Nowe posty

xx FirebirdSQL server w xinetd (1)
Wczoraj o 08:31:48
xx [SOLVED] Poczta Linux.pl (9)
2022-08-09, 15:09:29
xx Dostęp z komputerów z windowsem do plików udostępnionych na serwerze linux (samb (0)
2022-08-08, 20:27:55
xx brak uprawnienia do zamontowanej partycji ntfs - elementaryOS 6,1 (5)
2022-08-08, 06:36:07
xx Jak zainstalować sterowniki do karty sieciowej TP LINK WN350GD (1)
2022-08-04, 05:55:46
xx Ubuntu vs Fedora (1)
2022-07-26, 03:40:58
xx virtualization technology (1)
2022-07-25, 21:27:10
xx Migracja z centos 6 na centos 7 (3)
2022-07-25, 07:31:19
xx akonadi w KDE5 (10)
2022-07-22, 23:34:05
xx Alternatywa dla Delphi (7)
2022-07-22, 15:27:42

Autor Wątek: Linksys wrt54gs ubuntu nie wykrywa sieci  (Przeczytany 4537 razy)

Walc

  • Gość
Linksys wrt54gs ubuntu nie wykrywa sieci
« dnia: 2008-04-19, 00:51:13 »
Witam
Dzis zakupilem linksysa WRT54GS. Bez problemu podlaczylem go do kompa stacjonarno kablem, nie ustawiajac jakichkolwiek zabezpieczen poki co.
Problem mam z ustawieniem sieci wireless na lapku hp compaq nx7400.
Mianowicie w system>administracja>siec : mam tylko 2 reczy: wired & modem connection obie 'siwe, nieaktywne" co akurat nie jest chyna dziwne, ale nie ma tam wireless connection....

po wpisaniu lspci mam:

robert@lapek:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 01)
02:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
02:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
robert@lapek:~$
iwconfig
sudo lshw -C network

robert@lapek:~$ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

robert@lapek:~$ sudo lshw -C network
[sudo] password for robert:
  *-network              
       description: Network controller
       product: PRO/Wireless 3945ABG Network Connection
       vendor: Intel Corporation
       physical id: 0
       bus info: pci@0000:10:00.0
       version: 02
       width: 32 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list
       configuration: driver=ipw3945 latency=0 module=ipw3945
  *-network
       description: Ethernet interface
       product: BCM4401-B0 100Base-TX
       vendor: Broadcom Corporation
       physical id: e
       bus info: pci@0000:02:0e.0
       logical name: eth0
       version: 02
       serial: 00:17:08:2d:bb:a3
       size: 10MB/s
       capacity: 100MB/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=1.01 duplex=half latency=64 link=no module=b44 multicast=yes port=twisted pair speed=10MB/s
robert@lapek:~$
cat /etc/network/interfaces
sudo modprobe -r ipw3945
sudo modprobe ipw3945
iwconfig

robert@lapek:~$ cat /etc/network/interfaces 
auto lo
iface lo inet loopback

robert@lapek:~$ sudo modprobe -r ipw3945
[sudo] password for robert:
robert@lapek:~$ sudo modprobe ipw3945
robert@lapek:~$
robert@lapek:~$ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.









po tym zauwazylem ze w zakladkach dns i hosts sa jakies wpisy, na dowod czego zamieszczam screeny. w zakladce dns widze ze zgadza sie moj dns 1 i dns 2, domain name tez....ale wciaz nie ma wireless connection w liscie sieci
pozmozcie.....

jakby co link do mojego oryginalnego tematu: http://ubuntuforums.org/showthread.php?t=758675

Walc

  • Gość
Linksys wrt54gs ubuntu nie wykrywa sieci
« Odpowiedź #1 dnia: 2008-04-19, 16:45:23 »
bump..?

maciasz

  • Gość
Linksys wrt54gs ubuntu nie wykrywa sieci
« Odpowiedź #2 dnia: 2008-04-19, 21:18:22 »
Wklej wynik polecenia dmesg po załadowaniu modułu.

