Przyspieszenie startu Gentoo

[OneGhost]

Witam. Chciałbym w jakiś sposób przyspieszyć start gentoo, bo jest przerażająco długi - około 1 minuta 30 sekund od wybrania w grub, do uruchomienia kde. Sprzęt jaki posiadam to:
Intel Core 2 duo E6600
2GB ramu
GF8800 GTS
Dysk SATAII
Płyta Gigabyte 965P-S3

Trochę to chyba jak na taki sprzęt za długo. Czytałem artykuły o tym jak gentoo przyspieszyć i wprowadziłem kilka zmian, ale niewiele one pomogły. Wydaje mi się, że coś powinienem zmienić w kernelu, tylko nie bardzo wiem co. Mam włączony bootsplash. Z tego co zauważyłem, to najdłużej zatrzymuje się na początku (Initalizing kernel...), potem po "Loading modules" i po "Activating mdev".

Może ktoś zaproponować jakieś zmiany, które przyspieszą start? I jeśli ktoś ma gentoo, to jak długo się włącza?

Mój dmesg:

Kod: [Zaznacz]

Linux version 2.6.22-gentoo-r5 (root@OneGhostPC) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.1)) #1 SMP PREEMPT Mon Oct 1 00:46:35 CEST 2007
Command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/hda2 udev video=vesafb all-generic-ide ahci=on acpi=on vga=791 splash=silent,theme:gentoo-blue CONSOLE=/dev/tty1 quiet
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
 BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
 BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
 BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Malformed early option 'acpi'
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 524000) 1 entries of 3200 used
end_pfn_map = 1048576
DMI 2.4 present.
ACPI: RSDP 000F6CF0, 0014 (r0 GBT   )
ACPI: RSDT 7FEE3040, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
ACPI: FACP 7FEE30C0, 0074 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
ACPI: DSDT 7FEE3180, 49F4 (r1 GBT    GBTUACPI     1000 MSFT  100000C)
ACPI: FACS 7FEE0000, 0040
ACPI: HPET 7FEE7CC0, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU       98)
ACPI: MCFG 7FEE7D40, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
ACPI: APIC 7FEE7BC0, 0084 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
ACPI: SSDT 7FEE7DC0, 015C (r1  PmRef  Cpu0Ist     3000 INTL 20040311)
ACPI: SSDT 7FEE8250, 0275 (r1  PmRef    CpuPm     3000 INTL 20040311)
No NUMA configuration found
Faking a node at 0000000000000000-000000007fee0000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 524000) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000007fee0000
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1048576
early_node_map[2] active PFN ranges
    0:        0 ->      159
    0:      256 ->   524000
On node 0 totalpages: 523903
  DMA zone: 56 pages used for memmap
  DMA zone: 2620 pages reserved
  DMA zone: 1323 pages, LIFO batch:0
  DMA32 zone: 7108 pages used for memmap
  DMA32 zone: 512796 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
SMP: Allowing 4 CPUs, 2 hotplug CPUs
PERCPU: Allocating 36808 bytes of per cpu data
Built 1 zonelists.  Total pages: 514119
Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/hda2 udev video=vesafb all-generic-ide ahci=on acpi=on vga=791 splash=silent,theme:gentoo-blue CONSOLE=/dev/tty1 quiet
IDE generic will claim all unknown PCI IDE storage controllers.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Detected 2400.002 MHz processor.
Console: colour dummy device 80x25
Checking aperture...
Memory: 2049740k/2096000k available (3158k kernel code, 45872k reserved, 1298k data, 324k init)
Calibrating delay using timer specific routine.. 4802.68 BogoMIPS (lpj=2401342)
Security Framework v1.0.0 initialized
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 0/0 -> Node 0
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 16666667
Detected 16.666 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4799.88 BogoMIPS (lpj=2399943)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
migration_cost=24
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000 - e3ffffff
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
pnp: 00:09: ioport range 0x400-0x4bf could not be reserved
pnp: 00:0a: iomem range 0xe0000000-0xe3ffffff could not be reserved
pnp: 00:0b: iomem range 0xd3000-0xd3fff has been reserved
pnp: 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
pnp: 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:0b: iomem range 0xfc000-0xfffff could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: 8000-8fff
  MEM window: e4000000-e7ffffff
  PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:1c.0
  IO window: 7000-7fff
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
  IO window: 9000-afff
  MEM window: ea000000-ea0fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
  IO window: b000-bfff
  MEM window: e8000000-e9ffffff
  PREFETCH window: 80000000-800fffff
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: ea100000-ea1fffff
  PREFETCH window: ea200000-ea2fffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
Time: tsc clocksource has been installed.
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 6428k freed
audit: initializing netlink socket (disabled)
audit(1191247919.545:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
Allocate Port Service[0000:00:1c.4:pcie03]
Linux agpgart interface v0.102 (c) Dave Jones
vesafb: framebuffer at 0xe5000000, mapped to 0xffffc20004b80000, using 3072k, total 14336k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fbsplash: console 0 using theme 'gentoo-blue'
fbsplash: switched splash state to 'on' on console 0
fb0: VESA VGA frame buffer device
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: Processor [CPU0] (supports 2 throttling states)
ACPI: SSDT 7FEE81C0, 0087 (r1  PmRef  Cpu1Ist     3000 INTL 20040311)
ACPI: Processor [CPU1] (supports 2 throttling states)
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: module loaded
Linux video capture interface: v2.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Unknown: IDE controller at PCI slot 0000:00:1f.2
ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 19
Unknown: chipset revision 2
Unknown: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: SAMSUNG HD080HJ, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Unknown: IDE controller at PCI slot 0000:00:1f.5
ACPI: PCI Interrupt 0000:00:1f.5[b] -> GSI 19 (level, low) -> IRQ 19
Unknown: chipset revision 2
Unknown: 100% native mode on irq 19
    ide2: BM-DMA at 0xe800-0xe807, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xe808-0xe80f, BIOS settings: hdg:pio, hdh:pio
Probing IDE interface ide2...
Probing IDE interface ide3...
Unknown: IDE controller at PCI slot 0000:03:00.1
ACPI: PCI Interrupt 0000:03:00.1[b] -> GSI 16 (level, low) -> IRQ 16
Unknown: chipset revision 2
Unknown: 100% native mode on irq 16
    ide4: BM-DMA at 0xa000-0xa007, BIOS settings: hdi:pio, hdj:pio
    ide5: BM-DMA at 0xa008-0xa00f, BIOS settings: hdk:pio, hdl:pio
Probing IDE interface ide4...
hdi: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
ide4 at 0x9000-0x9007,0x9402 on irq 16
Probing IDE interface ide5...
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide5...
hda: max request size: 512KiB
hda: Host Protected Area detected.
        current capacity is 156299375 sectors (80025 MB)
        native  capacity is 156301488 sectors (80026 MB)
hda: Host Protected Area disabled.
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63<4>hda: host side 80-wire cable detection failed, limiting max speed to UDMA33

hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4 < hda5 >
hdi: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ahci 0000:03:00.0: version 2.2
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 19
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 cmd 0xffffc20000328100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
ata2: SATA max UDMA/133 cmd 0xffffc20000328180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xea304000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xea305000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c400
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c800
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-2: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
Initializing USB Mass Storage driver...
usb 3-2: new full speed USB device using uhci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
usb 7-1: new low speed USB device using uhci_hcd and address 2
usb 7-1: configuration #1 chosen from 1 choice
usb 7-2: new low speed USB device using uhci_hcd and address 3
usb 7-2: configuration #1 chosen from 1 choice
usb 2-2.1: new full speed USB device using ehci_hcd and address 5
usb 2-2.1: configuration #1 chosen from 1 choice
hub 2-2:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
hub 2-2:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
hub 2-2:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
hub 2-2:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation 
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 324k freed
ata1: soft resetting port
ata1: SATA link down (SStatus 0 SControl 300)
ata1: EH complete
usbcore: registered new interface driver hiddev
input: MOSART Semi. Input Device as /class/input/input2
input: USB HID v1.10 Keyboard [MOSART Semi. Input Device] on usb-0000:00:1d.2-1
input: MOSART Semi. Input Device as /class/input/input3
input: USB HID v1.10 Mouse [MOSART Semi. Input Device] on usb-0000:00:1d.2-1
input: MOSART Semi. Wireless Keyboard & Mouse as /class/input/input4
input: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:1d.2-2
input: MOSART Semi. Wireless Keyboard & Mouse as /class/input/input5
input,hiddev96: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:1d.2-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
input: PC Speaker as /class/input/input6
Real Time Clock Driver v1.12ac
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x2D11
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usbcore: registered new interface driver hci_usb
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:04:00.0 to 64
sky2 0000:04:00.0: v1.14 addr 0xe9000000 irq 16 Yukon-EC Ultra (0xb4) rev 2
sky2 eth0: addr 00:1a:4d:67:32:8b
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 19
bttv0: Bt878 (rev 2) at 0000:05:01.0, irq: 19, latency: 32, mmio: 0xea200000
bttv0: detected: (Askey Magic/others) TView99 CPH06x [card=38], PCI subsystem ID is 144f:3000
bttv0: using: Prolink PixelView PlayTV pro [card=37,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00feefff [init]
bttv0: using tuner=5
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner 1-0060: All bytes are equal. It is not a TEA5767
tuner 1-0060: chip found @ 0xc0 (bt878 #0 [sw])
tuner 1-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
tuner 1-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:05:01.1[A] -> GSI 19 (level, low) -> IRQ 19
bt878_probe: card id=[0x3000144f], Unknown card.
Exiting..
ACPI: PCI interrupt for device 0000:05:01.1 disabled
bt878: probe of 0000:05:01.1 failed with error -22
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  100.14.09  Sat May 26 00:43:07 PDT 2007
EXT3 FS on hda2, internal journal
Realtime LSM initialized (no groups, mlock=1)
QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard
KQEMU installed, max_locked_mem=1028248kB.
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 3911788k swap on /dev/hda5.  Priority:-1 extents:1 across:3911788k
sky2 eth0: enabling interface
sky2 eth0: ram buffer 0K
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
hci_usb_isoc_rx_submit: hci0 isoc rx submit failed urb ffff81007d218628 err -38
hci_usb_isoc_rx_submit: hci0 isoc rx submit failed urb ffff81007d218628 err -38
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present

