Nowe posty

Autor Wątek: system sie wylacza  (Przeczytany 4382 razy)

sanczespanczes

  • Gość
system sie wylacza
« dnia: 2010-01-29, 22:02:55 »
witam mam taki problem jesli zaczne ogladac jakis film w przegladarce  po nie calej min zamyka mi sie system

lukaszn

  • Gość
system sie wylacza
« Odpowiedź #1 dnia: 2010-01-29, 22:13:39 »
Może trochę więcej szczegółów ?
Np.:
- Czy dzieje się tak w każdej z przeglądarek ?
- Jakiej wersji flash playera używasz ?
- Jakiego Linuksa ?
- Czy wcześniej pojawiał się taki problem ?

Na resztę przydatnych rzeczy, które mogą naprowadzić nas na rozwiązanie problemu wpadnij sam.

sanczespanczes

  • Gość
system sie wylacza
« Odpowiedź #2 dnia: 2010-01-29, 22:16:46 »
uzywam ubuntu 9.10 srodowisko gnomeflash playera 10 zauwazylem ze w kazdej przegladarce mi sie tak dzieje a uzywam chrome wczeniej nie ogladalem filmow wiec nie powiem czy wystepowal taki problem

ra-v

  • Gość
system sie wylacza
« Odpowiedź #3 dnia: 2010-01-30, 00:56:36 »
Poszukaj w menu Dzienników systemowych albo wpisz w konsole po restarcie kompa
tailf -n 500 /var/log/messages
i tam szukaj błędów.

