Nowe posty

Autor Wątek: instalacja skystar usb2  (Przeczytany 4839 razy)

Offline

  • Users
  • Nowy na forum
  • *
  • Wiadomości: 5
    • Zobacz profil
instalacja skystar usb2
« dnia: 2008-09-30, 13:55:40 »
Witam wszystkich

Mam pytanie dotyczące karty tv dvb-s skystar usb2.  
Czy ktoś  ją zdołał uruchomić i czy jest gdzieś jakiś opis instalacji np. na Ubuntu lub Mandriva lub innym distro?

Za wszelką pomoc bardzo dziękuje.
Pozdrawiam

Offline arctgx

  • Users
  • Guru
  • *****
  • Wiadomości: 2753
    • Zobacz profil
instalacja skystar usb2
« Odpowiedź #1 dnia: 2008-09-30, 15:02:22 »
Zamiast handlowej nazwy lepiej podaj wynik polecenia lsusb oraz wpisy w poleceniu dmesg wywołanym jakąś minutę po podłączeniu karty. Może nazwa czipu więcej powie, jeśli zostanie wykryta. Wynik polecenia lsmod też możesz dorzucić.

Dla przykładu, moja karta TV (PCI) na zewnątrz zwie się "WinFast TV 2000 XP", ale więcej mówi info z polecenia lspci: "Brooktree Corporation Bt878 Video Capture" i tego zdaje się lepiej użyć w wyszukiwaniu dla znalezienia sterownika.
Użytkownik: Ib5sXfcCkvYR
Hasło: adam

