Linux.pl »

Baza sprzętu »
Rozdajemy Linuksa »
Poczta Linux.pl »
Hosting Linux.pl »

Nowe posty

xx Problem ze sterownikami. (5)
2024-04-13, 21:25:16
xx Instalacja xfce4 (2)
2024-04-13, 16:20:17
xx Serie kompilacji bez instalacji dla “emerge” w Gentoo (2)
2024-04-08, 18:40:04
xx Plasma 6 w Neonie ssie trochę mniej ... (17)
2024-04-05, 10:03:46
xx Problem z Linux Lite po instalacji (3)
2024-04-03, 14:23:40
xx Jak właczyć num locka przy starcie systemu debian 12? (12)
2024-04-02, 17:43:54
xx Brak dźwieku w systemie. (5)
2024-04-02, 16:13:41
xx Dystrybucja pod HP Omen (7)
2024-03-29, 11:33:05
xx [Poradnik] Wyszukiwanie Sterowników (2)
2024-03-27, 21:08:23
xx Ile pingwinów? (1)
2024-03-27, 08:59:24
« poprzedni następny »
Strony: 1 [2] 3   Do dołu

Autor Wątek: Wbudowany czytnik kart SD/MS/Pro/MMC/xD w Hp Pavilion dv6710ea  (Przeczytany 96543 razy)

miro57

  • Gość
Wbudowany czytnik kart SD/MS/Pro/MMC/xD w Hp Pavilion dv6710ea
« Odpowiedź #15 dnia: 2012-06-07, 18:39:37 »
Zanim zaczniesz się zmagać z sterownikami możesz jeszcze spróbować
załadować moduł kernela r852 (w wersji kernela 2.6.39 na pewno jest).
Fragment opisu do niego:
"description: Ricoh 85xx xD/smartmedia card reader driver"

Moduł załaduj przed włożeniem karty poleceniem:
/sbin/modprobe r852

Inna możliwość to uaktualnienie kernela do najnowszej wersji.
Zapisane

silva2007

  • Gość
Wbudowany czytnik kart SD/MS/Pro/MMC/xD w Hp Pavilion dv6710ea
« Odpowiedź #16 dnia: 2012-06-08, 09:42:25 »
Cytat: miro57
Zanim zaczniesz się zmagać z sterownikami możesz jeszcze spróbować
załadować moduł kernela r852 (w wersji kernela 2.6.39 na pewno jest).
Fragment opisu do niego:
"description: Ricoh 85xx xD/smartmedia card reader driver"

Moduł załaduj przed włożeniem karty poleceniem:
/sbin/modprobe r852

Inna możliwość to uaktualnienie kernela do najnowszej wersji.
Zaktualizowałem jajo:
Kod: [Zaznacz]
agnieszka@linux-buba:~/Pulpit> uname -r
3.4.1-117-desktop
Restart systemu.
Następnie wydałem komendę /sbin/modprobe r852:
Kod: [Zaznacz]
linux-buba:/home/agnieszka/Pulpit # /sbin/modprobe r852
WARNING: /etc/modprobe.d/backlist_ricoh_mmc.conf line 1: ignoring bad line starting with 'ricoh_mmc'
FATAL: Could not load /lib/modules/2.6.37.6-0.11-desktop/modules.dep: No such file or directory
Usunąłem jako root plik backlist_ricoh_mmc.conf i wykonałem komendę /sbin/modprobe r852:
Kod: [Zaznacz]
linux-buba:/ # /sbin/modprobe r852
linux-buba:/ #
Po włożeniu karty xD nadal NIC  :(:(:(
Zapisane

miro57

  • Gość
Wbudowany czytnik kart SD/MS/Pro/MMC/xD w Hp Pavilion dv6710ea
« Odpowiedź #17 dnia: 2012-06-08, 13:35:30 »
Po załadowaniu modułu r852 co pokazuje polecenie
/sbin/lsmod | grep r852

Po próbie ładowania modułów sprawdzaj jaki jest tego efekt poleceniami:
dmesg | tail
dmesg | grep xD

Na tej stronie jest coś o problemach z modułami do Ricoh xD i SD przejrzyj uważnie
ja bardzo słabo znam angielski.
http://ubuntuforums.org/archive/index.php/t-1611491.html

Sprawdź przed włożeniem karty dostępne partycje poleceniem:
cat /proc/partitions
i ponownie po włożeniu karty wcelu sprawdzenia czy pojawiły się nowe.

Być może trzeba montować ręcznie.
Zapisane

silva2007

  • Gość
Wbudowany czytnik kart SD/MS/Pro/MMC/xD w Hp Pavilion dv6710ea
« Odpowiedź #18 dnia: 2012-06-08, 15:33:28 »
Cytat: miro57
Po załadowaniu modułu r852 co pokazuje polecenie
/sbin/lsmod | grep r852

Cytat: silva2007
Kod: [Zaznacz]
agnieszka@linux-buba:~/Pulpit> /sbin/lsmod | grep r852
r852                    9381  0 
sm_common               6805  1 r852
nand                   47274  2 r852,sm_common
Po próbie ładowania modułów sprawdzaj jaki jest tego efekt poleceniami:
dmesg | tail

Cytat: silva2007
Kod: [Zaznacz]
agnieszka@linux-buba:~/Pulpit> dmesg | tail
[ 4420.985225] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 4423.020841] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 4424.308342] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 4424.708889] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 4425.058037] wlan0: no IPv6 routers present
[ 4516.257148] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 5927.005709] ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
[ 6245.359100] r852: card removed
[ 6249.374078] r852: detected xD writeable card in slot
[ 6249.675080] NAND device: Manufacturer ID: 0x98, Chip ID: 0xd3 (Toshiba xD 1GiB 3,3V)
dmesg | grep xD
Cytat: silva2007
Kod: [Zaznacz]
agnieszka@linux-buba:~/Pulpit> dmesg | grep 'xD'
[    2.241686] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xD512
[    2.241698] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xD604
[    2.242788] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xD7FE
[    2.242792] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xD863
[    2.262800] [drm] nouveau 0000:05:00.0: 0xD863: Condition still not met after 20ms, skipping following opcodes
[   79.602046] r852: detected xD writeable card in slot
[   79.903088] NAND device: Manufacturer ID: 0x98, Chip ID: 0xd3 (Toshiba xD 1GiB 3,3V)
[  444.301031] r852: detected xD writeable card in slot
[  444.602064] NAND device: Manufacturer ID: 0x98, Chip ID: 0xd3 (Toshiba xD 1GiB 3,3V)
[ 4399.281237] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xD512
[ 4399.281267] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xD604
[ 4399.282359] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xD7FE
[ 4399.282361] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xD863
[ 6249.374078] r852: detected xD writeable card in slot
[ 6249.675080] NAND device: Manufacturer ID: 0x98, Chip ID: 0xd3 (Toshiba xD 1GiB 3,3V)
Sprawdź przed włożeniem karty dostępne partycje poleceniem:
cat /proc/partitions
i ponownie po włożeniu karty wcelu sprawdzenia czy pojawiły się nowe.