sanczespanczes

  • Gość
system sie wylacza
« Odpowiedź #4 dnia: 2010-01-30, 09:38:54 »
Jan 30 09:34:01 brzoza-laptop kernel: [    0.972432] ahci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Jan 30 09:34:01 brzoza-laptop kernel: [    0.988032] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
Jan 30 09:34:01 brzoza-laptop kernel: [    0.988036] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
Jan 30 09:34:01 brzoza-laptop kernel: [    0.988151] scsi3 : ahci
Jan 30 09:34:01 brzoza-laptop kernel: [    0.988199] ata4: SATA max UDMA/133 abar m8192@0xfe1fe000 port 0xfe1fe100 irq 18
Jan 30 09:34:01 brzoza-laptop kernel: [    0.988265] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Jan 30 09:34:01 brzoza-laptop kernel: [    0.988368] scsi4 : ata_piix
Jan 30 09:34:01 brzoza-laptop kernel: [    0.988433] scsi5 : ata_piix
Jan 30 09:34:01 brzoza-laptop kernel: [    0.989121] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
Jan 30 09:34:01 brzoza-laptop kernel: [    0.989124] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
Jan 30 09:34:01 brzoza-laptop kernel: [    0.990150] Fixed MDIO Bus: probed
Jan 30 09:34:01 brzoza-laptop kernel: [    0.990186] PPP generic driver version 2.4.2
Jan 30 09:34:01 brzoza-laptop kernel: [    0.990288] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 30 09:34:01 brzoza-laptop kernel: [    0.990306] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Jan 30 09:34:01 brzoza-laptop kernel: [    0.990322] ehci_hcd 0000:00:1a.7: EHCI Host Controller
Jan 30 09:34:01 brzoza-laptop kernel: [    0.990376] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Jan 30 09:34:01 brzoza-laptop kernel: [    0.994287] ehci_hcd 0000:00:1a.7: debug port 1
Jan 30 09:34:01 brzoza-laptop kernel: [    0.994300] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebff400
Jan 30 09:34:01 brzoza-laptop kernel: [    1.008013] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Jan 30 09:34:01 brzoza-laptop kernel: [    1.008092] usb usb1: configuration #1 chosen from 1 choice
Jan 30 09:34:01 brzoza-laptop kernel: [    1.008123] hub 1-0:1.0: USB hub found
Jan 30 09:34:01 brzoza-laptop kernel: [    1.008131] hub 1-0:1.0: 4 ports detected
Jan 30 09:34:01 brzoza-laptop kernel: [    1.008199] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Jan 30 09:34:01 brzoza-laptop kernel: [    1.008213] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jan 30 09:34:01 brzoza-laptop kernel: [    1.008245] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Jan 30 09:34:01 brzoza-laptop kernel: [    1.012143] ehci_hcd 0000:00:1d.7: debug port 1
Jan 30 09:34:01 brzoza-laptop kernel: [    1.012165] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff000
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028084] usb usb2: configuration #1 chosen from 1 choice
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028115] hub 2-0:1.0: USB hub found
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028122] hub 2-0:1.0: 6 ports detected
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028184] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028204] uhci_hcd: USB Universal Host Controller Interface driver
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028227] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028237] uhci_hcd 0000:00:1a.0: UHCI Host Controller
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028268] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028298] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e080
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028379] usb usb3: configuration #1 chosen from 1 choice
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028408] hub 3-0:1.0: USB hub found
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028415] hub 3-0:1.0: 2 ports detected