Walc

  • Gość
Linksys wrt54gs ubuntu nie wykrywa sieci
« Odpowiedź #3 dnia: 2008-04-19, 22:13:40 »
[   17.570298] ACPI: bus type pci registered
[   17.571590] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32
[   17.571592] PCI: Using configuration type 1
[   17.571594] Setting up standard PCI resources
[   17.573671] ACPI: EC: Look up EC in DSDT
[   17.574312] ACPI: EC: GPE=0x16, ports=0x66, 0x62
[   17.623893] ACPI: Interpreter enabled
[   17.623897] ACPI: (supports S0 S3 S4 S5)
[   17.623912] ACPI: Using IOAPIC for interrupt routing
[   17.635364] ACPI: EC: GPE=0x16, ports=0x66, 0x62
[   17.635443] ACPI: PCI Root Bridge [C002] (0000:00)
[   17.635456] PCI: Probing PCI hardware (bus 00)
[   17.636213] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[   17.636218] PCI quirk: region 1100-113f claimed by ICH6 GPIO
[   17.637105] PCI: Transparent bridge - 0000:00:1e.0
[   17.637241] ACPI: PCI Interrupt Routing Table [\\_SB_.C002._PRT]
[   17.637588] ACPI: PCI Interrupt Routing Table [\\_SB_.C002.C093._PRT]
[   17.637752] ACPI: PCI Interrupt Routing Table [\\_SB_.C002.C0FC._PRT]
[   17.637894] ACPI: PCI Interrupt Routing Table [\\_SB_.C002.C10C._PRT]
[   17.638038] ACPI: PCI Interrupt Routing Table [\\_SB_.C002.C112._PRT]
[   17.673810] ACPI: PCI Interrupt Link [C108] (IRQs *10 11)
[   17.674035] ACPI: PCI Interrupt Link [C109] (IRQs 10 *11)
[   17.674255] ACPI: PCI Interrupt Link [C10A] (IRQs 10 *11)
[   17.674476] ACPI: PCI Interrupt Link [C10B] (IRQs *10 11)
[   17.674695] ACPI: PCI Interrupt Link [C124] (IRQs *10 11)
[   17.674908] ACPI: PCI Interrupt Link [C125] (IRQs 10 11) *0, disabled.
[   17.675122] ACPI: PCI Interrupt Link [C126] (IRQs 10 11) *0, disabled.
[   17.675228] ACPI Exception (pci_link-0179): AE_NOT_FOUND, Evaluating _PRS [20070126]
[   17.675573] ACPI: Power Resource [C1F7] (on)
[   17.675629] ACPI: Power Resource [C20D] (on)
[   17.675688] ACPI: Power Resource [C216] (off)
[   17.675805] ACPI: Power Resource [C2FF] (off)
[   17.675910] ACPI: Power Resource [C300] (off)
[   17.676014] ACPI: Power Resource [C301] (off)
[   17.676118] ACPI: Power Resource [C302] (off)
[   17.676134] Linux Plug and Play Support v0.97 (c) Adam Belay
[   17.676144] pnp: PnP ACPI init
[   17.676152] ACPI: bus type pnp registered
[   17.684893] pnp: PnP ACPI: found 12 devices
[   17.684896] ACPI: ACPI bus type pnp unregistered
[   17.684901] PnPBIOS: Disabled by ACPI PNP
[   17.684952] PCI: Using ACPI for IRQ routing
[   17.684954] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   17.785326] NET: Registered protocol family 8
[   17.785328] NET: Registered protocol family 20
[   17.785376] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
[   17.785379] pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
[   17.785383] pnp: 00:00: iomem range 0x100000-0x3f7fffff could not be reserved
[   17.785392] pnp: 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
[   17.785396] pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[   17.785401] pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[   17.785404] pnp: 00:0a: ioport range 0x1000-0x107f has been reserved
[   17.785407] pnp: 00:0a: ioport range 0x1100-0x113f has been reserved
[   17.785410] pnp: 00:0a: ioport range 0x1200-0x121f has been reserved
[   17.785413] pnp: 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved
[   17.785416] pnp: 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved
[   17.785420] pnp: 00:0a: iomem range 0xfed20000-0xfed3ffff could not be reserved
[   17.785423] pnp: 00:0a: iomem range 0xfed45000-0xfed8ffff could not be reserved
[   17.785428] pnp: 00:0b: iomem range 0xfeda0000-0xfedbffff could not be reserved
[   17.785432] pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
[   17.788929] Time: tsc clocksource has been installed.
[   17.815738] PCI: Bridge: 0000:00:1c.0
[   17.815740]   IO window: disabled.
[   17.815746]   MEM window: disabled.
[   17.815751]   PREFETCH window: disabled.
[   17.815757] PCI: Bridge: 0000:00:1c.1
[   17.815759]   IO window: disabled.
[   17.815765]   MEM window: f4000000-f40fffff
[   17.815770]   PREFETCH window: disabled.
[   17.815776] PCI: Bridge: 0000:00:1c.3
[   17.815779]   IO window: 2000-3fff
[   17.815785]   MEM window: f0000000-f3ffffff
[   17.815790]   PREFETCH window: disabled.
[   17.815798] PCI: Bus 3, cardbus bridge: 0000:02:06.0
[   17.815800]   IO window: 00005000-000050ff
