EasyCap.ko jak go uzywać?

[gallonin]

Witam,

    Jak sprawdzić do jakich plików w katalogu /dev odnosi się moduł easycap.ko?

Polecenie dmesg wyświetla:

Kod: [Zaznacz]

[   17.356098] Linux media interface: v0.10
[   17.416128] Linux video capture interface: v2.00
[   17.470196] easycap: module is from the staging directory, the quality is unknown, you have been warned.
[   17.470196] Easycap version: 0.9.01
[   17.470196] usbcore: registered new interface driver easycap
[   17.516183] loop: module loaded
[   23.160307] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   33.280109] eth0: no IPv6 routers present
[  797.150008] hrtimer: interrupt took 14854681 ns
[ 1510.936077] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1511.596168] usb 1-1: New USB device found, idVendor=05e1, idProduct=0408
[ 1511.596168] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1511.596168] usb 1-1: Product: USB 2.0 Video Capture Controller
[ 1511.596168] usb 1-1: Manufacturer: Syntek Semiconductor
[ 1515.476475] easycap::0adjust_standard: selected standard: PAL_BGHIN
[ 1515.700582] easycap::0adjust_format: sought:    640x480,UYVY(0x59565955),1=field,0x00=std mask
[ 1515.700582] easycap::0adjust_format: sought:    V4L2_FIELD_NONE
[ 1515.700582] easycap::0adjust_format: actioning: 640x480 PAL_BGHIN_AT_640x480_FMT_UYVY-n
[ 1515.732797] easycap::0adjust_brightness: adjusting brightness to  0x7F
[ 1515.746436] easycap::0adjust_contrast: adjusting contrast to  0x3F
[ 1515.756814] easycap::0adjust_saturation: adjusting saturation to  0x2F
[ 1515.768033] easycap::0adjust_hue: adjusting hue to  0x00
[ 1515.788847] easycap::0easycap_usb_probe: registered with videodev: 0=minor
[ 1515.788847] easycap::0easycap_usb_probe: ends successfully for interface 0
[ 1515.791858] easycap::0easycap_usb_probe: ends successfully for interface 1
[ 1515.795858] easycap::0easycap_usb_probe: audio hardware is microphone
[ 1515.795858] easycap::0easycap_alsa_probe: registered EasyALSA0
[ 1515.795858] easycap::0easycap_usb_probe: ends successfully for interface 2
[ 1516.676103] easycap:: easycap_open: ==========OPEN=========
[ 1517.596090] usbcore: registered new interface driver snd-usb-audio
[ 1519.657797] easycap::0adjust_standard: selected standard: PAL_BGHIN
[ 1519.804105] easycap::0adjust_format: sought:    640x480,UYVY(0x59565955),1=field,0x00=std mask
[ 1519.804105] easycap::0adjust_format: sought:    V4L2_FIELD_NONE
[ 1519.804105] easycap::0adjust_format: actioning: 640x480 PAL_BGHIN_AT_640x480_FMT_UYVY-n
[ 1519.832535] easycap::0adjust_brightness: adjusting brightness to  0x7F
[ 1519.846231] easycap::0adjust_contrast: adjusting contrast to  0x3F
[ 1519.856151] easycap::0adjust_saturation: adjusting saturation to  0x2F
[ 1519.868903] easycap::0adjust_hue: adjusting hue to  0x00
root@debian:~#

Nie rozumiem tego, ale chyba jest dobrze...   Tylko co z tego można wywnioskować?

[gallonin]

Hmm..  to sobie odpowiem,

/dev/video0  i channel/inputs/itp od 1 do 4.