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028471] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028481] uhci_hcd 0000:00:1a.1: UHCI Host Controller
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028512] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028542] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e000
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028622] usb usb4: configuration #1 chosen from 1 choice
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028651] hub 4-0:1.0: USB hub found
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028658] hub 4-0:1.0: 2 ports detected
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028707] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028717] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028754] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028777] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000dc00
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028864] usb usb5: configuration #1 chosen from 1 choice
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028893] hub 5-0:1.0: USB hub found
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028900] hub 5-0:1.0: 2 ports detected
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028946] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028956] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jan 30 09:34:01 brzoza-laptop kernel: [    1.028989] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
Jan 30 09:34:01 brzoza-laptop kernel: [    1.029019] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880
Jan 30 09:34:01 brzoza-laptop kernel: [    1.029104] usb usb6: configuration #1 chosen from 1 choice
Jan 30 09:34:01 brzoza-laptop kernel: [    1.029131] hub 6-0:1.0: USB hub found
Jan 30 09:34:01 brzoza-laptop kernel: [    1.029138] hub 6-0:1.0: 2 ports detected
Jan 30 09:34:01 brzoza-laptop kernel: [    1.029183] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Jan 30 09:34:01 brzoza-laptop kernel: [    1.029193] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jan 30 09:34:01 brzoza-laptop kernel: [    1.029226] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
Jan 30 09:34:01 brzoza-laptop kernel: [    1.029249] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
Jan 30 09:34:01 brzoza-laptop kernel: [    1.029327] usb usb7: configuration #1 chosen from 1 choice
Jan 30 09:34:01 brzoza-laptop kernel: [    1.029355] hub 7-0:1.0: USB hub found
Jan 30 09:34:01 brzoza-laptop kernel: [    1.029361] hub 7-0:1.0: 2 ports detected
Jan 30 09:34:01 brzoza-laptop kernel: [    1.029470] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Jan 30 09:34:01 brzoza-laptop kernel: [    1.031984] i8042.c: Detected active multiplexing controller, rev 1.1.
Jan 30 09:34:01 brzoza-laptop kernel: [    1.032634] serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 30 09:34:01 brzoza-laptop kernel: [    1.032640] serio: i8042 AUX0 port at 0x60,0x64 irq 12
Jan 30 09:34:01 brzoza-laptop kernel: [    1.032644] serio: i8042 AUX1 port at 0x60,0x64 irq 12
Jan 30 09:34:01 brzoza-laptop kernel: [    1.032647] serio: i8042 AUX2 port at 0x60,0x64 irq 12
Jan 30 09:34:01 brzoza-laptop kernel: [    1.032650] serio: i8042 AUX3 port at 0x60,0x64 irq 12
Jan 30 09:34:01 brzoza-laptop kernel: [    1.032708] mice: PS/2 mouse device common for all mice
Jan 30 09:34:01 brzoza-laptop kernel: [    1.032840] rtc_cmos 00:03: RTC can wake from S4
Jan 30 09:34:01 brzoza-laptop kernel: [    1.032872] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Jan 30 09:34:01 brzoza-laptop kernel: [    1.032897] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Jan 30 09:34:01 brzoza-laptop kernel: [    1.033005] device-mapper: uevent: version 1.0.3
Jan 30 09:34:01 brzoza-laptop kernel: [    1.033094] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Jan 30 09:34:01 brzoza-laptop kernel: [    1.033175] device-mapper: multipath: version 1.1.0 loaded
