Brak Internetu (Netbook Asus + router ADSL + Ubuntu 11.04)

[aramin]

Witam serdecznie

 Zakupiłem netbook Asus Eee PC 1001PX (Seashell) z fabrycznym Windows 7 Starter. Na wyjeździe łączyłem się z Internetem np. w restauracji McDonald's, czy KFC. Nie było problemu.

 Windows 7 Starter drażnił mnie więc wrzuciłem na niego Ubuntu 11.04. Chciałem, aby system po instalacji zaktualizował się. Internet mam z TP S.a. Neostrada za pomocą kablowego modemu/routera PENTAGRAM Cerberus P 6311-07A . Dotychczas doskonale współpracował z komputerem PC, na którym jest Ubuntu 10.10. Chciałem przełożyć kabel z PC do netbook'a aby pobrać te aktualizacje, ale nie ma połączenia.

 Co robić?

 Z góry dziękuję

Kod: [Zaznacz]

michal@mnetbook:~$ lspci 
 00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge 
 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller 
 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller 
 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) 
 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) 
 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) 
 00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02) 
 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02) 
 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) 
 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) 
 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) 
 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) 
 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 
 00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02) 
 00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02) 
 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02) 
 01:00.0 Ethernet controller: Atheros Communications AR8132 Fast Ethernet (rev c0) 
 02:00.0 Network controller: Atheros Communications Inc. AR2427 Wireless Network Adapter (PCI-Express) (rev 01) 
 michal@mnetbook:~$

Kod: [Zaznacz]

 michal@mnetbook:~$ lshw -C network 
 WARNING: you should run this program as super-user. 
   *-network               
        description: Wireless interface 
        product: AR2427 Wireless Network Adapter (PCI-Express) 
        vendor: Atheros Communications Inc. 
        physical id: 0 
        bus info: pci@0000:02:00.0 
        logical name: wlan0 
        version: 01 
        serial: 74:f0:6d:23:7b:ab 
        width: 64 bits 
        clock: 33MHz 
        capabilities: bus_master cap_list ethernet physical wireless 
        configuration: broadcast=yes driver=ath9k driverversion=2.6.38-8-generic firmware=N/A latency=0 multicast=yes wireless=IEEE 802.11bg 
        resources: irq:17 memory:fbff0000-fbffffff 
   *-network 
        description: Ethernet interface 
        product: AR8132 Fast Ethernet 
        vendor: Atheros Communications 
        physical id: 0 
        bus info: pci@0000:01:00.0 
        logical name: eth0 
        version: c0 
        serial: 20:cf:30:61:13:6a 
        size: 100Mbit/s 
        capacity: 100Mbit/s 
        width: 64 bits 
        clock: 33MHz 
        capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation 
        configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A latency=0 multicast=yes port=twisted pair speed=100Mbit/s 
        resources: irq:44 memory:f7fc0000-f7ffffff ioport:ec00(size=128) 
 WARNING: output may be incomplete or inaccurate, you should run this program as super-user. 
 michal@mnetbook:~$

Kod: [Zaznacz]

 michal@mnetbook:~$ ifconfig 
 eth0      Link encap:Ethernet  HWaddr 20:cf:30:61:13:6a  
           inet6 addr: fe80::22cf:30ff:fe61:136a/64 Scope:Link 
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1 
           RX packets:14 errors:0 dropped:0 overruns:0 frame:0 
           TX packets:9 errors:0 dropped:0 overruns:0 carrier:5 
           collisions:0 txqueuelen:1000 
           RX bytes:1982 (1.9 KB)  TX bytes:2302 (2.3 KB) 
           Interrupt:44 

 lo        Link encap:Local Loopback  
           inet addr:127.0.0.1  Mask:255.0.0.0 
           inet6 addr: ::1/128 Scope:Host 
           UP LOOPBACK RUNNING  MTU:16436  Metric:1 
           RX packets:108 errors:0 dropped:0 overruns:0 frame:0 
           TX packets:108 errors:0 dropped:0 overruns:0 carrier:0 
           collisions:0 txqueuelen:0 
           RX bytes:8304 (8.3 KB)  TX bytes:8304 (8.3 KB) 

 wlan0     Link encap:Ethernet  HWaddr 74:f0:6d:23:7b:ab  
           inet6 addr: fe80::76f0:6dff:fe23:7bab/64 Scope:Link 
           UP BROADCAST MULTICAST  MTU:1500  Metric:1 
           RX packets:613 errors:0 dropped:0 overruns:0 frame:0 
           TX packets:25 errors:0 dropped:0 overruns:0 carrier:0 
           collisions:0 txqueuelen:1000 
           RX bytes:88710 (88.7 KB)  TX bytes:7113 (7.1 KB) 

 michal@mnetbook:~$

Kod: [Zaznacz]

