Linux.pl »

Baza sprzętu »
Rozdajemy Linuksa »
Poczta Linux.pl »
Hosting Linux.pl »

Nowe posty

xx Jak w instalatorze Slackware..... Przejście do zaznaczenia kolejnego skryptu (0)
Wczoraj o 21:53:24
xx Problem ze sterownikami. (5)
2024-04-13, 21:25:16
xx Instalacja xfce4 (2)
2024-04-13, 16:20:17
xx Serie kompilacji bez instalacji dla “emerge” w Gentoo (2)
2024-04-08, 18:40:04
xx Plasma 6 w Neonie ssie trochę mniej ... (17)
2024-04-05, 10:03:46
xx Problem z Linux Lite po instalacji (3)
2024-04-03, 14:23:40
xx Jak właczyć num locka przy starcie systemu debian 12? (12)
2024-04-02, 17:43:54
xx Brak dźwieku w systemie. (5)
2024-04-02, 16:13:41
xx Dystrybucja pod HP Omen (7)
2024-03-29, 11:33:05
xx [Poradnik] Wyszukiwanie Sterowników (2)
2024-03-27, 21:08:23
« poprzedni następny »
Strony: [1] 2   Do dołu

Autor Wątek: opensuse 10.3 mysz nie działa  (Przeczytany 11801 razy)

sheytan

  • Gość
opensuse 10.3 mysz nie działa
« dnia: 2008-01-07, 18:11:39 »
Witam, zainstalowalem dzisiaj susa, przeszedlem przez proces konfiguracji, oczom ukazuje się pulpit. Łapię za myszkę, a ta nawet nie drgnie. Próbowalem już różnych sposobów, przekonfigurować xy, grzebalem w ustawieniach, no doslownie wszystko co mi do glowy przyszło. Myszka działa na Slacku bez problemu. Jakieś sugestie?

pozdro ;p
Zapisane

Offline

  • Users
  • Guru
  • *****
  • Wiadomości: 825
    • Zobacz profil
opensuse 10.3 mysz nie działa
« Odpowiedź #1 dnia: 2008-01-07, 19:02:44 »
Mysz ps czy usb?

M.
Zapisane

sheytan

  • Gość
opensuse 10.3 mysz nie działa
« Odpowiedź #2 dnia: 2008-01-07, 19:23:02 »
srry, zapomnialem napisać. Na ps
Zapisane

Offline

  • Users
  • Guru
  • *****
  • Wiadomości: 825
    • Zobacz profil
opensuse 10.3 mysz nie działa
« Odpowiedź #3 dnia: 2008-01-07, 19:27:26 »
Hmmm pewnie trzeba ręcznie załadować moduł od myszki. Przełącz się na terminal i znajdź moduł który będzie miał w nazwie "ps" i go załaduj.

M.
Zapisane

sheytan

  • Gość
opensuse 10.3 mysz nie działa
« Odpowiedź #4 dnia: 2008-01-07, 19:38:05 »
ha! znajdz :P znajdz gdzie?
Zapisane

arctgx

  • Gość
opensuse 10.3 mysz nie działa
« Odpowiedź #5 dnia: 2008-01-07, 20:15:24 »
Cytat: donmarianno
Hmmm pewnie trzeba ręcznie załadować moduł od myszki.
Też możliwe, ale nie byłbym taki pewny. Sam mam moduł evdev załadowany, ale do teraz nie wiem, dlaczego xorg nie raczy z niego korzystać, kiedy mu go wklepię (patrz ten wątek).

Przeczytaj najpierw to: http://forum.linux.pl/help.php#bbcode

a potem wrzuć w przewijalne okienka zawartości plików /var/log/Xorg.0.log oraz /etc/X11/xorg.conf.

A załadowane moduły pokazuje Ci polecenie lsmod.
Zapisane

norbert_ramzes

  • Gość
opensuse 10.3 mysz nie działa
« Odpowiedź #6 dnia: 2008-01-07, 20:18:07 »
Cytat: sheytan
gdzie?
W /lib/modules/[nazwa twojego kernela]

Albo lepiej najpierw sprawdź czy jest załadowany moduł:

lsmod | grep psmouse

Jeśli nic Ci się nie pokarze to go załaduj np tak:

modprobe psmouse

a potem żeby był ładowany automatycznie przy starcie niezależnie od tego czy myszka jest podpięta czy nie to po prostu dodaj na końcu pliku /etc/modules linijkę z nazwą modułu czyli psmouse.