Jan 30 09:34:01 brzoza-laptop kernel: [    1.033178] device-mapper: multipath round-robin: version 1.0.0 loaded
Jan 30 09:34:01 brzoza-laptop kernel: [    1.033301] EISA: Probing bus 0 at eisa.0
Jan 30 09:34:01 brzoza-laptop kernel: [    1.033328] Cannot allocate resource for EISA slot 8
Jan 30 09:34:01 brzoza-laptop kernel: [    1.033330] EISA: Detected 0 cards.
Jan 30 09:34:01 brzoza-laptop kernel: [    1.033482] cpuidle: using governor ladder
Jan 30 09:34:01 brzoza-laptop kernel: [    1.033583] cpuidle: using governor menu
Jan 30 09:34:01 brzoza-laptop kernel: [    1.034111] TCP cubic registered
Jan 30 09:34:01 brzoza-laptop kernel: [    1.034277] NET: Registered protocol family 10
Jan 30 09:34:01 brzoza-laptop kernel: [    1.034768] lo: Disabled Privacy Extensions
Jan 30 09:34:01 brzoza-laptop kernel: [    1.035135] NET: Registered protocol family 17
Jan 30 09:34:01 brzoza-laptop kernel: [    1.035153] Bluetooth: L2CAP ver 2.13
Jan 30 09:34:01 brzoza-laptop kernel: [    1.035155] Bluetooth: L2CAP socket layer initialized
Jan 30 09:34:01 brzoza-laptop kernel: [    1.035158] Bluetooth: SCO (Voice Link) ver 0.6
Jan 30 09:34:01 brzoza-laptop kernel: [    1.035159] Bluetooth: SCO socket layer initialized
Jan 30 09:34:01 brzoza-laptop kernel: [    1.035196] Bluetooth: RFCOMM TTY layer initialized
Jan 30 09:34:01 brzoza-laptop kernel: [    1.035200] Bluetooth: RFCOMM socket layer initialized
Jan 30 09:34:01 brzoza-laptop kernel: [    1.035202] Bluetooth: RFCOMM ver 1.11
Jan 30 09:34:01 brzoza-laptop kernel: [    1.036083] Using IPI No-Shortcut mode
Jan 30 09:34:01 brzoza-laptop kernel: [    1.036158] registered taskstats version 1
Jan 30 09:34:01 brzoza-laptop kernel: [    1.036303]   Magic number: 10:206:577
Jan 30 09:34:01 brzoza-laptop kernel: [    1.036388] rtc_cmos 00:03: setting system clock to 2010-01-30 09:33:41 UTC (1264844021)
Jan 30 09:34:01 brzoza-laptop kernel: [    1.036391] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Jan 30 09:34:01 brzoza-laptop kernel: [    1.036393] EDD information not available.
Jan 30 09:34:01 brzoza-laptop kernel: [    1.065724] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Jan 30 09:34:01 brzoza-laptop kernel: [    1.160451] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T40N, JR03, max UDMA/33
Jan 30 09:34:01 brzoza-laptop kernel: [    1.176375] ata5.00: configured for UDMA/33
Jan 30 09:34:01 brzoza-laptop kernel: [    1.292136] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 30 09:34:01 brzoza-laptop kernel: [    1.292160] ata2: SATA link down (SStatus 0 SControl 300)
Jan 30 09:34:01 brzoza-laptop kernel: [    1.292180] ata3: SATA link down (SStatus 0 SControl 300)
Jan 30 09:34:01 brzoza-laptop kernel: [    1.293469] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Jan 30 09:34:01 brzoza-laptop kernel: [    1.293532] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
Jan 30 09:34:01 brzoza-laptop kernel: [    1.293871] ata1.00: ATA-8: ST9250827AS, 3.AAA, max UDMA/133
Jan 30 09:34:01 brzoza-laptop kernel: [    1.293875] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Jan 30 09:34:01 brzoza-laptop kernel: [    1.294911] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Jan 30 09:34:01 brzoza-laptop kernel: [    1.294973] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
Jan 30 09:34:01 brzoza-laptop kernel: [    1.295332] ata1.00: configured for UDMA/133
Jan 30 09:34:01 brzoza-laptop kernel: [    1.308335] scsi 0:0:0:0: Direct-Access     ATA      ST9250827AS      3.AA PQ: 0 ANSI: 5
Jan 30 09:34:01 brzoza-laptop kernel: [    1.308477] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 30 09:34:01 brzoza-laptop kernel: [    1.308518] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
Jan 30 09:34:01 brzoza-laptop kernel: [    1.308567] sd 0:0:0:0: [sda] Write Protect is off