 michal@mnetbook:~$ lsmod 
 Module                  Size  Used by 
 parport_pc             32111  0 
 ppdev                  12849  0 
 snd_hda_codec_realtek   255820  1 
 joydev                 17322  0 
 snd_hda_intel          24140  2 
 arc4                   12473  2 
 snd_hda_codec          90901  2 snd_hda_codec_realtek,snd_hda_intel 
 snd_hwdep              13274  1 snd_hda_codec 
 i915                  450944  3 
 binfmt_misc            13213  1 
 snd_pcm                80244  2 snd_hda_intel,snd_hda_codec 
 ath9k                 103633  0 
 snd_seq_midi           13132  0 
 snd_rawmidi            25269  1 snd_seq_midi 
 snd_seq_midi_event     14475  1 snd_seq_midi 
 eeepc_wmi              18771  0 
 snd_seq                51291  2 snd_seq_midi,snd_seq_midi_event 
 uvcvideo               66851  0 
 sparse_keymap          13666  1 eeepc_wmi 
 mac80211              257001  1 ath9k 
 drm_kms_helper         40745  1 i915 
 psmouse                73312  0 
 snd_timer              28659  2 snd_pcm,snd_seq 
 videodev               75143  1 uvcvideo 
 drm                   180037  4 i915,drm_kms_helper 
 snd_seq_device         14110  3 snd_seq_midi,snd_rawmidi,snd_seq 
 ath9k_common           13611  1 ath9k 
 serio_raw              12990  0 
 ath9k_hw              300328  2 ath9k,ath9k_common 
 snd                    55295  13 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,​snd_seq,snd_timer,snd_seq_device 
 ath                    19141  2 ath9k,ath9k_hw 
 cfg80211              156212  3 ath9k,mac80211,ath 
 i2c_algo_bit           13184  1 i915 
 soundcore              12600  1 snd 
 snd_page_alloc         14073  2 snd_hda_intel,snd_pcm 
 video                  18951  1 i915 
 lp                     13349  0 
 parport                36746  3 parport_pc,ppdev,lp 
 ahci                   21591  2 
 atl1c                  36237  0 
 libahci                25548  1 ahci 
 michal@mnetbook:~$

dmesg:

Kod: [Zaznacz]