Cytat: silva2007
cat /proc/partitions przed włożeniem karty
Kod: [Zaznacz]
agnieszka@linux-buba:~/Pulpit> cat /proc/partitions
major minor  #blocks  name

   8        0  244198584 sda
   8        1   20971520 sda1
   8        2          1 sda2
   8        3  221128704 sda3
   8        5    2087936 sda5
  11        0    1048575 sr0
Cytat: silva2007
cat /proc/partitions po włożeniu karty
Kod: [Zaznacz]
agnieszka@linux-buba:~/Pulpit> cat /proc/partitions
major minor  #blocks  name

   8        0  244198584 sda
   8        1   20971520 sda1
   8        2          1 sda2
   8        3  221128704 sda3
   8        5    2087936 sda5
  11        0    1048575 sr0
Być może trzeba montować ręcznie.
A niech to szlag jasny...... sorry ale brak mi już koncepcji.......
Zapisane

silva2007

  • Gość
Wbudowany czytnik kart SD/MS/Pro/MMC/xD w Hp Pavilion dv6710ea
« Odpowiedź #19 dnia: 2012-06-08, 15:47:55 »
Cytat: silva2007
Cytat: miro57
Po załadowaniu modułu r852 co pokazuje polecenie
/sbin/lsmod | grep r852

Cytat: silva2007
Kod: [Zaznacz]
agnieszka@linux-buba:~/Pulpit> /sbin/lsmod | grep r852
r852                    9381  0 
sm_common               6805  1 r852
nand                   47274  2 r852,sm_common
Po próbie ładowania modułów sprawdzaj jaki jest tego efekt poleceniami:
dmesg | tail

Cytat: silva2007
Kod: [Zaznacz]
agnieszka@linux-buba:~/Pulpit> dmesg | tail
[ 4420.985225] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 4423.020841] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 4424.308342] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 4424.708889] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 4425.058037] wlan0: no IPv6 routers present
[ 4516.257148] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 5927.005709] ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
[ 6245.359100] r852: card removed
[ 6249.374078] r852: detected xD writeable card in slot
[ 6249.675080] NAND device: Manufacturer ID: 0x98, Chip ID: 0xd3 (Toshiba xD 1GiB 3,3V)
dmesg | grep xD
Cytat: silva2007
Kod: [Zaznacz]
agnieszka@linux-buba:~/Pulpit> dmesg | grep 'xD'
[    2.241686] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xD512
[    2.241698] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xD604
[    2.242788] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xD7FE
[    2.242792] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xD863
[    2.262800] [drm] nouveau 0000:05:00.0: 0xD863: Condition still not met after 20ms, skipping following opcodes
[   79.602046] r852: detected xD writeable card in slot
[   79.903088] NAND device: Manufacturer ID: 0x98, Chip ID: 0xd3 (Toshiba xD 1GiB 3,3V)
[  444.301031] r852: detected xD writeable card in slot
[  444.602064] NAND device: Manufacturer ID: 0x98, Chip ID: 0xd3 (Toshiba xD 1GiB 3,3V)
[ 4399.281237] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xD512
[ 4399.281267] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xD604
[ 4399.282359] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xD7FE
[ 4399.282361] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xD863
[ 6249.374078] r852: detected xD writeable card in slot
[ 6249.675080] NAND device: Manufacturer ID: 0x98, Chip ID: 0xd3 (Toshiba xD 1GiB 3,3V)
Sprawdź przed włożeniem karty dostępne partycje poleceniem:
cat /proc/partitions
i ponownie po włożeniu karty wcelu sprawdzenia czy pojawiły się nowe.

Cytat: silva2007
cat /proc/partitions przed włożeniem karty
Kod: [Zaznacz]
agnieszka@linux-buba:~/Pulpit> cat /proc/partitions
major minor  #blocks  name

   8        0  244198584 sda
   8        1   20971520 sda1
   8        2          1 sda2
   8        3  221128704 sda3
   8        5    2087936 sda5
  11        0    1048575 sr0
Cytat: silva2007
cat /proc/partitions po włożeniu karty
Kod: [Zaznacz]
agnieszka@linux-buba:~/Pulpit> cat /proc/partitions
major minor  #blocks  name

   8        0  244198584 sda
   8        1   20971520 sda1
   8        2          1 sda2
   8        3  221128704 sda3
   8        5    2087936 sda5
  11        0    1048575 sr0
Być może trzeba montować ręcznie.
A niech to szlag jasny...... sorry ale brak mi już koncepcji.......
To jeszcze na dokładkę - kompletny wydruk polecenia lspci -vv
Kod: [Zaznacz]
00:00.0 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a3)
	Subsystem: Hewlett-Packard Company Device 30cf
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0
	Capabilities: [44] HyperTransport: Slave or Primary Interface
		Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
		Link Control 0: CFlE- CST- CFE- 		Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
		Link Control 1: CFlE- CST- CFE- 		Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
		Revision ID: 1.03
		Link Frequency 0: 800MHz
		Link Error 0: 		Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
		Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
		Link Frequency 1: 200MHz
		Link Error 1: 		Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
		Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
		Prefetchable memory behind bridge Upper: 00-00
		Bus Number: 00
	Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
		Mapping Address Base: 00000000fee00000

00:01.0 ISA bridge: nVidia Corporation MCP65 LPC Bridge (rev a3)
	Subsystem: Hewlett-Packard Company Device 30cf
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0
	Region 0: I/O ports at 1d00 [size=256]

00:01.1 SMBus: nVidia Corporation MCP65 SMBus (rev a1)
	Subsystem: Hewlett-Packard Company Device 30cf
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at 3080 [size=64]
	Region 4: I/O ports at 3040 [size=64]
	Region 5: I/O ports at 3000 [size=64]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: nForce2_smbus

00:01.3 Co-processor: nVidia Corporation MCP65 SMU (rev a1)
	Subsystem: Hewlett-Packard Company Device 30cf
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 255
	Region 0: Memory at f2200000 (32-bit, non-prefetchable) [size=512K]

00:02.0 USB Controller: nVidia Corporation MCP65 USB Controller (rev a3) (prog-if 10 [OHCI])
	Subsystem: Hewlett-Packard Company Device 30cf
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at f2486000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ohci_hcd

00:02.1 USB Controller: nVidia Corporation MCP65 USB Controller (rev a3) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Device 30cf
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at f2488000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [44] Debug port: BAR=1 offset=0098
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ehci_hcd

00:06.0 Ethernet controller: nVidia Corporation MCP65 Ethernet (rev a3)
	Subsystem: Hewlett-Packard Company Device 30cf
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at f2487000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at 30e0 [size=8]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
	Kernel driver in use: forcedeth

00:07.0 Audio device: nVidia Corporation MCP65 High Definition Audio (rev a1)
	Subsystem: Hewlett-Packard Company Device 30cf
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0 (500ns min, 1250ns max)
	Interrupt: pin B routed to IRQ 21
	Region 0: Memory at f2480000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
		Address: 0000000000000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
	Kernel driver in use: snd_hda_intel

00:08.0 PCI bridge: nVidia Corporation MCP65 PCI bridge (rev a1) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
	Memory behind bridge: f2100000-f21fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
	Capabilities: [b8] Subsystem: nVidia Corporation Device cb84
	Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-
		Mapping Address Base: 00000000fee00000

00:09.0 IDE interface: nVidia Corporation MCP65 IDE (rev a1) (prog-if 8a [Master SecP PriP])
	Subsystem: Hewlett-Packard Company Device 30cf
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0 (750ns min, 250ns max)
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
	Region 4: I/O ports at 30c0 [size=16]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: pata_amd

00:0a.0 IDE interface: nVidia Corporation MCP65 SATA Controller (rev a3) (prog-if 85 [Master SecO PriO])
	Subsystem: Hewlett-Packard Company Device 30cf
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 23
	Region 0: I/O ports at 30f8 [size=8]
	Region 1: I/O ports at 30ec [size=4]
	Region 2: I/O ports at 30f0 [size=8]
	Region 3: I/O ports at 30e8 [size=4]
	Region 4: I/O ports at 30d0 [size=16]
	Region 5: Memory at f2484000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ahci

00:0b.0 PCI bridge: nVidia Corporation Device 045b (rev a1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Subsystem: nVidia Corporation Device 0000
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
		Address: 00000000fee0300c  Data: 4149
	Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
		Mapping Address Base: 00000000fee00000
	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #3, Speed 2.5GT/s, Width x2, ASPM L0s L1, Latency L0 <512ns, L1 <4us
			ClockPM- Surprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
			Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
			Control: AttnInd Off, PwrInd On, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=WRR32
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
			Status:	NegoPending- InProgress-
	Kernel driver in use: pcieport

00:0c.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Memory behind bridge: f2000000-f20fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Subsystem: nVidia Corporation Device 0000
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
		Address: 00000000fee0300c  Data: 4151
	Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
		Mapping Address Base: 00000000fee00000
	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
			ClockPM- Surprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
			Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
			Control: AttnInd Off, PwrInd On, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=WRR32
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
			Status:	NegoPending- InProgress-
	Kernel driver in use: pcieport