Offline

  • Users
  • Nowy na forum
  • *
  • Wiadomości: 5
    • Zobacz profil
instalacja skystar usb2
« Odpowiedź #2 dnia: 2008-10-01, 05:56:37 »
Wynik dla lsusb:
tina42@tina42:~$ lsusb
Bus 002 Device 004: ID 062a:0102 Creative Labs
Bus 002 Device 002: ID 1267:0210 Logic3 / SpectraVideo plc
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 007: ID 13d0:2282  
Bus 001 Device 005: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1 Flash Card Reader/Writer (Internal/External)
Bus 001 Device 001: ID 0000:0000  
.
Wynik dla dmesg:
31.064604] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   31.064704] usb usb1: configuration #1 chosen from 1 choice
[   31.064721] hub 1-0:1.0: USB hub found
[   31.064726] hub 1-0:1.0: 8 ports detected
[   31.167374] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[   31.167380] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 18
[   31.167922] eth1: RealTek RTL8139 at 0xa000, 00:e0:4c:81:10:cc, IRQ 18
[   31.167924] eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
[   31.170042] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[   31.170046] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 19
[   31.170053] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   31.170056] ohci_hcd 0000:00:02.0: OHCI Host Controller
[   31.170077] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[   31.170090] ohci_hcd 0000:00:02.0: irq 19, io mem 0xee006000
[   31.170651] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   31.225046] usb usb2: configuration #1 chosen from 1 choice
[   31.225064] hub 2-0:1.0: USB hub found
[   31.225069] hub 2-0:1.0: 8 ports detected
[   31.326968] sata_nv 0000:00:08.0: version 3.5
[   31.327236] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[   31.327241] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20
[   31.327266] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   31.327706] scsi0 : sata_nv
[   31.328262] scsi1 : sata_nv
[   31.328361] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 20
[   31.328363] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 20
[   31.406838] usb 1-2: new high speed USB device using ehci_hcd and address 2
[   31.539161] usb 1-2: configuration #1 chosen from 1 choice
[   31.794538] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   31.822616] ata1.00: HPA unlocked: 625140335 -> 625142448, native 625142448
[   31.822620] ata1.00: ATA-8: WDC WD3200AAJS-00YFA0, 12.01C02, max UDMA/133
[   31.822623] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   31.843039] ata1.00: configured for UDMA/133
[   32.146261] usb 1-7: new high speed USB device using ehci_hcd and address 5
[   32.162231] ata2: SATA link down (SStatus 0 SControl 300)
[   32.172551] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200AAJS-0 12.0 PQ: 0 ANSI: 5
[   32.172778] pata_amd 0000:00:06.0: version 0.3.10
[   32.172815] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   32.173336] scsi2 : pata_amd
[   32.173514] scsi3 : pata_amd
[   32.173926] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[   32.173928] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[   32.282247] usb 1-7: configuration #1 chosen from 1 choice
[   32.490352] ata3.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.02, max UDMA/66
[   32.585912] usb 2-3: new low speed USB device using ohci_hcd and address 2
[   32.662153] ata3.00: configured for UDMA/66
[   32.662175] ata4: port disabled. ignoring.
[   32.663605] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H55N 1.02 PQ: 0 ANSI: 5
[   32.670899] Driver 'sd' needs updating - please use bus_type methods
[   32.670952] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[   32.670962] sd 0:0:0:0: [sda] Write Protect is off
[   32.670964] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   32.670976] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   32.671011] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[   32.671017] sd 0:0:0:0: [sda] Write Protect is off
[   32.671019] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   32.671029] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   32.671032]  sda: sda1 sda2 <<4>Driver 'sr' needs updating - please use bus_type methods
[   32.684808]  sda5 sda6 sda7 sda8 sda9 >
[   32.730978] sd 0:0:0:0: [sda] Attached SCSI disk
[   32.735564] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   32.735578] sr 2:0:0:0: Attached scsi generic sg1 type 5
[   32.736545] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   32.736548] Uniform CD-ROM driver Revision: 3.20
[   32.736584] sr 2:0:0:0: Attached scsi CD-ROM sr0
[   32.798920] usb 2-3: configuration #1 chosen from 1 choice
[   33.105509] usb 2-4: new low speed USB device using ohci_hcd and address 3
[   33.338533] usb 2-4: configuration #1 chosen from 1 choice
[   33.341565] usbcore: registered new interface driver hiddev
[   33.347559] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input1
[   33.366818] input,hidraw0: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:02.0-3
[   33.373545] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input2
[   33.390787] input,hidraw1: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:02.0-4
[   33.400609] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/input/input3
[   33.426783] input,hiddev96,hidraw2: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:02.0-4
[   33.426798] usbcore: registered new interface driver usbhid
[   33.426808] usbcore: registered new interface driver libusual
[   33.426811] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   33.431484] Initializing USB Mass Storage driver...
[   33.431539] scsi4 : SCSI emulation for USB Mass Storage devices
[   33.431588] usbcore: registered new interface driver usb-storage
[   33.431590] USB Mass Storage support registered.
[   33.431661] usb-storage: device found at 5
[   33.431662] usb-storage: waiting for device to settle before scanning
[   33.479144] Attempting manual resume
[   33.479147] swsusp: Resume From Partition 8:8
[   33.479148] PM: Checking swsusp image.
[   33.479335] PM: Resume from disk failed.