[ 0.914023] uhci_hcd 0000:00:1d.2: UHCI Host Controller 
[ 0.914124] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 
[ 0.916098] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800 
[ 0.916419] hub 4-0:1.0: USB hub found 
[ 0.916431] hub 4-0:1.0: 2 ports detected 
[ 0.916578] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 
[ 0.916592] uhci_hcd 0000:00:1d.3: setting latency timer to 64 
[ 0.916599] uhci_hcd 0000:00:1d.3: UHCI Host Controller 
[ 0.916702] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 
[ 0.916805] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880 
[ 0.917104] hub 5-0:1.0: USB hub found 
[ 0.917114] hub 5-0:1.0: 2 ports detected 
[ 0.917377] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 
[ 0.935056] serio: i8042 KBD port at 0x60,0x64 irq 1 
[ 0.935074] serio: i8042 AUX port at 0x60,0x64 irq 12 
[ 0.935411] mousedev: PS/2 mouse device common for all mice 
[ 0.936492] rtc_cmos 00:03: RTC can wake from S4 
[ 0.936646] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 
[ 0.936687] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs 
[ 0.936928] device-mapper: uevent: version 1.0.3 
[ 0.937141] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com 
[ 0.937310] device-mapper: multipath: version 1.2.0 loaded 
[ 0.937319] device-mapper: multipath round-robin: version 1.0.0 loaded 
[ 0.937539] EISA: Probing bus 0 at eisa.0 
[ 0.937548] EISA: Cannot allocate resource for mainboard 
[ 0.937554] Cannot allocate resource for EISA slot 1 
[ 0.937560] Cannot allocate resource for EISA slot 2 
[ 0.937565] Cannot allocate resource for EISA slot 3 
[ 0.937571] Cannot allocate resource for EISA slot 4 
[ 0.937576] Cannot allocate resource for EISA slot 5 
[ 0.937581] Cannot allocate resource for EISA slot 6 
[ 0.937587] Cannot allocate resource for EISA slot 7 
[ 0.937592] Cannot allocate resource for EISA slot 8 
[ 0.937597] EISA: Detected 0 cards. 
[ 0.937890] cpuidle: using governor ladder 
[ 0.938156] cpuidle: using governor menu 
[ 0.938780] TCP cubic registered 
[ 0.939124] NET: Registered protocol family 10 
[ 0.940402] NET: Registered protocol family 17 
[ 0.940451] Registering the dns_resolver key type 
[ 0.941519] Using IPI No-Shortcut mode 
[ 0.941789] PM: Hibernation image not present or could not be loaded. 
[ 0.941815] registered taskstats version 1 
[ 0.942218] Magic number: 11:164:338 
[ 0.942261] tty tty59: hash matches 
[ 0.942361] rtc_cmos 00:03: setting system clock to 2011-05-16 16:20:17 UTC (1305562817) 
[ 0.942371] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found 
[ 0.942375] EDD information not available. 
[ 0.942571] Freeing unused kernel memory: 700k freed 
[ 0.943028] Write protecting the kernel text: 5192k 
[ 0.943113] Write protecting the kernel read-only data: 2148k 
[ 0.953029] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 
[ 0.998340] <30>udev[64]: starting version 167 
[ 1.207698] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 
[ 1.207726] atl1c 0000:01:00.0: setting latency timer to 64 
[ 1.224125] usb 1-6: new high speed USB device using ehci_hcd and address 2 
[ 1.318015] atl1c 0000:01:00.0: version 1.0.1.0-NAPI 
[ 1.349217] ahci 0000:00:1f.2: version 3.0 
[ 1.349275] ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 
[ 1.349367] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X 
[ 1.349482] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode 
[ 1.349495] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
[ 1.349508] ahci 0000:00:1f.2: setting latency timer to 64 
[ 1.351545] scsi0 : ahci 
[ 1.352211] scsi1 : ahci 
[ 1.352518] scsi2 : ahci 
[ 1.356881] scsi3 : ahci 
[ 1.357651] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 43 
[ 1.357661] ata2: DUMMY 
[ 1.357667] ata3: DUMMY 
[ 1.357672] ata4: DUMMY 
[ 2.080074] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) 
[ 2.081156] ata1.00: unexpected _GTF length (8) 
[ 2.139033] ata1.00: ATA-8: ST9250315AS, 0003SDM1, max UDMA/133 
[ 2.139046] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) 
[ 2.141019] ata1.00: unexpected _GTF length (8) 
[ 2.141380] ata1.00: configured for UDMA/133 
[ 2.141677] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0003 PQ: 0 ANSI: 5 
[ 2.142233] sd 0:0:0:0: Attached scsi generic sg0 type 0 
[ 2.142262] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) 
[ 2.142524] sd 0:0:0:0: [sda] Write Protect is off 
[ 2.142534] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 
[ 2.142644] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
[ 2.184855] sda: sda1 sda2 < sda5 > 
[ 2.185810] sd 0:0:0:0: [sda] Attached SCSI disk 
[ 2.581697] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) 
[ 11.576220] Adding 1037308k swap on /dev/sda5. Priority:-1 extents:1 across:1037308k 
[ 11.638100] <30>udev[270]: starting version 167 
[ 11.723790] lp: driver loaded but no devices found 
[ 11.756172] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro 
[ 12.234589] type=1400 audit(1305555628.789:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=432 comm="apparmor_parser" 
[ 12.235703] type=1400 audit(1305555628.789:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=432 comm="apparmor_parser" 
[ 12.236477] type=1400 audit(1305555628.793:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=432 comm="apparmor_parser" 
[ 12.793718] atl1c 0000:01:00.0: irq 44 for MSI/MSI-X 
