Linux.pl »

Baza sprzętu »
Rozdajemy Linuksa »
Poczta Linux.pl »
Hosting Linux.pl »

Nowe posty

xx Problem ze sterownikami. (5)
2024-04-13, 21:25:16
xx Instalacja xfce4 (2)
2024-04-13, 16:20:17
xx Serie kompilacji bez instalacji dla “emerge” w Gentoo (2)
2024-04-08, 18:40:04
xx Plasma 6 w Neonie ssie trochę mniej ... (17)
2024-04-05, 10:03:46
xx Problem z Linux Lite po instalacji (3)
2024-04-03, 14:23:40
xx Jak właczyć num locka przy starcie systemu debian 12? (12)
2024-04-02, 17:43:54
xx Brak dźwieku w systemie. (5)
2024-04-02, 16:13:41
xx Dystrybucja pod HP Omen (7)
2024-03-29, 11:33:05
xx [Poradnik] Wyszukiwanie Sterowników (2)
2024-03-27, 21:08:23
xx Ile pingwinów? (1)
2024-03-27, 08:59:24
« poprzedni następny »
Strony: [1]   Do dołu

Autor Wątek: Jak wymusic rozdzielczosc na LCD?  (Przeczytany 8035 razy)

Małolat

  • Gość
Jak wymusic rozdzielczosc na LCD?
« dnia: 2008-10-26, 16:39:54 »
Na w stepie przepraszam za brak ogonkow. Nie moge znalezc mapy klawiatury innej niz dvorak :(

Mam problem z rozdzielczoscia otoz spalila mi sie plyta glowna w Samsung SyncMaster 913v. Jest to 19 calowy LCD z natywna rozdzielczoscia 1280x1024@75Hz. Kupilem niestety plytke glowna ale do innego modelu Samsunga (prawdopodobnie 17 cali) i najwieksza rozdzielczosc to 1024x768@70Hz.

Czy moge jakos wymusic na Xach wieksza rozdzielczosc?

Wynik xrandr:

Kod: [Zaznacz]
Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 (normal left inverted right) 0mm x 0mm
   1024x768       75.0     70.0*    60.0  
   832x624        75.0  
   800x600        75.0     72.0     60.0     56.0  
   720x450        60.0  
   640x480        60.0     75.0     73.0  
   640x400        60.0  
   640x384        60.0  
   576x384        55.0  
   512x384        75.0     70.0     60.0  
   416x312        75.0  
   400x300        75.0     72.0     60.0     56.0  
   320x240        75.0     73.0     60.0
Plik xorg.conf

Kod: [Zaznacz]
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc104"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
EndSection

Section "ServerFlags"
	Option	"AllowMouseOpenFail"	"true"
EndSection

Section "Device"
	Identifier	"uPD72874 IEEE1394 OHCI 1.1 3-port PHY-Link Ctrlr"
	Driver      "nvidia"
	Option      "RenderAccel"	"1"
	Option      "AllowGLXWithComposite"	"1"
	Option      "RandRRotation"	"1"
	Option      "AddARGBGLXVisuals"	"1"
	Option      "DisableGLXRootClipping"	"1"
	Option      "TripleBuffer"	"1"
	Option      "UseEDID"	"1"
	Option      "UseEdidFreqs"	"1"
	Option      "DynamicTwinView"	"0"
#	Option      "ModeValidation"	"NoDFPNativeResolutionCheck"
#	Option      "UseDisplayDevice"	"DFP"
	Option      "IgnoreDisplayDevices"	"TV"
	Option      "Coolbits"	"1"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Option		"DPMS"
	HorizSync	30-81
	VertRefresh	56-75
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"uPD72874 IEEE1394 OHCI 1.1 3-port PHY-Link Ctrlr"
	Monitor		"Generic Monitor"
	DefaultDepth 24
	SubSection "Display"
		Modes		"1280x1024"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
EndSection


Section "Extensions"
	Option	"Composite"	"1"
#	Option	"RENDER"	"1"
EndSection
System to DreamLinux ale generalnie siedze na Ubuntu wiec poprosze o wskazowki celujace w ta dystrybucje. Pozdrawiam!
Zapisane

arctgx

  • Gość
Jak wymusic rozdzielczosc na LCD?
« Odpowiedź #1 dnia: 2008-10-27, 14:13:13 »
Pytanie: czy zakresy HorizSync i VertRefresh podawałeś ręcznie na podstawie specyfikacji technicznej monitora, czy też Xorg wziął sobie te dane z pamięci EDID monitora lub z domyślnych wartości?