Nie widzę wiele możliwości aby coś w tym zmienić
OpenSuse 10.3 szybko startuje

M.

[mandylion]

czesc
nie rozumiem jaka jest potrzeba tylu i takich parametrow w lini komend jajka ...

pozdrawiam

Standardowe paramtery które nic nie zmienią a nawet jeśli to minimalnie

M.

A jakie usługi uruchamiają Ci się przy starcie?

M.

[mandylion]

hmm , parametry jadra stanadardowe .. hmm ok
jak kompilowales jajko , z reki czy genkernel ..

Tu chyba nie leży problem w czasie uruchamiania jądra tylko tego, że:
1) ładowanie modułów do dysku trochę trwa - wykonuje seek po kanałach
2) dużo portów usb.
Nie bardzo jest jak to zmienić - chyba, że wyłączyć.

Mariusz.

[chmooreck]

masz włączone uruchamianie równoległe (chodzi o skrypty startowe) ?
ustawienia sieci masz z DHCP, czy statycznie ?
jakie masz aktualnie uruchamiane usługi na starcie systemu ? może część jest ci niepotrzebna i można wyłączyć ?

[mandylion]

Hej
hmm nie odpowiedziales mi na pytanie albo sam juz sobie odpowiedziales.

Pozdrawiam

[OneGhost]

A jakie usługi uruchamiają Ci się przy starcie?

M.

