: Adding input device  USB OPTICAL MOUSE (/dev/input/event0)
[    26.189] (**)  USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[    26.189] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[    26.189] (**)  USB OPTICAL MOUSE: always reports core events
[    26.189] (**) evdev:  USB OPTICAL MOUSE: Device: "/dev/input/event0"
[    26.189] (--) evdev:  USB OPTICAL MOUSE: Vendor 0x15d9 Product 0xa4e
[    26.189] (--) evdev:  USB OPTICAL MOUSE: Found 3 mouse buttons
[    26.189] (--) evdev:  USB OPTICAL MOUSE: Found scroll wheel(s)
[    26.189] (--) evdev:  USB OPTICAL MOUSE: Found relative axes
[    26.189] (--) evdev:  USB OPTICAL MOUSE: Found x and y relative axes
[    26.189] (II) evdev:  USB OPTICAL MOUSE: Configuring as mouse
[    26.189] (II) evdev:  USB OPTICAL MOUSE: Adding scrollwheel support
[    26.189] (**) evdev:  USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[    26.189] (**) evdev:  USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    26.189] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1:1.0/input/input0/event0"
[    26.189] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 8)
[    26.189] (II) evdev:  USB OPTICAL MOUSE: initialized for relative axes.
[    26.189] (**)  USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[    26.189] (**)  USB OPTICAL MOUSE: (accel) acceleration profile 0
[    26.189] (**)  USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[    26.189] (**)  USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[    26.189] (II) config/udev: Adding input device  USB OPTICAL MOUSE (/dev/input/mouse0)
[    26.189] (II) No input driver specified, ignoring this device.
[    26.189] (II) This device may have been added with another device file.
[    26.190] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/event1)
[    26.190] (**) Logitech Unifying Device. Wireless PID:101b: Applying InputClass "evdev pointer catchall"
[    26.190] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101b'
[    26.190] (**) Logitech Unifying Device. Wireless PID:101b: always reports core events
[    26.190] (**) evdev: Logitech Unifying Device. Wireless PID:101b: Device: "/dev/input/event1"
[    26.190] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Vendor 0x46d Product 0xc52b
[    26.190] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found 20 mouse buttons
[    26.190] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found scroll wheel(s)
[    26.190] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found relative axes
[    26.190] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
[    26.190] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Configuring as mouse
[    26.190] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Adding scrollwheel support
[    26.190] (**) evdev: Logitech Unifying Device. Wireless PID:101b: YAxisMapping: buttons 4 and 5
[    26.190] (**) evdev: Logitech Unifying Device. Wireless PID:101b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    26.190] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb2/2-2/2-2:1.2/0003:046D:C52B.0004/input/input1/event1"
[    26.190] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101b" (type: MOUSE, id 9)
[    26.190] (II) evdev: Logitech Unifying Device. Wireless PID:101b: initialized for relative axes.
[    26.190] (**) Logitech Unifying Device. Wireless PID:101b: (accel) keeping acceleration scheme 1
[    26.190] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration profile 0
[    26.190] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration factor: 2.000
[    26.190] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration threshold: 4
[    26.191] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/mouse1)
[    26.191] (II) No input driver specified, ignoring this device.
[    26.191] (II) This device may have been added with another device file.
[    26.191] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[    26.191] (II) No input driver specified, ignoring this device.
[    26.191] (II) This device may have been added with another device file.
[    26.192] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/event2)
[    26.192] (**) Plus More Enterprise LTD. USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[    26.192] (II) Using input driver 'evdev' for 'Plus More Enterprise LTD. USB-compliant keyboard'
[    26.192] (**) Plus More Enterprise LTD. USB-compliant keyboard: always reports core events
[    26.192] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Device: "/dev/input/event2"
[    26.192] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Vendor 0x518 Product 0x1
[    26.192] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found keys
[    26.192] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Configuring as keyboard
[    26.192] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/input/input2/event2"
[    26.192] (II) XINPUT: Adding extended input device "Plus More Enterprise LTD. USB-compliant keyboard" (type: KEYBOARD, id 10)
[    26.192] (**) Option "xkb_rules" "evdev"
[    26.192] (**) Option "xkb_model" "evdev"
[    26.192] (**) Option "xkb_layout" "pl"
[    26.193] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/event3)
[    26.193] (**) Plus More Enterprise LTD. USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[    26.193] (II) Using input driver 'evdev' for 'Plus More Enterprise LTD. USB-compliant keyboard'
[    26.193] (**) Plus More Enterprise LTD. USB-compliant keyboard: always reports core events
[    26.193] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Device: "/dev/input/event3"
[    26.193] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Vendor 0x518 Product 0x1
[    26.193] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found 1 mouse buttons
[    26.193] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found scroll wheel(s)
[    26.193] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found relative axes
[    26.193] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found x and y relative axes
[    26.193] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found absolute axes
[    26.193] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Forcing absolute x/y axes to exist.
[    26.193] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found keys
[    26.193] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Configuring as mouse
[    26.193] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Configuring as keyboard
[    26.193] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Adding scrollwheel support
[    26.193] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: YAxisMapping: buttons 4 and 5
[    26.193] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    26.193] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.1/input/input3/event3"
[    26.193] (II) XINPUT: Adding extended input device "Plus More Enterprise LTD. USB-compliant keyboard" (type: KEYBOARD, id 11)
[    26.193] (**) Option "xkb_rules" "evdev"
[    26.193] (**) Option "xkb_model" "evdev"
[    26.193] (**) Option "xkb_layout" "pl"
[    26.193] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: initialized for relative axes.
[    26.193] (WW) evdev: Plus More Enterprise LTD. USB-compliant keyboard: ignoring absolute axes.
[    26.193] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) keeping acceleration scheme 1
[    26.193] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration profile 0
[    26.193] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration factor: 2.000
[    26.193] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration threshold: 4
[    26.194] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/mouse2)