[   17.815806]   IO window: 00005400-000054ff
[   17.815811]   PREFETCH window: 40000000-43ffffff
[   17.815817]   MEM window: 44000000-47ffffff
[   17.815822] PCI: Bridge: 0000:00:1e.0
[   17.815825]   IO window: 5000-5fff
[   17.815831]   MEM window: f4100000-f43fffff
[   17.815836]   PREFETCH window: 40000000-43ffffff
[   17.815865] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[   17.815873] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   17.815897] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 17
[   17.815904] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   17.815928] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
[   17.815935] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   17.815949] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   17.815967] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 19
[   17.815982] NET: Registered protocol family 2
[   17.853033] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   17.853108] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[   17.854167] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   17.854558] TCP: Hash tables configured (established 131072 bind 65536)
[   17.854563] TCP reno registered
[   17.865143] checking if image is initramfs... it is
[   18.316759] Switched to high resolution mode on CPU 0
[   18.316841] Switched to high resolution mode on CPU 1
[   18.532836] Freeing initrd memory: 7062k freed
[   18.533404] audit: initializing netlink socket (disabled)
[   18.533417] audit(1208623227.464:1): initialized
[   18.533522] highmem bounce pool size: 64 pages
[   18.535416] VFS: Disk quotas dquot_6.5.1
[   18.535466] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   18.535558] io scheduler noop registered
[   18.535560] io scheduler anticipatory registered
[   18.535562] io scheduler deadline registered
[   18.535577] io scheduler cfq registered (default)
[   18.535594] Boot video device is 0000:00:02.0
[   18.535761] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   18.535820] assign_interrupt_mode Found MSI capability
[   18.535824] Allocate Port Service[0000:00:1c.0:pcie00]
[   18.535857] Allocate Port Service[0000:00:1c.0:pcie02]
[   18.535955] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   18.536014] assign_interrupt_mode Found MSI capability
[   18.536016] Allocate Port Service[0000:00:1c.1:pcie00]
[   18.536046] Allocate Port Service[0000:00:1c.1:pcie02]
[   18.536148] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   18.536206] assign_interrupt_mode Found MSI capability
[   18.536208] Allocate Port Service[0000:00:1c.3:pcie00]
[   18.536239] Allocate Port Service[0000:00:1c.3:pcie02]
[   18.536395] isapnp: Scanning for PnP cards...
[   18.890159] isapnp: No Plug & Play device found
[   18.912876] Real Time Clock Driver v1.12ac
[   18.913025] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   18.914141] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   18.914357] input: Macintosh mouse button emulation as /class/input/input0
[   18.914438] PNP: PS/2 Controller [PNP0303:C20A,PNP0f13:C20B] at 0x60,0x64 irq 1,12
[   18.916845] i8042.c: Detected active multiplexing controller, rev 1.1.
[   18.917546] serio: i8042 KBD port at 0x60,0x64 irq 1
[   18.917551] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   18.917555] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   18.917558] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   18.917561] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   18.917685] mice: PS/2 mouse device common for all mice
[   18.917817] EISA: Probing bus 0 at eisa.0
[   18.917824] Cannot allocate resource for EISA slot 1
[   18.917827] Cannot allocate resource for EISA slot 2
[   18.917830] Cannot allocate resource for EISA slot 3
[   18.917832] Cannot allocate resource for EISA slot 4
[   18.917835] Cannot allocate resource for EISA slot 5
[   18.917850] EISA: Detected 0 cards.
[   18.917941] TCP cubic registered
[   18.917957] NET: Registered protocol family 1
[   18.917981] Using IPI No-Shortcut mode
[   18.918140]   Magic number: 4:245:692
[   18.918494] Freeing unused kernel memory: 364k freed
[   18.946205] input: AT Translated Set 2 keyboard as /class/input/input1
[   20.124286] AppArmor: AppArmor initialized<5>audit(1208623228.964:2):  type=1505 info="AppArmor initialized" pid=1272
[   20.132247] fuse init (API version 7.8)