Jak to nie pomoże to trzeba sprawdzić konfigurację iXsa tzn. /etc/X11/xorg.conf. A tu masz przykład dla ps2:

Kod: [Zaznacz]
Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"                "/dev/input/mice"
        Option          "Protocol"              "ImPS/2"
        Option          "Emulate3Buttons"       "false"
EndSection
PS. W Debianie jest taki bajer do konfiguracji iXsa:

dpkg-reconfigure xserver-xorg
Zapisane

sheytan

  • Gość
opensuse 10.3 mysz nie działa
« Odpowiedź #7 dnia: 2008-01-07, 20:55:25 »
po wpisaniu
Kod: [Zaznacz]
lsmod
nie wyrzuciło zadnej listy zaladowanych modułow, przeszko do kolejnego znaku zachety, po wpisaniu
Kod: [Zaznacz]
modprobe psmouse
wyrzuca, ze nie ma pliku modules.dep w lib/modules/wersja, a plik tam jest.
Zapisane

arctgx

  • Gość
opensuse 10.3 mysz nie działa
« Odpowiedź #8 dnia: 2008-01-07, 21:13:35 »
Czemu nie wrzucisz logu i konfiga, który zaproponowałem Ci wrzucić? Może stamtąd czegoś konkretniejszego się dowiemy, co xorg powiedział o myszy.

Nie chce mi się wierzyć, że masz pustą listę modułów, tzn. wszystkie sterowniki wkompilowane na stałe w jądro, szczególnie to z paczki Suse :) Wykonałeś lsmod z konta roota?
Zapisane

norbert_ramzes

  • Gość
opensuse 10.3 mysz nie działa
« Odpowiedź #9 dnia: 2008-01-07, 21:17:55 »
No właśnie. Spróbuj wykonać wszystkie polecenia jako root.
Zapisane

sheytan

  • Gość
opensuse 10.3 mysz nie działa
« Odpowiedź #10 dnia: 2008-01-07, 21:19:43 »
xorg.conf:
Kod: [Zaznacz]
# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of 
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"  	# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
#    Load        "type1"
    Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
#    Load       "glx"
# This loads the DRI module
#    Load       "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

#    RgbPath	"/usr/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# 

    FontPath   "/usr/share/fonts/misc/"
#    FontPath   "/usr/share/fonts/TTF/"
#    FontPath   "/usr/share/fonts/OTF"
    FontPath   "/usr/share/fonts/Type1/"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath   "/usr/share/fonts/75dpi/"
#    FontPath   "/usr/lib/X11/fonts/local/"
#    FontPath   "/usr/lib/X11/fonts/misc/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/Speedo/"
#    FontPath   "/usr/lib/X11/fonts/Type1/"
#    FontPath   "/usr/lib/X11/fonts/TrueType/"
#    FontPath   "/usr/lib/X11/fonts/freefont/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/"
#    FontPath   "/usr/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the  VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the  server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the / mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option	"Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"	"xorg"
    Option "XkbModel"	"pc104"
    Option "XkbLayout"	"pl"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier	"Mouse1"
    Driver	"mouse"
    Option "Protocol"    "Auto"	# Auto detect
    Option "Device"      "/dev/input/mouse0"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"	"Xqueue"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"	"256"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"	"9600"
#    Option "SampleRate"	"150"

# Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.