[ 12.793835] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> 
[ 12.866478] cfg80211: Calling CRDA to update world regulatory domain 
[ 13.010303] Linux video capture interface: v2.00 
[ 13.012393] [drm] Initialized drm 1.1.0 20060810 
[ 13.178553] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5702) 
[ 13.202912] input: USB2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input5 
[ 13.203289] usbcore: registered new interface driver uvcvideo 
[ 13.203296] USB Video Class driver (v1.0.0) 
[ 13.560129] type=1400 audit(1305555630.117:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=598 comm="apparmor_parser" 
[ 13.566751] type=1400 audit(1305555630.121:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=599 comm="apparmor_parser" 
[ 13.569487] type=1400 audit(1305555630.125:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=599 comm="apparmor_parser" 
[ 13.570220] type=1400 audit(1305555630.125:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=599 comm="apparmor_parser" 
[ 13.624079] type=1400 audit(1305555630.181:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=602 comm="apparmor_parser" 
[ 13.637317] type=1400 audit(1305555630.193:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=605 comm="apparmor_parser" 
[ 13.648534] type=1400 audit(1305555630.205:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=602 comm="apparmor_parser" 
[ 14.107814] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04733/0xa40000/0xa0000 
[ 14.179338] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 
[ 14.346859] cfg80211: World regulatory domain updated: 
[ 14.346870] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) 
[ 14.346881] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[ 14.346891] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) 
[ 14.346901] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) 
[ 14.346910] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[ 14.346920] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[ 14.444730] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7 
[ 14.561949] eeepc_wmi: Backlight controlled by ACPI video driver 
[ 14.595527] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 
[ 14.595543] i915 0000:00:02.0: setting latency timer to 64 
[ 14.690212] i915 0000:00:02.0: irq 45 for MSI/MSI-X 
[ 14.690229] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). 
[ 14.690237] [drm] Driver supports precise vblank timestamp query. 
[ 14.708333] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 
[ 14.708355] ath9k 0000:02:00.0: setting latency timer to 64 
[ 14.777569] ath: EEPROM regdomain: 0x60 
[ 14.777579] ath: EEPROM indicates we should expect a direct regpair map 
[ 14.777589] ath: Country alpha2 being used: 00 
[ 14.777595] ath: Regpair used: 0x60 
[ 14.777604] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: 
[ 14.777615] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) 
[ 14.777624] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: 
[ 14.777634] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) 
[ 14.777643] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: 
[ 14.777653] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) 
[ 14.777661] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: 
[ 14.777671] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) 
[ 14.777679] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: 
[ 14.777689] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) 
[ 14.777697] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: 
[ 14.777707] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) 
[ 14.777716] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: 
[ 14.777726] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) 
[ 14.777734] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: 
[ 14.777744] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) 
[ 14.777753] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: 
[ 14.777763] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) 
[ 14.777772] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: 
[ 14.777781] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) 
[ 14.777790] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: 
[ 14.777800] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) 
[ 14.777808] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: 
[ 14.777818] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) 
[ 14.777827] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: 
[ 14.777837] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) 
[ 14.777846] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: 
[ 14.777856] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (N/A mBi, 2000 mBm) 
[ 14.793223] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[ 14.804672] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem 
[ 14.805194] [drm] initialized overlay support 
[ 14.847468] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' 
[ 14.851994] Registered led device: ath9k-phy0::radio 
[ 14.852427] Registered led device: ath9k-phy0::assoc 
[ 14.852748] Registered led device: ath9k-phy0::tx 
[ 14.853072] Registered led device: ath9k-phy0::rx 
[ 14.853101] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8460000, irq=17 
[ 14.936902] ADDRCONF(NETDEV_UP): wlan0: link is not ready 