[   20.137650] Failure registering capabilities with primary security module.
[   20.172399] ACPI: Transitioning device [C303] to D3
[   20.172402] ACPI: Transitioning device [C303] to D3
[   20.172405] ACPI: Fan [C303] (off)
[   20.172607] ACPI: Transitioning device [C304] to D3
[   20.172609] ACPI: Transitioning device [C304] to D3
[   20.172612] ACPI: Fan [C304] (off)
[   20.172819] ACPI: Transitioning device [C305] to D3
[   20.172821] ACPI: Transitioning device [C305] to D3
[   20.172824] ACPI: Fan [C305] (off)
[   20.173024] ACPI: Transitioning device [C306] to D3
[   20.173026] ACPI: Transitioning device [C306] to D3
[   20.173031] ACPI: Fan [C306] (off)
[   20.178183] ACPI: SSDT 3F7F465B, 01EA (r1 HP      Cpu0Ist     3000 INTL 20050624)
[   20.178414] ACPI: SSDT 3F7F48CA, 01DB (r1 HP      Cpu0Cst     3001 INTL 20050624)
[   20.182329] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   20.182334] ACPI: Processor [CPU0] (supports 8 throttling states)
[   20.182544] ACPI: SSDT 3F7F45D2, 0089 (r1 HP      Cpu1Ist     3000 INTL 20050624)
[   20.182758] ACPI: SSDT 3F7F4845, 0085 (r1 HP      Cpu1Cst     3000 INTL 20050624)
[   20.183271] ACPI: CPU1 (power states: C1[C1] C2[C2])
[   20.183275] ACPI: Processor [CPU1] (supports 8 throttling states)
[   20.188276] ACPI: Thermal Zone [TZ0] (50 C)
[    3.376000] Marking TSC unstable due to: possible TSC halt in C2.
[    3.376000] ACPI: Thermal Zone [TZ1] (48 C)
[    3.380000] Time: acpi_pm clocksource has been installed.
[    3.392000] ACPI: Thermal Zone [TZ2] (44 C)
[    3.400000] ACPI: Thermal Zone [TZ3] (29 C)
[    3.404000] ACPI: Thermal Zone [TZ4] (26 C)
[    3.848000] usbcore: registered new interface driver usbfs
[    3.848000] usbcore: registered new interface driver hub
[    3.848000] usbcore: registered new device driver usb
[    3.848000] USB Universal Host Controller Interface driver v3.0
[    3.848000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[    3.848000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    3.848000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.848000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    3.848000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004020
[    3.848000] usb usb1: configuration #1 chosen from 1 choice
[    3.848000] hub 1-0:1.0: USB hub found
[    3.848000] hub 1-0:1.0: 2 ports detected
[    3.952000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 17 (level, low) -> IRQ 17
[    3.952000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    3.952000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.952000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    3.952000] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00004040
[    3.952000] usb usb2: configuration #1 chosen from 1 choice
[    3.952000] hub 2-0:1.0: USB hub found
[    3.952000] hub 2-0:1.0: 2 ports detected
[    3.952000] SCSI subsystem initialized
[    3.980000] libata version 2.21 loaded.
[    4.056000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[    4.056000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    4.056000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    4.056000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    4.056000] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00004060
[    4.056000] usb usb3: configuration #1 chosen from 1 choice
[    4.056000] hub 3-0:1.0: USB hub found
[    4.056000] hub 3-0:1.0: 2 ports detected
[    4.160000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 18
[    4.160000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    4.160000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    4.160000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    4.160000] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004080
[    4.160000] usb usb4: configuration #1 chosen from 1 choice
[    4.160000] hub 4-0:1.0: USB hub found
[    4.160000] hub 4-0:1.0: 2 ports detected
[    4.192000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[    4.264000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[    4.264000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    4.264000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    4.264000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    4.264000] ehci_hcd 0000:00:1d.7: debug port 1
[    4.264000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    4.264000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf4584000