Gdybyś podał loga Xorg, może byłbym w stanie na to pytanie odpowiedzieć sam.

http://forum.linux.pl/viewtopic.php?id=12538

P.S. Nie zwróciłem uwagi że wymieniałeś płytkę. Na informację z EDID nie ma co zatem liczyć i prawdopodobnie przyda Ci się te dane oraz być może tryby (Modeline), wprowadzić ręcznie (a potem jeszcze wykorzystać je w sekcji Screen). Zacznij więc od zakresów, które posiada Twoja 19-tka.
Zapisane

chmooreck

  • Gość
Jak wymusic rozdzielczosc na LCD?
« Odpowiedź #2 dnia: 2008-10-27, 17:39:28 »
A nie jest czasem tak, że elektronika i tak nie puści wyższego trybu pracy ? Przecież "myśli", że 1024x768 to maksymalna rozdzielczość obsługiwana przez matrycę...
Zapisane

Małolat

  • Gość
Jak wymusic rozdzielczosc na LCD?
« Odpowiedź #3 dnia: 2008-10-28, 21:47:31 »
Witam! Sory za brak aktywności. Nie miałem kiedy wpaść i napisać. Siedzę teraz na ubuntu 8.10 RC. Zrobiłem eksperyment i usunąłem (przeniosłem gdzieś indziej) pliczek xorg.conf i... wszystko działa. X'y nie zwróciły żadnego komunikatu o błędzie. Wszystko działa jak wcześniej.

Standardowa zawartość xorg.conf w ubuntu:
Kod: [Zaznacz]
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Device"
	Identifier	"Configured Video Device"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	Device		"Configured Video Device"
EndSection
@chmooreck
Na windowsie próbowałem i wystarczyło tylko zmienić sterownik monitora na właściwy. Rozdzielczość wtedy była ok i wszystko śmigało jak powinno, więc elektronika raczej nie blokuje softwaru. To raczej software nie chce uwierzyć mi na słowo :(



ps jeśli usunę xorg.conf, jak wspomniałem, to włącza sie sterownik vesy. Po modyfikacji xorg.conf:

Kod: [Zaznacz]
Section "Device"
	Identifier	"Configured Video Device"
	Driver      "nv"
EndSection

Section "Monitor"
    Identifier    "Generic Monitor"
    Option        "DPMS"
    HorizSync    30-81
    VertRefresh    56-75
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Device		"Configured Video Device"
    Monitor        "Generic Monitor"
    DefaultDepth 24
    SubSection "Display"
        Modes        "1280x1024"
    EndSubSection
EndSection
problem nadal nie ustaje



Oto log xorga:

Kod: [Zaznacz]
X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-19-server i686 Ubuntu
Current Operating System: Linux michal-desktop 2.6.27-7-generic #1 SMP Fri Oct 24 06:42:44 UTC 2008 i686
Build Date: 24 October 2008  08:00:16AM
xorg-server 2:1.5.2-2ubuntu3 (buildd@rothera.buildd) 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 28 21:55:17 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Generic Monitor"
(**) |   |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified.  Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d9a40
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 4.1
	X.Org XInput driver : 2.1
	X.Org Server Extension : 1.1
	X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@1:0:0) nVidia Corporation NV43 [GeForce 6600] rev 162, Mem @ 0xe0000000/0, 0xd0000000/0, 0xe1000000/0, BIOS @ 0x????????/131072
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[b]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"

(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.5.2, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"

(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nv"