[   33.510805] kjournald starting.  Commit interval 5 seconds
[   33.510810] EXT3-fs: mounted filesystem with ordered data mode.
[   38.429472] usb-storage: device scan complete
[   38.430096] scsi 4:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[   38.430588] scsi 4:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[   38.431095] scsi 4:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[   38.431587] scsi 4:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[   38.432856] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[   38.432880] sd 4:0:0:0: Attached scsi generic sg2 type 0
[   38.433722] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[   38.433740] sd 4:0:0:1: Attached scsi generic sg3 type 0
[   38.434595] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[   38.434613] sd 4:0:0:2: Attached scsi generic sg4 type 0
[   38.435474] sd 4:0:0:3: [sde] Attached SCSI removable disk
[   38.435491] sd 4:0:0:3: Attached scsi generic sg5 type 0
[   38.617915] ip_tables: (C) 2000-2006 Netfilter Core Team
[   38.684444] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   39.148861] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[   39.148878] i2c-adapter i2c-1: nForce2 SMBus adapter at 0xc000
[   39.164874] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   39.264752] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   39.440992] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   39.670598] input: Power Button (FF) as /devices/virtual/input/input5
[   39.693833] ACPI: Power Button (FF) [PWRF]
[   39.693964] input: Power Button (CM) as /devices/virtual/input/input6
[   39.725795] ACPI: Power Button (CM) [PWRB]
[   39.874616] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[   40.112154] Linux agpgart interface v0.102
[   40.171418] nvidia: module license 'NVIDIA' taints kernel.
[   40.424100] parport_pc 00:09: reported by Plug and Play ACPI
[   40.424152] parport0: PC-style at 0x378 (0x778), irq 7ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[   40.424347] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 21
[   40.424354] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   40.424442] NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07 PST 2008
[   40.425615] , dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   40.616659] NET: Registered protocol family 10
[   40.616910] lo: Disabled Privacy Extensions
[   40.692827] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[   40.692831] ACPI: PCI Interrupt 0000:00:05.0[b] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 16
[   40.692847] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   40.727754] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
[   40.864079] NET: Registered protocol family 17
[   41.292031] lp0: using parport0 (interrupt-driven).
[   41.342562] Adding 2000052k swap on /dev/sda8.  Priority:-1 extents:1 across:2000052k
[   41.896271] EXT3 FS on sda9, internal journal
[   42.008740] usb 1-2: USB disconnect, address 2
[   48.045787] No dock devices found.
[   48.096670] usb 2-4: USB disconnect, address 3
[   48.480046] Inbound IN=eth0 OUT= MAC=00:1d:7d:9e:6a:f0:00:19:07:f8:e0:01:08:00 SRC=193.138.140.27 DST=89.79.74.84 LEN=95 TOS=0x00 PREC=0x00 TTL=118 ID=2174 PROTO=UDP SPT=63510 DPT=63928 LEN=75
[   48.991348] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   48.991352] apm: disabled - APM is not SMP safe.
[   49.099359] ppdev: user-space parallel port driver
[   49.229142] audit(1222831975.655:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=6254 profile="/usr/sbin/cupsd" namespace="default"
[   49.627038] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[   49.627086] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[   49.627106] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[   49.627134] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[   49.627161] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[   50.625297] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=258 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=238
[   50.625331] Inbound IN=eth1 OUT= MAC= SRC=192.168.1.1 DST=192.168.1.255 LEN=258 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=238
[   50.881346] Bluetooth: Core ver 2.11
[   50.881420] NET: Registered protocol family 31
[   50.881422] Bluetooth: HCI device and connection manager initialized
[   50.881425] Bluetooth: HCI socket layer initialized
[   50.911850] Bluetooth: L2CAP ver 2.9
[   50.911854] Bluetooth: L2CAP socket layer initialized
[   50.950538] Bluetooth: RFCOMM socket layer initialized
[   50.950549] Bluetooth: RFCOMM TTY layer initialized
[   50.950550] Bluetooth: RFCOMM ver 1.8
[   51.040891] eth0: no IPv6 routers present
[   51.566976] eth1: no IPv6 routers present
[   51.622981] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[   51.623000] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[   51.623016] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[   51.623029] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[   51.623050] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[   52.622199] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[   52.622220] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[   52.622235] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[   52.622247] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[   52.622259] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[   53.640205] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[   53.640226] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[   53.640242] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[   53.640254] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[   53.640267] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[   53.949117] usb 2-2: new low speed USB device using ohci_hcd and address 4
[   54.169339] usb 2-2: configuration #1 chosen from 1 choice
[   54.179394] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input7
[   54.218423] input,hidraw1: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:02.0-2
[   54.234606] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input8