00:0d.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: cc000000-ceffffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Subsystem: nVidia Corporation Device 0000
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
		Address: 00000000fee0300c  Data: 4159
	Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
		Mapping Address Base: 00000000fee00000
	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
			ClockPM- Surprise- LLActRep+ BwNot-
		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
			Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
			Control: AttnInd Off, PwrInd On, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=WRR32
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
			Status:	NegoPending- InProgress-
	Kernel driver in use: pcieport

00:0e.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
	I/O behind bridge: 00005000-00005fff
	Memory behind bridge: f0000000-f1ffffff
	Prefetchable memory behind bridge: 00000000f2600000-00000000f27fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Subsystem: nVidia Corporation Device 0000
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
		Address: 00000000fee0300c  Data: 4161
	Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
		Mapping Address Base: 00000000fee00000
	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
			ClockPM- Surprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
			Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
			Control: AttnInd Off, PwrInd On, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=WRR32
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
			Status:	NegoPending- InProgress-
	Kernel driver in use: pcieport

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Capabilities: [80] HyperTransport: Host or Secondary Interface
		Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- 		Link Control: CFlE- CST- CFE- 		Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
		Revision ID: 1.02
		Link Frequency: 800MHz
		Link Error: 		Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
		Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Capabilities: [f0] Secure device 
	Kernel driver in use: k8temp

03:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
	Subsystem: Hewlett-Packard Company Device 137b
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
		Address: 00000000  Data: 0000
	Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
			ClockPM- Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [90] MSI-X: Enable- Count=1 Masked-
		Vector table: BAR=0 offset=00000000
		PBA: BAR=0 offset=00000000
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		AERCap:	First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
	Capabilities: [140 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
			Status:	NegoPending- InProgress-
	Kernel driver in use: ath5k

05:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400M GS] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: Hewlett-Packard Company Device 30cf
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at cc000000 (64-bit, non-prefetchable) [size=32M]
	Region 5: I/O ports at 4000 [size=128]
	Expansion ROM at  [disabled]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [78] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
			ClockPM- Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
			Status:	NegoPending- InProgress-
	Capabilities: [128 v1] Power Budgeting 
	Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 
	Kernel driver in use: nouveau

07:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) (prog-if 10 [OHCI])
	Subsystem: Hewlett-Packard Company Device 30cf
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at f2100000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME+
	Kernel driver in use: firewire_ohci

07:05.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
	Subsystem: Hewlett-Packard Company Device 30cf
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 7
	Region 0: Memory at f2100800 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
	Kernel driver in use: sdhci-pci

07:05.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
	Subsystem: Hewlett-Packard Company Device 30cf
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 10
	Region 0: Memory at f2101000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-

07:05.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
	Subsystem: Hewlett-Packard Company Device 30cf
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 7
	Region 0: Memory at f2101400 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME+
	Kernel driver in use: r852
Jajco widzi, w partycjach cisza..... Nic nie rozumiem...nic nie wiem......Dlaczego SD czyta a xD nie???????
Zapisane

miro57

  • Gość
Wbudowany czytnik kart SD/MS/Pro/MMC/xD w Hp Pavilion dv6710ea
« Odpowiedź #20 dnia: 2012-06-08, 20:59:08 »
Przed włożeniem karty xD załaduj moduły: r852 , ssfdc
http://robert.orzanna.de/2011/10/28/accessing-a-xd-picture-card-on-linux/

Włóż kartę xD i podaj wyniki poleceń:
/sbin/lsmod | grep sd
/sbin/lsmod | grep mm
dmesg | grep sd
dmesg | grep mm
cat /proc/partitions

Jeśli karta używa system plików exfat to mogą być problemy.
Zapisane

silva2007

  • Gość
Wbudowany czytnik kart SD/MS/Pro/MMC/xD w Hp Pavilion dv6710ea
« Odpowiedź #21 dnia: 2012-06-10, 01:54:06 »
Cytat: miro57
Przed włożeniem karty xD załaduj moduły: r852 , ssfdc
http://robert.orzanna.de/2011/10/28/accessing-a-xd-picture-card-on-linux/

Włóż kartę xD i podaj wyniki poleceń:
/sbin/lsmod | grep sd
/sbin/lsmod | grep mm
dmesg | grep sd
dmesg | grep mm
cat /proc/partitions