(II) Loading /usr/lib/xorg/modules/drivers//nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
	compiled for 1.5.0, module version = 2.1.10
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 4.1
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
	Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
	Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
	GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
	GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
	Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
	GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
	GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
	GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
	GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
	GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
	GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
	Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
	GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
	GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
	GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
	Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
	GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
	Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
	GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
	GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
	GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
	GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
	GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
	GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
	Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
	GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
	GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
	GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
	GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
	GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
	Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
	GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
	GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
	GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
	GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
	Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
	GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
	GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
	GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
	Quadro FX 540, GeForce 6200, GeForce 6500,
	GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
	GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
	GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 6800,
	GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT, GeForce 6200,
	GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
	GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
	GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
	GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
	GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
	GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
	GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
	GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
	Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
	GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
	GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
	Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
	Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
	GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS,
	GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
	GeForce 8600 GT, GeForce 8600 GT, GeForce 8400 GS, GeForce 9500M GS,
	GeForce 8600M GT, GeForce 9650M GS, GeForce 8700M GT, Quadro FX 370,
	Quadro NVS 320M, Quadro FX 570M, Quadro FX 1600M, Quadro FX 570,
	Quadro FX 1700, GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS,
	GeForce 8300 GS, GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
	GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
	Quadro NVS 135M, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290,
	GeForce GTX 280, GeForce GTX 260, GeForce 8800 GTS 512,
	GeForce 8800 GT, GeForce 9800 GX2, GeForce 8800 GS,
	GeForce 8800M GTS, GeForce 8800M GTX, GeForce 8800 GS,
	GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX, Quadro FX 3700,
	Quadro FX 3600M, GeForce 9600 GT, GeForce 9600M GT, GeForce 9600M GS,
	GeForce 9600M GT, GeForce 9500M G, GeForce 8400 GS, GeForce 9300M GS,
	GeForce 9200M GS, GeForce 9300M GS
(II) Primary Device is: PCI 01@00:00:0
(--) NV: Found NVIDIA GeForce 6600 at 01@00:00:0
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[b]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 4.1
(II) NV(0): Initializing int10
(WW) NV(0): Bad V_BIOS checksum
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "GeForce 6600"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"