[ 15.077439] Console: switching to colour frame buffer device 128x37 
[ 15.077516] fb0: inteldrmfb frame buffer device 
[ 15.077522] drm: registered panic notifier 
[ 15.085404] ACPI Warning: _BQC returned an invalid level (20110112/video-473) 
[ 15.090252] acpi device:2c: registered as cooling_device2 
[ 15.090660] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8 
[ 15.090985] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) 
[ 15.091568] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 
[ 15.091691] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 
[ 15.091807] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X 
[ 15.091865] HDA Intel 0000:00:1b.0: setting latency timer to 64 
[ 15.206544] hda_codec: ALC269VB: BIOS auto-probing. 
[ 15.245132] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 
[ 15.753446] ppdev: user-space parallel port driver 
[ 15.960350] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0 
[ 20.235674] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600 
[ 23.648064] eth0: no IPv6 routers present 
[ 292.594363] wlan0: authenticate with 00:02:6f:4f:fb:d9 (try 1) 
[ 292.596899] wlan0: authenticated 
[ 292.614532] wlan0: associate with 00:02:6f:4f:fb:d9 (try 1) 
[ 292.624056] wlan0: RX AssocResp from 00:02:6f:4f:fb:d9 (capab=0x401 status=0 aid=2) 
[ 292.624067] wlan0: associated 
[ 292.624968] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready 
[ 303.208080] wlan0: no IPv6 routers present 
[ 338.222225] wlan0: deauthenticating from 00:02:6f:4f:fb:d9 by local choice (reason=3) 
[ 338.250907] cfg80211: All devices are disconnected, going to restore regulatory settings 
[ 338.250919] cfg80211: Restoring regulatory settings 
[ 338.250958] cfg80211: Calling CRDA to update world regulatory domain 
[ 338.265481] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[ 338.265499] cfg80211: World regulatory domain updated: 
[ 338.265505] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) 
[ 338.265516] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[ 338.265526] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) 
[ 338.265535] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) 
[ 338.265544] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[ 338.265553] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[ 342.098600] wlan0: authenticate with 00:02:6f:48:63:cd (try 1) 
[ 342.106333] wlan0: authenticated 
[ 342.123911] wlan0: associate with 00:02:6f:48:63:cd (try 1) 
[ 342.128934] wlan0: RX AssocResp from 00:02:6f:48:63:cd (capab=0x401 status=0 aid=3) 
[ 342.128946] wlan0: associated 
[ 369.055423] cfg80211: All devices are disconnected, going to restore regulatory settings 
[ 369.055437] cfg80211: Restoring regulatory settings 
[ 369.055448] cfg80211: Calling CRDA to update world regulatory domain 
[ 369.065870] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[ 369.065884] cfg80211: World regulatory domain updated: 
[ 369.065889] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) 
[ 369.065897] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[ 369.065904] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) 
[ 369.065910] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) 
[ 369.065917] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[ 369.065923] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[ 370.258822] wlan0: authenticate with 00:02:6f:48:63:cd (try 1) 
[ 370.260922] wlan0: authenticated 
[ 370.278358] wlan0: associate with 00:02:6f:48:63:cd (try 1) 
[ 370.281523] wlan0: RX AssocResp from 00:02:6f:48:63:cd (capab=0x401 status=0 aid=3) 
[ 370.281534] wlan0: associated 
[ 387.212539] wlan0: deauthenticating from 00:02:6f:48:63:cd by local choice (reason=3) 
[ 387.247016] cfg80211: All devices are disconnected, going to restore regulatory settings 
[ 387.247029] cfg80211: Restoring regulatory settings 
[ 387.247061] cfg80211: Calling CRDA to update world regulatory domain 
[ 387.260627] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[ 387.260645] cfg80211: World regulatory domain updated: 
[ 387.260652] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) 
[ 387.260662] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[ 387.260671] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) 
[ 387.260680] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) 
[ 387.260690] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[ 387.260699] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[ 570.763101] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down 
[ 2659.424975] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 
[ 2662.103791] PM: Syncing filesystems ... done. 
[ 2662.107815] PM: Preparing system for mem sleep 
[ 2662.344353] Freezing user space processes ... (elapsed 0.01 seconds) done. 
[ 2662.360182] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. 
[ 2662.376174] PM: Entering mem sleep 
[ 2662.376227] Suspending console(s) (use no_console_suspend to debug) 
[ 2662.376851] sd 0:0:0:0: [sda] Synchronizing SCSI cache 
[ 2662.455130] ehci_hcd 0000:00:1d.7: PCI INT A disabled 
[ 2662.455153] uhci_hcd 0000:00:1d.3: PCI INT D disabled 
[ 2662.455174] uhci_hcd 0000:00:1d.2: PCI INT C disabled 
[ 2662.455193] uhci_hcd 0000:00:1d.1: PCI INT B disabled 
[ 2662.455213] uhci_hcd 0000:00:1d.0: PCI INT A disabled 
[ 2662.523914] sd 0:0:0:0: [sda] Stopping disk 
