Nowe posty

Autor Wątek: Nie działa touchpad, w bezpiecznym trybie graf. działa  (Przeczytany 3871 razy)

placebo89

  • Gość
Nie rozwiązał się mój problem z Ubuntu, kiedy już zdążył pojawić się nowy -.-' Sytuacja wygląda tak: kiedy już uruchomię system, nie działa mi touchpad (część przesuwania jak i przyciski). Oczywiście konieczny jest restart, uruchamiam w bezpiecznym trybie graficznym, tu wszystko pięknie działa, właśnie z niego piszę, touchpad działa tu bez zarzutu, działa też i na Viście.

Komuś, kto chciałby pomóc, podaję temat z forum Ubuntu - tam pomagał mi kolega, ale nie daliśmy rady. Może ktoś po przeczytaniu topicu wpadnie na jakiś pomysł?

Temat na forum ubuntu: http://ubuntu.pl/forum/viewtopic.php?f=145&t=150593&p=865405#p865405

placebo89

  • Gość
Nie działa touchpad, w bezpiecznym trybie graf. działa
« Odpowiedź #1 dnia: 2011-09-19, 21:35:23 »
Ok, to może ja streszczę co nieco.

wynik polecenia cat /proc/bus/input/devices:

I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
U: Uniq=
H: Handlers=event0
B: EV=21
B: SW=1

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
U: Uniq=
H: Handlers=kbd event2
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input3
U: Uniq=
H: Handlers=sysrq kbd event3
B: EV=120013
B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7

I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4
U: Uniq=
H: Handlers=kbd event4
B: EV=3
B: KEY=3e000b 0 0 0 0 0 0 0

I: Bus=0003 Vendor=04f2 Product=b018 Version=0478
N: Name="USB 2.0 Camera"
P: Phys=usb-0000:00:1a.7-2/button
S: Sysfs=/devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input5
U: Uniq=
H: Handlers=kbd event5
B: EV=3
B: KEY=100000 0 0 0 0 0 0

I: Bus=0011 Vendor=0002 Product=000e Version=0000
N: Name="ETPS/2 Elantech Touchpad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input6
U: Uniq=
H: Handlers=mouse0 event6
B: EV=b
B: KEY=6420 0 30000 0 0 0 0 0 0 0 0
B: ABS=3
Ponadto podaję to, o co proszono na forum ludzi z podobnymi do mojego problemami.

lspci:

00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation G84 [GeForce 8600M GT] (rev a1)
04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
0a:00.0 Memory controller: Intel Corporation Turbo Memory Controller (rev 01)
0c:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
0e:06.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
0e:06.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
0e:06.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
xinput list:

⎡ Virtual core pointer                        id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                  id=4    [slave  pointer  (2)]
⎜   ↳ Logitech USB Receiver                       id=10    [slave  pointer  (2)]
⎜   ↳ Logitech USB Receiver                       id=11    [slave  pointer  (2)]
⎜   ↳ ETPS/2 Elantech Touchpad                    id=13    [slave  pointer  (2)]
⎣ Virtual core keyboard                       id=3    [master keyboard (2)]
    ↳ Virtual core XTEST keyboard                 id=5    [slave  keyboard (3)]
    ↳ Power Button                                id=6    [slave  keyboard (3)]
    ↳ Video Bus                                   id=7    [slave  keyboard (3)]
    ↳ Power Button                                id=8    [slave  keyboard (3)]
    ↳ USB 2.0 Camera                              id=9    [slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard                id=12    [slave  keyboard (3)]
/var/log/Xorg.0.log:

[    26.248] 
X.Org X Server 1.9.0
Release Date: 2010-08-20
[    26.248] X Protocol Version 11, Revision 0
[    26.248] Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
[    26.248] Current Operating System: Linux kasiula 2.6.35-30-generic-pae #56-Ubuntu SMP Mon Jul 11 21:51:12 UTC 2011 i686
[    26.248] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-30-generic-pae root=UUID=24dd2770-fc11-482e-81e5-2b2815e2fdf8 ro quiet splash
[    26.248] Build Date: 16 September 2010  05:39:22PM
[    26.248] xorg-server 2:1.9.0-0ubuntu7 (For technical support please see http://www.ubuntu.com/support)
[    26.248] Current version of pixman: 0.18.4
[    26.248]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    26.248] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    26.248] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 14 20:14:02 2011
[    26.248] (==) Using config file: "/etc/X11/xorg.conf"
[    26.248] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    26.248] (==) No Layout section.  Using the first Screen section.
[    26.248] (**) |-->Screen "Default Screen" (0)
[    26.248] (**) |   |-->Monitor ""
[    26.248] (==) No device specified for screen "Default Screen".
    Using the first device section listed.
[    26.248] (**) |   |-->Device "Default Device"
[    26.248] (==) No monitor specified for screen "Default Screen".
    Using a default monitor configuration.
[    26.248] (==) Automatically adding devices
[    26.248] (==) Automatically enabling devices
[    26.249] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    26.249]     Entry deleted from font path.
[    26.249] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
[    26.249] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    26.249] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    26.249] (II) Loader magic: 0x81f8e00
[    26.249] (II) Module ABI versions:
[    26.249]     X.Org ANSI C Emulation: 0.4
[    26.249]     X.Org Video Driver: 8.0
[    26.249]     X.Org XInput driver : 11.0
[    26.249]     X.Org Server Extension : 4.0
[    26.250] (--) PCI:*(0:1:0:0) 10de:0407:14c0:0025 rev 161, Mem @ 0xc6000000/16777216, 0xd0000000/268435456, 0xc4000000/33554432, I/O @ 0x00002000/128
[    26.250] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    26.250] (II) "extmod" will be loaded by default.
[    26.250] (II) "dbe" will be loaded by default.
[    26.250] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    26.250] (II) "record" will be loaded by default.
[    26.250] (II) "dri" will be loaded by default.
[    26.250] (II) "dri2" will be loaded by default.
[    26.250] (II) LoadModule: "glx"
[    26.251] (II) Loading /usr/lib/xorg/extra-modules/libglx.so
[    26.283] (II) Module glx: vendor="NVIDIA Corporation"
[    26.283]     compiled for 4.0.2, module version = 1.0.0
[    26.283]     Module class: X.Org Server Extension
[    26.283] (II) NVIDIA GLX Module  260.19.06  Mon Sep 13 07:01:31 PDT 2010
[    26.283] (II) Loading extension GLX
[    26.283] (II) LoadModule: "extmod"
[    26.340] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    26.340] (II) Module extmod: vendor="X.Org Foundation"
[    26.340]     compiled for 1.9.0, module version = 1.0.0
[    26.340]     Module class: X.Org Server Extension
[    26.340]     ABI class: X.Org Server Extension, version 4.0
[    26.340] (II) Loading extension MIT-SCREEN-SAVER
[    26.340] (II) Loading extension XFree86-VidModeExtension
[    26.340] (II) Loading extension XFree86-DGA
[    26.340] (II) Loading extension DPMS
[    26.340] (II) Loading extension XVideo
[    26.340] (II) Loading extension XVideo-MotionCompensation
[    26.340] (II) Loading extension X-Resource
[    26.340] (II) LoadModule: "dbe"
[    26.341] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    26.341] (II) Module dbe: vendor="X.Org Foundation"
[    26.341]     compiled for 1.9.0, module version = 1.0.0
[    26.341]     Module class: X.Org Server Extension
[    26.341]     ABI class: X.Org Server Extension, version 4.0
[    26.341] (II) Loading extension DOUBLE-BUFFER
[    26.341] (II) LoadModule: "record"
[    26.341] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    26.341] (II) Module record: vendor="X.Org Foundation"
[    26.341]     compiled for 1.9.0, module version = 1.13.0
[    26.341]     Module class: X.Org Server Extension
[    26.341]     ABI class: X.Org Server Extension, version 4.0
[    26.341] (II) Loading extension RECORD
[    26.341] (II) LoadModule: "dri"
[    26.341] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    26.342] (II) Module dri: vendor="X.Org Foundation"
[    26.342]     compiled for 1.9.0, module version = 1.0.0
[    26.342]     ABI class: X.Org Server Extension, version 4.0
[    26.342] (II) Loading extension XFree86-DRI
[    26.342] (II) LoadModule: "dri2"
[    26.342] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    26.342] (II) Module dri2: vendor="X.Org Foundation"
[    26.342]     compiled for 1.9.0, module version = 1.2.0
[    26.342]     ABI class: X.Org Server Extension, version 4.0
[    26.342] (II) Loading extension DRI2
[    26.342] (II) LoadModule: "nvidia"
[    26.342] (II) Loading /usr/lib/xorg/extra-modules/nvidia_drv.so
[    26.342] (II) Module nvidia: vendor="NVIDIA Corporation"
[    26.342]     compiled for 4.0.2, module version = 1.0.0
[    26.342]     Module class: X.Org Video Driver
[    26.343] (II) NVIDIA dlloader X Driver  260.19.06  Mon Sep 13 06:37:13 PDT 2010
[    26.343] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    26.343] (++) using VT number 7