Kod: [Zaznacz]

 alsasound |      default
           bluetooth |      default
            bootmisc | boot
             checkfs | boot
           checkroot | boot
               clock | boot
         consolefont | boot
          consolekit |
         crypto-loop |
               cupsd |      default
                dbus |      default
       device-mapper |
             dnsextd |
              esound |
          fancontrol |
            festival |
          git-daemon |
                 gpm |
                hald |      default
             hddtemp |
              hdparm |      default
            hostname | boot
             keymaps | boot
                lisa |
          lm_sensors |      default
               local |      default nonetwork
          localmount | boot
               mdnsd |
  mDNSResponderPosix |
             modules | boot
               mysql |
        mysqlmanager |
         mythbackend |
                 nas |
            net.eth0 |      default
              net.lo | boot
            netmount |      default
                nscd |
             numlock |
             pwcheck |
             reslisa |
           rmnologin | boot
              rsyncd |
               samba |
           saslauthd |
              splash |
                sshd |
            svnserve |
           syslog-ng |      default
      udev-postmount |
             urandom | boot
          vixie-cron | boot
                 xdm | boot
              xinetd |      default
              xprint |

hmm , parametry jadra stanadardowe .. hmm ok
jak kompilowales jajko , z reki czy genkernel ..

genkernel

masz włączone uruchamianie równoległe (chodzi o skrypty startowe) ?
ustawienia sieci masz z DHCP, czy statycznie ?
jakie masz aktualnie uruchamiane usługi na starcie systemu ? może część jest ci niepotrzebna i można wyłączyć ?

RC_PARALLEL_STARTUP="no"
Miałem przez jakiś czas włączone, ale nie wiele to pomagało więc wyłączyłem
Przez dhcp, ale ładowanie sieci trwa tylko chwileczkę.
Usługi narazie odkładam na drugi plan, bo zanim dijdzie do ich wczytwania, to komputer stoi bardzo długo, więc one też niewiele tu robią.

Ręczna kompliacja kernela pomaga?

Po co masz "netmount"?? Montujesz coś po sieci?
Tak się składa, że mam bardzo podobny sprzęt z tą różnicą że zamiast płyty 965P mam 965G i tu jest mały szkopuł jeśli chodzi o różnicę P <-> G.
Otóż chipset G obsługuje wszystkie funkcje związane z Core 2 due takie jak pełne wsparcie dla wirtualizacji oraz dla obsługi dwu lub więcej rdzeni. Mam nadzieję, że to nie wpływa na wydajność twojego komputera bo u mnie wszystko szybko i ładnie startuje.


Mariusz

P.S. Będę się upierał nadal, że kernel nie ma znaczenia tylko udev który potem startuje. Wyłącz na chwilę w bios'ie usb i zobacz jak będzie. Masz flopa? Trochę to spowalnia.

[OneGhost]

Po co masz "netmount"?? Montujesz coś po sieci?
Tak się składa, że mam bardzo podobny sprzęt z tą różnicą że zamiast płyty 965P mam 965G i tu jest mały szkopuł jeśli chodzi o różnicę P <-> G.
Otóż chipset G obsługuje wszystkie funkcje związane z Core 2 due takie jak pełne wsparcie dla wirtualizacji oraz dla obsługi dwu lub więcej rdzeni. Mam nadzieję, że to nie wpływa na wydajność twojego komputera bo u mnie wszystko szybko i ładnie startuje.


Mariusz

P.S. Będę się upierał nadal, że kernel nie ma znaczenia tylko udev który potem startuje. Wyłącz na chwilę w bios'ie usb i zobacz jak będzie. Masz flopa? Trochę to spowalnia.

Mógłbyś mi podesłać Twoją konfigurację kernela? Spróbuję ją trochę dostosować do swoich potrzeb i może to coś da.

Niestety nie mogę Ci podesłać bo już nie używam Gentoo tylko openSuse.
Ale będę się upierał, że nie jest to wina jądra!
A właśnie! Wiem jak to sprawdzić! Zmień w menu.lst albo lepiej dodaj identyczny wpis tylko zmień wpis z initrd na coś innego lub go zakomentuj i restart z nowym wpisem - będziesz wiedział ile czasu jądro się ładuje!

Mariusz

[OneGhost]

Floopa nie mam. Po wyłączeniu USB kilka sekund uzyskałem, ale nadal niewiele

A po zmianie w grubie na złe initrd jaki masz czas startu samego jądra?

M