Jeśli karta używa system plików exfat to mogą być problemy.
/sbin/lsmod | grep sd
Kod: [Zaznacz]
linux-buba:/home/agnieszka/Pulpit # /sbin/lsmod | grep sd
sdhci_pci               9587  0 
sdhci                  27129  1 sdhci_pci
mmc_core               91261  2 sdhci_pci,sdhci
/sbin/lsmod | grep mm
Kod: [Zaznacz]
linux-buba:/home/agnieszka/Pulpit # /sbin/lsmod | grep mm
rfcomm                 53772  8 
bluetooth             252613  24 rfcomm,bnep,btusb
sm_common               6805  1 r852
nand                   47274  2 r852,sm_common
mtd                    35399  4 mtdchar,sm_common,nand
mmc_core               91261  2 sdhci_pci,sdhci
dmesg | grep sd
Kod: [Zaznacz]
linux-buba:/home/agnieszka/Pulpit # dmesg | grep sd
[    0.654412] usbcore: registered new interface driver ums-isd200
[    0.654457] usbcore: registered new interface driver ums-sddr09
[    0.654468] usbcore: registered new interface driver ums-sddr55
[    0.678414] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
[    0.905321] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    0.905437] sd 0:0:0:0: [sda] Write Protect is off
[    0.905441] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.905489] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.948267]  sda: sda1 sda2 < sda5 > sda3
[    0.948763] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.960959] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[    4.080437] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr
[    7.816838] sdhci: Secure Digital Host Controller Interface driver
[    7.816842] sdhci: Copyright(c) Pierre Ossman
[    8.175658] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    8.236527] sdhci-pci 0000:07:05.1: SDHCI controller found [1180:0822] (rev 22)
[    8.237688] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    8.238858] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    8.240011] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    8.242091] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[    8.297445] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    8.299068] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[    8.354837] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    8.357050] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[    8.414962] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    8.417051] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[    8.472609] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    9.875713] Adding 2087932k swap on /dev/sda5.  Priority:-1 extents:1 across:2087932k 
[   11.082650] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   36.823962] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[   37.199122] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 2068.043330] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[ 2068.351660] EXT4-fs (sda3): re-mounted. Opts: commit=600
[ 2192.179757] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[ 2200.923563] EXT4-fs (sda3): re-mounted. Opts: commit=600
[ 2205.751265] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 2208.803224] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 2209.543868] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[ 2212.653799] EXT4-fs (sda3): re-mounted. Opts: commit=600
[ 4358.856156] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 4358.938407] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 4382.625064] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 4382.889037] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 4396.947023] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 4399.554066] sd 0:0:0:0: [sda] Starting disk
[ 4400.220953] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[ 4400.277048] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 4400.279022] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[ 4400.336530] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 4400.338030] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[ 4400.394329] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 4400.396029] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[ 4400.451368] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 4412.344169] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 4412.543150] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 4420.985225] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 4423.020841] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 4424.308342] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 4424.708889] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 8290.723425] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[ 8290.843467] EXT4-fs (sda3): re-mounted. Opts: commit=600
[ 9570.791766] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 9571.649195] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 9572.514015] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[ 9572.611389] EXT4-fs (sda3): re-mounted. Opts: commit=600
[ 9579.981380] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 9580.197568] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 9584.486461] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[ 9584.614059] EXT4-fs (sda3): re-mounted. Opts: commit=600
[ 9585.219625] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 9585.305838] EXT4-fs (sda3): re-mounted. Opts: commit=0
[19081.562954] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[19082.073785] EXT4-fs (sda3): re-mounted. Opts: commit=600
[19082.841190] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[19082.906549] EXT4-fs (sda3): re-mounted. Opts: commit=0
[19085.533858] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[19085.623334] EXT4-fs (sda3): re-mounted. Opts: commit=600
[19085.967207] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[19086.056807] EXT4-fs (sda3): re-mounted. Opts: commit=0
[33725.117235] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[33725.439149] EXT4-fs (sda3): re-mounted. Opts: commit=600
[33725.922532] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[33725.928238] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41231.383676] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41231.593859] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41233.229573] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[41233.229771] sd 0:0:0:0: [sda] Stopping disk
[41233.319733] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[41235.809425] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[41235.810448] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[41238.641066] sd 0:0:0:0: [sda] Starting disk
[41238.921065] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[41238.979071] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[41238.981040] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[41239.045022] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[41239.047032] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[41239.107093] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[41239.109033] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[41239.170020] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[41239.714994] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41240.355887] EXT4-fs (sda3): re-mounted. Opts: commit=0
[54967.566459] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[54967.776084] EXT4-fs (sda3): re-mounted. Opts: commit=600
[54974.066371] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[54974.673341] EXT4-fs (sda3): re-mounted. Opts: commit=0
[54977.783231] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[54978.065747] EXT4-fs (sda3): re-mounted. Opts: commit=0
[54983.477636] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[54983.953500] EXT4-fs (sda3): re-mounted. Opts: commit=600
[54986.496369] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[54986.729690] EXT4-fs (sda3): re-mounted. Opts: commit=0
[56523.043801] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[56523.404480] EXT4-fs (sda3): re-mounted. Opts: commit=600
[56540.908224] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[56541.160065] EXT4-fs (sda3): re-mounted. Opts: commit=600
[56541.975136] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[56542.059498] EXT4-fs (sda3): re-mounted. Opts: commit=600
[56544.759285] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[56544.834931] EXT4-fs (sda3): re-mounted. Opts: commit=0
[58540.817846] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[58540.924549] EXT4-fs (sda3): re-mounted. Opts: commit=600
[58541.472774] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[58541.548809] EXT4-fs (sda3): re-mounted. Opts: commit=600
[58542.757441] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[58542.907960] EXT4-fs (sda3): re-mounted. Opts: commit=0
[58546.015518] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[58546.066903] EXT4-fs (sda3): re-mounted. Opts: commit=0
[58657.038118] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[58657.275191] EXT4-fs (sda3): re-mounted. Opts: commit=600
[58657.816259] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[58657.889464] EXT4-fs (sda3): re-mounted. Opts: commit=0
[93112.247772] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[93112.365934] EXT4-fs (sda3): re-mounted. Opts: commit=0
[93114.138618] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[93114.138819] sd 0:0:0:0: [sda] Stopping disk
[93114.238714] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[93116.738494] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[93116.739505] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[93119.303063] sd 0:0:0:0: [sda] Starting disk
[93119.616498] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[93119.671336] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[93119.673040] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[93119.729563] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[93119.733041] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[93119.788575] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[93119.791045] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[93119.848255] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[93120.727779] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[93120.942692] EXT4-fs (sda3): re-mounted. Opts: commit=0
dmesg | grep mm
Kod: [Zaznacz]
linux-buba:/home/agnieszka/Pulpit # dmesg | grep mm
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   Normal zone: 1732 pages used for memmap
[    0.000000]   HighMem zone: 2331 pages used for memmap
[    0.000000] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD2500BEKT-75PVMT1_WD-WXG1A91D0072-part1 resume=/dev/disk/by-id/ata-WDC_WD2500BEKT-75PVMT1_WD-WXG1A91D0072-part5 splash=silent quiet vga=0x317
[    0.000000] Console: colour dummy device 80x25
[    0.102166] dummy: 
[    0.102450] node 0 link 0: mmio [a0000, bffff]
[    0.102453] node 0 link 0: mmio [80000000, dfffffff]
[    0.102457] node 0 link 0: mmio [e0000000, efffffff]
[    0.102460] node 0 link 0: mmio [f0000000, fe0bffff]
[    0.117272] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[    0.675866] mousedev: PS/2 mouse device common for all mice
[    0.678384] lib80211: common routines for IEEE802.11 drivers
[    2.110719] Console: switching to colour dummy device 80x25
[    8.183377] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    8.237742] 0000:07:05.1 supply vmmc not found, using dummy regulator
[    8.239042] Registered led device: mmc0::
[    8.242060] mmc0: SDHCI controller on PCI [0000:07:05.1] using DMA
[   36.823962] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[   37.199122] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 1534.400087] BUG: Bad rss-counter state mm:f68304c0 idx:1 val:-1
[ 1534.400098] BUG: Bad rss-counter state mm:f68304c0 idx:2 val:1
[ 2068.043330] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[ 2068.351660] EXT4-fs (sda3): re-mounted. Opts: commit=600
[ 2192.179757] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[ 2200.923563] EXT4-fs (sda3): re-mounted. Opts: commit=600
[ 2205.751265] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 2208.803224] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 2209.543868] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[ 2212.653799] EXT4-fs (sda3): re-mounted. Opts: commit=600
[ 4358.856156] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 4358.938407] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 4382.625064] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 4382.889037] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 4412.344169] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 4412.543150] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 4420.985225] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 4423.020841] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 4424.308342] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 4424.708889] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 8290.723425] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[ 8290.843467] EXT4-fs (sda3): re-mounted. Opts: commit=600
[ 9570.791766] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 9571.649195] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 9572.514015] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[ 9572.611389] EXT4-fs (sda3): re-mounted. Opts: commit=600
[ 9579.981380] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 9580.197568] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 9584.486461] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[ 9584.614059] EXT4-fs (sda3): re-mounted. Opts: commit=600
[ 9585.219625] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[ 9585.305838] EXT4-fs (sda3): re-mounted. Opts: commit=0
[19081.562954] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[19082.073785] EXT4-fs (sda3): re-mounted. Opts: commit=600
[19082.841190] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[19082.906549] EXT4-fs (sda3): re-mounted. Opts: commit=0
[19085.533858] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[19085.623334] EXT4-fs (sda3): re-mounted. Opts: commit=600
[19085.967207] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[19086.056807] EXT4-fs (sda3): re-mounted. Opts: commit=0
[33725.117235] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[33725.439149] EXT4-fs (sda3): re-mounted. Opts: commit=600
[33725.922532] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[33725.928238] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41231.383676] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41231.593859] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41239.714994] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41240.355887] EXT4-fs (sda3): re-mounted. Opts: commit=0
[54967.566459] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[54967.776084] EXT4-fs (sda3): re-mounted. Opts: commit=600
[54974.066371] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[54974.673341] EXT4-fs (sda3): re-mounted. Opts: commit=0
[54977.783231] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[54978.065747] EXT4-fs (sda3): re-mounted. Opts: commit=0
[54983.477636] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[54983.953500] EXT4-fs (sda3): re-mounted. Opts: commit=600
[54986.496369] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[54986.729690] EXT4-fs (sda3): re-mounted. Opts: commit=0
[56523.043801] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[56523.404480] EXT4-fs (sda3): re-mounted. Opts: commit=600
[56540.908224] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[56541.160065] EXT4-fs (sda3): re-mounted. Opts: commit=600
[56541.975136] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[56542.059498] EXT4-fs (sda3): re-mounted. Opts: commit=600
[56544.759285] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[56544.834931] EXT4-fs (sda3): re-mounted. Opts: commit=0
[58540.817846] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[58540.924549] EXT4-fs (sda3): re-mounted. Opts: commit=600
[58541.472774] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[58541.548809] EXT4-fs (sda3): re-mounted. Opts: commit=600
[58542.757441] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[58542.907960] EXT4-fs (sda3): re-mounted. Opts: commit=0
[58546.015518] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[58546.066903] EXT4-fs (sda3): re-mounted. Opts: commit=0
[58657.038118] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[58657.275191] EXT4-fs (sda3): re-mounted. Opts: commit=600
[58657.816259] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[58657.889464] EXT4-fs (sda3): re-mounted. Opts: commit=0
[93112.247772] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[93112.365934] EXT4-fs (sda3): re-mounted. Opts: commit=0
[93120.727779] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[93120.942692] EXT4-fs (sda3): re-mounted. Opts: commit=0
cat /proc/partitions
Kod: [Zaznacz]
linux-buba:/home/agnieszka/Pulpit # cat /proc/partitions
major minor  #blocks  name