[ 2662.556165] HDA Intel 0000:00:1b.0: PCI INT A disabled 
[ 2662.556208] ACPI handle has no context! 
[ 2662.572065] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 116.811 msecs 
[ 2662.912417] PM: suspend of drv:sd dev:0:0:0:0 complete after 535.575 msecs 
[ 2662.912461] PM: suspend of drv:scsi dev:target0:0:0 complete after 535.540 msecs 
[ 2662.912498] PM: suspend of drv:scsi dev:host0 complete after 535.454 msecs 
[ 2662.928070] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 473.062 msecs 
[ 2662.928123] PM: suspend of drv: dev:pci0000:00 complete after 472.141 msecs 
[ 2662.928147] PM: suspend of devices complete after 551.627 msecs 
[ 2662.928154] PM: suspend devices took 0.552 seconds 
[ 2662.928721] atl1c 0000:01:00.0: PME# enabled 
[ 2662.928746] pcieport 0000:00:1c.3: wake-up capability enabled by ACPI 
[ 2662.976329] PM: late suspend of devices complete after 48.164 msecs 
[ 2662.976377] ACPI: Preparing to enter system sleep state S3 
[ 2663.004769] PM: Saving platform NVS memory 
[ 2663.005638] Disabling non-boot CPUs ... 
[ 2663.108074] CPU 1 is now offline 
[ 2663.108665] Extended CMOS year: 2000 
[ 2663.108665] Back to C! 
[ 2663.108665] PM: Restoring platform NVS memory 
[ 2663.108665] Extended CMOS year: 2000 
[ 2663.108665] Enabling non-boot CPUs ... 
[ 2663.108665] Booting Node 0 Processor 1 APIC 0x1 
[ 2663.007168] Initializing CPU#1 
[ 2663.200055] Switched to NOHz mode on CPU #1 
[ 2663.200199] CPU1 is up 
[ 2663.200642] ACPI: Waking up from system sleep state S3 
[ 2663.256517] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) 
[ 2663.256591] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) 
[ 2663.256634] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fa13f91) 
[ 2663.256644] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x3f803f70) 
[ 2663.256653] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x1010) 
[ 2663.256668] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) 
[ 2663.256729] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x2020) 
[ 2663.256744] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100106, writing 0x100507) 
[ 2663.256803] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fc13fb1) 
[ 2663.256820] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) 
[ 2663.256882] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) 
[ 2663.256921] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) 
[ 2663.256959] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) 
[ 2663.256996] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) 
[ 2663.257044] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) 
[ 2663.257173] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) 
[ 2663.257271] ath9k 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a) 
[ 2663.257300] ath9k 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfbff0004) 
[ 2663.257309] ath9k 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) 
[ 2663.257321] ath9k 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) 
[ 2663.257837] PM: early resume of devices complete after 1.474 msecs 
[ 2663.257988] i915 0000:00:02.0: setting latency timer to 64 
[ 2663.258062] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 
[ 2663.258074] HDA Intel 0000:00:1b.0: setting latency timer to 64 
[ 2663.258137] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X 
[ 2663.258224] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 
[ 2663.258237] uhci_hcd 0000:00:1d.0: setting latency timer to 64 
[ 2663.258267] usb usb2: root hub lost power or was reset 
[ 2663.258291] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 
[ 2663.258303] uhci_hcd 0000:00:1d.1: setting latency timer to 64 
[ 2663.258331] usb usb3: root hub lost power or was reset 
[ 2663.258354] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 
[ 2663.258365] uhci_hcd 0000:00:1d.2: setting latency timer to 64 
[ 2663.258393] usb usb4: root hub lost power or was reset 
[ 2663.258415] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 
[ 2663.258427] uhci_hcd 0000:00:1d.3: setting latency timer to 64 
[ 2663.258454] usb usb5: root hub lost power or was reset 
[ 2663.258479] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 
[ 2663.258491] ehci_hcd 0000:00:1d.7: setting latency timer to 64 
[ 2663.258590] pci 0000:00:1e.0: setting latency timer to 64 
[ 2663.258620] ahci 0000:00:1f.2: setting latency timer to 64 
[ 2663.272190] pcieport 0000:00:1c.3: wake-up capability disabled by ACPI 
[ 2663.272207] atl1c 0000:01:00.0: PME# disabled 
[ 2663.273565] sd 0:0:0:0: [sda] Starting disk 
[ 2663.389894] PM: resume of drv:battery dev:PNP0C0A:00 complete after 117.568 msecs 
[ 2663.392105] PM: resume of drv:usb dev:usb2 complete after 119.608 msecs 
[ 2663.392149] PM: resume of drv:hub dev:2-0:1.0 complete after 119.635 msecs 
[ 2663.392171] PM: resume of drv:usb dev:usb3 complete after 119.445 msecs 
[ 2663.392190] PM: resume of drv: dev:ep_00 complete after 119.519 msecs 
[ 2663.392204] PM: resume of drv: dev:ep_81 complete after 119.600 msecs 
[ 2663.392223] PM: resume of drv:usb dev:usb4 complete after 119.191 msecs 
[ 2663.392282] PM: resume of drv:usb dev:usb5 complete after 119.006 msecs 
[ 2663.392291] PM: resume of drv: dev:ep_00 complete after 119.068 msecs 
[ 2663.392308] PM: resume of drv:hub dev:3-0:1.0 complete after 119.520 msecs 