    Option "ZAxisMapping"   "4 5 6 7"

# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections 
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice" 
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5 - 57.0

#    HorizSync	30-64         # multisync
#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-100

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier	"Standard VGA"
    VendorName	"Unknown"
    BoardName	"Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset	"generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID      "PCI:0:10:0"

#    VideoRam	256

#    Clocks	25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
    Identifier  "** NVIDIA (generic)                   [nv]"
    Driver      "nv"
    #VideoRam    131072
    # Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "** NVIDIA (generic)                   [nv]"
    Monitor     "My Monitor"
    DefaultDepth 24

    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1024x768"
        ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
#    Mode 0666
# EndSection
xorg.0
Kod: [Zaznacz]
X Window System Version 7.2.0
Release Date: Sat Sep 15 00:09:03 UTC 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux linux-jjma 2.6.21.5-smp #2 SMP Tue Jun 19 14:58:11 CDT 2007 i686
Build Date: 15 September 2007
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan  7 21:41:18 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "My Monitor"
(**) |   |-->Device "** NVIDIA (generic)                   [nv]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81e6560
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 1.2
	X.Org XInput driver : 0.7
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.2
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1a30 card 1849,1a30 rev 11 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,1a31 card 0000,0000 rev 11 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24c2 card 1849,24c0 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1849,24c0 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 1849,24c0 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1849,24c0 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 82 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24c0 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24cb card 1849,24c0 rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:5: chip 8086,24c5 card 1849,4961 rev 02 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0322 card 1554,1152 rev a1 class 03,00,00 hdr 00
(II) PCI: 03:0a:0: chip 10ec,8139 card 1849,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,2), BCTRL: 0x000f (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xddd00000 - 0xdfdfffff (0x2100000) MX[b]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xcdc00000 - 0xddbfffff (0x10000000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 3 I/O range:
	[0] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[b]
	[1] -1	0	0x0000c400 - 0x0000c4ff (0x100) IX[b]
	[2] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[b]
	[3] -1	0	0x0000cc00 - 0x0000ccff (0x100) IX[b]
(II) Bus 3 non-prefetchable memory range:
	[0] -1	0	0xdfe00000 - 0xdfefffff (0x100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV34 [GeForce FX 5200] rev 161, Mem @ 0xde000000/24, 0xd0000000/27, BIOS @ 0xdfde0000/17
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[b]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xdfefff00 - 0xdfefffff (0x100) MX[b]
	[1] -1	0	0xdffff900 - 0xdffff9ff (0x100) MX[b]
	[2] -1	0	0xdffffa00 - 0xdffffbff (0x200) MX[b]
	[3] -1	0	0x30000000 - 0x300003ff (0x400) MX[b]
	[4] -1	0	0xdffffc00 - 0xdfffffff (0x400) MX[b]
	[5] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[6] -1	0	0xdfde0000 - 0xdfdfffff (0x20000) MX[b](B)
	[7] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
	[8] -1	0	0xde000000 - 0xdeffffff (0x1000000) MX[b](B)
	[9] -1	0	0x0000cc00 - 0x0000ccff (0x100) IX[b]
	[10] -1	0	0x0000dc00 - 0x0000dc3f (0x40) IX[b]
	[11] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[b]
	[12] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[b]
	[13] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[b]
	[14] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[b]
	[15] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[b]
	[16] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[b]
	[17] -1	0	0x0000ec00 - 0x0000ec1f (0x20) IX[b]
	[18] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[b]
	[19] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[b]
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xdfefff00 - 0xdfefffff (0x100) MX[b]
	[1] -1	0	0xdffff900 - 0xdffff9ff (0x100) MX[b]
	[2] -1	0	0xdffffa00 - 0xdffffbff (0x200) MX[b]
	[3] -1	0	0x30000000 - 0x300003ff (0x400) MX[b]
	[4] -1	0	0xdffffc00 - 0xdfffffff (0x400) MX[b]
	[5] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[6] -1	0	0xdfde0000 - 0xdfdfffff (0x20000) MX[b](B)
	[7] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
	[8] -1	0	0xde000000 - 0xdeffffff (0x1000000) MX[b](B)
	[9] -1	0	0x0000cc00 - 0x0000ccff (0x100) IX[b]
	[10] -1	0	0x0000dc00 - 0x0000dc3f (0x40) IX[b]
	[11] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[b]
	[12] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[b]
	[13] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[b]
	[14] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[b]
	[15] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[b]
	[16] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[b]
	[17] -1	0	0x0000ec00 - 0x0000ec1f (0x20) IX[b]
	[18] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[b]
	[19] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x2fffffff (0x2ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x2fffffff (0x2ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0xdfefff00 - 0xdfefffff (0x100) MX[b]
	[5] -1	0	0xdffff900 - 0xdffff9ff (0x100) MX[b]
	[6] -1	0	0xdffffa00 - 0xdffffbff (0x200) MX[b]