[    26.194] (II) No input driver specified, ignoring this device.
[    26.194] (II) This device may have been added with another device file.
[    26.194] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    26.194] (II) No input driver specified, ignoring this device.
[    26.194] (II) This device may have been added with another device file.
[   257.113] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[   257.113] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   257.113] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[   257.113] (**) NVIDIA(0):     all display devices.)
[   257.129] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[   257.129] (II) NVIDIA(GPU-0):     3D Vision stereo.
[   257.129] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   257.129] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[   257.129] (**) NVIDIA(0):     has been enabled on all display devices.)
[   257.153] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[   257.153] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   257.153] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[   257.153] (**) NVIDIA(0):     all display devices.)
[   257.169] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[   257.169] (II) NVIDIA(GPU-0):     3D Vision stereo.
[   257.169] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   257.169] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[   257.169] (**) NVIDIA(0):     has been enabled on all display devices.)
[   259.548] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[   259.548] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   259.548] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[   259.548] (**) NVIDIA(0):     all display devices.)
[   259.564] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[   259.564] (II) NVIDIA(GPU-0):     3D Vision stereo.
[   259.564] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   259.564] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[   259.564] (**) NVIDIA(0):     has been enabled on all display devices.)
[   310.969] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[   310.969] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   310.969] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[   310.969] (**) NVIDIA(0):     all display devices.)
[   310.985] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[   310.985] (II) NVIDIA(GPU-0):     3D Vision stereo.
[   310.985] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   310.985] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[   310.985] (**) NVIDIA(0):     has been enabled on all display devices.)
[ 28041.177] (II) Open ACPI successful (/var/run/acpid.socket)
[ 28041.230] (II) NVIDIA(0): Setting mode "CRT-1:1280x1024_75+0+0"
[ 28524.279] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 28524.279] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 28524.279] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[ 28524.279] (**) NVIDIA(0):     all display devices.)
[ 28524.325] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 28524.325] (II) NVIDIA(GPU-0):     3D Vision stereo.
[ 28524.325] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 28524.325] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 28524.325] (**) NVIDIA(0):     has been enabled on all display devices.)
[ 53843.174] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 53843.183] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 53843.183] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[ 53843.183] (**) NVIDIA(0):     all display devices.)
[ 53843.240] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 53843.240] (II) NVIDIA(GPU-0):     3D Vision stereo.
[ 53843.240] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 53843.240] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 53843.240] (**) NVIDIA(0):     has been enabled on all display devices.)
[ 71837.506] nvLock: client timed out, taking the lock
[ 71840.119] (II) Open ACPI successful (/var/run/acpid.socket)
[ 71840.287] (II) NVIDIA(0): Setting mode "CRT-1:1280x1024_75+0+0"
[ 87986.935] (II) Open ACPI successful (/var/run/acpid.socket)
[ 87987.067] (II) NVIDIA(0): Setting mode "CRT-1:1280x1024_75+0+0"
[ 90033.458] (II) Open ACPI successful (/var/run/acpid.socket)
[ 90033.510] (II) NVIDIA(0): Setting mode "CRT-1:1280x1024_75+0+0"
[ 93929.965] (WW) NVIDIA(0): Specified panning domain height of 360 is smaller than
[ 93929.965] (WW) NVIDIA(0):     viewport height 480; adjusting
[ 93930.170] (II) NVIDIA(0): Setting mode "CRT-1:1280x1024_75@1280x1024+640+0,CRT-0:640x480@640x480+0+0"
[ 93931.445] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 93931.700] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93931.700] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[ 93931.700] (**) NVIDIA(0):     all display devices.)
[ 93932.416] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 93932.416] (II) NVIDIA(GPU-0):     3D Vision stereo.
[ 93932.416] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93932.416] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 93932.416] (**) NVIDIA(0):     has been enabled on all display devices.)
[ 93932.459] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 93932.459] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93932.459] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[ 93932.459] (**) NVIDIA(0):     all display devices.)
[ 93932.476] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 93932.476] (II) NVIDIA(GPU-0):     3D Vision stereo.
[ 93932.476] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93932.476] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 93932.476] (**) NVIDIA(0):     has been enabled on all display devices.)
[ 93939.597] (II) NVIDIA(0): Setting mode "CRT-1:1280x1024_75+0+0"
[ 93939.722] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 93939.722] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93939.722] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[ 93939.722] (**) NVIDIA(0):     all display devices.)
[ 93939.740] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 93939.740] (II) NVIDIA(GPU-0):     3D Vision stereo.
[ 93939.740] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93939.740] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 93939.740] (**) NVIDIA(0):     has been enabled on all display devices.)
[ 93939.777] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 93939.777] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93939.777] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[ 93939.777] (**) NVIDIA(0):     all display devices.)
[ 93939.794] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 93939.794] (II) NVIDIA(GPU-0):     3D Vision stereo.
[ 93939.794] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93939.794] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 93939.794] (**) NVIDIA(0):     has been enabled on all display devices.)
[ 93939.925] (WW) NVIDIA(0): Specified panning domain height of 360 is smaller than
[ 93939.925] (WW) NVIDIA(0):     viewport height 480; adjusting
[ 93939.925] (WW) NVIDIA(0): Specified panning domain height of 360 is smaller than
[ 93939.925] (WW) NVIDIA(0):     viewport height 480; adjusting
[ 93948.333] (II) NVIDIA(0): Setting mode "CRT-0:640x480@640x480+0+0"
[ 93948.503] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 93948.503] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93948.503] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[ 93948.503] (**) NVIDIA(0):     all display devices.)
[ 93948.520] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 93948.520] (II) NVIDIA(GPU-0):     3D Vision stereo.