(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 0.1.0
	ABI class: X.Org Video Driver, version 4.1
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xD0000000
(--) NV(0): MMIO registers at 0xE0000000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for analog device on output A...
(--) NV(0):   ...found one
(II) NV(0): Probing for analog device on output B...
(--) NV(0):   ...can't find one
(II) NV(0): Probing for EDID on I2C bus A...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0):   ... none found
(II) NV(0): Probing for EDID on I2C bus B...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(--) NV(0): DDC detected a CRT:
(II) NV(0): Manufacturer: SAM  Model: 6056  Serial#: 0
(II) NV(0): Year: 1998  Week: 15
(II) NV(0): EDID Version: 1.1
(II) NV(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) NV(0): Sync:  Separate  Composite  SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
(II) NV(0): Max Image Size [cm]: horiz.: 30  vert.: 23
(II) NV(0): Gamma: 1.97
(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) NV(0): redX: 0.619 redY: 0.343   greenX: 0.298 greenY: 0.595
(II) NV(0): blueX: 0.146 blueY: 0.104   whiteX: 0.294 whiteY: 0.325
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@67Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported Future Video Modes:
(II) NV(0): #0: hsize: 640  vsize 480  refresh: 75  vid: 20273
(II) NV(0): #1: hsize: 800  vsize 600  refresh: 75  vid: 20293
(II) NV(0): #2: hsize: 1024  vsize 768  refresh: 75  vid: 20321
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 31.5 MHz   Image Size:  304 x 228 mm
(II) NV(0): h_active: 640  h_sync: 656  h_sync_end 720 h_blank_end 840 h_border: 0
(II) NV(0): v_active: 480  v_sync: 481  v_sync_end 484 v_blanking: 500 v_border: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 49.5 MHz   Image Size:  304 x 228 mm
(II) NV(0): h_active: 800  h_sync: 816  h_sync_end 896 h_blank_end 1056 h_border: 0
(II) NV(0): v_active: 600  v_sync: 601  v_sync_end 604 v_blanking: 625 v_border: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 78.8 MHz   Image Size:  304 x 228 mm
(II) NV(0): h_active: 1024  h_sync: 1040  h_sync_end 1136 h_blank_end 1312 h_border: 0
(II) NV(0): v_active: 768  v_sync: 769  v_sync_end 772 v_blanking: 800 v_border: 0
(II) NV(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 61 kHz, PixClock max 80 MHz
(II) NV(0): EDID (in hex):
(II) NV(0): 	00ffffffffffff004c2d566000000000
(II) NV(0): 	0f0801010f1e1761e8b5a59e574c9825
(II) NV(0): 	1a4b53b76e00314f454f614f01010101
(II) NV(0): 	0101010101014e0c80c820e014101040
(II) NV(0): 	130030e4100000185613200031581920
(II) NV(0): 	1050130030e41000001ec31e00204100
(II) NV(0): 	20301060130030e41000001e000000fd
(II) NV(0): 	00324b1e3d08000a20202020202000cb
(--) NV(0): CRTC 0 appears to have a CRT attached
(II) NV(0): Using CRT on CRTC 0
(II) NV(0): EDID vendor "SAM", prod id 24662
(II) NV(0): Using hsync ranges from config file
(II) NV(0): Using vrefresh ranges from config file
(II) NV(0): Printing DDC gathered Modelines:
(II) NV(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NV(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NV(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NV(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NV(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NV(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NV(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NV(0): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NV(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NV(0): Modeline "1024x768"x0.0   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) NV(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NV(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NV(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NV(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NV(0): Modeline "640x480"x75.0   30.72  640 664 728 816  480 481 484 502 -hsync +vsync (37.7 kHz)
(II) NV(0): Modeline "800x600"x75.0   48.91  800 840 920 1040  600 601 604 627 -hsync +vsync (47.0 kHz)
(II) NV(0): Modeline "1024x768"x75.0   81.80  1024 1080 1192 1360  768 769 772 802 -hsync +vsync (60.2 kHz)
(--) NV(0): VideoRAM: 262144 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): Generic Monitor: Using hsync range of 30.00-81.00 kHz
(II) NV(0): Generic Monitor: Using vrefresh range of 56.00-75.00 Hz
(II) NV(0): Generic Monitor: Using maximum pixel clock of 80.00 MHz
(II) NV(0): Clock range:  12.00 to 400.00 MHz
(II) NV(0): Not using default mode "640x350" (vrefresh out of range)
(II) NV(0): Not using default mode "320x175" (vrefresh out of range)
(II) NV(0): Not using default mode "640x400" (vrefresh out of range)
(II) NV(0): Not using default mode "320x200" (vrefresh out of range)
(II) NV(0): Not using default mode "720x400" (vrefresh out of range)
(II) NV(0): Not using default mode "360x200" (vrefresh out of range)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (vrefresh out of range)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (vrefresh out of range)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (vrefresh out of range)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (vrefresh out of range)
(II) NV(0): Not using default mode "1152x864" (mode clock too high)
(II) NV(0): Not using default mode "1280x960" (mode clock too high)
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (mode clock too high)
(II) NV(0): Not using default mode "1280x1024" (mode clock too high)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (mode clock too high)
(II) NV(0): Not using default mode "800x600" (mode clock too high)
(II) NV(0): Not using default mode "1600x1200" (mode clock too high)
(II) NV(0): Not using default mode "800x600" (mode clock too high)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "1152x864" (mode clock too high)
(II) NV(0): Not using default mode "1152x864" (mode clock too high)
(II) NV(0): Not using default mode "1152x864" (mode clock too high)
(II) NV(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NV(0): Not using default mode "576x432" (vrefresh out of range)
(II) NV(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NV(0): Not using default mode "576x432" (vrefresh out of range)
(II) NV(0): Not using default mode "1152x864" (hsync out of range)
(II) NV(0): Not using default mode "576x432" (hsync out of range)
(II) NV(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) NV(0): Not using default mode "1360x768" (mode clock too high)
(II) NV(0): Not using default mode "1400x1050" (mode clock too high)
(II) NV(0): Not using default mode "1400x1050" (mode clock too high)
(II) NV(0): Not using default mode "1400x1050" (mode clock too high)
(II) NV(0): Not using default mode "1400x1050" (hsync out of range)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(II) NV(0): Not using default mode "1440x900" (mode clock too high)
(II) NV(0): Not using default mode "1600x1024" (mode clock too high)
(II) NV(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
(II) NV(0): Not using default mode "1680x1050" (mode clock too high)
(II) NV(0): Not using default mode "1680x1050" (mode clock too high)
(II) NV(0): Not using default mode "840x525" (mode clock too high)