   8        0  244198584 sda
   8        1   20971520 sda1
   8        2          1 sda2
   8        3  221128704 sda3
   8        5    2087936 sda5
  11        0    4590208 sr0
linux-buba:/home/agnieszka/Pulpit #
Hmmmmm    :|
Zapisane

miro57

  • Gość
Wbudowany czytnik kart SD/MS/Pro/MMC/xD w Hp Pavilion dv6710ea
« Odpowiedź #22 dnia: 2012-06-10, 17:42:28 »
Czy załadowałeś moduł ssfdc ?
/sbin/modprobe ssfdc
Zapisane

silva2007

  • Gość
Wbudowany czytnik kart SD/MS/Pro/MMC/xD w Hp Pavilion dv6710ea
« Odpowiedź #23 dnia: 2012-06-10, 17:55:23 »
Cytat: miro57
Czy załadowałeś moduł ssfdc ?
/sbin/modprobe ssfdc
Kod: [Zaznacz]
linux-buba:/home/agnieszka/Pulpit # /sbin/modbrobe ssfdc
bash: /sbin/modbrobe: Nie ma takiego pliku ani katalogu
To troche dziwne, bo w katalogu:
Kod: [Zaznacz]
linux-buba:/usr/src/linux-3.4.1/drivers/mtd #
mam plik ssfdc.c.
Zapisane

Ksanderon

  • Gość
Wbudowany czytnik kart SD/MS/Pro/MMC/xD w Hp Pavilion dv6710ea
« Odpowiedź #24 dnia: 2012-06-10, 18:18:53 »
literówka # /sbin/modbrobe ssfdc
ma być # /sbin/modprobe ssfdc
Zapisane

silva2007

  • Gość
Wbudowany czytnik kart SD/MS/Pro/MMC/xD w Hp Pavilion dv6710ea
« Odpowiedź #25 dnia: 2012-06-11, 09:38:30 »
Cytat: Ksanderon
literówka # /sbin/modbrobe ssfdc
ma być # /sbin/modprobe ssfdc
Dzięki Ksanderon :) Fakt - literówka.
Pakiet załadowałem, zrestarowałem system i wykonałem jeszcze raz wszystkie komendy. Wyniki zapisywałem do jednego pliku, który listuję poniżej:
Kod: [Zaznacz]
POLECENIE: /sbin/lsmod | grep sd
sdhci_pci               9587  0 
sdhci                  27129  1 sdhci_pci
mmc_core               91261  2 sdhci_pci,sdhci

POLECENIE: /sbin/lsmod | grep mm
rfcomm                 53772  8 
sm_common               6805  1 r852
nand                   47274  2 r852,sm_common
mtd                    35399  7 ssfdc,mtd_blkdevs,mtdchar,sm_common,nand
mmc_core               91261  2 sdhci_pci,sdhci
bluetooth             252613  24 rfcomm,bnep,btusb

POLECENIE: dmesg | grep sd
[    0.655398] usbcore: registered new interface driver ums-isd200
[    0.655444] usbcore: registered new interface driver ums-sddr09
[    0.655455] usbcore: registered new interface driver ums-sddr55
[    0.680454] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
[    0.908229] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    0.908345] sd 0:0:0:0: [sda] Write Protect is off
[    0.908349] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.908396] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.953590]  sda: sda1 sda2 < sda5 > sda3
[    0.954084] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.020266] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[    4.102273] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr
[    7.922775] sdhci: Secure Digital Host Controller Interface driver
[    7.922785] sdhci: Copyright(c) Pierre Ossman
[    7.971349] sdhci-pci 0000:07:05.1: SDHCI controller found [1180:0822] (rev 22)
[    7.972478] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    7.973553] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    7.974009] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    7.976077] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[    8.031535] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    8.033051] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[    8.091502] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    8.093047] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[    8.120643] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    8.149499] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    8.151045] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[    8.206604] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[   12.733657] Adding 2087932k swap on /dev/sda5.  Priority:-1 extents:1 across:2087932k 
[   15.734692] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   30.282052] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[   31.485379] EXT4-fs (sda3): re-mounted. Opts: commit=0
[11642.532808] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[11642.613459] EXT4-fs (sda3): re-mounted. Opts: commit=600
[11654.595619] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[11654.662531] EXT4-fs (sda3): re-mounted. Opts: commit=600
[11661.989900] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[11662.097058] EXT4-fs (sda3): re-mounted. Opts: commit=0
[11676.219774] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[11676.281044] EXT4-fs (sda3): re-mounted. Opts: commit=600
[11676.904658] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[11677.005828] EXT4-fs (sda3): re-mounted. Opts: commit=0
[25238.660958] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[25238.995498] EXT4-fs (sda3): re-mounted. Opts: commit=600
[25239.424814] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[25239.481511] EXT4-fs (sda3): re-mounted. Opts: commit=0
[25244.494144] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[25244.625451] EXT4-fs (sda3): re-mounted. Opts: commit=600
[25244.993527] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[25244.998029] EXT4-fs (sda3): re-mounted. Opts: commit=0
[25326.615385] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[25326.719178] EXT4-fs (sda3): re-mounted. Opts: commit=0
[25328.464363] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[25328.637698] EXT4-fs (sda3): re-mounted. Opts: commit=600
[25337.915630] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[25338.277326] EXT4-fs (sda3): re-mounted. Opts: commit=0
[37851.626105] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[37851.686431] EXT4-fs (sda3): re-mounted. Opts: commit=600
[37856.101088] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[37856.110435] EXT4-fs (sda3): re-mounted. Opts: commit=0
[37861.646502] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[37861.710583] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41798.153094] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[41798.231872] EXT4-fs (sda3): re-mounted. Opts: commit=600
[41799.011253] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41799.018160] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41835.523182] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[41835.790510] EXT4-fs (sda3): re-mounted. Opts: commit=600
[41837.228049] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41837.271465] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41843.460660] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41843.467364] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41848.541535] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[41848.665150] EXT4-fs (sda3): re-mounted. Opts: commit=600
[41870.941689] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41870.999648] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41878.995270] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41879.048316] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41881.560404] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41881.565601] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41884.582745] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[41884.650520] EXT4-fs (sda3): re-mounted. Opts: commit=600
[41885.429037] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41885.438217] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41885.830095] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[41885.834672] EXT4-fs (sda3): re-mounted. Opts: commit=600
[41890.553073] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41890.567755] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41893.300035] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41893.305355] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41924.933482] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41924.940565] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41935.854795] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[41935.991359] EXT4-fs (sda3): re-mounted. Opts: commit=600
[41936.967639] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41936.973374] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41966.550587] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[41966.660460] EXT4-fs (sda3): re-mounted. Opts: commit=600
[41967.123419] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[41967.130736] EXT4-fs (sda3): re-mounted. Opts: commit=600
[41969.434859] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41969.446699] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41970.004126] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[41970.013441] EXT4-fs (sda3): re-mounted. Opts: commit=600
[41970.777809] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41970.783062] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41972.519066] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[41972.524054] EXT4-fs (sda3): re-mounted. Opts: commit=600
[41973.370990] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41973.379002] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41973.753641] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[41973.758690] EXT4-fs (sda3): re-mounted. Opts: commit=600
[41977.337685] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41977.418421] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42108.352409] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[42108.462204] EXT4-fs (sda3): re-mounted. Opts: commit=600
[42108.958150] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42108.962847] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42185.542092] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42185.722259] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42187.092602] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[42187.092792] sd 0:0:0:0: [sda] Stopping disk
[42187.187848] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[42189.669693] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[42189.669703] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[42192.500076] sd 0:0:0:0: [sda] Starting disk
[42192.789544] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[42192.848022] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[42192.850038] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[42192.906559] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[42192.910559] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[42192.973061] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[42192.975029] sdhci-pci 0000:07:05.1: could not set regulator OCR (-22)
[42193.036019] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[42194.546074] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42194.800243] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42197.059990] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[42197.232865] EXT4-fs (sda3): re-mounted. Opts: commit=600
[42221.790423] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42222.286614] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42225.488017] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[42225.573334] EXT4-fs (sda3): re-mounted. Opts: commit=600
[42229.514621] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42229.597378] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42231.462979] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[42231.529221] EXT4-fs (sda3): re-mounted. Opts: commit=600
[42251.936166] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42252.447790] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42294.604406] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[42295.000820] EXT4-fs (sda3): re-mounted. Opts: commit=600
[42411.889627] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42412.226475] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42418.251286] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42418.306919] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42423.946783] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42424.168988] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42627.449469] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42627.533911] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42634.140307] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42634.215946] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42720.794890] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42721.094943] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42723.670821] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[42724.026264] EXT4-fs (sda3): re-mounted. Opts: commit=600
[42725.909119] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42725.964219] EXT4-fs (sda3): re-mounted. Opts: commit=0
[43583.654885] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[43583.787643] EXT4-fs (sda3): re-mounted. Opts: commit=0
[43586.648399] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[43586.717648] EXT4-fs (sda3): re-mounted. Opts: commit=600
[43775.796532] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[43775.939620] EXT4-fs (sda3): re-mounted. Opts: commit=0
[43864.445248] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[43864.526440] EXT4-fs (sda3): re-mounted. Opts: commit=600
[43897.733944] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[43897.800713] EXT4-fs (sda3): re-mounted. Opts: commit=0
[43899.511619] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[43899.582454] EXT4-fs (sda3): re-mounted. Opts: commit=600
[43900.152343] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[43900.157661] EXT4-fs (sda3): re-mounted. Opts: commit=0
[43903.504517] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[43903.584178] EXT4-fs (sda3): re-mounted. Opts: commit=0
[43972.946072] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[43973.134398] EXT4-fs (sda3): re-mounted. Opts: commit=600
[43973.523349] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[43973.606474] EXT4-fs (sda3): re-mounted. Opts: commit=0
[43978.474146] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[43978.548137] EXT4-fs (sda3): re-mounted. Opts: commit=600
[43978.858295] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[43978.862692] EXT4-fs (sda3): re-mounted. Opts: commit=0