	[7] -1	0	0x30000000 - 0x300003ff (0x400) MX[b]
	[8] -1	0	0xdffffc00 - 0xdfffffff (0x400) MX[b]
	[9] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[10] -1	0	0xdfde0000 - 0xdfdfffff (0x20000) MX[b](B)
	[11] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
	[12] -1	0	0xde000000 - 0xdeffffff (0x1000000) MX[b](B)
	[13] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[14] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[15] -1	0	0x0000cc00 - 0x0000ccff (0x100) IX[b]
	[16] -1	0	0x0000dc00 - 0x0000dc3f (0x40) IX[b]
	[17] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[b]
	[18] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[b]
	[19] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[b]
	[20] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[b]
	[21] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[b]
	[22] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[b]
	[23] -1	0	0x0000ec00 - 0x0000ec1f (0x20) IX[b]
	[24] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[b]
	[25] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[b]
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules//extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules//extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 7.2.0, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "nv"
(II) Loading /usr/lib/xorg/modules//drivers/nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 2.1.3
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules//input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.2.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules//input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.2.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
	Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
	Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
	GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
	GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
	Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
	GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
	GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
	GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
	GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
	GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
	GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
	Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
	GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
	GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
	GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
	Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
	GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
	Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
	GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
	GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
	GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
	GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
	GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
	GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
	Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
	GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
	GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
	GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
	GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
	GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
	Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
	GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
	GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
	GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
	GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
	Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
	GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
	GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
	GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
	Quadro FX 540, GeForce 6200, GeForce 6500,
	GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
	GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
	GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 6800,
	GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT, GeForce 6200,
	GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
	GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
	GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
	GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
	GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
	GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
	GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
	GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
	Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
	GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
	GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
	Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
	Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
	GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS,
	GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
	GeForce 8600 GT, GeForce 8600M GT, Quadro NVS 320M, GeForce 8500 GT,
	GeForce 8400 GS, GeForce 8300 GS, GeForce 8600M GS, GeForce 8400M GT,
	GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
	Quadro NVS 135M
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset GeForce FX 5200 found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x2fffffff (0x2ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0xdfefff00 - 0xdfefffff (0x100) MX[b]
	[5] -1	0	0xdffff900 - 0xdffff9ff (0x100) MX[b]
	[6] -1	0	0xdffffa00 - 0xdffffbff (0x200) MX[b]
	[7] -1	0	0x30000000 - 0x300003ff (0x400) MX[b]
	[8] -1	0	0xdffffc00 - 0xdfffffff (0x400) MX[b]
	[9] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[10] -1	0	0xdfde0000 - 0xdfdfffff (0x20000) MX[b](B)
	[11] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
	[12] -1	0	0xde000000 - 0xdeffffff (0x1000000) MX[b](B)
	[13] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[14] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[15] -1	0	0x0000cc00 - 0x0000ccff (0x100) IX[b]