(II) NV(0): Not using default mode "1680x1050" (hsync out of range)
(II) NV(0): Not using default mode "840x525" (hsync out of range)
(II) NV(0): Not using default mode "1680x1050" (hsync out of range)
(II) NV(0): Not using default mode "840x525" (hsync out of range)
(II) NV(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking)
(II) NV(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using driver mode "1024x768" (mode clock too high)
(II) NV(0): Not using mode "1280x1024" (no mode of this name)
(--) NV(0): Virtual size is 1024x768 (pitch 1024)
(**) NV(0):  Driver mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) NV(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(**) NV(0):  Driver mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) NV(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(**) NV(0):  Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) NV(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(**) NV(0):  Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NV(0):  Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) NV(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(**) NV(0):  Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) NV(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(**) NV(0):  Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NV(0):  Driver mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) NV(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(**) NV(0):  Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) NV(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(**) NV(0):  Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) NV(0):  Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) NV(0):  Driver mode "800x600": 48.9 MHz, 47.0 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600"x75.0   48.91  800 840 920 1040  600 601 604 627 -hsync +vsync (47.0 kHz)
(**) NV(0):  Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NV(0):  Driver mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) NV(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) NV(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) NV(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(**) NV(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NV(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) NV(0):  Default mode "840x525": 73.1 MHz, 65.3 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "840x525"x60.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz)
(**) NV(0):  Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
(II) NV(0): Modeline "700x525"x74.8   77.90  700 732 892 956  525 526 532 545 doublescan +hsync +vsync (81.5 kHz)
(**) NV(0):  Default mode "700x525": 72.5 MHz, 76.5 kHz, 70.1 Hz (D)
(II) NV(0): Modeline "700x525"x70.1   72.53  700 748 824 948  525 525 527 546 doublescan -hsync +vsync (76.5 kHz)
(**) NV(0):  Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "700x525"x60.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz)
(**) NV(0):  Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "640x512"x75.0   67.50  640 648 720 844  512 512 514 533 doublescan +hsync +vsync (80.0 kHz)
(**) NV(0):  Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x512"x60.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz)
(**) NV(0):  Default mode "720x450": 53.2 MHz, 55.9 kHz, 59.9 Hz (D)
(II) NV(0): Modeline "720x450"x59.9   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz)
(**) NV(0):  Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) NV(0):  Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) NV(0):  Driver mode "640x480": 30.7 MHz, 37.7 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480"x75.0   30.72  640 664 728 816  480 481 484 502 -hsync +vsync (37.7 kHz)
(**) NV(0):  Driver mode "640x480": 30.2 MHz, 35.0 kHz, 66.7 Hz
(II) NV(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(**) NV(0):  Driver mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NV(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NV(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) NV(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) NV(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(**) NV(0):  Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x480"x60.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz)
(**) NV(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) NV(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NV(0):  Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
(II) NV(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(**) NV(0):  Default mode "680x384": 36.0 MHz, 47.4 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "680x384"x60.0   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz)
(**) NV(0):  Default mode "680x384": 42.4 MHz, 47.7 kHz, 59.8 Hz (D)
(II) NV(0): Modeline "680x384"x59.8   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz)
(**) NV(0):  Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "576x432"x75.0   54.00  576 608 672 800  432 432 434 450 doublescan +hsync +vsync (67.5 kHz)
(**) NV(0):  Default mode "576x432": 52.5 MHz, 67.6 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "576x432"x75.0   52.49  576 612 676 776  432 432 434 451 doublescan -hsync +vsync (67.6 kHz)
(**) NV(0):  Default mode "576x432": 48.4 MHz, 63.0 kHz, 70.0 Hz (D)
(II) NV(0): Modeline "576x432"x70.0   48.38  576 612 672 768  432 432 434 450 doublescan -hsync +vsync (63.0 kHz)
(**) NV(0):  Default mode "576x432": 40.8 MHz, 53.7 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "576x432"x60.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz)
(**) NV(0):  Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "512x384"x75.0   39.38  512 520 568 656  384 384 386 400 doublescan +hsync +vsync (60.0 kHz)
(**) NV(0):  Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) NV(0): Modeline "512x384"x70.1   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync (56.5 kHz)
(**) NV(0):  Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz)
(**) NV(0):  Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) NV(0): Modeline "416x312"x74.7   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync (49.7 kHz)
(**) NV(0):  Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "400x300"x75.1   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync (46.9 kHz)
(**) NV(0):  Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) NV(0): Modeline "400x300"x72.2   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync (48.1 kHz)
(**) NV(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) NV(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
(**) NV(0):  Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) NV(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz)
(**) NV(0):  Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "320x240"x75.0   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync (37.5 kHz)
(**) NV(0):  Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) NV(0): Modeline "320x240"x72.8   15.75  320 332 352 416  240 244 246 260 doublescan -hsync -vsync (37.9 kHz)
(**) NV(0):  Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz)
(**) NV(0): Display dimensions: (300, 230) mm
(**) NV(0): DPI set to (86, 84)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"