POLECENIE: dmesg | grep mm 
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   Normal zone: 1732 pages used for memmap
[    0.000000]   HighMem zone: 2331 pages used for memmap
[    0.000000] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD2500BEKT-75PVMT1_WD-WXG1A91D0072-part1 resume=/dev/disk/by-id/ata-WDC_WD2500BEKT-75PVMT1_WD-WXG1A91D0072-part5 splash=silent quiet vga=0x317
[    0.000000] Console: colour dummy device 80x25
[    0.102165] dummy: 
[    0.102450] node 0 link 0: mmio [a0000, bffff]
[    0.102454] node 0 link 0: mmio [80000000, dfffffff]
[    0.102457] node 0 link 0: mmio [e0000000, efffffff]
[    0.102461] node 0 link 0: mmio [f0000000, fe0bffff]
[    0.117262] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[    0.678000] mousedev: PS/2 mouse device common for all mice
[    0.680426] lib80211: common routines for IEEE802.11 drivers
[    2.166476] Console: switching to colour dummy device 80x25
[    7.972505] 0000:07:05.1 supply vmmc not found, using dummy regulator
[    7.973671] Registered led device: mmc0::
[    7.976052] mmc0: SDHCI controller on PCI [0000:07:05.1] using DMA
[    8.175180] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[   30.282052] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[   31.485379] EXT4-fs (sda3): re-mounted. Opts: commit=0
[11642.532808] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[11642.613459] EXT4-fs (sda3): re-mounted. Opts: commit=600
[11654.595619] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[11654.662531] EXT4-fs (sda3): re-mounted. Opts: commit=600
[11661.989900] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[11662.097058] EXT4-fs (sda3): re-mounted. Opts: commit=0
[11676.219774] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[11676.281044] EXT4-fs (sda3): re-mounted. Opts: commit=600
[11676.904658] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[11677.005828] EXT4-fs (sda3): re-mounted. Opts: commit=0
[25238.660958] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[25238.995498] EXT4-fs (sda3): re-mounted. Opts: commit=600
[25239.424814] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[25239.481511] EXT4-fs (sda3): re-mounted. Opts: commit=0
[25244.494144] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[25244.625451] EXT4-fs (sda3): re-mounted. Opts: commit=600
[25244.993527] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[25244.998029] EXT4-fs (sda3): re-mounted. Opts: commit=0
[25326.615385] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[25326.719178] EXT4-fs (sda3): re-mounted. Opts: commit=0
[25328.464363] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[25328.637698] EXT4-fs (sda3): re-mounted. Opts: commit=600
[25337.915630] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[25338.277326] EXT4-fs (sda3): re-mounted. Opts: commit=0
[37851.626105] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[37851.686431] EXT4-fs (sda3): re-mounted. Opts: commit=600
[37856.101088] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[37856.110435] EXT4-fs (sda3): re-mounted. Opts: commit=0
[37861.646502] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[37861.710583] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41798.153094] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[41798.231872] EXT4-fs (sda3): re-mounted. Opts: commit=600
[41799.011253] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41799.018160] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41835.523182] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[41835.790510] EXT4-fs (sda3): re-mounted. Opts: commit=600
[41837.228049] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41837.271465] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41843.460660] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41843.467364] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41848.541535] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[41848.665150] EXT4-fs (sda3): re-mounted. Opts: commit=600
[41870.941689] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41870.999648] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41878.995270] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41879.048316] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41881.560404] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41881.565601] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41884.582745] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[41884.650520] EXT4-fs (sda3): re-mounted. Opts: commit=600
[41885.429037] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41885.438217] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41885.830095] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[41885.834672] EXT4-fs (sda3): re-mounted. Opts: commit=600
[41890.553073] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41890.567755] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41893.300035] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41893.305355] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41924.933482] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41924.940565] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41935.854795] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[41935.991359] EXT4-fs (sda3): re-mounted. Opts: commit=600
[41936.967639] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41936.973374] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41966.550587] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[41966.660460] EXT4-fs (sda3): re-mounted. Opts: commit=600
[41967.123419] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[41967.130736] EXT4-fs (sda3): re-mounted. Opts: commit=600
[41969.434859] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41969.446699] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41970.004126] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[41970.013441] EXT4-fs (sda3): re-mounted. Opts: commit=600
[41970.777809] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41970.783062] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41972.519066] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[41972.524054] EXT4-fs (sda3): re-mounted. Opts: commit=600
[41973.370990] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41973.379002] EXT4-fs (sda3): re-mounted. Opts: commit=0
[41973.753641] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[41973.758690] EXT4-fs (sda3): re-mounted. Opts: commit=600
[41977.337685] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[41977.418421] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42108.352409] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[42108.462204] EXT4-fs (sda3): re-mounted. Opts: commit=600
[42108.958150] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42108.962847] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42185.542092] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42185.722259] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42194.546074] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42194.800243] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42197.059990] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[42197.232865] EXT4-fs (sda3): re-mounted. Opts: commit=600
[42221.790423] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42222.286614] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42225.488017] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[42225.573334] EXT4-fs (sda3): re-mounted. Opts: commit=600
[42229.514621] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42229.597378] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42231.462979] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[42231.529221] EXT4-fs (sda3): re-mounted. Opts: commit=600
[42251.936166] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42252.447790] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42294.604406] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[42295.000820] EXT4-fs (sda3): re-mounted. Opts: commit=600
[42411.889627] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42412.226475] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42418.251286] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42418.306919] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42423.946783] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42424.168988] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42627.449469] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42627.533911] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42634.140307] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42634.215946] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42720.794890] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42721.094943] EXT4-fs (sda3): re-mounted. Opts: commit=0
[42723.670821] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[42724.026264] EXT4-fs (sda3): re-mounted. Opts: commit=600
[42725.909119] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[42725.964219] EXT4-fs (sda3): re-mounted. Opts: commit=0
[43583.654885] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[43583.787643] EXT4-fs (sda3): re-mounted. Opts: commit=0
[43586.648399] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[43586.717648] EXT4-fs (sda3): re-mounted. Opts: commit=600
[43775.796532] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[43775.939620] EXT4-fs (sda3): re-mounted. Opts: commit=0
[43864.445248] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[43864.526440] EXT4-fs (sda3): re-mounted. Opts: commit=600
[43897.733944] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[43897.800713] EXT4-fs (sda3): re-mounted. Opts: commit=0
[43899.511619] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[43899.582454] EXT4-fs (sda3): re-mounted. Opts: commit=600
[43900.152343] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[43900.157661] EXT4-fs (sda3): re-mounted. Opts: commit=0
[43903.504517] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[43903.584178] EXT4-fs (sda3): re-mounted. Opts: commit=0
[43972.946072] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[43973.134398] EXT4-fs (sda3): re-mounted. Opts: commit=600
[43973.523349] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[43973.606474] EXT4-fs (sda3): re-mounted. Opts: commit=0
[43978.474146] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=600
[43978.548137] EXT4-fs (sda3): re-mounted. Opts: commit=600
[43978.858295] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[43978.862692] EXT4-fs (sda3): re-mounted. Opts: commit=0
[43993.101398] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
[43993.193067] EXT4-fs (sda3): re-mounted. Opts: commit=0