[    4.308000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    4.308000] usb usb5: configuration #1 chosen from 1 choice
[    4.308000] hub 5-0:1.0: USB hub found
[    4.308000] hub 5-0:1.0: 8 ports detected
[    4.412000] ACPI: PCI Interrupt 0000:02:06.1[b] -> GSI 19 (level, low) -> IRQ 18
[    4.460000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[f4101000-f41017ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    4.460000] b44.c:v1.01 (Jun 16, 2006)
[    4.460000] ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 16
[    4.464000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:17:08:2d:bb:a3
[    4.468000] ata_piix 0000:00:1f.2: version 2.11
[    4.468000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    4.468000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 17 (level, low) -> IRQ 17
[    4.468000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    4.468000] scsi0 : ata_piix
[    4.468000] scsi1 : ata_piix
[    4.468000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000140a0 irq 14
[    4.468000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000140a8 irq 15
[    4.632000] ata1.00: ATA-7: ST98823AS, 7.24, max UDMA/100
[    4.632000] ata1.00: 156301488 sectors, multi 16: LBA48
[    4.648000] ata1.00: configured for UDMA/100
[    4.716000] usb 1-1: device not accepting address 2, error -71
[    4.968000] ata2.00: ATAPI: MATSHITADVD-RAM UJ-840S, 1.11, max MWDMA2
[    5.140000] ata2.00: configured for MWDMA2
[    5.140000] scsi 0:0:0:0: Direct-Access     ATA      ST98823AS        7.24 PQ: 0 ANSI: 5
[    5.140000] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-840S  1.11 PQ: 0 ANSI: 5
[    5.152000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[    5.152000] sd 0:0:0:0: [sda] Write Protect is off
[    5.152000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.152000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.152000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[    5.152000] sd 0:0:0:0: [sda] Write Protect is off
[    5.152000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.152000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.152000]  sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.152000] Uniform CD-ROM driver Revision: 3.20
[    5.152000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    5.156000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.156000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.228000]  sda1 sda2
[    5.252000] usb 1-1: new full speed USB device using uhci_hcd and address 4
[    5.252000] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.428000] usb 1-1: configuration #1 chosen from 1 choice
[    5.500000] Attempting manual resume
[    5.500000] swsusp: Resume From Partition 8:2
[    5.500000] PM: Checking swsusp image.
[    5.500000] PM: Resume from disk failed.
[    5.552000] kjournald starting.  Commit interval 5 seconds
[    5.552000] EXT3-fs: mounted filesystem with ordered data mode.
[   14.260000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   14.264000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.392000] Linux agpgart interface v0.102 (c) Dave Jones
[   14.476000] agpgart: Detected an Intel 945GM Chipset.
[   14.476000] agpgart: Detected 7932K stolen memory.
[   14.496000] agpgart: AGP aperture is 256M @ 0xe0000000
[   14.640000] input: PC Speaker as /class/input/input2
[   14.652000] intel_rng: FWH not detected
[   14.720000] ieee80211_crypt: registered algorithm 'NULL'
[   14.756000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   14.756000] ieee80211: Copyright (C) 2004-2005 Intel Corporation
[   14.804000] Yenta: CardBus bridge found at 0000:02:06.0 [103c:30a2]
[   14.804000] Yenta: Enabling burst memory read transactions
[   14.804000] Yenta: Using INTVAL to route CSC interrupts to PCI
[   14.804000] Yenta: Routing CardBus interrupts to PCI
[   14.804000] Yenta TI: socket 0000:02:06.0, mfunc 0x01011b22, devctl 0x64
[   14.832000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
[   14.832000] serio: Synaptics pass-through port at isa0060/serio4/input0
[   14.848000] iTCO_vendor_support: vendor-support=0
[   14.848000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   14.872000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[   14.872000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[   14.872000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   14.876000] parport_pc 00:02: reported by Plug and Play ACPI