[    26.344] (II) Loading sub module "fb"
[    26.344] (II) LoadModule: "fb"
[    26.344] (II) Loading /usr/lib/xorg/modules/libfb.so
[    26.345] (II) Module fb: vendor="X.Org Foundation"
[    26.345]     compiled for 1.9.0, module version = 1.0.0
[    26.345]     ABI class: X.Org ANSI C Emulation, version 0.4
[    26.345] (II) Loading sub module "wfb"
[    26.345] (II) LoadModule: "wfb"
[    26.345] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    26.345] (II) Module wfb: vendor="X.Org Foundation"
[    26.345]     compiled for 1.9.0, module version = 1.0.0
[    26.345]     ABI class: X.Org ANSI C Emulation, version 0.4
[    26.345] (II) Loading sub module "ramdac"
[    26.345] (II) LoadModule: "ramdac"
[    26.345] (II) Module "ramdac" already built-in
[    26.345] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen" for depth/fbbpp 24/32
[    26.345] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    26.345] (==) NVIDIA(0): RGB weight 888
[    26.345] (==) NVIDIA(0): Default visual is TrueColor
[    26.345] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    26.345] (**) NVIDIA(0): Option "NoLogo" "True"
[    26.345] (**) NVIDIA(0): Enabling RENDER acceleration
[    26.345] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[    26.345] (II) NVIDIA(0):     enabled.
[    27.462] (II) NVIDIA(0): NVIDIA GPU GeForce 8600M GT (G84) at PCI:1:0:0 (GPU-0)
[    27.462] (--) NVIDIA(0): Memory: 524288 kBytes
[    27.462] (--) NVIDIA(0): VideoBIOS: 60.84.42.00.23
[    27.462] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    27.462] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    27.462] (--) NVIDIA(0): Connected display device(s) on GeForce 8600M GT at PCI:1:0:0
[    27.462] (--) NVIDIA(0):     cPATH (DFP-0)
[    27.462] (--) NVIDIA(0): cPATH (DFP-0): 330.0 MHz maximum pixel clock
[    27.462] (--) NVIDIA(0): cPATH (DFP-0): Internal Dual Link LVDS
[    27.505] (II) NVIDIA(0): Assigned Display Device: DFP-0
[    27.505] (==) NVIDIA(0):
[    27.505] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    27.505] (==) NVIDIA(0):     will be used as the requested mode.
[    27.505] (==) NVIDIA(0):
[    27.505] (II) NVIDIA(0): Validated modes:
[    27.505] (II) NVIDIA(0):     "nvidia-auto-select"
[    27.506] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
[    28.530] (--) NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config
[    28.530] (--) NVIDIA(0):     option
[    28.530] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[    28.530] (--) Depth 24 pixmap format is 32 bpp
[    28.530] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    28.532] (II) NVIDIA(0): Initialized GPU GART.
[    28.539] (II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
[    28.539] (II) NVIDIA(0):     enough to receive ACPI hotkey events.
[    28.539] (II) NVIDIA(0): ACPI brightness change hotkey events enabled.
[    28.546] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[    28.822] (II) Loading extension NV-GLX
[    28.857] (II) NVIDIA(0): Initialized OpenGL Acceleration
[    28.882] (==) NVIDIA(0): Disabling shared memory pixmaps
[    28.882] (II) NVIDIA(0): Initialized X Rendering Acceleration
[    28.882] (==) NVIDIA(0): Backing store disabled
[    28.882] (==) NVIDIA(0): Silken mouse enabled
[    28.885] (==) NVIDIA(0): DPMS enabled
[    28.885] (II) Loading extension NV-CONTROL
[    28.885] (II) Loading extension XINERAMA
[    28.885] (II) Loading sub module "dri2"
[    28.885] (II) LoadModule: "dri2"
[    28.886] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[    28.886] (II) NVIDIA(0): [DRI2] Setup complete
[    28.886] (==) RandR enabled
[    28.886] (II) Initializing built-in extension Generic Event Extension
[    28.886] (II) Initializing built-in extension SHAPE
[    28.886] (II) Initializing built-in extension MIT-SHM
[    28.886] (II) Initializing built-in extension XInputExtension
[    28.886] (II) Initializing built-in extension XTEST
[    28.886] (II) Initializing built-in extension BIG-REQUESTS
[    28.886] (II) Initializing built-in extension SYNC
[    28.886] (II) Initializing built-in extension XKEYBOARD
[    28.886] (II) Initializing built-in extension XC-MISC