[ 93948.520] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93948.520] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 93948.520] (**) NVIDIA(0):     has been enabled on all display devices.)
[ 93948.620] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 93948.620] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93948.620] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[ 93948.620] (**) NVIDIA(0):     all display devices.)
[ 93948.636] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 93948.636] (II) NVIDIA(GPU-0):     3D Vision stereo.
[ 93948.636] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93948.636] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 93948.636] (**) NVIDIA(0):     has been enabled on all display devices.)
[ 93955.293] (II) NVIDIA(0): Setting mode "CRT-1:1280x1024_75+0+0"
[ 93955.356] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 93955.356] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93955.356] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[ 93955.356] (**) NVIDIA(0):     all display devices.)
[ 93955.372] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 93955.372] (II) NVIDIA(GPU-0):     3D Vision stereo.
[ 93955.372] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93955.372] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 93955.372] (**) NVIDIA(0):     has been enabled on all display devices.)
[ 93955.425] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 93955.426] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93955.426] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[ 93955.426] (**) NVIDIA(0):     all display devices.)
[ 93955.442] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 93955.442] (II) NVIDIA(GPU-0):     3D Vision stereo.
[ 93955.442] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93955.442] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 93955.442] (**) NVIDIA(0):     has been enabled on all display devices.)
[ 93955.952] (WW) NVIDIA(0): Specified panning domain height of 360 is smaller than
[ 93955.952] (WW) NVIDIA(0):     viewport height 480; adjusting
[ 94051.745] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select@1280x1024+0+0"
[ 94051.833] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 94051.833] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94051.833] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[ 94051.833] (**) NVIDIA(0):     all display devices.)
[ 94051.849] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 94051.849] (II) NVIDIA(GPU-0):     3D Vision stereo.
[ 94051.849] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94051.849] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 94051.849] (**) NVIDIA(0):     has been enabled on all display devices.)
[ 94052.033] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 94052.033] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94052.033] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[ 94052.033] (**) NVIDIA(0):     all display devices.)
[ 94052.049] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 94052.049] (II) NVIDIA(GPU-0):     3D Vision stereo.
[ 94052.049] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94052.049] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 94052.049] (**) NVIDIA(0):     has been enabled on all display devices.)
[ 94057.372] (II) NVIDIA(0): Setting mode "CRT-1:1280x1024_75+0+0"
[ 94057.475] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 94057.475] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94057.475] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[ 94057.475] (**) NVIDIA(0):     all display devices.)
[ 94057.491] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 94057.491] (II) NVIDIA(GPU-0):     3D Vision stereo.
[ 94057.492] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94057.492] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 94057.492] (**) NVIDIA(0):     has been enabled on all display devices.)
[ 94057.528] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 94057.528] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94057.528] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[ 94057.528] (**) NVIDIA(0):     all display devices.)
[ 94057.544] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 94057.544] (II) NVIDIA(GPU-0):     3D Vision stereo.
[ 94057.544] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94057.544] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 94057.544] (**) NVIDIA(0):     has been enabled on all display devices.)
[ 94057.666] (WW) NVIDIA(0): Specified panning domain height of 360 is smaller than
[ 94057.666] (WW) NVIDIA(0):     viewport height 480; adjusting
[ 94085.872] (WW) NVIDIA(0): Specified panning domain height of 360 is smaller than
[ 94085.872] (WW) NVIDIA(0):     viewport height 480; adjusting
[ 94085.992] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select@1280x1024+1280+0,CRT-1:1280x1024@1280x1024+0+0"
[ 94086.179] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 94086.179] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94086.179] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[ 94086.180] (**) NVIDIA(0):     all display devices.)
[ 94086.196] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 94086.196] (II) NVIDIA(GPU-0):     3D Vision stereo.
[ 94086.196] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94086.196] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 94086.196] (**) NVIDIA(0):     has been enabled on all display devices.)
[ 94086.279] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 94086.279] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94086.279] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[ 94086.279] (**) NVIDIA(0):     all display devices.)
[ 94086.295] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 94086.295] (II) NVIDIA(GPU-0):     3D Vision stereo.
[ 94086.295] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94086.295] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 94086.295] (**) NVIDIA(0):     has been enabled on all display devices.)
[ 94089.362] (WW) NVIDIA(0): Specified panning domain height of 360 is smaller than
[ 94089.362] (WW) NVIDIA(0):     viewport height 480; adjusting
[ 94089.363] (WW) NVIDIA(0): Specified panning domain height of 360 is smaller than
[ 94089.363] (WW) NVIDIA(0):     viewport height 480; adjusting
[ 95051.369] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 95051.369] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 95051.369] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[ 95051.369] (**) NVIDIA(0):     all display devices.)
[ 95051.386] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 95051.386] (II) NVIDIA(GPU-0):     3D Vision stereo.
[ 95051.386] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 95051.386] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 95051.386] (**) NVIDIA(0):     has been enabled on all display devices.)
[101910.284] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[101910.284] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.284] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[101910.284] (**) NVIDIA(0):     all display devices.)
[101910.303] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[101910.303] (II) NVIDIA(GPU-0):     3D Vision stereo.
[101910.303] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.303] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[101910.303] (**) NVIDIA(0):     has been enabled on all display devices.)
[101910.333] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[101910.333] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.333] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[101910.333] (**) NVIDIA(0):     all display devices.)