[ 2663.392329] PM: resume of drv: dev:ep_00 complete after 118.871 msecs 
[ 2663.392336] PM: resume of drv: dev:ep_00 complete after 119.430 msecs 
[ 2663.392362] PM: resume of drv: dev:ep_81 complete after 119.514 msecs 
[ 2663.392369] PM: resume of drv:hub dev:4-0:1.0 complete after 119.264 msecs 
[ 2663.392394] PM: resume of drv:hub dev:5-0:1.0 complete after 119.054 msecs 
[ 2663.392402] PM: resume of drv: dev:ep_81 complete after 119.244 msecs 
[ 2663.392414] PM: resume of drv: dev:ep_81 complete after 119.015 msecs 
[ 2663.400076] PM: resume of drv:usb dev:usb1 complete after 128.243 msecs 
[ 2663.400122] PM: resume of drv:hub dev:1-0:1.0 complete after 127.653 msecs 
[ 2663.400147] PM: resume of drv: dev:ep_00 complete after 127.664 msecs 
[ 2663.400175] PM: resume of drv: dev:ep_81 complete after 127.703 msecs 
[ 2663.512090] usb 1-6: reset high speed USB device using ehci_hcd and address 2 
[ 2664.261743] PM: resume of drv:usb dev:1-6 complete after 988.005 msecs 
[ 2664.261783] PM: resume of drv:uvcvideo dev:1-6:1.0 complete after 987.987 msecs 
[ 2664.261827] PM: resume of drv: dev:ep_00 complete after 987.866 msecs 
[ 2664.261835] PM: resume of drv:uvcvideo dev:1-6:1.1 complete after 987.929 msecs 
[ 2664.261843] PM: resume of drv: dev:ep_83 complete after 987.992 msecs 
[ 2664.992141] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) 
[ 2664.999505] ata1.00: unexpected _GTF length (8) 
[ 2665.001985] ata1.00: unexpected _GTF length (8) 
[ 2665.002325] ata1.00: configured for UDMA/133 
[ 2665.042240] PM: resume of drv:sd dev:0:0:0:0 complete after 1768.674 msecs 
[ 2665.042283] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1768.603 msecs 
[ 2665.042329] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1599.211 msecs 
[ 2665.045983] PM: resume of devices complete after 1788.070 msecs 
[ 2665.046290] PM: resume devices took 1.788 seconds 
[ 2665.046351] PM: Finishing wakeup. 
[ 2665.046355] Restarting tasks ... 
[ 2665.047637] hub 1-0:1.0: over-current change on port 1 
[ 2665.148116] hub 1-0:1.0: over-current change on port 2 
[ 2665.149097] done. 
[ 2665.149111] video LNXVIDEO:00: Restoring backlight state 
[ 2665.205849] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id 
[ 2665.252079] hub 1-0:1.0: over-current change on port 3 
[ 2665.947800] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X 
[ 2666.005204] ADDRCONF(NETDEV_UP): eth0: link is not ready 
[ 2666.046437] ADDRCONF(NETDEV_UP): wlan0: link is not ready 
[ 2668.046683] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600 
[ 2668.407323] wlan0: authenticate with 00:02:6f:48:63:cd (try 1) 
[ 2668.410271] wlan0: authenticated 
[ 2668.428852] wlan0: associate with 00:02:6f:48:63:cd (try 1) 
[ 2668.432115] wlan0: RX AssocResp from 00:02:6f:48:63:cd (capab=0x401 status=0 aid=2) 
[ 2668.432127] wlan0: associated 
[ 2668.432931] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready 
[ 2672.781371] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> 
[ 2672.782265] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 
[ 2678.496054] wlan0: no IPv6 routers present 
[ 2682.968057] eth0: no IPv6 routers present 
[ 2714.208432] wlan0: deauthenticating from 00:02:6f:48:63:cd by local choice (reason=3) 
[ 2714.231320] cfg80211: All devices are disconnected, going to restore regulatory settings 
[ 2714.231335] cfg80211: Restoring regulatory settings 
[ 2714.231381] cfg80211: Calling CRDA to update world regulatory domain 
[ 2714.251980] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[ 2714.252046] cfg80211: World regulatory domain updated: 
[ 2714.252053] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) 
[ 2714.252065] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[ 2714.252074] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) 
[ 2714.252084] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) 
[ 2714.252092] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[ 2714.252101] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[ 2718.212157] wlan0: direct probe to 00:02:6f:4f:fb:d9 (try 1/3) 
[ 2718.412122] wlan0: direct probe to 00:02:6f:4f:fb:d9 (try 2/3) 
[ 2718.612090] wlan0: direct probe to 00:02:6f:4f:fb:d9 (try 3/3) 
[ 2718.812105] wlan0: direct probe to 00:02:6f:4f:fb:d9 timed out 
[ 2729.320403] wlan0: direct probe to 00:02:6f:4f:fb:d9 (try 1/3) 
[ 2729.520068] wlan0: direct probe to 00:02:6f:4f:fb:d9 (try 2/3) 
[ 2729.720066] wlan0: direct probe to 00:02:6f:4f:fb:d9 (try 3/3) 
[ 2729.920073] wlan0: direct probe to 00:02:6f:4f:fb:d9 timed out 
[ 2740.400728] wlan0: direct probe to 00:02:6f:4f:fb:d9 (try 1/3) 
[ 2740.600083] wlan0: direct probe to 00:02:6f:4f:fb:d9 (try 2/3) 
[ 2740.800069] wlan0: direct probe to 00:02:6f:4f:fb:d9 (try 3/3) 
[ 2741.000098] wlan0: direct probe to 00:02:6f:4f:fb:d9 timed out 
[ 2751.500789] wlan0: authenticate with 00:02:6f:4f:fb:d9 (try 1) 
[ 2751.503023] wlan0: authenticated 
[ 2751.521070] wlan0: associate with 00:02:6f:4f:fb:d9 (try 1) 
[ 2751.525705] wlan0: RX AssocResp from 00:02:6f:4f:fb:d9 (capab=0x401 status=0 aid=2) 
[ 2751.525714] wlan0: associated 
[ 2768.532257] atl1c 0000:01:00.0: PCI INT A disabled 
[ 2796.656797] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 
[ 2796.656842] atl1c 0000:01:00.0: setting latency timer to 64 
[ 2796.767210] atl1c 0000:01:00.0: version 1.0.1.0-NAPI 