(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.2.0
	ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[b]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[b]
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Scanline Image Writes
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(**) Option "dpms"
(**) NV(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"

(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 2.0.99
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.1
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "pl"
(**) AT Translated Set 2 keyboard: xkb_layout: "pl"
(II) config/hal: Adding input device USB-compliant keyboard
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event3"
(II) USB-compliant keyboard: Found x and y relative axes
(II) USB-compliant keyboard: Found 4 mouse buttons
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as mouse
(II) USB-compliant keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) USB-compliant keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) USB-compliant keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "pl"
(**) USB-compliant keyboard: xkb_layout: "pl"
(**) USB-compliant keyboard: YAxisMapping: buttons 4 and 5
(**) USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device USB-compliant keyboard
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event2"
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) USB-compliant keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) USB-compliant keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "pl"
(**) USB-compliant keyboard: xkb_layout: "pl"
AUDIT: Tue Oct 28 21:55:24 2008: 4903 X: client 4 rejected from local host ( uid=0 gid=0 pid=5090 )
AUDIT: Tue Oct 28 21:55:33 2008: 4903 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=5097 )
AUDIT: Tue Oct 28 21:55:33 2008: 4903 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=5098 )
AUDIT: Tue Oct 28 21:55:33 2008: 4903 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=5099 )
Zdążyłem zauważyć że interesująca mnie rozdzielczość jest zdaniem X'ów  "out of range" więc tylko ręce załamać :(



Po googlaniu znalazłem informacje (akurat dla mojego modelu). Skopiowałem kilka linijek do xorg i teraz mam:

Kod: [Zaznacz]
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Device"
	Identifier	"Configured Video Device"
	Driver      "nv"
EndSection

Section "Monitor"
    Identifier    "Generic Monitor"
    Option        "DPMS"
    HorizSync    30-81
    VertRefresh    56-75
	modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
Gamma 1.0
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Device		"Configured Video Device"
    Monitor        "Generic Monitor"
    DefaultDepth 24
    SubSection "Display"
Depth 24
Virtual 1280 1024
Modes "800x600@72" "800x600@75" "800x600@56" "800x600@60" "640x480@75" "832x624@75" "640x480@72" "1024x768@75" "640x480@60" "1024x768@70" "1024x768@60" "1152x864@75" "1280x1024@75"
EndSubSection
EndSection
no hurra. Mogę zmienić rozdzielczość na 1280x1024 ale dzieje sie coś dziwnego. Cały obraz rozciąga się i jakby wychodzi poza monitor. Żeby zobaczyć co jest np. w lewym dolnym rogu muszę kursorem przesunąć ekran :/. Nie wiem czy dobrze sie wyraziłem.