	[16] -1	0	0x0000dc00 - 0x0000dc3f (0x40) IX[b]
	[17] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[b]
	[18] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[b]
	[19] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[b]
	[20] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[b]
	[21] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[b]
	[22] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[b]
	[23] -1	0	0x0000ec00 - 0x0000ec1f (0x20) IX[b]
	[24] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[b]
	[25] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[b]
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x2fffffff (0x2ff00000) MX[b]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[4] -1	0	0xdfefff00 - 0xdfefffff (0x100) MX[b]
	[5] -1	0	0xdffff900 - 0xdffff9ff (0x100) MX[b]
	[6] -1	0	0xdffffa00 - 0xdffffbff (0x200) MX[b]
	[7] -1	0	0x30000000 - 0x300003ff (0x400) MX[b]
	[8] -1	0	0xdffffc00 - 0xdfffffff (0x400) MX[b]
	[9] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[10] -1	0	0xdfde0000 - 0xdfdfffff (0x20000) MX[b](B)
	[11] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
	[12] -1	0	0xde000000 - 0xdeffffff (0x1000000) MX[b](B)
	[13] 0	0	0x000a0000 - 0x000affff (0x10000) MS[b]
	[14] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[b]
	[15] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[b]
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[18] -1	0	0x0000cc00 - 0x0000ccff (0x100) IX[b]
	[19] -1	0	0x0000dc00 - 0x0000dc3f (0x40) IX[b]
	[20] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[b]
	[21] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[b]
	[22] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[b]
	[23] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[b]
	[24] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[b]
	[25] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[b]
	[26] -1	0	0x0000ec00 - 0x0000ec1f (0x20) IX[b]
	[27] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[b]
	[28] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[b]
	[29] 0	0	0x000003b0 - 0x000003bb (0xc) IS[b]
	[30] 0	0	0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.2
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "GeForce FX 5200"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 1.2
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xD0000000
(--) NV(0): MMIO registers at 0xDE000000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for analog device on output A...
(--) NV(0):   ...found one
(II) NV(0): Probing for analog device on output B...
(--) NV(0):   ...can't find one
(II) NV(0): Probing for EDID on I2C bus A...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(--) NV(0): DDC detected a CRT:
(II) NV(0): Manufacturer: GSM  Model: 4344  Serial#: 36646
(II) NV(0): Year: 2003  Week: 49
(II) NV(0): EDID Version: 1.3
(II) NV(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) NV(0): Signal levels configurable
(II) NV(0): Sync:  Separate
(II) NV(0): Max H-Image Size [cm]: horiz.: 33  vert.: 25
(II) NV(0): Gamma: 2.85
(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) NV(0): First detailed timing not preferred mode in violation of standard!(II) NV(0): redX: 0.618 redY: 0.329   greenX: 0.295 greenY: 0.600
(II) NV(0): blueX: 0.144 blueY: 0.071   whiteX: 0.283 whiteY: 0.298
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): 720x400@70Hz
(II) NV(0): 720x400@88Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@67Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@87Hz (interlaced)
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): 1152x870@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported Future Video Modes:
(II) NV(0): #0: hsize: 640  vsize 480  refresh: 75  vid: 20273
(II) NV(0): #1: hsize: 640  vsize 480  refresh: 85  vid: 22833
(II) NV(0): #2: hsize: 800  vsize 600  refresh: 75  vid: 20293
(II) NV(0): #3: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) NV(0): #4: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) NV(0): #5: hsize: 1024  vsize 768  refresh: 75  vid: 20321
(II) NV(0): #6: hsize: 1024  vsize 768  refresh: 85  vid: 22881
(II) NV(0): #7: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 94.5 MHz   Image Size:  310 x 230 mm
(II) NV(0): h_active: 1024  h_sync: 1072  h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) NV(0): v_active: 768  v_sync: 769  v_sync_end 772 v_blanking: 808 v_border: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 108.0 MHz   Image Size:  310 x 230 mm
(II) NV(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) NV(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) NV(0): Ranges: V min: 50  V max: 160 Hz, H min: 30  H max: 71 kHz, PixClock max 110 MHz
(II) NV(0): Monitor name: F700B
(II) NV(0): EDID (in hex):
(II) NV(0): 	00ffffffffffff001e6d4443268f0000
(II) NV(0): 	310d0103182119b9e85ad99e544b9924
(II) NV(0): 	12484cfffe80314f3159454f4559714f
(II) NV(0): 	614f61598180ea240060410028303060
(II) NV(0): 	130036e61000001e302a009851002a40
(II) NV(0): 	3070130036e61000001e000000fd0032
(II) NV(0): 	a01e470b000a202020202020000000fc
(II) NV(0): 	0046373030420a2020202020202000a7
(II) NV(0): Probing for EDID on I2C bus B...
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0):   ... none found
(--) NV(0): CRTC 0 appears to have a CRT attached
(II) NV(0): Using CRT on CRTC 0
(II) NV(0): Using hsync ranges from config file
(II) NV(0): Using vrefresh ranges from config file
(II) NV(0): Printing DDC gathered Modelines:
(II) NV(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(II) NV(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(II) NV(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(II) NV(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(II) NV(0): Modeline "640x480"   30.24  640 704 768 864  480 483 486 525 -hsync -vsync