Jan 30 09:34:01 brzoza-laptop kernel: [    1.308596] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 30 09:34:01 brzoza-laptop kernel: [    1.308731]  sda:
Jan 30 09:34:01 brzoza-laptop kernel: [    1.308778] ata4: SATA link down (SStatus 0 SControl 300)
Jan 30 09:34:01 brzoza-laptop kernel: [    1.320034] usb 1-2: new high speed USB device using ehci_hcd and address 2
Jan 30 09:34:01 brzoza-laptop kernel: [    1.328611] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T40N  JR03 PQ: 0 ANSI: 5
Jan 30 09:34:01 brzoza-laptop kernel: [    1.339825] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Jan 30 09:34:01 brzoza-laptop kernel: [    1.339829] Uniform CD-ROM driver Revision: 3.20
Jan 30 09:34:01 brzoza-laptop kernel: [    1.339951] sr 4:0:0:0: Attached scsi generic sg1 type 5
Jan 30 09:34:01 brzoza-laptop kernel: [    1.352347]  sda1 sda2 sda3 sda4 < sda5 sda6 >
Jan 30 09:34:01 brzoza-laptop kernel: [    1.382066] sd 0:0:0:0: [sda] Attached SCSI disk
Jan 30 09:34:01 brzoza-laptop kernel: [    1.382095] Freeing unused kernel memory: 540k freed
Jan 30 09:34:01 brzoza-laptop kernel: [    1.382468] Write protecting the kernel text: 4568k
Jan 30 09:34:01 brzoza-laptop kernel: [    1.382527] Write protecting the kernel read-only data: 1836k
Jan 30 09:34:01 brzoza-laptop kernel: [    1.463959] usb 1-2: configuration #1 chosen from 1 choice
Jan 30 09:34:01 brzoza-laptop kernel: [    1.504015] Clocksource tsc unstable (delta = -253144271 ns)
Jan 30 09:34:01 brzoza-laptop kernel: [    1.510917] Linux agpgart interface v0.103
Jan 30 09:34:01 brzoza-laptop kernel: [    1.596462] acpi device:20: registered as cooling_device2
Jan 30 09:34:01 brzoza-laptop kernel: [    1.596614] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1b/device:1c/input/input5
Jan 30 09:34:01 brzoza-laptop kernel: [    1.596659] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
Jan 30 09:34:01 brzoza-laptop kernel: [    1.610364] atl1 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan 30 09:34:01 brzoza-laptop kernel: [    1.610401] atl1 0000:02:00.0: version 2.1.3
Jan 30 09:34:01 brzoza-laptop kernel: [    1.615544] ohci1394 0000:09:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan 30 09:34:01 brzoza-laptop kernel: [    1.674687] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[feaff800-feafffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
Jan 30 09:34:01 brzoza-laptop kernel: [    1.924042] usb 7-1: new full speed USB device using uhci_hcd and address 2
Jan 30 09:34:01 brzoza-laptop kernel: [    2.166379] usb 7-1: configuration #1 chosen from 1 choice
Jan 30 09:34:01 brzoza-laptop kernel: [    2.416027] usb 7-2: new full speed USB device using uhci_hcd and address 3
Jan 30 09:34:01 brzoza-laptop kernel: [    2.577387] usb 7-2: configuration #1 chosen from 1 choice
Jan 30 09:34:01 brzoza-laptop kernel: [    2.683562] PM: Starting manual resume from disk
Jan 30 09:34:01 brzoza-laptop kernel: [    2.723864] kjournald starting.  Commit interval 5 seconds
Jan 30 09:34:01 brzoza-laptop kernel: [    2.723886] EXT3-fs: mounted filesystem with writeback data mode.
Jan 30 09:34:01 brzoza-laptop kernel: [    3.495311] type=1505 audit(1264844023.955:2): operation="profile_load" pid=452 name=/usr/share/gdm/guest-session/Xsession
Jan 30 09:34:01 brzoza-laptop kernel: [    3.510900] type=1505 audit(1264844023.971:3): operation="profile_load" pid=453 name=/sbin/dhclient3
Jan 30 09:34:01 brzoza-laptop kernel: [    3.511698] type=1505 audit(1264844023.971:4): operation="profile_load" pid=453 name=/usr/lib/NetworkManager/nm-dhcp-client.action
Jan 30 09:34:01 brzoza-laptop kernel: [    3.512149] type=1505 audit(1264844023.975:5): operation="profile_load" pid=453 name=/usr/lib/connman/scripts/dhclient-script
Jan 30 09:34:01 brzoza-laptop kernel: [    3.539226] type=1505 audit(1264844023.999:6): operation="profile_load" pid=454 name=/usr/bin/evince