POLECENIE: cat /proc/partitions
major minor  #blocks  name

   8        0  244198584 sda
   8        1   20971520 sda1
   8        2          1 sda2
   8        3  221128704 sda3
   8        5    2087936 sda5
  11        0    4590208 sr0
Niestety nadal nic nie wykrywa.... Lampka kontrolna umieszczona obok gniazda karty na ułamek sekundy tylko się zapala a później gaśnie i ...nic sie nie dzieje. Może po prostu ten typ kart nie jest obsługiwany przez Linux a ja Was kolegów/koleżanki tutaj męczę całkiem niepotrzebnie?????? Już sam nie wiem..... Jestem wszystkim dogłębnie wdzięczny za okazaną mi pomoc. DZIĘKUJĘ!!!!
Zapisane

miro57

  • Gość
Wbudowany czytnik kart SD/MS/Pro/MMC/xD w Hp Pavilion dv6710ea
« Odpowiedź #26 dnia: 2012-06-11, 10:29:41 »
Tu znalazłem jeszcze coś na temat Ricoh xD Card.
https://bugs.archlinux.org/task/25889
http://www.linux-mtd.infradead.org/doc/nand.html

Wykonaj kolejno takie operacje:

Przy wyjętej karcie xD i SD
/sbin/modprobe ssfdc
/sbin/modprobe nftl
/sbin/modprobe ubifs
/sbin/modprobe jffs2
/sbin/modprobe mtdchar
/sbin/modprobe mtdblock
/sbin/modprobe nandsim
/sbin/modprobe r852

Włóż kartę xD

Sprawdź poleceniem ls /dev/mt*
czy masz urządzenie typu mtd* na przykład mtd0
dodatkowo sprawdź wynik polecenia dmesg | tail
w poszukiwaniu z jakim urządzeniem powiązana jest karta xD
mtd , sd , mmc.

Jeśli jest /dev/mtd* to wykonaj /sbin/fdisk -l /dev/mtd0

Wcześniej widziałem w podanych przez ciebie wynikach taki fragment:
Cytat: silva2007
[ 6249.374078] r852: detected xD writeable card in slot
[ 6249.675080] NAND device: Manufacturer ID: 0x98, Chip ID: 0xd3 (Toshiba xD 1GiB 3,3V)
A to jest fragment pliku sm_common.c źródeł kernela gdzie jest lista obsługiwanych
kart xD
Kod: [Zaznacz]
#define XD_TYPEM       (NAND_NO_AUTOINCR | NAND_BROKEN_XD)
static struct nand_flash_dev nand_xd_flash_ids[] = {
	{"xD 16MiB 3,3V",    0x73, 512, 16, 0x4000, 0},
	{"xD 512MiB 3,3V",   0xdc, 512, 512, 0x4000, XD_TYPEM},
	{"xD 1GiB 3,3V",     0xd3, 512, 1024, 0x4000, XD_TYPEM},
	{"xD 2GiB 3,3V",     0xd5, 512, 2048, 0x4000, XD_TYPEM},
Chip ID 0xd3 , 1GiB 3,3V - jest na liście
Może warto jeszcze gdzieś szukać i próbować.
Zapisane

silva2007

  • Gość
Wbudowany czytnik kart SD/MS/Pro/MMC/xD w Hp Pavilion dv6710ea
« Odpowiedź #27 dnia: 2012-06-11, 19:47:04 »
Cytat: miro57
Tu znalazłem jeszcze coś na temat Ricoh xD Card.
https://bugs.archlinux.org/task/25889
http://www.linux-mtd.infradead.org/doc/nand.html

Wykonaj kolejno takie operacje:

Przy wyjętej karcie xD i SD
/sbin/modprobe ssfdc
/sbin/modprobe nftl
/sbin/modprobe ubifs
/sbin/modprobe jffs2
/sbin/modprobe mtdchar
/sbin/modprobe mtdblock
/sbin/modprobe nandsim
/sbin/modprobe r852

Włóż kartę xD

Sprawdź poleceniem ls /dev/mt*
czy masz urządzenie typu mtd* na przykład mtd0
dodatkowo sprawdź wynik polecenia dmesg | tail
w poszukiwaniu z jakim urządzeniem powiązana jest karta xD
mtd , sd , mmc.

Jeśli jest /dev/mtd* to wykonaj /sbin/fdisk -l /dev/mtd0

Wcześniej widziałem w podanych przez ciebie wynikach taki fragment:
Cytat: silva2007
[ 6249.374078] r852: detected xD writeable card in slot
[ 6249.675080] NAND device: Manufacturer ID: 0x98, Chip ID: 0xd3 (Toshiba xD 1GiB 3,3V)
A to jest fragment pliku sm_common.c źródeł kernela gdzie jest lista obsługiwanych
kart xD
Kod: [Zaznacz]
#define XD_TYPEM       (NAND_NO_AUTOINCR | NAND_BROKEN_XD)
static struct nand_flash_dev nand_xd_flash_ids[] = {
	{"xD 16MiB 3,3V",    0x73, 512, 16, 0x4000, 0},
	{"xD 512MiB 3,3V",   0xdc, 512, 512, 0x4000, XD_TYPEM},
	{"xD 1GiB 3,3V",     0xd3, 512, 1024, 0x4000, XD_TYPEM},
	{"xD 2GiB 3,3V",     0xd5, 512, 2048, 0x4000, XD_TYPEM},
Chip ID 0xd3 , 1GiB 3,3V - jest na liście
Może warto jeszcze gdzieś szukać i próbować.
miro57: dzięki za pomoc. Wykonałem polecenia w/w przez Ciebie i oto c otrzymałem:
Kod: [Zaznacz]
linux-buba:/home/agnieszka # /sbin/modprobe ssfdc
linux-buba:/home/agnieszka # /sbin/modprobe nftl
linux-buba:/home/agnieszka # /sbin/modprobe ubifs
linux-buba:/home/agnieszka # /sbin/modprobe jffs2
linux-buba:/home/agnieszka # /sbin/modprobe mtdchar
linux-buba:/home/agnieszka # /sbin/modprobe mtdblock
linux-buba:/home/agnieszka # /sbin/modprobe nandsim
linux-buba:/home/agnieszka # /sbin/modprobe r852

linux-buba:/home/agnieszka # ls /dev/mt*
/dev/mtd0  /dev/mtd0ro  /dev/mtd1  /dev/mtd1ro  /dev/mtdblock0  /dev/mtdblock1  ## jak widać jest urządzenie /dev/mtd0 ##

linux-buba:/home/agnieszka # dmesg | tail
[32637.765670] bits in OOB size: 4
[32637.765686] flash size with OOB: 8448 KiB
[32637.765702] page address bytes: 3
[32637.765718] sector address bytes: 2
[32637.765733] options: 0x62
[32637.765927] Scanning device for bad blocks
[32637.782240] Creating 1 MTD partitions on "NAND 8MiB 1,8V 8-bit":
[32637.782261] 0x000000000000-0x000000800000 : "NAND simulator partition 0"
[32658.759060] r852: detected xD writeable card in slot
[32659.060108] NAND device: Manufacturer ID: 0x98, Chip ID: 0xd3 (Toshiba xD 1GiB 3,3V)

linux-buba:/home/agnieszka # /sbin/fdisk -l /dev/mtd0
last_lba(): I don't know how to handle files with mode 20600