[   14.876000] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   15.016000] Bluetooth: Core ver 2.11
[   15.016000] NET: Registered protocol family 31
[   15.016000] Bluetooth: HCI device and connection manager initialized
[   15.016000] Bluetooth: HCI socket layer initialized
[   15.036000] Yenta: ISA IRQ mask 0x0c78, PCI irq 19
[   15.036000] Socket status: 30000006
[   15.036000] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
[   15.036000] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[   15.036000] cs: IO port probe 0x5000-0x5fff: clean.
[   15.036000] pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf43fffff
[   15.036000] pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
[   15.068000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp
[   15.068000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[   15.068000] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   15.068000] PCI: Setting latency timer of device 0000:10:00.0 to 64
[   15.068000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   15.152000] Bluetooth: HCI USB driver ver 2.9
[   15.156000] usbcore: registered new interface driver hci_usb
[   15.384000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[   15.384000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   15.468000] cs: IO port probe 0x100-0x3af: clean.
[   15.468000] cs: IO port probe 0x3e0-0x4ff: clean.
[   15.472000] cs: IO port probe 0x820-0x8ff: clean.
[   15.472000] cs: IO port probe 0xc00-0xcf7: clean.
[   15.472000] cs: IO port probe 0xa00-0xaff: clean.
[   16.244000] lp0: using parport0 (interrupt-driven).
[   16.308000] Adding 2923820k swap on /dev/sda2.  Priority:-1 extents:1 across:2923820k
[   16.696000] EXT3 FS on sda1, internal journal
[   16.984000] ipw3945: Radio Frequency Kill Switch is On:
[   16.984000] Kill switch must be turned off for wireless networking to work.
[   18.080000] No dock devices found.
[   18.204000] input: Power Button (FF) as /class/input/input4
[   18.204000] ACPI: Power Button (FF) [PWRF]
[   18.208000] input: Sleep Button (CM) as /class/input/input5
[   18.208000] ACPI: Sleep Button (CM) [C234]
[   18.220000] input: Lid Switch as /class/input/input6
[   18.220000] ACPI: Lid Switch [C22D]
[   18.300000] ACPI: AC Adapter [C1B3] (on-line)
[   18.336000] ACPI: Battery Slot [C1B5] (battery present)
[   18.336000] ACPI: Battery Slot [C1B4] (battery absent)
[   18.352000] ACPI: Video Device [C080] (multi-head: yes  rom: no  post: no)
[   19.596000] Failure registering capabilities with primary security module.
[   19.824000] ppdev: user-space parallel port driver
[   20.016000] audit(1208623246.743:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5013 profile="/usr/sbin/cupsd"
[   20.044000] apm: BIOS not found.
[   20.496000] Bluetooth: L2CAP ver 2.8
[   20.496000] Bluetooth: L2CAP socket layer initialized
[   20.628000] Bluetooth: RFCOMM socket layer initialized
[   20.628000] Bluetooth: RFCOMM TTY layer initialized
[   20.628000] Bluetooth: RFCOMM ver 1.8
[   25.804000] [drm] Initialized drm 1.1.0 20060810
[   25.812000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[   25.812000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   45.032000] UDF-fs: No VRS found
[   45.072000] ISO 9660 Extensions: Microsoft Joliet Level 3
[   45.316000] ISOFS: changing to secondary root
[  117.960000] b44: eth0: Link is up at 100 Mbps, full duplex.
[  117.960000] b44: eth0: Flow control is off for TX and off for RX.
[  120.160000] NET: Registered protocol family 17
[  126.820000] NET: Registered protocol family 10
[  126.820000] lo: Disabled Privacy Extensions
[  137.440000] eth0: no IPv6 routers present
[  352.280000] usb 1-1: USB disconnect, address 4
[  354.344000] usb 1-1: new full speed USB device using uhci_hcd and address 5
[  354.520000] usb 1-1: configuration #1 chosen from 1 choice
[  436.700000] Bridge firewalling registered
[  436.744000] Bluetooth: BNEP (Ethernet Emulation) ver 1.2
[  436.744000] Bluetooth: BNEP filters: protocol multicast
[ 3870.696000] usb 1-1: USB disconnect, address 5
[ 3873.008000] usb 1-1: new full speed USB device using uhci_hcd and address 6
[ 3873.180000] usb 1-1: configuration #1 chosen from 1 choice
[ 4297.916000] usb 5-4: new high speed USB device using ehci_hcd and address 5