Jan 30 09:34:01 brzoza-laptop kernel: [    3.552094] type=1505 audit(1264844024.015:7): operation="profile_load" pid=454 name=/usr/bin/evince-previewer
Jan 30 09:34:01 brzoza-laptop kernel: [    3.559648] type=1505 audit(1264844024.019:8): operation="profile_load" pid=454 name=/usr/bin/evince-thumbnailer
Jan 30 09:34:01 brzoza-laptop kernel: [    3.599235] type=1505 audit(1264844024.060:9): operation="profile_load" pid=457 name=/usr/lib/cups/backend/cups-pdf
Jan 30 09:34:01 brzoza-laptop kernel: [   19.804559] udev: starting version 147
Jan 30 09:34:01 brzoza-laptop kernel: [   19.813690] Adding 3100504k swap on /dev/sda6.  Priority:-1 extents:1 across:3100504k
Jan 30 09:34:01 brzoza-laptop kernel: [   19.845575] lp: driver loaded but no devices found
Jan 30 09:34:01 brzoza-laptop kernel: [   19.878528] asus_laptop: Asus Laptop Support version 0.42
Jan 30 09:34:01 brzoza-laptop kernel: [   19.890947] asus_laptop:   M51SE model detected
Jan 30 09:34:01 brzoza-laptop kernel: [   19.891764] input: Asus Laptop extra buttons as /devices/virtual/input/input6
Jan 30 09:34:01 brzoza-laptop kernel: [   19.891879] Registered led device: asus::mail
Jan 30 09:34:01 brzoza-laptop kernel: [   19.905758] asus_laptop: Brightness ignored, must be controlled by ACPI video driver
Jan 30 09:34:01 brzoza-laptop kernel: [   19.911119] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Jan 30 09:34:01 brzoza-laptop kernel: [   19.911126] Disabling lock debugging due to kernel taint
Jan 30 09:34:01 brzoza-laptop kernel: [   19.944713] EXT3 FS on sda5, internal journal
Jan 30 09:34:01 brzoza-laptop kernel: [   20.018646] [fglrx] Maximum main memory to use for locked dma buffers: 1886 MBytes.
Jan 30 09:34:01 brzoza-laptop kernel: [   20.019085] [fglrx]   vendor: 1002 device: 95c4 count: 1
Jan 30 09:34:01 brzoza-laptop kernel: [   20.019751] [fglrx] ioport: bar 1, base 0xa000, size: 0x100
Jan 30 09:34:01 brzoza-laptop kernel: [   20.019769] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan 30 09:34:01 brzoza-laptop kernel: [   20.020044] [fglrx] Kernel PAT support is enabled
Jan 30 09:34:01 brzoza-laptop kernel: [   20.020069] [fglrx] module loaded - fglrx 8.66.10 [Sep  3 2009] with 1 minors
Jan 30 09:34:01 brzoza-laptop kernel: [   20.036891] ricoh-mmc: Ricoh MMC Controller disabling driver
Jan 30 09:34:01 brzoza-laptop kernel: [   20.036894] ricoh-mmc: Copyright(c) Philip Langdale
Jan 30 09:34:01 brzoza-laptop kernel: [   20.036931] ricoh-mmc: Ricoh MMC controller found at 0000:09:01.2 [1180:0843] (rev 12)
Jan 30 09:34:01 brzoza-laptop kernel: [   20.036950] ricoh-mmc: Controller is now disabled.
Jan 30 09:34:01 brzoza-laptop kernel: [   20.040915] Bluetooth: Generic Bluetooth USB driver ver 0.5
Jan 30 09:34:01 brzoza-laptop kernel: [   20.041037] usbcore: registered new interface driver btusb
Jan 30 09:34:01 brzoza-laptop kernel: [   20.049529] sdhci: Secure Digital Host Controller Interface driver
Jan 30 09:34:01 brzoza-laptop kernel: [   20.049533] sdhci: Copyright(c) Pierre Ossman
Jan 30 09:34:01 brzoza-laptop kernel: [   20.050922] sdhci-pci 0000:09:01.1: SDHCI controller found [1180:0822] (rev 22)
Jan 30 09:34:01 brzoza-laptop kernel: [   20.050940] sdhci-pci 0000:09:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Jan 30 09:34:01 brzoza-laptop kernel: [   20.053001] Registered led device: mmc0::
Jan 30 09:34:01 brzoza-laptop kernel: [   20.054034] mmc0: SDHCI controller on PCI [0000:09:01.1] using PIO
Jan 30 09:34:01 brzoza-laptop kernel: [   20.072964] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 30 09:34:01 brzoza-laptop kernel: [   20.085498] Linux video capture interface: v2.00
Jan 30 09:34:01 brzoza-laptop kernel: [   20.088667] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (174f:5a31)
Jan 30 09:34:01 brzoza-laptop kernel: [   20.113829] cfg80211: Calling CRDA to update world regulatory domain
Jan 30 09:34:01 brzoza-laptop kernel: [   20.127276] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input7