[   54.298391] input,hiddev96,hidraw2: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:02.0-2
[   63.451145] usb 1-4: new high speed USB device using ehci_hcd and address 7
[   63.586928] usb 1-4: configuration #1 chosen from 1 choice
[   82.995604] Inbound IN=eth0 OUT= MAC=00:1d:7d:9e:6a:f0:00:19:07:f8:e0:01:08:00 SRC=41.244.80.73 DST=89.79.74.84 LEN=90 TOS=0x00 PREC=0x00 TTL=112 ID=15959 PROTO=UDP SPT=8345 DPT=63928 LEN=70
[  124.613586] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=258 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=238
[  124.613617] Inbound IN=eth1 OUT= MAC= SRC=192.168.1.1 DST=192.168.1.255 LEN=258 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=238
[  125.462128] Inbound IN=eth0 OUT= MAC=00:1d:7d:9e:6a:f0:00:19:07:f8:e0:01:08:00 SRC=91.199.250.9 DST=89.79.74.84 LEN=48 TOS=0x00 PREC=0x00 TTL=117 ID=51797 DF PROTO=TCP SPT=63853 DPT=63928 WINDOW=65535 RES=0x00 SYN URGP=0
[  128.477385] Inbound IN=eth0 OUT= MAC=00:1d:7d:9e:6a:f0:00:19:07:f8:e0:01:08:00 SRC=91.199.250.9 DST=89.79.74.84 LEN=48 TOS=0x00 PREC=0x00 TTL=117 ID=52122 DF PROTO=TCP SPT=63853 DPT=63928 WINDOW=65535 RES=0x00 SYN URGP=0
[  134.508051] Inbound IN=eth0 OUT= MAC=00:1d:7d:9e:6a:f0:00:19:07:f8:e0:01:08:00 SRC=91.199.250.9 DST=89.79.74.84 LEN=48 TOS=0x00 PREC=0x00 TTL=117 ID=52787 DF PROTO=TCP SPT=63853 DPT=63928 WINDOW=65535 RES=0x00 SYN URGP=0
[  142.616871] usb 1-7: reset high speed USB device using ehci_hcd and address 5
[  184.579862] usb 1-7: reset high speed USB device using ehci_hcd and address 5
[  196.231466] Inbound IN=eth0 OUT= MAC=00:1d:7d:9e:6a:f0:00:19:07:f8:e0:01:08:00 SRC=65.26.232.212 DST=89.79.74.84 LEN=90 TOS=0x00 PREC=0x00 TTL=113 ID=46737 PROTO=UDP SPT=3897 DPT=62548 LEN=70
[  210.558227] usb 1-7: reset high speed USB device using ehci_hcd and address 5
[  244.520771] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=258 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=238
[  244.520803] Inbound IN=eth1 OUT= MAC= SRC=192.168.1.1 DST=192.168.1.255 LEN=258 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=238
[  300.488702] usb 1-7: reset high speed USB device using ehci_hcd and address 5
[  304.489551] usb 1-7: reset high speed USB device using ehci_hcd and address 5
[  364.424993] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=58
[  364.425031] Inbound IN=eth1 OUT= MAC= SRC=192.168.1.1 DST=192.168.1.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=58
[  366.424880] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=58
[  366.424904] Inbound IN=eth1 OUT= MAC= SRC=192.168.1.1 DST=192.168.1.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=58
[  367.422585] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=58
[  367.422604] Inbound IN=eth1 OUT= MAC= SRC=192.168.1.1 DST=192.168.1.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=58
[  368.421807] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=58
[  368.421828] Inbound IN=eth1 OUT= MAC= SRC=192.168.1.1 DST=192.168.1.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=58
[  380.412388] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=217 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=197
[  380.412420] Inbound IN=eth1 OUT= MAC= SRC=192.168.1.1 DST=192.168.1.255 LEN=217 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=197
[  380.496569] Inbound IN=eth0 OUT= MAC=00:1d:7d:9e:6a:f0:00:19:07:f8:e0:01:08:00 SRC=83.168.79.10 DST=89.79.74.84 LEN=48 TOS=0x00 PREC=0x00 TTL=118 ID=37415 DF PROTO=TCP SPT=2409 DPT=63928 WINDOW=65535 RES=0x00 SYN URGP=0
[  382.410815] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=217 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=197
[  382.410845] Inbound IN=eth1 OUT= MAC= SRC=192.168.1.1 DST=192.168.1.255 LEN=217 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=197
[  383.507761] Inbound IN=eth0 OUT= MAC=00:1d:7d:9e:6a:f0:00:19:07:f8:e0:01:08:00 SRC=83.168.79.10 DST=89.79.74.84 LEN=48 TOS=0x00 PREC=0x00 TTL=118 ID=37491 DF PROTO=TCP SPT=2409 DPT=63928 WINDOW=65535 RES=0x00 SYN URGP=0
[  384.410744] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=217 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=197
[  384.410773] Inbound IN=eth1 OUT= MAC= SRC=192.168.1.1 DST=192.168.1.255 LEN=217 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=197
[  386.408808] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=217 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=197
[  386.408839] Inbound IN=eth1 OUT= MAC= SRC=192.168.1.1 DST=192.168.1.255 LEN=217 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=197
[  388.407599] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=217 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=197
[  388.407642] Inbound IN=eth0 OUT= MAC= SRC=89.79.74.84 DST=89.79.74.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
[  388.407665] Inbound IN=eth1 OUT= MAC= SRC=192.168.1.1 DST=192.168.1.255 LEN=217 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=197
[  388.407685] Inbound IN=eth1 OUT= MAC= SRC=192.168.1.1 DST=192.168.1.255 LEN=96 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=137 DPT=137 LEN=76
.
Wynik dla lspci:
lspci
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control
01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:00.0 VGA compatible controller: nVidia Corporation GeForce 8600 GT (rev a1)
.

Offline

  • Users
  • Nowy na forum
  • *
  • Wiadomości: 5
    • Zobacz profil
instalacja skystar usb2
« Odpowiedź #3 dnia: 2008-10-04, 19:39:08 »
ciekaw jestem czemu mojej karty Ubuntu i Mandriva nie potrafi wykryć. Może Linux słabo radzi sobie z high speed USB.

Offline

  • Users
  • Nowy na forum
  • *
  • Wiadomości: 5
    • Zobacz profil
instalacja skystar usb2
« Odpowiedź #4 dnia: 2008-10-22, 18:46:23 »
witam

po załadowaniu modułów :
modprobe cx24123
modprobe dvb-core
modprobe s5h1420
modprobe dvb-usb-cxusb
modprobe dvb-usb-ttusb2
modprobe dvb-usb
modprobe b2c2-flexcop
modprobe b2c2-flexcop-pci
modprobe b2c2-flexcop-usb

komenda dmesg wyplówa informacje o chipie karty flexcop. Lecz po instalacji programów do jej obługi
wywala że niema nic w adapter0

Za wszelką pomoc z góry dziękuje