[    28.886] (II) Initializing built-in extension SECURITY
[    28.886] (II) Initializing built-in extension XINERAMA
[    28.886] (II) Initializing built-in extension XFIXES
[    28.886] (II) Initializing built-in extension RENDER
[    28.886] (II) Initializing built-in extension RANDR
[    28.886] (II) Initializing built-in extension COMPOSITE
[    28.886] (II) Initializing built-in extension DAMAGE
[    28.886] (II) Initializing built-in extension GESTURE
[    28.886] (II) Initializing extension GLX
[    28.920] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    28.928] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    28.928] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    28.928] (II) LoadModule: "evdev"
[    28.928] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    28.928] (II) Module evdev: vendor="X.Org Foundation"
[    28.928]     compiled for 1.9.0, module version = 2.3.2
[    28.928]     Module class: X.Org XInput Driver
[    28.928]     ABI class: X.Org XInput driver, version 11.0
[    28.928] (**) Power Button: always reports core events
[    28.928] (**) Power Button: Device: "/dev/input/event2"
[    28.940] (II) Power Button: Found keys
[    28.940] (II) Power Button: Configuring as keyboard
[    28.940] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    28.940] (**) Option "xkb_rules" "evdev"
[    28.940] (**) Option "xkb_model" "pc105"
[    28.940] (**) Option "xkb_layout" "pl"
[    28.942] (II) XKB: reuse xkmfile /var/lib/xkb/server-61818C6B46DD4F01AE1F641F27B555591612208F.xkm
[    28.943] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    28.943] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    28.943] (**) Video Bus: always reports core events
[    28.943] (**) Video Bus: Device: "/dev/input/event6"
[    28.953] (II) Video Bus: Found keys
[    28.953] (II) Video Bus: Configuring as keyboard
[    28.953] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    28.953] (**) Option "xkb_rules" "evdev"
[    28.953] (**) Option "xkb_model" "pc105"
[    28.953] (**) Option "xkb_layout" "pl"
[    28.954] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    28.954] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    28.954] (**) Power Button: always reports core events
[    28.954] (**) Power Button: Device: "/dev/input/event1"
[    28.965] (II) Power Button: Found keys
[    28.965] (II) Power Button: Configuring as keyboard
[    28.965] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    28.965] (**) Option "xkb_rules" "evdev"
[    28.965] (**) Option "xkb_model" "pc105"
[    28.965] (**) Option "xkb_layout" "pl"
[    28.965] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    28.965] (II) No input driver/identifier specified (ignoring)
[    28.966] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event7)
[    28.966] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[    28.966] (**) USB 2.0 Camera: always reports core events
[    28.966] (**) USB 2.0 Camera: Device: "/dev/input/event7"
[    28.981] (II) USB 2.0 Camera: Found keys
[    28.981] (II) USB 2.0 Camera: Configuring as keyboard
[    28.981] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD)
[    28.981] (**) Option "xkb_rules" "evdev"
[    28.981] (**) Option "xkb_model" "pc105"
[    28.981] (**) Option "xkb_layout" "pl"
[    28.983] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[    28.983] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    28.983] (**) Logitech USB Receiver: always reports core events
[    28.983] (**) Logitech USB Receiver: Device: "/dev/input/event4"
[    28.993] (II) Logitech USB Receiver: Found 20 mouse buttons
[    28.993] (II) Logitech USB Receiver: Found scroll wheel(s)
[    28.993] (II) Logitech USB Receiver: Found relative axes
[    28.993] (II) Logitech USB Receiver: Found x and y relative axes
[    28.993] (II) Logitech USB Receiver: Configuring as mouse
[    28.993] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    28.993] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    28.993] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
[    28.993] (II) Logitech USB Receiver: initialized for relative axes.