Jan 30 09:34:01 brzoza-laptop kernel: [   20.127333] usbcore: registered new interface driver uvcvideo
Jan 30 09:34:01 brzoza-laptop kernel: [   20.127337] USB Video Class driver (v0.1.0)
Jan 30 09:34:01 brzoza-laptop kernel: [   20.164495] cfg80211: World regulatory domain updated:
Jan 30 09:34:01 brzoza-laptop kernel: [   20.164499] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 30 09:34:01 brzoza-laptop kernel: [   20.164502] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 30 09:34:01 brzoza-laptop kernel: [   20.164505] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 30 09:34:01 brzoza-laptop kernel: [   20.164508] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 30 09:34:01 brzoza-laptop kernel: [   20.164511] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 30 09:34:01 brzoza-laptop kernel: [   20.164514] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 30 09:34:01 brzoza-laptop kernel: [   20.168073] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
Jan 30 09:34:01 brzoza-laptop kernel: [   20.168076] iwlagn: Copyright(c) 2003-2009 Intel Corporation
Jan 30 09:34:01 brzoza-laptop kernel: [   20.168170] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Jan 30 09:34:01 brzoza-laptop kernel: [   20.168223] iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
Jan 30 09:34:01 brzoza-laptop kernel: [   20.221951] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
Jan 30 09:34:01 brzoza-laptop kernel: [   20.261824] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Jan 30 09:34:01 brzoza-laptop kernel: [   20.336599] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
Jan 30 09:34:01 brzoza-laptop kernel: [   20.810676] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000
Jan 30 09:34:01 brzoza-laptop kernel: [   20.851039] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
Jan 30 09:34:01 brzoza-laptop kernel: [   21.008565] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 30 09:34:01 brzoza-laptop kernel: [   21.024347] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode
Jan 30 09:34:01 brzoza-laptop kernel: [   21.096535] iwlagn 0000:03:00.0: loaded firmware version 228.61.2.24
Jan 30 09:34:01 brzoza-laptop kernel: [   21.112733] __ratelimit: 6 callbacks suppressed
Jan 30 09:34:01 brzoza-laptop kernel: [   21.112736] type=1505 audit(1264840441.575:12): operation="profile_replace" pid=1065 name=/usr/share/gdm/guest-session/Xsession
Jan 30 09:34:01 brzoza-laptop kernel: [   21.114721] type=1505 audit(1264840441.575:13): operation="profile_replace" pid=1066 name=/sbin/dhclient3
Jan 30 09:34:01 brzoza-laptop kernel: [   21.115523] type=1505 audit(1264840441.575:14): operation="profile_replace" pid=1066 name=/usr/lib/NetworkManager/nm-dhcp-client.action
Jan 30 09:34:01 brzoza-laptop kernel: [   21.115958] type=1505 audit(1264840441.575:15): operation="profile_replace" pid=1066 name=/usr/lib/connman/scripts/dhclient-script
Jan 30 09:34:01 brzoza-laptop kernel: [   21.120188] type=1505 audit(1264840441.583:16): operation="profile_replace" pid=1067 name=/usr/bin/evince
Jan 30 09:34:01 brzoza-laptop kernel: [   21.133397] type=1505 audit(1264840441.595:17): operation="profile_replace" pid=1067 name=/usr/bin/evince-previewer
Jan 30 09:34:01 brzoza-laptop kernel: [   21.140978] type=1505 audit(1264840441.603:18): operation="profile_replace" pid=1067 name=/usr/bin/evince-thumbnailer
Jan 30 09:34:01 brzoza-laptop kernel: [   21.153386] type=1505 audit(1264840441.615:19): operation="profile_replace" pid=1070 name=/usr/lib/cups/backend/cups-pdf
Jan 30 09:34:01 brzoza-laptop kernel: [   21.154367] type=1505 audit(1264840441.615:20): operation="profile_replace" pid=1070 name=/usr/sbin/cupsd
Jan 30 09:34:01 brzoza-laptop kernel: [   21.157291] type=1505 audit(1264840441.619:21): operation="profile_replace" pid=1071 name=/usr/sbin/tcpdump