[101910.351] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[101910.351] (II) NVIDIA(GPU-0):     3D Vision stereo.
[101910.352] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.352] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[101910.352] (**) NVIDIA(0):     has been enabled on all display devices.)
[101910.384] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[101910.384] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.384] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[101910.384] (**) NVIDIA(0):     all display devices.)
[101910.400] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[101910.400] (II) NVIDIA(GPU-0):     3D Vision stereo.
[101910.400] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.400] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[101910.400] (**) NVIDIA(0):     has been enabled on all display devices.)
[101910.751] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[101910.751] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.751] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[101910.751] (**) NVIDIA(0):     all display devices.)
[101910.767] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[101910.767] (II) NVIDIA(GPU-0):     3D Vision stereo.
[101910.767] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.767] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[101910.767] (**) NVIDIA(0):     has been enabled on all display devices.)
[101910.818] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[101910.818] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.818] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[101910.818] (**) NVIDIA(0):     all display devices.)
[101910.834] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[101910.834] (II) NVIDIA(GPU-0):     3D Vision stereo.
[101910.834] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.834] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[101910.834] (**) NVIDIA(0):     has been enabled on all display devices.)
[101910.934] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[101910.934] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.934] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[101910.934] (**) NVIDIA(0):     all display devices.)
[101910.950] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[101910.950] (II) NVIDIA(GPU-0):     3D Vision stereo.
[101910.951] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.951] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[101910.951] (**) NVIDIA(0):     has been enabled on all display devices.)
[101911.285] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[101911.285] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101911.285] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[101911.285] (**) NVIDIA(0):     all display devices.)
[101911.301] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[101911.301] (II) NVIDIA(GPU-0):     3D Vision stereo.
[101911.301] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101911.301] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[101911.301] (**) NVIDIA(0):     has been enabled on all display devices.)
[105780.869] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[105780.869] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105780.869] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[105780.869] (**) NVIDIA(0):     all display devices.)
[105780.887] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[105780.887] (II) NVIDIA(GPU-0):     3D Vision stereo.
[105780.888] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105780.888] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[105780.888] (**) NVIDIA(0):     has been enabled on all display devices.)
[105780.935] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[105780.935] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105780.935] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[105780.935] (**) NVIDIA(0):     all display devices.)
[105780.951] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[105780.951] (II) NVIDIA(GPU-0):     3D Vision stereo.
[105780.951] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105780.951] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[105780.951] (**) NVIDIA(0):     has been enabled on all display devices.)
[105781.003] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[105781.003] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105781.003] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[105781.003] (**) NVIDIA(0):     all display devices.)
[105781.020] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[105781.020] (II) NVIDIA(GPU-0):     3D Vision stereo.
[105781.020] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105781.020] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[105781.020] (**) NVIDIA(0):     has been enabled on all display devices.)
[105781.102] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[105781.102] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105781.102] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[105781.102] (**) NVIDIA(0):     all display devices.)
[105781.118] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[105781.118] (II) NVIDIA(GPU-0):     3D Vision stereo.
[105781.118] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105781.118] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[105781.118] (**) NVIDIA(0):     has been enabled on all display devices.)
[105781.168] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[105781.168] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105781.168] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[105781.168] (**) NVIDIA(0):     all display devices.)
[105781.185] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[105781.185] (II) NVIDIA(GPU-0):     3D Vision stereo.
[105781.185] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105781.185] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[105781.185] (**) NVIDIA(0):     has been enabled on all display devices.)
[105781.219] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[105781.219] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105781.219] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[105781.219] (**) NVIDIA(0):     all display devices.)
[105781.235] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[105781.235] (II) NVIDIA(GPU-0):     3D Vision stereo.
[105781.235] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105781.235] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[105781.235] (**) NVIDIA(0):     has been enabled on all display devices.)
[105781.435] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[105781.435] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105781.435] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[105781.435] (**) NVIDIA(0):     all display devices.)
[105781.452] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[105781.452] (II) NVIDIA(GPU-0):     3D Vision stereo.
[105781.452] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105781.452] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[105781.452] (**) NVIDIA(0):     has been enabled on all display devices.)
[107254.244] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[107254.244] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[107254.244] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[107254.244] (**) NVIDIA(0):     all display devices.)
[107254.260] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[107254.260] (II) NVIDIA(GPU-0):     3D Vision stereo.
[107254.260] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[107254.260] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[107254.260] (**) NVIDIA(0):     has been enabled on all display devices.)