(II) NV(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(II) NV(0): Modeline "720x400"   35.50  720 738 846 900  400 421 423 449 -hsync -vsync
(II) NV(0): Modeline "720x400"   28.32  720 738 846 900  400 412 414 449 -hsync +vsync
(II) NV(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
(II) NV(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync
(II) NV(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(II) NV(0): Modeline "1024x768"   44.90  1024 1032 1208 1264  768 768 776 817 interlace +hsync +vsync
(II) NV(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
(II) NV(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(II) NV(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(II) NV(0): Modeline "1152x864"  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync
(II) NV(0): Modeline "640x480"   30.75  640 664 728 816  480 483 487 504 -hsync +vsync
(II) NV(0): Modeline "640x480"   35.00  640 664 728 816  480 483 487 507 -hsync +vsync
(II) NV(0): Modeline "800x600"   49.00  800 840 920 1040  600 603 607 629 -hsync +vsync
(II) NV(0): Modeline "800x600"   56.75  800 848 928 1056  600 603 607 633 -hsync +vsync
(II) NV(0): Modeline "1152x864"  104.00  1152 1224 1344 1536  864 867 871 905 -hsync +vsync
(II) NV(0): Modeline "1024x768"   82.00  1024 1088 1192 1360  768 771 775 805 -hsync +vsync
(II) NV(0): Modeline "1024x768"   94.50  1024 1096 1200 1376  768 771 775 809 -hsync +vsync
(II) NV(0): Modeline "1280x1024"  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync
(II) NV(0): Modeline "1024x768"   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync
(II) NV(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync
(--) NV(0): VideoRAM: 131072 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): My Monitor: Using hsync range of 31.50-57.00 kHz
(II) NV(0): My Monitor: Using vrefresh range of 50.00-100.00 Hz
(II) NV(0): Clock range:  12.00 to 350.00 MHz
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (hsync out of range)
(II) NV(0): Not using default mode "1152x864" (hsync out of range)
(II) NV(0): Not using default mode "576x432" (hsync out of range)
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "1400x1050" (hsync out of range)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(II) NV(0): Not using default mode "1400x1050" (hsync out of range)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(II) NV(0): Not using default mode "1600x1024" (hsync out of range)
(II) NV(0): Not using default mode "800x512" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using driver mode "1024x768" (hsync out of range)
(II) NV(0): Not using driver mode "1152x864" (hsync out of range)
(II) NV(0): Not using driver mode "1152x864" (hsync out of range)
(II) NV(0): Not using driver mode "1024x768" (hsync out of range)
(II) NV(0): Not using driver mode "1024x768" (hsync out of range)
(II) NV(0): Not using driver mode "1280x1024" (hsync out of range)
(II) NV(0): Not using driver mode "1024x768" (hsync out of range)
(II) NV(0): Not using driver mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "1152x768" (width too large for virtual size)
(--) NV(0): Virtual size is 1024x768 (pitch 1024)
(**) NV(0): *Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) NV(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync
(**) NV(0):  Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) NV(0):  Driver mode "1024x768": 44.9 MHz, 35.5 kHz, 86.9 Hz (I)
(II) NV(0): Modeline "1024x768"   44.90  1024 1032 1208 1264  768 768 776 817 interlace +hsync +vsync
(**) NV(0):  Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) NV(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync
(**) NV(0):  Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) NV(0):  Default mode "1024x768": 44.9 MHz, 35.5 kHz, 86.9 Hz (I)
(II) NV(0): Modeline "1024x768"   44.90  1024 1032 1208 1264  768 768 776 817 interlace +hsync +vsync
(**) NV(0):  Driver mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) NV(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
(**) NV(0):  Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) NV(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
(**) NV(0):  Driver mode "800x600": 56.8 MHz, 53.7 kHz, 84.9 Hz
(II) NV(0): Modeline "800x600"   56.75  800 848 928 1056  600 603 607 633 -hsync +vsync
(**) NV(0):  Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(**) NV(0):  Driver mode "800x600": 49.0 MHz, 47.1 kHz, 74.9 Hz
(II) NV(0): Modeline "800x600"   49.00  800 840 920 1040  600 603 607 629 -hsync +vsync
(**) NV(0):  Driver mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) NV(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) NV(0):  Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) NV(0):  Driver mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) NV(0):  Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) NV(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) NV(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(**) NV(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) NV(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) NV(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) NV(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) NV(0):  Driver mode "640x480": 35.0 MHz, 42.9 kHz, 84.6 Hz
(II) NV(0): Modeline "640x480"   35.00  640 664 728 816  480 483 487 507 -hsync +vsync
(**) NV(0):  Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) NV(0):  Driver mode "640x480": 30.8 MHz, 37.7 kHz, 74.8 Hz
(II) NV(0): Modeline "640x480"   30.75  640 664 728 816  480 483 487 504 -hsync +vsync
(**) NV(0):  Driver mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) NV(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(**) NV(0):  Driver mode "640x480": 30.2 MHz, 35.0 kHz, 66.7 Hz
(II) NV(0): Modeline "640x480"   30.24  640 704 768 864  480 483 486 525 -hsync -vsync