Dysk /dev/mtd0: 0 MB, bajtów: 0
głowic: 255, sektorów/ścieżkę: 63, cylindrów: 0, w sumie sektorów: 0
Jednostka = sektorów, czyli 1 * 512 = 512 bajtów
Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512
Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512
Identyfikator dysku: 0xffffffff

Dysk /dev/mtd0 nie zawiera poprawnej tablicy partycji  

## wydaje mi się, że to bardzo ważna informacja. Może fakt, iż karta była wyjęta z aparatu i włożona pod windowsowy card reader może mieć wpływ na to, że nie jest poprawnie odczytywana. No ale z drugiej strony karta SD też była pod Windowsem używana i bez problemu odczytuje się pod Linux. ##

linux-buba:/home/agnieszka #
Zapisane

miro57

  • Gość
Wbudowany czytnik kart SD/MS/Pro/MMC/xD w Hp Pavilion dv6710ea
« Odpowiedź #28 dnia: 2012-06-12, 00:35:21 »
Powtórz ponownie operacje tak jak było to w poprzednim poscie #27.
Następnie spróbuj zamontować kartę xD jako root.
W tym celu utwórz katalog w /mnt na przykład o nazwie tmp poleceniem:
mkdir /mnt/tmp

Zmiana praw dostępu do katalogu /mnt/tmp - do odczytu dla wszystkich:
chmod a+rx /mnt/tmp
- - - -

Następnie zamontuj kartę xD poleceniem:
mount -t auto /dev/mtd0 /mnt/tmp

Jeśli nie uda się montowanie z /dev/mtd0 to spróbuj samo montowanie powtórzyć
kolejno z: /dev/mtd1 , /dev/mtd0ro , /dev/mtd1ro , /dev/mtdblock0 , /dev/mtdblock1
do pozytywnego skutku.

Po udanym zamontowaniu sprawdź co zawiera katalog /mnt/tmp
Zapisane

silva2007

  • Gość
Wbudowany czytnik kart SD/MS/Pro/MMC/xD w Hp Pavilion dv6710ea
« Odpowiedź #29 dnia: 2012-06-13, 09:05:30 »
Cytat: miro57
Powtórz ponownie operacje tak jak było to w poprzednim poscie #27.
Następnie spróbuj zamontować kartę xD jako root.
W tym celu utwórz katalog w /mnt na przykład o nazwie tmp poleceniem:
mkdir /mnt/tmp

Zmiana praw dostępu do katalogu /mnt/tmp - do odczytu dla wszystkich:
chmod a+rx /mnt/tmp
- - - -

Następnie zamontuj kartę xD poleceniem:
mount -t auto /dev/mtd0 /mnt/tmp

Jeśli nie uda się montowanie z /dev/mtd0 to spróbuj samo montowanie powtórzyć
kolejno z: /dev/mtd1 , /dev/mtd0ro , /dev/mtd1ro , /dev/mtdblock0 , /dev/mtdblock1
do pozytywnego skutku.

Po udanym zamontowaniu sprawdź co zawiera katalog /mnt/tmp
Zrobiłem j/w.:
Kod: [Zaznacz]
linux-buba:/home/agnieszka/Pulpit # ./nowy
Polecenie ls /dev/mt*
/dev/mtd0  /dev/mtd0ro	/dev/mtd1  /dev/mtd1ro	/dev/mtdblock0	/dev/mtdblock1
Polecenie dmesg | tail
[45935.763670] bits in sector size: 13
[45935.763685] bits in page size: 9
[45935.763701] bits in OOB size: 4
[45935.763716] flash size with OOB: 8448 KiB
[45935.763732] page address bytes: 3
[45935.763748] sector address bytes: 2
[45935.763764] options: 0x62
[45935.763984] Scanning device for bad blocks
[45935.797991] Creating 1 MTD partitions on "NAND 8MiB 1,8V 8-bit":
[45935.798047] 0x000000000000-0x000000800000 : "NAND simulator partition 0"
linux-buba:/home/agnieszka/Pulpit # mkdir /mnt/xD
linux-buba:/home/agnieszka/Pulpit # chmod a+rx /mnt/xD
linux-buba:/home/agnieszka/Pulpit # mount -t auto /dev/mtd0 /mnt/xD
mount: /dev/mtd0 nie jest urządzeniem blokowym
linux-buba:/home/agnieszka/Pulpit # mount -t auto /dev/mtd0ro /mnt/xD
mount: /dev/mtd0ro nie jest urządzeniem blokowym
linux-buba:/home/agnieszka/Pulpit # mount -t auto /dev/mtd1ro /mnt/xD
mount: /dev/mtd1ro nie jest urządzeniem blokowym
linux-buba:/home/agnieszka/Pulpit # mount -t auto /dev/mtd1 /mnt/xD
mount: /dev/mtd1 nie jest urządzeniem blokowym
linux-buba:/home/agnieszka/Pulpit # mount -t auto /dev/mtdblock0 /mnt/xD
mount: trzeba określić system plików   <-NO I CHYBA TU JEST PIES POGRZEBANY
linux-buba:/home/agnieszka/Pulpit # mount -t auto /dev/mtdblock1 /mnt/xD
mount: trzeba określić system plików   <- PODOBNIE JAK I TU...
katalog xD jest pusty.
Kod: [Zaznacz]
linux-buba:/mnt/xD # ls
linux-buba:/mnt/xD #
Nie wiem, czy istnieje narzędzie w windows, które umożliwiłoby sformatowanie karty w systemie plików Linux. Może wtedy cośby ruszyło??????


Poczytałem co nie co i zrobiłem to:
Kod: [Zaznacz]
linux-buba:/mnt/xD # mkfs -t vfat -F 12 /dev/mtdblock0
mkfs.vfat 3.0.10 (12 Sep 2010)
unable to get drive geometry, using default 255/63
mkfs.vfat: Attempting to create a too large file system
linux-buba:/mnt/xD # mkfs -t vfat -F 12 /dev/mtdblock1
mkfs.vfat 3.0.10 (12 Sep 2010)
unable to get drive geometry, using default 255/63

linux-buba:/mnt/xD # cat /proc/partitions
major minor  #blocks  name

   8        0  244198584 sda
   8        1   20971520 sda1
   8        2          1 sda2
   8        3  221128704 sda3
   8        5    2087936 sda5
  11        0    4590208 sr0
  31        1       8192 mtdblock1
  31        0    1048576 mtdblock0
linux-buba:/mnt/xD # 

linux-buba:/mnt/xD # mount -t auto /dev/mtdblock1 /mnt/xD
linux-buba:/mnt/xD # mount -t auto /dev/mtdblock0 /mnt/xD
mount: trzeba określić system plików
Tylko nic mi na pulpicie nie wyskakuje, ani w explorerze,że coś się zamountowało.
Zapisane
Strony: 1 [2] 3   Do góry
« poprzedni następny »