Info wziąłem z forum Ubuntu
Zapisane

chmooreck

  • Gość
Jak wymusic rozdzielczosc na LCD?
« Odpowiedź #4 dnia: 2008-10-28, 23:05:46 »
możesz się pobawić jeszcze jakimś generatorem modeline (np.: http://xtiming.sourceforge.net/cgi-bin/xtiming.pl)
może akurat z którymś trybem trafisz ;-)
spróbuj z niższym odświeżaniem (60, 70Hz)
Ew. pogrzeb w windowsowych sterownikach monitora - może wyciągniesz coś więcej informacji
Zapisane

Małolat

  • Gość
Jak wymusic rozdzielczosc na LCD?
« Odpowiedź #5 dnia: 2008-10-28, 23:40:24 »
Nie wiem, ten generator nie pomaga. Pozwolę sobie wkleić zawartość sterownika (a raczej pliku tekstowego z rozszerzeniem *.inf):
Kod: [Zaznacz]
;==================================================

; SM910V.inf 07/20/2004 ver. 1.0

;

; Copyright 2004 Samsung Electronics Corporation

;

; This is a Setup information file for Samsung Monitor. 

;==================================================



[Version]

signature="$CHICAGO$"

Class=Monitor

ClassGuid={4D36E96E-E325-11CE-BFC1-08002BE10318}

Provider=%Samsung%

CatalogFile=SM910V.cat

DriverVer=07/20/2004,1.0



;--------------------------------------------------

[ControlFlags]

ExcludeFromSelect.nt=Monitor\\SAM0115



[ClassInstall32]

AddReg=ClassAddReg32



[ClassAddReg32]

HKR,,,,%MonitorClassName%

HKR,,Icon,,"-1"

HKR,,NoInstallClass,,1



[DestinationDirs]

DefaultDestDir = 11

SM910V.CopyFiles = 23



[SourceDisksNames]

1=%DISK%,,,



[SourceDisksFiles]

SM910V.icm=1



[Manufacturer]

%Samsung%=Samsung



; Manufacturer sections

;-----------------------------------------------------

[Samsung]

%SM910V%=SM910V.Install, Monitor\\SAM0115



; Install Sections

;-----------------------------------------------------



[SM910V.Install]

DelReg=DEL_CURRENT_REG

AddReg=SM910V.AddReg, 1280, DPMS

CopyFiles=SM910V.CopyFiles





; Addreg & DelReg sections

;-----------------------------------------------------



[DEL_CURRENT_REG]

HKR,MODES

HKR,,MaxResolution

HKR,,DPMS

HKR,,ICMProfile





[1280]

HKR,,MaxResolution,,"1280,1024"





[DPMS]

HKR,,DPMS,,1



; AddReg sections

;-----------------------------------------------------





[SM910V.AddReg]

HKR,"MODES\\1280,1024",Mode1,,"30-81,56-75,+,+"

HKR,,ICMProfile,0,"SM910V.icm"





;------------------------------------------------------



[SM910V.CopyFiles]

SM910V.icm





;------------------------------------------------------



[Strings]

DISK="Samsung Monitor Installation Disk"

MonitorClassName="Monitor"

Samsung="Samsung"

SM910V="SyncMaster 910V/910M/913V/915V"
ktoś widzi tu jakieś nowe informacje?
Zapisane

arctgx

  • Gość
Jak wymusic rozdzielczosc na LCD?
« Odpowiedź #6 dnia: 2008-10-29, 00:43:46 »
Proponuję na chwilę zakomentować linię z Modes, a w sekcji Monitor wypróbować
Kod: [Zaznacz]
Option          "PreferredMode"         "1280x1024@75"
- o ile tylko RandR to widzi.  Sam chciałbym widzieć, co teraz pokazuje xrandr.

Próbą obejścia może być wspomniany już kiedyś przeze mnie wpis Virtual 1280 1024 w podsekcji Display. On jednak nie mówi serwerowi o odświeżaniu.

W razie problemów z samym użyciem tych wpisów pomocą służy man xorg.conf.
Zapisane

chmooreck

  • Gość
Jak wymusic rozdzielczosc na LCD?
« Odpowiedź #7 dnia: 2008-10-29, 08:07:47 »
Kod: [Zaznacz]
HKR,"MODES\\1280,1024",Mode1,,"30-81,56-75,+,+"
zgaduje, ze +,+ to może być hsync vsync
pobaw się trochę tym generatorem...
Zapisane
Strony: [1]   Do góry
« poprzedni następny »