[    28.993] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    28.993] (II) No input driver/identifier specified (ignoring)
[    28.993] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[    28.993] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    28.993] (**) Logitech USB Receiver: always reports core events
[    28.993] (**) Logitech USB Receiver: Device: "/dev/input/event5"
[    29.009] (II) Logitech USB Receiver: Found 1 mouse buttons
[    29.009] (II) Logitech USB Receiver: Found scroll wheel(s)
[    29.009] (II) Logitech USB Receiver: Found relative axes
[    29.009] (II) Logitech USB Receiver: Found absolute axes
[    29.009] (II) evdev-grail: failed to open grail, no gesture support
[    29.009] (II) Logitech USB Receiver: Found keys
[    29.009] (II) Logitech USB Receiver: Configuring as mouse
[    29.009] (II) Logitech USB Receiver: Configuring as keyboard
[    29.009] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    29.009] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    29.009] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[    29.009] (**) Option "xkb_rules" "evdev"
[    29.009] (**) Option "xkb_model" "pc105"
[    29.009] (**) Option "xkb_layout" "pl"
[    29.009] (EE) Logitech USB Receiver: failed to initialize for relative axes.
[    29.009] (II) Logitech USB Receiver: initialized for absolute axes.
[    29.012] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    29.012] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    29.012] (**) AT Translated Set 2 keyboard: always reports core events
[    29.012] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    29.021] (II) AT Translated Set 2 keyboard: Found keys
[    29.021] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    29.021] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    29.021] (**) Option "xkb_rules" "evdev"
[    29.021] (**) Option "xkb_model" "pc105"
[    29.021] (**) Option "xkb_layout" "pl"
[    29.021] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event8)
[    29.021] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    29.021] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    29.021] (II) LoadModule: "synaptics"
[    29.021] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    29.022] (II) Module synaptics: vendor="X.Org Foundation"
[    29.022]     compiled for 1.9.0, module version = 1.2.2
[    29.022]     Module class: X.Org XInput Driver
[    29.022]     ABI class: X.Org XInput driver, version 11.0
[    29.022] (II) Synaptics touchpad driver version 1.2.2
[    29.022] (**) Option "Device" "/dev/input/event8"
[    29.080] (II) ETPS/2 Elantech Touchpad: x-axis range 32 - 544
[    29.080] (II) ETPS/2 Elantech Touchpad: y-axis range 32 - 352
[    29.080] (II) ETPS/2 Elantech Touchpad: device does not report pressure, will use touch data.
[    29.080] (II) ETPS/2 Elantech Touchpad: finger width range 0 - 0
[    29.080] (II) ETPS/2 Elantech Touchpad: buttons: left right double triple
[    29.120] (--) ETPS/2 Elantech Touchpad: touchpad found
[    29.120] (**) ETPS/2 Elantech Touchpad: always reports core events
[    29.136] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD)
[    29.136] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    29.136] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 0
[    29.136] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    29.136] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    29.168] (--) ETPS/2 Elantech Touchpad: touchpad found
[    29.168] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    29.168] (II) No input driver/identifier specified (ignoring)
To wszystko wtedy, kiedy działa touchpad. A kiedy działa? To czysta loteria. Raz włączę, działa, innym razem - nie. Mysz na USB działa za każdym razem.

Próbowałem już:

ALT+CTRL+F1
sudo su
service gdm stop
Xorg -configure
reboot
nie zawsze działa. Poza tym robiłem też to - dopisałem do pliku /etc/X11/xorg.conf :

Section "InputClass"
        Identifier "touchpad catchall"
        Driver "synaptics"
        MatchIsTouchpad "on"
        MatchDevicePath "/dev/input/event*"
EndSection
i dalej lipa. Raz działa, raz nie. Pomocy! :(