Jan 30 09:34:01 brzoza-laptop kernel: [   21.315780] Registered led device: iwl-phy0::radio
Jan 30 09:34:01 brzoza-laptop kernel: [   21.315801] Registered led device: iwl-phy0::assoc
Jan 30 09:34:01 brzoza-laptop kernel: [   21.315820] Registered led device: iwl-phy0::RX
Jan 30 09:34:01 brzoza-laptop kernel: [   21.315839] Registered led device: iwl-phy0::TX
Jan 30 09:34:01 brzoza-laptop kernel: [   21.386686] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 30 09:34:02 brzoza-laptop kernel: [   22.000279] [fglrx] Firegl kernel thread PID: 1370
Jan 30 09:34:02 brzoza-laptop kernel: [   22.031902] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Jan 30 09:34:02 brzoza-laptop kernel: [   22.031905] Bluetooth: BNEP filters: protocol multicast
Jan 30 09:34:02 brzoza-laptop kernel: [   22.039356] Bridge firewalling registered
Jan 30 09:34:02 brzoza-laptop kernel: [   22.237493] ppdev: user-space parallel port driver
Jan 30 09:34:03 brzoza-laptop kernel: [   22.591345] [fglrx] Gart USWC size:628 M.
Jan 30 09:34:03 brzoza-laptop kernel: [   22.591349] [fglrx] Gart cacheable size:247 M.
Jan 30 09:34:03 brzoza-laptop kernel: [   22.591354] [fglrx] Reserved FB block: Shared offset:0, size:1000000
Jan 30 09:34:03 brzoza-laptop kernel: [   22.591357] [fglrx] Reserved FB block: Unshared offset:fe03000, size:1f9000
Jan 30 09:34:03 brzoza-laptop kernel: [   22.591360] [fglrx] Reserved FB block: Unshared offset:fffc000, size:4000
Jan 30 09:34:35 brzoza-laptop kernel: [   55.100522] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jan 30 09:34:35 brzoza-laptop kernel: [   55.168252] cfg80211: Calling CRDA for country: NL
Jan 30 09:34:35 brzoza-laptop kernel: [   55.170634] cfg80211: Regulatory domain: NL
Jan 30 09:34:35 brzoza-laptop kernel: [   55.170636] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 30 09:34:35 brzoza-laptop kernel: [   55.170639] (2402000 KHz - 2494000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm)
Jan 30 09:34:35 brzoza-laptop kernel: [   55.170643] cfg80211: Regulatory domain: NL
Jan 30 09:34:35 brzoza-laptop kernel: [   55.170645] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 30 09:34:35 brzoza-laptop kernel: [   55.170647] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 30 09:34:35 brzoza-laptop kernel: [   55.170650] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 30 09:34:35 brzoza-laptop kernel: [   55.170652] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 30 09:34:35 brzoza-laptop kernel: [   55.170655] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan 30 09:34:35 brzoza-laptop kernel: [   55.170659] cfg80211: Regulatory domain: 98
Jan 30 09:34:35 brzoza-laptop kernel: [   55.170661] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 30 09:34:35 brzoza-laptop kernel: [   55.170663] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 30 09:34:35 brzoza-laptop kernel: [   55.170718] cfg80211: Current regulatory domain updated by AP to: NL
Jan 30 09:34:35 brzoza-laptop kernel: [   55.170721] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 30 09:34:35 brzoza-laptop kernel: [   55.170724] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 30 09:34:38 brzoza-laptop kernel: [   57.602240] padlock: VIA PadLock not detected.
Jan 30 09:34:44 brzoza-laptop kernel: [   64.093068] CE: hpet increasing min_delta_ns to 15000 nsec
Jan 30 09:35:04 brzoza-laptop kernel: [   83.637089] CE: hpet increasing min_delta_ns to 22500 nsec
--edit ZipoKing--
dodałem trochę BBCode'u

ra-v

  • Gość
system sie wylacza
« Odpowiedź #5 dnia: 2010-01-30, 22:11:34 »
Nic nie widać
cat /var/log/messages | grep -i "firefox|mozilla|flash|swf|acpi"
będzie bardziej jednoznaczne.

Może zainstaluj sterowniki dedykowane karcie graficznej, jeszcze raz Flash Playera i wyłącz (albo włącz) efekty pulpitu.

Filmy np. FLV, MPEG, DVD ci odtwarza? a np. program VLC swf-a (czyli plik flasha) odtworzy?