[ 2796.815710] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X 
[ 2796.873546] ADDRCONF(NETDEV_UP): eth0: link is not ready 
[ 2797.210955] wlan0: deauthenticating from 00:02:6f:4f:fb:d9 by local choice (reason=3) 
[ 2797.234941] cfg80211: All devices are disconnected, going to restore regulatory settings 
[ 2797.234954] cfg80211: Restoring regulatory settings 
[ 2797.235009] cfg80211: Calling CRDA to update world regulatory domain 
[ 2797.254267] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[ 2797.254285] cfg80211: World regulatory domain updated: 
[ 2797.254293] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) 
[ 2797.254303] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[ 2797.254314] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) 
[ 2797.254324] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) 
[ 2797.254334] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[ 2797.254344] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[ 2799.811725] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> 
[ 2799.812629] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 
[ 2810.776044] eth0: no IPv6 routers present 
[ 2881.712046] eth0: no IPv6 routers present 
[ 2920.864246] atl1c 0000:01:00.0: PCI INT A disabled 
[ 2935.746780] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 
[ 2935.746836] atl1c 0000:01:00.0: setting latency timer to 64 
[ 2935.863213] atl1c 0000:01:00.0: version 1.0.1.0-NAPI 
[ 2935.895790] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X 
[ 2935.953269] ADDRCONF(NETDEV_UP): eth0: link is not ready 
[ 2938.752932] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> 
[ 2938.753653] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 
[ 2948.912067] eth0: no IPv6 routers present 
[ 2979.253057] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down 
[ 3188.594038] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> 
[ 3194.000054] ------------[ cut here ]------------ 
[ 3194.000080] WARNING: at /build/buildd/linux-2.6.38/net/sched/sch_generic.c:256 dev_watchdog+0x213/0x220() 
[ 3194.000090] Hardware name: 1001PX 
[ 3194.000098] NETDEV WATCHDOG: eth0 (atl1c): transmit queue 0 timed out 
[ 3194.000105] Modules linked in: atl1c parport_pc ppdev snd_hda_codec_realtek arc4 snd_hda_intel ath9k i915 snd_hda_codec mac80211 snd_hwdep binfmt_misc snd_pcm eeepc_wmi joydev sparse_keymap snd_seq_midi ath9k_common ath9k_hw snd_rawmidi uvcvideo drm_kms_helper psmouse drm ath videodev snd_seq_midi_event cfg80211 snd_seq snd_timer snd_seq_device snd serio_raw i2c_algo_bit soundcore snd_page_alloc video lp parport ahci libahci [last unloaded: atl1c] 
[ 3194.000222] Pid: 0, comm: kworker/0:0 Not tainted 2.6.38-8-generic #42-Ubuntu 
[ 3194.000230] Call Trace: 
[ 3194.000248] [] ? warn_slowpath_common+0x72/0xa0 
[ 3194.000262] [] ? dev_watchdog+0x213/0x220 
[ 3194.000274] [] ? dev_watchdog+0x213/0x220 
[ 3194.000288] [] ? warn_slowpath_fmt+0x33/0x40 
[ 3194.000301] [] ? dev_watchdog+0x213/0x220 
[ 3194.000314] [] ? __queue_work+0xe1/0x360 
[ 3194.000329] [] ? call_timer_fn+0x2b/0xe0 
[ 3194.000342] [] ? cascade+0x65/0x80 
[ 3194.000354] [] ? dev_watchdog+0x0/0x220 
[ 3194.000365] [] ? run_timer_softirq+0xe9/0x1e0 
[ 3194.000378] [] ? dev_watchdog+0x0/0x220 
[ 3194.000391] [] ? __do_softirq+0x82/0x170 
[ 3194.000403] [] ? __do_softirq+0x0/0x170 
[ 3194.000411]  [] ? irq_exit+0x6d/0x80 
[ 3194.000433] [] ? smp_apic_timer_interrupt+0x5b/0x8a 
[ 3194.000446] [] ? notifier_call_chain+0x45/0x60 
[ 3194.000458] [] ? apic_timer_interrupt+0x31/0x38 
[ 3194.000471] [] ? console_unlock+0xdb/0xe0 
[ 3194.000485] [] ? intel_idle+0xb8/0x110 
[ 3194.000500] [] ? cpuidle_idle_call+0x7d/0x160 
[ 3194.000513] [] ? cpu_idle+0x8a/0xc0 
[ 3194.000525] [] ? setup_APIC_timer+0x69/0x6d 
[ 3194.000537] [] ? start_secondary+0xd5/0xdc 
[ 3194.000548] ---[ end trace a6d080bdbac9907f ]--- 
[ 3194.025292] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X 
[ 3194.025455] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> 
[ 3249.908131] usb 1-3: new high speed USB device using ehci_hcd and address 3 
[ 3250.436084] usb 1-3: device not accepting address 3, error -71 
[ 3250.548089] usb 1-3: new high speed USB device using ehci_hcd and address 4 
[ 3251.061869] usbcore: registered new interface driver uas 
[ 3251.086582] Initializing USB Mass Storage driver... 
[ 3251.087012] scsi4 : usb-storage 1-3:1.0 
[ 3251.089300] usbcore: registered new interface driver usb-storage 
[ 3251.089310] USB Mass Storage support registered. 
[ 3252.085950] scsi 4:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2 
[ 3252.088865] sd 4:0:0:0: Attached scsi generic sg1 type 0 
[ 3252.091460] sd 4:0:0:0: [sdb] 3987456 512-byte logical blocks: (2.04 GB/1.90 GiB) 
[ 3252.092787] sd 4:0:0:0: [sdb] Write Protect is off 
[ 3252.092806] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 
[ 3252.093790] sd 4:0:0:0: [sdb] No Caching mode page present 
[ 3252.093804] sd 4:0:0:0: [sdb] Assuming drive cache: write through 
[ 3252.099522] sd 4:0:0:0: [sdb] No Caching mode page present 
[ 3252.099535] sd 4:0:0:0: [sdb] Assuming drive cache: write through 
[ 3252.177695] sdb: sdb1 
[ 3252.180643] sd 4:0:0:0: [sdb] No Caching mode page present 
[ 3252.180653] sd 4:0:0:0: [sdb] Assuming drive cache: write through 
[ 3252.180661] sd 4:0:0:0: [sdb] Attached SCSI removable disk 
root@mnetbook:~#