Offline

  • Users
  • Prawie jak Guru
  • ****
  • Wiadomości: 344
    • Zobacz profil
2 monitory - problem z LCD (VGA) na DVI
« Odpowiedź #1 dnia: 2013-09-20, 22:27:10 »
Jakiego sterownika używasz?

Offline

  • Users
  • Nowy na forum
  • *
  • Wiadomości: 3
    • Zobacz profil
2 monitory - problem z LCD (VGA) na DVI
« Odpowiedź #2 dnia: 2013-09-20, 22:39:19 »
NVIDIA zamknięte - poniżej xorg.conf :

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 304.88  (buildd@murphy)  Wed Apr  3 09:32:37 UTC 2013

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 304.48  (buildd@murphy)  Wed Sep 12 11:32:28 UTC 2012

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "CRT-0"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 210"
EndSection

Section "Screen"

# Removed Option "metamodes" "CRT-1: 1280x1024_75 +0+0; CRT-0: 320x240 +0+0; CRT-0: nvidia-auto-select +0+0"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "CRT-1"
    Option         "metamodes" "CRT-0: 640x480 +1280+0, CRT-1: 1280x1024_75 +0+0; CRT-0: 320x240 +0+0; CRT-0: nvidia-auto-select @1280x1024 +1280+0, CRT-1: 1280x1024 +0+0; CRT-0: nvidia-auto-select @640x360 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
// EDIT :

Na razie problem rozwiązany :)


---edit Lord Darius
code!