(**) NV(0):  Driver mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NV(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) NV(0):  Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) NV(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(**) NV(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) NV(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) NV(0): Modeline "640x480"   31.50  640 664 704 832  480 489 492 520 -hsync -vsync
(**) NV(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) NV(0): Modeline "640x480"   25.18  640 656 752 800  480 490 492 525 -hsync -vsync
(**) NV(0):  Driver mode "720x400": 35.5 MHz, 39.4 kHz, 87.8 Hz
(II) NV(0): Modeline "720x400"   35.50  720 738 846 900  400 421 423 449 -hsync -vsync
(**) NV(0):  Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
(II) NV(0): Modeline "720x400"   28.32  720 738 846 900  400 412 414 449 -hsync +vsync
(**) NV(0):  Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) NV(0): Modeline "720x400"   35.50  720 756 828 936  400 401 404 446 -hsync +vsync
(**) NV(0):  Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) NV(0): Modeline "640x400"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) NV(0):  Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) NV(0): Modeline "640x350"   31.50  640 672 736 832  350 382 385 445 +hsync -vsync
(**) NV(0):  Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) NV(0): Modeline "576x384"   32.50  576 589 657 736  384 385 388 403 doublescan +hsync +vsync
(**) NV(0):  Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) NV(0): Modeline "512x384"   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync
(**) NV(0):  Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "512x384"   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync
(**) NV(0):  Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.6 Hz (D)
(II) NV(0): Modeline "512x384"   22.45  512 516 604 632  384 384 388 409 interlace doublescan +hsync +vsync
(**) NV(0):  Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) NV(0): Modeline "416x312"   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync
(**) NV(0):  Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "400x300"   28.15  400 416 448 524  300 300 302 315 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "400x300"   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) NV(0): Modeline "400x300"   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) NV(0): Modeline "400x300"   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) NV(0): Modeline "400x300"   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync
(**) NV(0):  Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) NV(0): Modeline "320x240"   18.00  320 348 376 416  240 240 242 254 doublescan -hsync -vsync
(**) NV(0):  Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "320x240"   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync
(**) NV(0):  Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) NV(0): Modeline "320x240"   15.75  320 332 352 416  240 244 246 260 doublescan -hsync -vsync
(**) NV(0):  Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "320x240"   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync
(**) NV(0):  Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) NV(0): Modeline "360x200"   17.75  360 378 414 468  200 200 202 223 doublescan -hsync +vsync
(**) NV(0):  Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "320x200"   15.75  320 336 368 416  200 200 202 222 doublescan -hsync +vsync
(**) NV(0):  Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "320x175"   15.75  320 336 368 416  175 191 192 222 doublescan +hsync -vsync
(**) NV(0): Display dimensions: (330, 250) mm
(**) NV(0): DPI set to (78, 78)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.2.0
	ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[b]
	[1] 0	0	0xde000000 - 0xdeffffff (0x1000000) MX[b]
	[2] -1	0	0x00100000 - 0x2fffffff (0x2ff00000) MX[b]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
	[6] -1	0	0xdfefff00 - 0xdfefffff (0x100) MX[b]
	[7] -1	0	0xdffff900 - 0xdffff9ff (0x100) MX[b]
	[8] -1	0	0xdffffa00 - 0xdffffbff (0x200) MX[b]
	[9] -1	0	0x30000000 - 0x300003ff (0x400) MX[b]
	[10] -1	0	0xdffffc00 - 0xdfffffff (0x400) MX[b]
	[11] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[b]O
	[12] -1	0	0xdfde0000 - 0xdfdfffff (0x20000) MX[b](B)
	[13] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
	[14] -1	0	0xde000000 - 0xdeffffff (0x1000000) MX[b](B)
	[15] 0	0	0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
	[16] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
	[17] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
	[18] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
	[19] -1	0	0x00000000 - 0x000000ff (0x100) IX[b]
	[20] -1	0	0x0000cc00 - 0x0000ccff (0x100) IX[b]
	[21] -1	0	0x0000dc00 - 0x0000dc3f (0x40) IX[b]
	[22] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[b]
	[23] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[b]
	[24] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[b]
	[25] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[b]
	[26] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[b]
	[27] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[b]
	[28] -1	0	0x0000ec00 - 0x0000ec1f (0x20) IX[b]
	[29] -1	0	0x0000e800 - 0x0000e81f (0x20) IX[b]
	[30] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[b]
	[31] 0	0	0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
	[32] 0	0	0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(==) NV(0): Write-combining range (0xd0000000,0x8000000)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Scanline Image Writes
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/input/mouse0"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mouse0"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Mouse1: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc104"
(**) Keyboard1: XkbModel: "pc104"
(**) Option "XkbLayout" "pl"
(**) Keyboard1: XkbLayout: "pl"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
tak, wykonałem z konta roota (su) nie od dzis siedzie na linuksie :PP
Zapisane