[ 4298.048000] usb 5-4: configuration #1 chosen from 1 choice
[ 4298.200000] usbcore: registered new interface driver libusual
[ 4298.240000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 4298.240000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 4298.244000] Initializing USB Mass Storage driver...
[ 4298.244000] scsi2 : SCSI emulation for USB Mass Storage devices
[ 4298.244000] usb-storage: device found at 5
[ 4298.244000] usb-storage: waiting for device to settle before scanning
[ 4298.244000] usbcore: registered new interface driver usb-storage
[ 4298.244000] USB Mass Storage support registered.
[ 4303.244000] usb-storage: device scan complete
[ 4303.244000] scsi 2:0:0:0: Direct-Access     Generic  USB Flash Disk   0.00 PQ: 0 ANSI: 2
[ 4303.244000] scsi 2:0:0:1: Direct-Access     Generic  USB Flash Disk   0.00 PQ: 0 ANSI: 2
[ 4303.248000] sd 2:0:0:0: [sdb] 8169471 512-byte hardware sectors (4183 MB)
[ 4303.248000] sd 2:0:0:0: [sdb] Write Protect is off
[ 4303.248000] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 4303.248000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4303.248000] sd 2:0:0:0: [sdb] 8169471 512-byte hardware sectors (4183 MB)
[ 4303.252000] sd 2:0:0:0: [sdb] Write Protect is off
[ 4303.252000] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 4303.252000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 4303.252000]  sdb: sdb1
[ 4303.300000] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 4303.300000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 4303.304000] sd 2:0:0:1: [sdc] 20479 512-byte hardware sectors (10 MB)
[ 4303.304000] sd 2:0:0:1: [sdc] Write Protect is on
[ 4303.304000] sd 2:0:0:1: [sdc] Mode Sense: 0b 00 80 00
[ 4303.304000] sd 2:0:0:1: [sdc] Assuming drive cache: write through
[ 4303.308000] sd 2:0:0:1: [sdc] 20479 512-byte hardware sectors (10 MB)
[ 4303.308000] sd 2:0:0:1: [sdc] Write Protect is on
[ 4303.308000] sd 2:0:0:1: [sdc] Mode Sense: 0b 00 80 00
[ 4303.308000] sd 2:0:0:1: [sdc] Assuming drive cache: write through
[ 4303.308000]  sdc: unknown partition table
[ 4303.388000] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[ 4303.388000] sd 2:0:0:1: Attached scsi generic sg3 type 0
[ 4404.916000] usb 5-4: USB disconnect, address 5
[ 4453.964000] usb 5-6: new high speed USB device using ehci_hcd and address 6
[ 4454.096000] usb 5-6: configuration #1 chosen from 1 choice
[ 4454.096000] scsi3 : SCSI emulation for USB Mass Storage devices
[ 4454.096000] usb-storage: device found at 6
[ 4454.096000] usb-storage: waiting for device to settle before scanning
[ 4459.096000] usb-storage: device scan complete
[ 4459.096000] scsi 3:0:0:0: Direct-Access     Generic  USB Flash Disk   0.00 PQ: 0 ANSI: 2
[ 4459.096000] scsi 3:0:0:1: Direct-Access     Generic  USB Flash Disk   0.00 PQ: 0 ANSI: 2
[ 4459.096000] sd 3:0:0:0: [sdb] 8169471 512-byte hardware sectors (4183 MB)
[ 4459.100000] sd 3:0:0:0: [sdb] Write Protect is off
[ 4459.100000] sd 3:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 4459.100000] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4459.100000] sd 3:0:0:0: [sdb] 8169471 512-byte hardware sectors (4183 MB)
[ 4459.104000] sd 3:0:0:0: [sdb] Write Protect is off
[ 4459.104000] sd 3:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 4459.104000] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 4459.104000]  sdb: sdb1
[ 4459.152000] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 4459.152000] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 4459.156000] sd 3:0:0:1: [sdc] 20479 512-byte hardware sectors (10 MB)
[ 4459.156000] sd 3:0:0:1: [sdc] Write Protect is on
[ 4459.156000] sd 3:0:0:1: [sdc] Mode Sense: 0b 00 80 00
[ 4459.156000] sd 3:0:0:1: [sdc] Assuming drive cache: write through
[ 4459.160000] sd 3:0:0:1: [sdc] 20479 512-byte hardware sectors (10 MB)
[ 4459.160000] sd 3:0:0:1: [sdc] Write Protect is on
[ 4459.160000] sd 3:0:0:1: [sdc] Mode Sense: 0b 00 80 00
[ 4459.160000] sd 3:0:0:1: [sdc] Assuming drive cache: write through
[ 4459.160000]  sdc: unknown partition table
[ 4459.244000] sd 3:0:0:1: [sdc] Attached SCSI removable disk
[ 4459.244000] sd 3:0:0:1: Attached scsi generic sg3 type 0
[ 4536.864000] ndiswrapper version 1.45 loaded (smp=yes)
[ 4536.880000] usbcore: registered new interface driver ndiswrapper
robert@lapek:~$
karta bezprz to oczywiscie Intel PRO/Wireless 3945abg