Offline Robert

  • Administrator
  • Guru
  • *****
  • Wiadomości: 2516
    • Zobacz profil
opensuse 10.3 mysz nie działa
« Odpowiedź #11 dnia: 2008-01-07, 21:25:21 »
W suse lsmod idzie również bez roota. A tak z ciekawości u mnie na suse 10.2 po wpisaniu lsmod nie wypluło niczego, co by zawierało ciąg "ps", a tez mam myszkę na ps.
Zapisane
Zanim popełnisz grafomaństwo: 1 | 2 | 3
Baza RPM Jak szukać informacji

norbert_ramzes

  • Gość
opensuse 10.3 mysz nie działa
« Odpowiedź #12 dnia: 2008-01-07, 21:29:21 »
Spróbuj przeinstalować jajko z paczki.

A wcześniej pokaż wynik poleceń:

uname -a

ls /lib/modules

du -h /lib/modules | tail -2 (to może trochę potrwać)
Zapisane

sheytan

  • Gość
opensuse 10.3 mysz nie działa
« Odpowiedź #13 dnia: 2008-01-07, 21:30:57 »
Ok, to jutro, bo dzisiaj już nie mam czasu, a nie przyjemnie jest tak 'latac' ze Slacka na Susa i spowrotem :PP
Zapisane

Offline Robert

  • Administrator
  • Guru
  • *****
  • Wiadomości: 2516
    • Zobacz profil
opensuse 10.3 mysz nie działa
« Odpowiedź #14 dnia: 2008-01-07, 22:14:46 »
Cytuj
nie przyjemnie jest tak 'latac' ze Slacka na Susa i spowrotem :PP
Co do tych ostatnich 2 to sie obędzie bez latania w prosty sposób. Wystarczy podmontowac partycję i podać adres tych plików na podmontowanej partycji.
Zapisane
Zanim popełnisz grafomaństwo: 1 | 2 | 3
Baza RPM Jak szukać informacji
Strony: [1] 2   Do góry
« poprzedni następny »